ADDTN ALTN TO CERTAIN OMQs AND P-176 AND CERTAIN MW AND MR WORKS AT HQTC

Amount

COMMON ITEMS APPLICABLE FOR JOB 'A', 'JOB 'B' , JOB 'C' & JOB 'D' (B/R & E/M) :-

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with grey cement & pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including a 15 mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer ect. complete using ERW or indluding butt welded tubes conforming to I.S.1161-1998 grade St-240 complete all as specified and directed.

M&L for two coats of synthetic enamel paints over a coats of red oxide zine chrome primer including prepration of new/previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd and specified and directed.

S&F Gl frame Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for preparation of untreated old wooden surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint (1st grade quality) complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles complete all as specified and directed. .

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 ( 20 mm graded aggregate) exc. 10 cm in width and setting in mortar 1: 6 , complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, (600x600 mm) area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 complete all as specified and directed.

All as per item No:16.00 here-in-before but as in skirting over and including 10mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 complete all as specified and directed.

M&L for non skid Ceramic tiles coloured 7 to 8mm thick (square/ rectangular) polished,(400x400 mm) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm each, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed of CM 1:6 complete all as specified and directed.

M&L for 20mm thick Granite (Jet black) of any type work (table rubbed and polished) in cooking plateform, widow sill and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade granite incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Removing old dumped junk/ building materials/ debris/ tree roots, trunk, & branches of any size etc. to a distance of 30Km or beyond, out of premises of metropolitan area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination complete all as specified and directed.

Dismantling water tanks, capacity in litres exc 500 & n exc 1000 complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, capacity in litres 1000 (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F Modular switch , 1 Module single pole one way 10 Amps complete all as specified & directed.

S&F Modular socket , 2 Module 6 Amps, 5 pin, 230 volts AC complete all as specified & directed.

S&F Modular switch , 1 Module single pole one way 16 Amps complete all as specified & directed.

S&F Modular socket , 2 Module 6/16 Amps, 6 pin, 230 volts AC complete all as specified & directed.

S&F Modular type fan regulator upto 120 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm complete all as specified & directed.

S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals 230 volt complete all as specified & directed.

S&F Modular white cover plate with frame, 3 module complete all as specified and directed.

S&F Modular white cover plate with frame, 6 module complete all as specified and directed.

S&FModular white cover plate with frame, 8 module complete all as specified and directed.

S&F Modular metal flush box 3 module complete all as specified and directed.

S&F Modular metal flush box 6 module complete all as specified and directed.

S&F Modular metal flush box 8 module complete all as specified and directed.

S&F LED lights fitting 4 feet 20 watt , 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

M&L for sub main wiring with two single core 4.00 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Conduit 25mm dia ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 4.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified and directed. Note-Two runs of 4.00 sqmm single core cable and one run of 4.00 sqmm earth wire including PVC Conduit 25mm dia together will be measured as one unit.

M&L Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead up to test point with suitable size GI nuts/bolts, washers,check nut and brazed properly up to main board,LT panel etc and adequate quantity of charcoal and salt 15 cm around the earth plate including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with 8mm dia TMT bars 3 Nos both way including CI cover 10 mm thick with hinged and frame of angle iron 25x25x6mm with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GI protection pipe 15 mm bore up to main board complete all as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete all as specified and directed. Note: (i) The unit rate includes 15 mm dia GI pipe up to 7.5m for protection of earth lead. (ii) The unit rate includes galvanised iron wire 4 mm dia from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance of each earthing is recorded more than 3 ohms then the earthing shall be re done by the contractor without any extra cost to the department.

S&F Sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt, complete all as specified & directed.

S&F MCB SPN, 40 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified & directed.

S&F MCB SP, 6-32 Amps, 230V, C- series with breaking capacity of 10KA complete all as specified & directed.

Excavation in trenches not. exc. 1.5m wide and not exc. 1.5 deep and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in,including spreading, levelling ,watering and well ramming in layers not exc 25cm thick in soft/loose soil complete all as specified and directed.

Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M&L Sand cushioning to under ground cable with locally available dry sand for protection of cable 8cm thick before laying of cable and 15 cm thick after laying and stretching the cable below the bricks/PCC cover ,punning of sand using suitable T&P as per site requirement complete all as specified and directed Note- Punned thickness of sand to be consider for measurement purpose.

Supplying and laying un-reinforced precast concrets cable cover class LV, Type 1, flat, size 250x150x40 mm complete all as specified and directed.

M& L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4mpa working pressure complete all as specified & directed.

ITEMS APPLICABLE FOR JOB 'A' (B/R & E/M) :-

M&L cement concrete 1:2:4, type B1(20mm graded stone aggregate) as in coping, kerb etc including necessary form work complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc complete all as specified and directed.

M&L for 100mm thick Cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

S&F in repair 1.25mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified & directed.

M&L Preparation of old painted surface of any description not otherwise described steel and iron surface over 10 cm width or girth and applying one coat of synthetic eanmel paint of any colour complete all as specified and directed.

S&F in repairs 5mm thick ordinary quality colorless cast acrylic sheet with light transmittance of 92% including fixing with necessary screws, and aluminium beading on iron fram work surface etc as required complete all as specified & directed.

Fixing in Repair for old pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts complete all as specified and directed.

Dismantling for Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L Seamless calcium silicate ceiling made out of 1800 x 1200 mm 12mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

M&L Preparation for two coats of distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of old surface complete all as specified and directed.

M&L Preparation of new surface of false ceiling by applying 1mm thick plaster of paris putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

M&L Preparation of old surface of false ceiling by applying 1mm thick plaster of paris putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

M&L for preparation of old decorated plastered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white washing on ceiling complete all as specified & directed.

M&L for one coat of exterior emulsion paint (weather coat ) over a coat of approved primer including preparation of old surfaces complete all as specified & directed.

M&L for providing precast cement concrete louvres and jallies, type B0 1:2:4 (12.5mm) graded aggregate) 50 mm thick (measured solid) including all mouldings but not excluding frame set in cement mortar 1:4 including dismantling existing louvres and jallies complete all as specified & directed.

M&L for two coats of exterior emulsion paint (weather coat ) over a coat of approved primer including preparation of new surfaces complete all as specified & directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement complete all as specified & directed.

M&L for Non skid Ceramic tiles coloured 7 to 8mm thick (square/ rectangular) polished,(400x400 mm) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm each, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in wall skirting over and including 10mm thick rendering of CM 1:4 complete all as specified & directed.

M&L for glazed ceramic coloured/digital tiles in vertical surface 350x250mm x 7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick bedding layer of cement mortar 1:4 complete all as specified & directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick of size 300mm x 300mm in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match complete all as specified & directed.

M&L for machine cut cudappah stone slab 20-25mm thick over and including 15mm thick screed bed of CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L for flush pointing to random rubble masonry, uncoursed or brought upto courses in CM 1:4 complete all as specified & directed.

M&L for 100mm thick Cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc complete all as specified and directed.

S&F in repairs 15mm Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.

S&F in repairs 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "Hot" or "Cold" with long screwed shank and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed.

S&F in repairs concealed/angle stop valve 15mm bore, fancy type chromium plated with long shank and cup screwed down, high pressure with crutch or butterfly handle, for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & directed.

S&F 5mm thick mirror of size 450mm x 600mm mounted on 6mm thick commercial ply wood backing and screwed with PVC channel complete all as specified & directed.

S&F in repairs stainless steel Soap dish, any type of size approximate size 160 x 60 x 90mm, fixed to plugs with chromium plated brass screws complete all as specified & directed.

S&F in repairs Brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified & directed.

S&F in repairs Brass chromium plated shower rose 125mm size with 300mm long stainless steel arms complete all as specified & directed.

S&F in repairs ceramic wash basin of size 550x460mm, white or tinted, counter sunk, including waste coupling chromium plated etc. and fixed in granite or wooden cabinet including necessary adhesive or fittings complete all as specified & directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushingcistern and flush pipe) including provision of concrete bedding complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified & directed.

