SPL REPAIR TO BLDG NO P-05 OF 414 ASC BN MKTG (TA) AT KAMPTEE, PROVN OF BATHROOM AND TOILET BLOCK NEAR BLDG NO P-24 AT CERTAIN UNIT AT KAMPTEE, SPECIAL REPAIR TO LADIES TOILET AT BLDG NO 45 A AND B, PROVN OF AIR CURTAINS AT NCC OTA UNDER GE KAMPTEE

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering complete all as specified and as directed.

M&L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of on colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw complete all as specified and as directed.

Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed.

point

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets,complete all as specified and directed.

M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 32mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed

S & F Solid PVC wall lining consisting of 5 mm thcik plain/wood grain printed colour PVC sheet inclusive cement and fixing at ste on PVC frame complete all as specified and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame complete all as specified and as directed.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame ) area n. exc 1.50 sqm complete all as specified and directed.

Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Butt hinges medium weight cold rolled stainless steel 100mm size complete all as specified and directed.

S&F 150 mm Mild steel sliding door bolts,plate type, stove enamelledblack, with bright bolt not lessthan 12mm dia with andincluding a minimum of 6 boltsand nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. Note: (i) Glass or wiremesh shall be paid separately (ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Each Job

S&F 4 mm thick glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.

S&F 4.8 mm thick glass, ordinary quality and glazing with oil putty/wooden beads in square exceeding 0.5 square metre in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

M&L for light shade Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area ofeach tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neatcement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:4 (including bodder tile) complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4. complete all as specified and as directed.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Rendering 15 mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and finished fair and even complete all specified and directed. Note:- WPC shall be measured and paid separately

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connection complete all as specified and as directed.

Supplying and laying of CPVC pipes 20 mm bore SDR 11 & Plain CPVC SDR 11 fittings in trenches and including taking up or down steel tubing and connection complete all as specified and as directed.

S&F in repairs seat and cover (white or colour as approved) for pedestal pan and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair Vitreous China wash basin, white,with padestal flat back, size 540x400mm excluding ditto but including brackets and padestal etc complete all as specified and as directed.

S&F in repairs stop valve/angle cock 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and as directed.

S&F in repairs 2-way bib cock with flange 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type, complete all as specified and as directed.

S&F in repair PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

S&F in repair PVC (SWR) Bends any radius for 110 mm bore complete all as specified and directed.

S&F 1000 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.

S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and as directed.

Excavation in trenches exc 1.5m in deepth and 3.00m in width and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n exc. 25cm in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in bed to drain pipe 150mm bore including packing under and hauching against the sides of pipe after they are laid and tested complete all as specified and directed.

m complete all as specified and as directed.

M&L for providing precast RCC cover slabs 1:2:4 type B1 (20 mm graded aggregate) set in cement mortar 1:4 as in (for drain, man holes,chajja, platform etc) and similar articles with plain faces and each cover slab covered in 6 Nos loop holes complete all as specified and directed

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete /sub base complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) Type C2 (using 40 mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement including mastic filling in the joint complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size conforming to is 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30 mm thick complete all as specified and as directed. Note :- Sand cushion will be measured and paid separately

M&L for sand filling under cushion of paver blocks complete all as specified and directed

M&L for providing cement concrete1:3:6 type C1 (20mm graded aggregate) as in copings,plinth courses including weathering,slightly rounded or chamfered angles and throating on edges complete all as specified and as directed.

M&L for Post Construction ATT along thew external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc in apron, etc complete all as specified and as directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole , 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floors, complete all as specified and as directed.

S&F in repair pillar cock swan neck 15 mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and as directed.

M&L for Post Construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 lite/hole by drilling 6 mm dia holes at a ownward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and as directed.

Earth work in any type of soil in excavation by mechanical means (Hydraulic excavator) means for fun (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 100 m and lift upto 1.5m, complete all as specified and as directed.

M&L for Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and as directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L Form work to side of columns and simillar work complete all as specified and as directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in columns and pillars etc complete all as specified and as directed.

M&L Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete all as specified and as directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and as directed.

M&L Form work to chullah hoods, chajjas, troughs and similar items including edges and simillar work complete all as specified and as directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in chajja etc complete all as specified and as directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Formwork to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F milt steel TMT bars 8 mm dia in spacers, cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

S&F mild steel TMT bars 8 to 10 mm dia a as in stirrups, spacers and binders complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth withot using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick on surfaces of ceiling in cement mortar (1:3) and surfaces finished fair and even complete all as specified and as directed

M&L for prepartion of new plastered surface and applying two coats of oil bound distemper over a coat of Primer over two coats of putty complete all as specified and directed.

