Maintenance and repair works to the corporation quarters at Thadagam Road in ward no. 72 West Zone.

Amount

Dismantling the exising damaged cement concrete as per the direction of departmental officers

Scrapping the existing damaged plastered surface as per the direction of departmental officers

Earth work excavation in all kinds of soil including sand, silt wet sand under water, back cotton, stiff black, cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc excepting all kinds of rock and boulders exceeding 0.014cum in volume including rough

Plain cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hardbroken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc complete

Plain cement concrete 1:2:4 (one cement, two sand and four aggregate) using 20mm gauge hard broken granite stone jelly for AII CC items of work excluding centering shuttering, and cost of reinforcement grill but including curing finishing

Providing chemical treatment for the damaged exposed surfaces with two coats of polymer based cementious coating and then applying two coats of eastomeric coating on the surface incuidng cleaning etc complete

Providing terrace flooring with pressed tiles in cement mortor 1:3 mix(one cement three sand) with water proofing compound including pointing with color cement etc complete

Flooring finishing with first quality design ceramicglazed tiles of all colours of size 305cmx305cmx6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finshing the jointing and painting flush with tiles surface etc complete

Daddoing the walls with first quality color glazed tiles of 150x150x6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cemetn using 0.40kg/1m2 including insihing the jointing and painting flush with tiles surface etc complete 10m2

Paving the floor with vitrified floor tiles of size 60x60cm of approved brand and color marbonite tiles in all floors base ayer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality marbonite tiles of size 60x60cm and point with colour cemnet neatly and fixed in position so as to make perfectly smooth and to alignment etc complete complying with standard specification.

Brick work in cement mortor 1:5 mix (one. cement,five sand) using II class table moulded bricks to a size of 9"x4 3/8"x2 3/4" including cost and conveyance of all materials and labour charges for mixing the mortor, constructing, curing to required period and wherever the masonry projection is necessary for elevation shall be done with out extra cost etc complete as per

Plastering in cement mortor 1:5 mix (one cement,three sand) 12mm thick including cost and conveyance of all materials and labour charges for mixing the martor, and the surface rubbed for smooth and curing to required period, etc complete as per std Specification.

Plastering with cement mortor 1:3 mix (1 part cement and 3 part sand) for dubbing with chemical Treatment and finishing with the same mortar of 12mm thick including scaffolding etc complete

Supply and fixing of color wash basin of standard size and approved brand including labour charges for fixing in position etc complete

Painting with emulsion paint two coats over base coat of approved color and brand

Painting with enamel paint two coats over base coat of appoved color and brand color for old iron

Supply and fixing of HDPE tank of ISI standard and best quality

Wiring with 2x1.5sq.mm (22/0.3)PVC insulated single core unsheatherd copper condctor cable of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch box and 5A FT switch with painting of suitable colour contionus earth wire connection s of 14SWG TC wire for light point (SD 1)

Supply and fixing of 1'20W LED tube light fitting of approved brand inlcuidng labour charges for fixing in wal and ceiling with necessary accessories like clips,screw etc complete

supply and fixing of 1200mm (48'') AC ceiling fan complete with energy saving fan of 28 watts, regulator with 0.3 meter down rod on the existing clamp of approved brand and quality etc complete

Supply and fixing of street light of 30 W LED bulb of approved brand and quality with required materials like pipe clamp etc

Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 150mm x100mmx113mm TW switch box with 3mm thick hylum sheet cover for 5A.3PIn

Wiring with 2x4 Sq.mm (56/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 150mm x100mmx113mm TW switch box with 3mm thick hylum sheet cover for 15A.3PIn non inter locking CS plug with continuous earth

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of

Supply and fixing of WT bulk head fitting with quard suitable for 11 W CFL lamp with CFL

B KANAGARAJ