S&F ball valves 20mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified & directed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S&F GI tubes 15mm bore, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down old steel tubing complete all as specified & directed.

S&F GI tubes 20mm bore, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down old steel tubing complete all as specified & directed.

Cutting chases, pinning in stone concrete block or slab walls making good to facings where required and pointing in ement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified & directed.

S&F in repairs Galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & directed.

M&L Clay moulded terracota jalli blocks of intricate design, patterns and shapes , kiln burnt, Size of each block 220x220x63 mm, binded using approved adhesive, fixed to Mild steel frame work as required and colouring the tiles wits terracota shade for aesthetic appearance complete all as specified & directed. Note:- Mildsteel work shall be measured and paid separately.

Taking down carefully copper/aluminium point wiring (light, fan,socket or power) complete, including fittings & fixtures such as switches, sockets,ceiling rose, pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good to disturbed surfaces with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed.

Taking down carefully ceiling fan from ceiling, painting of ceiling fans complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and refixing of ceiling fan in same position in serviceable condition including provision of three core 1.5 sq mm cable from ceiling rose to fan connector complete all as specified & directed.

M&L for point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Conduit 25mm dia ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing on stone walls / brick masonary walls /ceilings /floors/pillar etc heavy duty plastic terminal boxes for mounting of modular switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge for the following :-

One light point controlled by one single pole 5 Amps switch.

One ceiling fan point controlled by one single pole 5 Amps switch.

One 5 pin socket point 5 Amps on independent board.

One 5 pin socket point 5 Amps on same board with other switches.

All as per item No-94.00 here-in-before but for power point wiring with 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 15 Amp switch socket outlet on independent board complete all as specified & directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F Highbay luminaire with PDC Housing, round shaped LED highbay luminaire with PC Diffuser & 120 Im/W efficiency.Equipped with 4 kV in-built and 10 kV external surge protection,IP 66 protection rating complete all as specified & directed. Make Bajaj cat Part no-OPTIBAY 100W WH NB PC SD or techno commercially equivalent in Havells, CG.

M&L for sub main wiring with two single core 2.5 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Conduit 25mm dia ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified & directed by Engineer-in-Charge. Note-Two runs of 2.5 sqmm single core cable and one run of 2.5 sqmm earth wire including PVC Conduit 25mm dia together will be measured as one unit.

M&L for sub main wiring with two single core 6.00 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Conduit 25mm dia ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / rawl plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 6.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified & directed by Engineer-in-Charge. Note-Two run of 6.00 sqmm single core cable and one run 6.00 sqmm earth wire including PVC Conduit 25mm dia together will be measured as one unit.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing 4 mm dia galvanised iron or steel wire complete all as specified & directed.

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 70 sqmm 3.5 core and connecting up incoming/out going cables connection with suitable size lugs and testing complete all as specified & directed.

ITEMS APPLICABLE FOR JOB 'B' (B/R & E/M) :-

M&L for glazed ceramic coloured/ digital/ stone finish wall tiles in vertical surface 600x300x7 to 8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 complete all as specified and as directed

M&L for 25 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) as in flooring complete all as specified & directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons incl granite slab in kitchen platform Laid, bedded and pointed in any mortar etc complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) wooden not exceeding 1.5 Sqm each. complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) wooden exceeding 1.5 Sqm not exceeding 4 Sqm each complete all as specified & directed.

S&F 100mm long stainless steel Butt hinges complete all as specified & directed.

S&F for 125mm stainless steel barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F 125mm stainless steel handles complete all as specified & directed.

S&F in repairs 150mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified & directed.

S&F second class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified & directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed.

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.

S&F powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified & directed.

S&F in repairs powder coated anodised aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified & directed.

S&F in repairs sheet glass, of 4.8mm thick ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified & directed.

S&F 18/19mm Prelaminated medium density fibre particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified & directed.

S&F Internal auto closing concealed hinge, of make Kutchina'/Hettich/Hafele complete all as specified & directed.

