REPAIR MAINTENANCE TO SANITARY FITTINGS PLUMBING FLOORING PLINTH PROTECTION JOINERY ROOF TREATMENT PERIODICALS AND CONNECTED ITEMS IN ZONE-I AREA UNDER AGE B/R-I OF GE JAIPUR

Amount

Taking down shutters of any description of area exc 1 sqm but n exc 2sqm each complete all as specified and directed.

Taking down of shutters of any description exc 2 sqm each complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete Fe 410W (Gde- E- 250) quality B complete all as specified and directed. Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710 complete all as specified and directed. The size of rails and style shall be as per IS-1003.

S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and as directed by Engineer in Charge. The size of members of shutters shall be as specified in MES SSR Part-I.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer in Charge. The size of members of shutters shall be as specified in MES SSR Part-I.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing given in SSR Part-I complete as directed and specified.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F factory made steel ventilator with top hung shutter including hinges, steel peg stay and handle complete including taking down old ventilator all as specified and as directed.

S&F 300mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as specified and as directed by Engineer in Charge. .

S&F in repair 300mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as specified and as directed by Engineer in Charge. .

S & F 150mm long aluminium handles, cast type anodised complete all as specified and as directed by Engineer in Charge.

S & F in repair 150mm long aluminium handles, cast type anodised complete all as specified and as directed by Engineer in Charge.

S & F 100mm long aluminium handles, cast type anodised complete all as specified and as directed by Engineer in Charge.

S & F in repair 100mm long aluminium handles, cast type anodised complete all as specified and as directed by Engineer in Charge.

S & F 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete all as specified and as directed by Engineer in Charge.

S & F in repair 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete all as specified and as directed by Engineer in Charge.

S & F 150mm long aluminium anodised barrel tower bolts of extruded sectionand fixed complete all as specified and as directed by Engineer in Charge.

S & F in repair 150mm long aluminium anodised barrel tower bolts of extruded sectionand fixed complete all as specified and as directed by Engineer in Charge.

S & F 100 mm butt hinges medium weight cold rolled stainless steel and fixed complete all as specified and as directed by Engineer in Charge.

S & F in repair 100 mm butt hinges medium weight cold rolled stainless steel and fixed complete all as specified and as directed by Engineer in Charge.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and Refixing in same position including Resecuring or easing & adjusting complete all as specified and directed by Engineer-in-Charge.

S & F in repairs aluminium door stopper 100 mm size with double pin and rubber shoe fixed to bottom rail of door shutter complete all as specified and as directed by Engineer in Charge.

S & F galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer in Charge.

S & F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples as to replace the old wire mesh complete all as specified and as directed by Engineer in Charge.

M&L cutting holes in stone walls built in cement mortar for inserting hold fast or lugs incl making good to distrubed portion in CM 1:3 or PCC 1:2:4 type B1 as required complete all as specified.

S&F sheet glass 3.00mm thick ordinary quality and glazing with aluminium beads and neoprene gasket fixed with metal panel pin in square n.exc 0.5 Sqm each including hacking out old broken glass complete all as specified and as directed.

S&F sheet glass 3.00mm thick frosted or obscrued quality and glazing with aluminium beads and neoprene gasket fixed with metal panel pin in square n.exc 0.5 Sqm each including hacking out old broken glass complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;drainage crossings, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (Ist quality) over a coat of pink primer complete all as specified and as directed.

M&L for prearation of new steel surface of any description, over 10cm in width and girth not otherwise described and applying two coat of synthetic enamel paint (Ist quality) over one coat of red oxide (zinc chrome) primer complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for door , windows, ventilators with one or more rebates incl jointing cleat for fixing etc complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed by Engineer in Charge.

S&F anodised aluminium window and ventilator shutters, side hung type without sash, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium fittings such as peg stays 150mm long 1 No, hinges type B-21, 100mm long (2 No) suitable handle 1 No complete all as specified and as directed by Engineer in Charge.