M&L for prepartion of new plastered surface, nails etc of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L Preparation of new plaster surfaces apply two coat of cement base paint over a coat of primer compete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering compete all as specified and as directed.

M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path compete all as specified and as directed.

M&L for 75 mm thick Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed.

M&L for providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg), as in sub base in floor/paving etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles 300x450x6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

M&L for for PCC 1:2:4 type B1 (using 20mm graded stone aggregate as in cills, steps, parapets and copings, kneelers, bed plates, hold fasts block, filling on pressed steel door frame etc complete all as specified and as directed

S&F Extruded Aluminium alloy handles, fabricated type anodised of 125mm long complete all as specifed and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long complete all as specifed and directed.

Aluminium alloy, anodised, 250mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifed and directed.

S&F in repair health faucet of 15 mm bore brass cromium plated including PVC pipe to connection GI tubing 15 mm bore all complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and directed

M&L for 4.0 mm thick frosted sheet glass ordinary quality and glazing w

ith oil putty in square n.exceeding 0.5 Sqm in each panes complete all as specifed and directed.

S &F Towel Rail 20mm dia of Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats compete all as specified and as directed.

Flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specifed and directed.

M&L for machine cut cudappah stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut compete all as specified and as directed.

S&F Wash Basin oval type (56x41cm) compete all as specified and as directed.

S&F pre-polished granite 20mm thick fixed on platform/shelves over 20mm thick screed bed in cement mortar 1:6, compete all as specified and as directed.

S&F in wall mixer, 3 in 1 system (Provn for OH shower and hand shower) compete all as specified and as directed.

S&F in CP bib cock two way double handle with flange 15 mm dia screwd for iron pipe or for brass ferrule and fixed compete all as specified and as directed.

Supply and fix in pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, fancy type screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in soap dish, CP 125mm size fixed to plugs with chromium plated brass screws compete all as specified and as directed.

S&F in chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15 mm bore of pipe compete all as specified and as directed.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia compete all as specified and as directed.

S&F CP grating of size 100mm dia compete all as specified and as directed.

M&L 15mm GI tubing 'Medium grade' with all fiting and fixed complete tom wall and celing or laid in floor of fllowing sizes compete all as specified and as directed.

M&L 20mm GI tubing 'Medium grade' with all fiting and fixed complete tom wall and celing or laid in floor of fllowing sizes compete all as specified and as directed.

S&F PVC cowl slotted vent cowl 110 mm size compete all as specified and as directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyester film reinforcement with 3 mm thick and weight not less than 3.00 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with and including WPC and two coat of aluminum paint of 0.2 Kg/Sqm (each coat) over membrane complete all as specified and directed. Note:- Work to be executed through authorized applicator only.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base etc compete all as specified and as directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade etc compete all as specified and as directed.

M&L Cement concrete 1:2:4 type B1 using 20mm graded stone aggragate as in surface channels and drains compete all as specified and as directed.

M&L for Providing precast RCC ( 1:2:4 ) type B1 (using 20 mm gradded stone aggregate ) as in landings,cover slabs shelves and set in CM 1:4 etc.including all necessary formwork compete all as specified and as directed.

M&L for laying 150 mm dia RCC NP 2 drain pipes compete all as specified and as directed.

M&L for 1:3:6 type C-2 concrete bed to drain pipe including packing under and haunching against the side of pipe after they are laid and tested of 200mm bore compete all as specified and as directed.

S&F 4 mm thick Figured glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane compete all as specified and as directed.

S&F in repair jet spray (butterfly) with 1.5 mtrs tube with complete all accessories complete all as specified and as directed.

S&F powder coating aluminium window / ventilator shutters, sliding type, slides of two/three/four track without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately

S&F 5.5 mm thick glass, ordinary quality and glazing with oil putty/wooden beads in square exceeding 0.5 square metre in each pane complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified

Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection andcomplete all as specified

Dismantling boarding, any description, fixed in any position with Screw, complete all as specified and directed.

Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes, complete all as specified and directed.

Taking down sheet metal enclosure, DB & MCBs main switch etc and making good distrubed sufaces to match with exisiting surfaces, complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces, complete all as specified and directed.

S&F in repair 12 mm thick Alstone wood Polymer Composive Board ( WPC) in cupboard shutter and like with decorative on both side design fixed by drilling screws and brackets all as specified all as directed.

S&F toughned glass 12 mm thick as in hinged doors, partiotion automatic doors and similar work incl cutting to shape ,drilling holes and lock reqd complete all as specified and directed.