S&F 6" premium quality crome finish Handle, of make "Kutchina"/Hettich/Hafele make complete all as specified & directed.

S&F good quality Telescopic channel set for drawer of make "Kutchina"/Hettich/Hafele multi-tech high capacity 500 mm long complete all as specified & directed.

S&F 19-20mm wide and 0.80mm thick decorative type PVC beading complete all as specified and directed.

S&F in repairs premium quality 15mm bib tap with wall flange chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.

S&F in repair CP soap Dish complete all as specified & directed. Make-Jaguar Code No- CAN-1137/AKP-35731P or techno commercially equivalent in Somany, Cera ,Prayag, Parryware

S&F in repair Toilet paper roll holder with flap complete all as specified & directed. Make-Jaguar Code No- AKP-35753P or techno commercially equivalent in Somany, Cera ,Prayag, Parryware

S&F in repairs single lever basin mixture with popup waste system with 450 mm long braided hoses complete all as specified & directed. Make: Jaquar-LYR-38051B/ORP-10011BPM or techno commercially equivalent in Somany, Cera ,Prayag, Parryware.

S&F in repairs table top basin of size 565X425X140mm of white colour complete all as specified and directed. Make-Jaquar Cat No-KUS-WHT 35935/ JDS-WHT-0547 or techno commercially equivalent in Somany, Cera ,Prayag, Parryware.

S&F in repairs premium quality 15mm bore wall mixer with hand shower system with provision for overhead shower complete with 115mm long bend pipe, connecting Legs & wall Flange complete all as specified and directed.

S&F in repairs 15mm bore hand shower (Health Faucet) with 8 mm Dia, 1 Meter Long flexible tube & wall hook of make: Jaguar Cat No- ALD -573/ALD 577 or techno commercially equivalent in Somany, Cera ,Prayag, Parryware complete all as specified and directed.

S&F in repair Towel rail of 600 mm long complete all as specified and directed. Make-Jaguar Cat no-AHS-1507 or techno commercially equivalent in Somany, Cera ,Prayag, Parryware.

S&F in repair glass shelf of 600 mm long with cp bracket complete all as specified and directed. Make-Jaguar Cat no-CAN-1171N or techno commercially equivalent in Somany, Cera ,Prayag, Parryware.

S&F Rimless Single Piece-WC with UF slim seat cover, hinges fixing accessories and accessories Set,Cistern fitting,size 380mmx670mmx765mm with hydraulic sheet cover and connecting to 'S' trap 300 mm incl taking down old complete all as specified and directed. Make Jaguar FSS-WHT-29853S300UFSM / OPS-WHT-0205 or techno commercially equivalent in Somany, Cera ,Prayag, Parryware.

S&F in repairs CP connection 15mm dia and 450mm long with two Nos of brass checknuts and washers complete all as specified and directed. Make Jaguar cat no-ALD-805B or techno commercially equivalent in Somany, Cera ,Prayag, Parryware.

S&F Stainless steel Gratings size 125 mm dia complete all as specified & directed.

S&F Towel rack without lower hanger of 600 mm long and 03 no hooks complete all as specified & directed. Make-Jaguar Code No- AHS-1581 or techno commercially equivalent in Somany, Cera ,Prayag, Parryware.

S&F Towel ring square with round flange complete all as specified & directed. Make-Jaguar Code No-ACN-CHR-7721 or techno commercially equivalent in Somany, Cera ,Prayag, Parryware.

S&F in repair angle stop cock with wall flange 15 mm dia chromium plated, screwed down, high pressure, screwed both ends for 15mm bore iron pipes or for unions complete all as specified & directed. Make-Jaguar Cat no-CON 059KN or techno commercially equivalent in Somany, Cera ,Prayag, Parryware.

S&F in repairs fancy type CP 2 way bib cock with wall flanges complete all as specified & directed.

Taking up or down 15mm bore water tubing and connection building , or cleaning for refixing all as specified and as directed.

Taking up or down 20 mm bore water tubing and connection building , or cleaning for refixing all as specified and as directed.

Taking up or down 25 mm bore water tubing and connection building , or cleaning for refixing all as specified and as directed.