S&F aluminium grill of size 50mm x 50mm size of mesh and 6mm dia fixed complete to existing frame complete all as specified and as directed by Engineer in Charge.

M&L for 09 mm thick prelaminated particle board interior grade, prelaminated both side with decorative choice lamination fixed with screw complete all as specified and as directed by Engineer in Charge.

S& F in repair for 09 mm thick prelaminated particle board interior grade, prelaminated both side with decorative choice lamination fixed with screw complete all as specified and as directed by Engineer in Charge. .

S&F 4mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as specified and directed.

S&F 4mm thick frosted or obscrued sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete all as specified and directed.

M&L for solar control film 25micron reflective type sticked to glass panes as per instruction of manufaturer complete all as specified and as directed by Engineer in Charge. .

S & F brass mortice lock verticle type size 100mm, 4 levers with escutcheon plates and two keys fixed in aluminium frame complete all as specified and as directed by Engineer in Charge. .

S & F in repair brass mortice lock verticle type size 65mm, 4 levers with escutcheon plates and two keys fixed in aluminium frame complete all as specified and as directed by Engineer in Charge. .

F&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer in Charge.

S&F in repair Door closer aluminium anodized extruded section body hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg as in repairs complete all as specified and as directed by Engineer in Charge. .

Taking down cement plaster or cement lime plaster/ tiles of any descrption on PCC/ stone surface/ brick surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer in Charge.

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 5 mm thick on concrete surface of ceiling in CM 1:3 finished even and smooth without using extra cement cement complete all as specified and directed.

M & L preparing new plastered surfaces and applying three coats of white wash on ceiling all as specified and as directed

M & L preparing new plastered surfaces and applying two coats of cement base paint (Ist quality) on wall over a coat of alkali based primer all as specified and as directed

M&L for preparation of new plaster surface and applying two coat of weather proof exterior emulsion paint (Weather coat smooth) over a coat of priming (Seal-o-Prime) complete all as specified and directed.

M&L preparation of newly plastered surface wall and applying two coats of distemper oil emulsion of any tint over a coat of primer complete all as specified and directed.

M&L preparation of old decorated surfaces of walls, pillars and cornices, including brooming down and cleaning the surfaces and applying one coat of white wash on ceiling surfaces complete all as specified & as directed.

M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying one coat of distemper (oil emulsion) (Ist quality) of approved tint complete all as specified & as directed.

M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying two coats of distemper of approved tint all as directed

M&L preparing old painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint (Ist quality) of approved tint complete all as specified & as directed.

M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint (Ist quality) of approved tint complete all as specified & as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & as directed.

Demolition of PCC in ground floors and pavings n exc 15 cm thickness( below ground level) complete all as specified & as directed.

M&L 75 mm thick plain cement concrete 1:2:4 type B-1 (Using 20 mm graded stone aggergates ) as in plinth protections finished even and fair with joints 10 mm wide and in full depth at corners and @ 3 m c/c filled with mastic mortar complete all as specified and directed..

M&L for non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M & L glazed coloured ceramic tiles 300x450x7 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed

M&L for light shade vitrified ceramic tiles 8-10mm thick (square / rectangular) area of each tile exc 0.42 sqm but n exc 1.00 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed.

M & L for light shade full body vitrified ceramic tiles 10mm thick (square / rectangular) area of each tile n exc 0.36 sqm in vertical surface such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified & directed.

M&L for non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M & L coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exc 0.11 Sqm but n exc 0.18 Sqm, in vertical surface as in skirting over & including 10 mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as approved and directed

M&L for taking out shutters of Aluminium door any desc from frame and refixing in position after repair including change of rubber neoprene packing, changing hinnges, beadings and other connected items complete all as specified and directed.

S&F in repairs 300mm long, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F 18 mm thick HDHMR (High density high moisture resistant) board, one side white laminate and other side decorative as in kitchen cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick of matching colour on exposed surfaces of board fixed with polymaster adhessive including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as directed

S & F 8 mm thick HDHMR (High density high moisture resistant) board, one side white laminate and other side un decorative as in back of kitchen cabinets complete all as specified and directed.

S & F auto close hinges, stainless steel of grade SS-304 , bright finish fixed complete all as specified and directed.

S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 for raising of height of drain, manhole / wall complete all as specified & as directed.

M&L brick work with old size with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & as directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern low level 10 ltr capacity white, with intel, ball valve, float and handle including brakects, flushing pipe complete all as specified & as directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified & as directed.

S&F in repairs Vitreous China wash basin, white, counter type, size 520mmx 520mm x110 mm including brackets, coupling, and waste pipe etc complete all as specified & as directed.

S&F in repairs 15mm bore pillar tap, long body cast copper alloy, chromium plated, fancy type with capstan head, screwed down, high pressure with or without lettered 'Hot' or ' Cold' with long screwed shank and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. complete all as specified and directed.

S&F in repair vitreous china Squatting pan 'Orissa' pattern water closet white size 580mm x 440 mm with integral foot rest (excludinfg flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphone pipe etc complete all as specified & as directed.

S&F in repair vitreous China urinals, bowl type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified & as directed.

S&F in repairs, PVC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for Anglo Indian WC/ English WC as in repairs complete all as specified and as directed.

S&F in repair 15mm bore stop valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch as butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including haunching to pipe complete all as specified & as directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including haunching to pipe complete all as specified & as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable size clamps complete all as specified & as directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified & as directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified & as directed.

S&F 110mm bore PVC (SWR) vent cowl equal or unequal complete all as specified and as directed.

Taking down eaves gutters,sanitry PVC pipes and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

M&L for concrete bed to drain pipe incl. packing under and hanching against the side of pipes, 100 mm bore, in cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) after laying and testing of pipe complete all as specified and directed.

S&F in repair 110mm diameter PVC (SWR) floor trap outlet dia 75 mm, plain with stainless steel grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl taking down old tank complete all as specified in SSR Part I and directed by Engr-in-charge.

S&F in repair 2000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl taking down old tank complete all as specified in SSR Part I and directed by Engr-in-charge.

M&L preparation of old concrete/ brick/ stone Surfaces of any description over 10cm girth or width, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and as directed by eng in charge

M&L for disconnecting existing tanks having capacity exc500 & nexc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. Note : Cleaning repairing, etc. measured separately

M&L for cleaning and removing all scale and dirt, etc, from tanks having capacity exc500 & n exc 1000 ltrs and from mouths of circulating pipes etc. complete all as specified and directed.

Taking down existing roof treatment complete including demolition of PCC, Mud phuskas, lime concrete etc any description upto mother slab, and properly cleaning the surface to remove loose particles with wire brushes and removing the debris out side of MoD land complete all as specified and as directed by Eng- In-Charge.

M&L screed plaster 15mm thick in cement mortar (1:6) on concrete surfaces of roof to receive water proofing treatment and finished the surface even and smooth without using extra cement etc incl mixing of WPC as per manufacturers instruction complete all as specified and directed. Note:- Integral water proofing compound paid seperately as supply only

M&L applying a coat of bituminious primer confirming to IS-3384 @ 0.40 Kg per Sqm, APP BASED POLYMERIC Memberane not less than 3 mm thick, weighing not less than 3 Kg/m2, reinforcd with polyster non woven febric(weighing not less than 15 Gm/Sqm) and upperside of memberane thermally insulated uniformly embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75 mm and end slab shall be 100 mm and all over laps and joints shall also be sealed by torch application all as directed. Note:- The work should be executed by Authorised applicator of the company.

M&L preparing new surfaces APP based polymeric membrane roof top exc 10cm width or girth and applying two coats of aluminium paint complete all as specified and as directed.

M&L for padding in PCC 1:2:4 type B-0 (using 12.5mm size graded stone aggregates) laid to average consolidated thickness of 40mm to provide a finished slope of 1:30 finished even and smoth without using extra cement complete all as specified and as directed.

Supply only integral waterproofing compound ISI marked complete all as specified and as directed.