S&F UPVC 15 mm dia pipe pressure rating 10 Kgf/cm2 with all fittings and fixed to wall /laid in floor complete all as specified and as directed.

S&F UPVC 20 mm dia pipe pressure rating 10 Kgf/cm2 with all fittings and fixed to wall /laid in floor complete all as specified and as directed.

S&F UPVC 25 mm dia pipe pressure rating 10 Kgf/cm2 with all fittings and fixed to wall /laid in floor complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed with floor including necessary fixing cleats/ clamps, complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including necessary fixing cleats/ clamps, complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps complete all as specified and directed.

S&F in repairs PVC bends of 110 mm dia complete all as specified and directed.

S&F in repairs PVC bends of 75 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) branch piece, of 110 mm dia single (single Y) equal or unequal complete all as specified & directed.

S&F ball valves 25mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified & directed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25mm dia and fixed complete all as specified & directed.

S&F 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) including cost of two or more coats to give an even shade of plastic paint on ceiling with putty work complete with designer ceiling (with part ply,laminate and cove) complete all as specified & directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified & directed.

S&F Rendering 5mm thick cement plaster in cement morter 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement complete all as specified & directed.

M&L for preparation of old decorated surface on ceiling including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion through mechnical means complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6, finished even and smooth with out using extra cement complete all as specified & directed.

M&L Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified & directed.

M&L for two coats of Distempering on wall with distemper oil emulsion white or tinted over primer over a coat of 3 mm thick wall care putty, including preparation of new surface complete all as specified & directed.

M&L for two coats of Distempering wall with distemper oil emulsion white or tinted through mechnical means. over a coat of 1mm thick wall care putty, including preparation of old surface after complete removal of existing treatment complete all as specified & directed.

M&L for complete removal of existing treatment of walls and applying two coats of exterior emulsion paint (weather coat) through mechnical means over a coat of approved primer complete all as specified & directed.

M&L Machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade and pointed with grey cement mixed with pigment to match complete all as specified & directed.

M&L for 50mm thick Cement concrete type B1, 1:2:4 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc complete all as specified & directed.

M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed.

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified & directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil complete all as specified & directed.

M&L for plain cement concrete (1:3:6), type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified & directed.

S&F Mild steel screw bolts, diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long complete all as specified & directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified & directed.

S&F Factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 65 mm Single Rebated ,made from wpc material comparising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia incl fittings like auto hinges/ telescopic channel and any other fittings length,colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.

M&L for concealed point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing on stone walls / brick masonary walls surface /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly for mounting of modular switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed by Engineer-in-Charge for the following :- Note- Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit and sunken boxes included in quoted rate. No extra payment will be made for this.

One light point controlled by one single pole 5 Amps switch.

One ceiling fan point controlled by one single pole 5 Amps switch.

One exhaust fan point controlled by one single pole 5 Amps switch.

One 5 pin socket point 5 Amps on independent board.

One 5 pin socket point 5 Amps on same board with other switches.

One bell/buzzer point controlled by one push button 5 Amps switch on independent board.

M&L for concealed point wiring with 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing on stone walls / brick masonary walls surface /ceilings /floors etc anodized modular MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly for mounting of modular switches/ sockets/regulator etc and 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc for One 15 Amp switch socket combination on independent board complete all as specified & directed by Engineer-in-Charge. Note- Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit and sunken boxes included in quoted rate. No extra payment will be made for this.

S&F Modular type Bell push 6 A, 1 Module complete all as specified & directed.

S&F Ding Dong Bell, AC, 230 volts, Single Pole complete all as specified & directed.

S&F Modular white cover plate with frame, 1 module complete all as specified & directed.

S&F Modular white cover plate with frame, 4module complete all as specified & directed.

S&F Modular metal flush box 1/2 module complete all as specified & directed.

S&F Modular metal flush box 4module complete all as specified & directed.

S&F LED fitting of size 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified & directed.