Dismentling of Asbestos cement (corrugated, semicorrugated, etc.), Polycarbonate sheet, boards in roof coverings complete all as specified and directed.

S&F pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers complete all as specified and directed.

Dismantling of wall and ceiling board (fibre pulp, insulation etc) or insulation board/ slab/blankets any thicknesss including cover filletes complete all as specified and directed

M & L for 12mm thick perforated particle board/ tiles for insulation and accoustic purposes of any size fixed with nails to timber frame work or with staples on snap grid on ceiling flat or sloping (As per sample held with AGE B/R-I Sub Divn) and applying two coat of oil bound distemper of any tint including priming the surfaces complete all as specified and directed

,--ditto--- all as per item No 110 above but except sheet / tile complete all as specified and directed.

M & L for 12mm thick perforated particle board/ tiles for insulation and accoustic purposes of any size fixed with nails to timber frame work or with staples on snap grid on walls flat or sloping (As per sample held with AGE B/R-I Sub Divn) and applying two coat of oil bound distemper of any tint including priming the surfaces complete all as specified and directed

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and directed.

S & F in repair PVC Vanishing blinds of any size and any type (Horizontal/ vertical/roller/Zebra type) Blinds complete all as specified and directed by Engr-in-Charge

M&L in repair for wooden floor at Squash Court as follows complete all as specified and directed by Engineer -In-Charge:- Wooden floor - Prestige USA - (WSF Approved) Maple wood - for flooring of squash courts the following work only :- (1) Flooring - Maple, 20 x 57/83 mm, Tongue & Groove, kiln dried and treated for termites. (2) The maple flooring will be finished with anti skid polyurethane finish.

M&L for complete removal of existing treatment of wall by mechanical means, preparing surfaces and applying two coats of exterior acrylic emulsion paint (1st quality) in plain patternover and incl a coat of alkali resistant priming paint complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from metal/aluminum frame including punching or drilling out old glazing pin/spring/ clip complete all as specified and directed.

M&L securing glass of any description in existing wooden/aluminum frame glazed with putty / beads including removing loose or decayed putty / beads, rebeading /reputting and painting to match existing work complete all as specified and directed.

S&F 12mm thick froasted glass for urinal partition of size exc 0.5 sqm fixing with suitable size SS clamps complete all as specified and directed.

M&L taking down existing 12 mm thick toughned glass door/ partition etc and refixing the same after replacing hinges and minor repair including all type carving lining work required to fix the toughened glass etc complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed.

Dismatling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar complete all as specified & directed.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stones slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

M&L Machine pressed precast concrete rubber moulded coloured interlocking paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M-35 Grade in floors/path/parking laid over and including 25 mm thick sand cushioning complete all as specified and as directed. Note : Sand cushion shall not be measured and paid seperately

,---ditto--- all as per srl item No 125 above but Except tiles complete all as specified and as directed.

M & L machine cut kota stone slab flooring 20-25mm thick, size of kota stone 400x400 mm laid over and including cement screed base 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L machine cut kota stone slab 20-25mm thick on vertical surface of wall, riser, steps, skirting, dado and pillar etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick cement plaster in CM 1:4 complete all as specified and directed

S&F in repair pressed steel factory made cub board shutter with frame of 1.25 mm thick and shutter 1 mm thic PBI sheet with 6 Nos 3.15 mm thick and 100 mm long steel hinges godrej pattern locking arrangement, handles incl 12 mm dia vertical rod incl spray painting in factory in wood finish pattern or equivalent complete all as specified and directed.

S&F in repair electronic flushing system kits of make cera / RAK complete incl sensor, replacement of sonat valve, battery box with 4 No1.5 Volt AA Duracell for integrated urinal pot complete all as specified and directed. Note : The replacement and repair of sensor will be done through authorised dealor/agent of of the company.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

Rohan Construction Company (BID ID -3125731)

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3132061)

S.R.Enterprises (BID ID -3132801)

J.J.ENGINEERING (BID ID -3132411)

ANKIT BUILDERS (BID ID -3132040)