S&F LED fitting square shaped of size 300x300 mm,12 watts, 220 V, AC surface/recessed type with high efficency PMMA difuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F Exhaust fan PVC body AC single phase 230 V of size 380 mm sweep, 900 RPM with blades, and frame and louvers complete all as specified & directed.

Supply and fixing Wall Mounted fan AC single phase 230 Volt of size 400 mm sweep in stone/ brick masonary or any type wall with four inch screws, gatti / PVC roul plugs all as per site requirement including making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor complete all as specified & directed . Make :Havells Cat Part No FHWSUSTWHT16 or techno commercially Equivalent in CROMPTON/ ANCHOR/ BAJAJ/ KHAITAN

S&F Flexible LED strip light of yellow colour with IP 65 of capacity 20 watt including driver, adaptor and all accessories as per site requirement complete all as specified & directed.

M&L for concealed sub main wiring with two single core 4.00 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 4.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed. Note- (i) Two runs of single core 4 sqmm cable and one run of 4 sqmm earth wire including PVC concealed Conduit together will be measured as one unit.(ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this.

M&L for concealed sub main wiring with two single core 6.00 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC rigid concealed conduit medium grade of size not less than 25 mm dia ISI marked with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing inside stone walls / brick masonary walls /ceilings /floors etc with 6.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc complete all as specified & directed. Note- (i) Two run sof single core 6sqmm cable and one run of 6 sqmm earth wire including PVC concealed Conduit together will be measured as one unit.(ii) Cutting, Chasing,drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this.

ITEMS APPLICABLE FOR JOB 'C':-

S&F 5 feet pulley operated clothes drying system consisting of Each anodized aluminium pipes(4 Nos), each of outer dia 22mm and inner dia 19.8 mm pulley made up of derlin with rope guide mounted on channel pair of length 24inches (distance between two pipes is adjustable) with locking system to hide rope knot channel tobe mounted or fixed with self tapping screws provided and rope will be of polyster braided undyed of min 4mm dia complete all as specified and directed.

M&L Preparing new plastered surface on ceiling and applying three coats of white wash complete all as specified and directed.

ITEMS APPLICABLE FOR JOB 'D':-

M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in benching,coping including weathering slightly rounded or chamfered angles or as per site requirement with necessary plastering work complete all as specified and directed.

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 16 sqmm 4 core connecting with panel,DB , pole box with suitable size lugs complete all as specified and directed.

All as per item No-193.00 here-in-before but of size 50 sqmm 3.5core.

M&L 50 mm dia GI tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, including Flat Iron clamps=02 Nos of size 50x6mm, with nut bolt and washers complete all as specified & directed.

Fixing only LED bollard light fitting with PCC block 1:2:4 type B1 (using 20mm graded crushed stone aggregate) of size 90X30X30 cm and 45 cm above and 45 cm below the ground with plaster and cement based paint including nut,bolt and washer or as per site requirement and connection with 16 sqmm 4core cable including PVC cable loop box, size not less than 200 mm x 140 mm x 95 mm, out door type, IP 65 including 4 Nos aluminum bus bar of size 25mmx5mm mounted on porcelain insulators with one MCB SP 6 amps 230 volts including nuts,bolts, washers,aluminium lugs and 01 No modular weather proof with cover IP 66 15 Amp switch socket combination complete all as specified & directed.

S&F Sheet metal enclosure for DB's double door TPN 04 ways including MCCB 125 Amp to be used as incomer and outgoing as MCB single pole, deep drawn with 200 Amps rated copper bus bar 415 V, complete all as specified & directed.

S&F Sheet metal enclosure for DB's double door SPN, 12 ways when MCBs to be used single pole and neutral, deep drawn with 200 Amps rated copper bus bar 230 Volt, complete all as specified & directed.

Supply and Install on load Changeover switch 415 Volt in sheet steel enclosure 4 pole of capacity 200 Amp including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified & directed.

SRI GANESH ENTERPRISES (BID ID -3381648)

EURO ENTERPRISES (BID ID -3383230)

raashi constructions (BID ID -3390597)

chowdeshwariconstructionco (BID ID -3381535)