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&F for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and as directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item Sl No 180.00 above but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and as directed.

All as per item Sl No 180.00 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and as directed.

All as per item Sl No 180.00 above but One 3 pin 5 amps socket out let point on independent board, complete all as specified and as directed.

All as per item Sl No 180.00 above but One bell/buzzer point controlled by one bell push, complete all as specified and as directed.

All as per item Sl No 180.00 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for

15 amps power point, complete all as specified and as directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm, complete all as specified and as directed. Note:- PVC Conduit. for one run of 3 x 4.0 sqmm and conduit will be measured as one unit.

Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and as directed.

Supply and fixing for socket modular type single pole one way 6 amp 2 module 3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and as directed.

Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and as directed.

Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and as directed.

Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and as directed.

Supply and fixing Electric Bell Ding dong AC 230 volts, single phase, complete all as specified and as directed.

Supply and fixing bell push switch modular type single pole one way 5 amp 240 volts, complete all as specified and as directed.

Supply and fixing 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 120 watts single pole complete all as specified and as directed.

Supplying and fixing 20 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 220 to 240 V , 50 Hz, CCT 6500K, THD<10% connecting with 3 core 1 sqmm copper conductor cable complete all as specified and as directed.

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and as directed.

Supply and fixing LED light fitting 10W bulk head luminaries made of diecast alumnium housing with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 220 to 240V, 50Hz, THD<10%, lumen 100 lm /watt, 6500 K complete all as specified and as directed.

Supply and fix building security light LED 25 W with Lumen O/P 2500 with driver with rated voltage 220 to 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and as directed.

Supply and fix Energy efficient surface mounted 2'X2' grid Ceiling LED fitting 36/40 W rated voltage 240 V, 50Hz combination with profiled and flat diffuse, 6500K, THD<10%, lumen 100 lm/W, CRI>80, PF>0.90 complete all as specified and as directed.

Supply and fixing ceiling fans complete with min 3 blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep & min 285 RPM. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), THD<10%, Max temp rise 75° C complete all as specified and as directed.

Supply and fixing Exhaust fan PVC body 250 mm sweep, 1200 RPM single phase, 230 Volts, 50Hz, 5 blades with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes in window frame of suitable size complete all as specified and as directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 12 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and as directed.

Supply and fix MCB single pole & neutral 240 volt 32 amps 10 KA, "C" curve complete all as specified and as directed.

Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA, "B" curve complete all as specified and as directed.

S&F Rigid non-metallic PVC conduit 25 mm medium grade concealed in the wall for telephone /computor cable exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair for curtain rails, mild steel, chromium plated with fixing brackets,stops, rollers etc complete all as specified and as directed.

S&F for Junction boxes (1 to 4way) 25 mm complete all as specified and as directed.

S&F RJ45 computer socket to be connected with existing LAN cable including crimping the cable and jointing complete all as specified and as directed.

Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protection pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion. (h) Earth lead wire upto 20 m will be included Note:- If the desired value of resistance not obtain, the eathing will be re-done without any cost

S&F fittings with recessed type LED down lighters 12 W, 230V, 50 Hz , THD<10%, CCT 6000K , surge protection upto 2KV, lumen 100 lm/watt round/square as specifiedby EIC including driver complete all as specified and as directed.

S&F LED light fitting 10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 230V, 50Hz , CCT 6500K, THD<10%, surge protection upto 2KV complete all as specified and as directed.

S&F sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.

S&F MCB single pole & neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed.

S&F LED baton fitting 2' length including drivers having energy consumption, 10/11W ,230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and directed.

S&F Exhaust fan metallic body 300 mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose with making holes complete all as specified and directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc. complete all as specified and directed. Note: If flexible connection pipes does not come with the product, it will be supplied and fixed by the contractor at no other cost

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded c

opper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one 5A socket point controlled by one, one way switch. complete all as specified and directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade or in casing caping whereever required concealed in wall of the following sizes :- 2x1.5 Sqmm with earth wire of 1x1.5 Sqmm. complete all as specified and directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

Supply, install, commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses,single phase 220-240 V, 50 Hz, made out of MS/ CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS - CRCA 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 3-4 m/sec air velocity at floor level for door opening working between temperature range of -10 to 45 degree C and upto relative humidity of 90% and air discharge of not less than 2700 CMH as complete all as specified and directed.

Supply and fix Double wall corrugated High Density Polymer Ethyl(HDPE) pipe for laying of electric cable of size 50 mm outer diameter and 38 mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches, wall, poles including bends, sockets and other connected accessories complete all as specified and directed.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened,PVC bedded, galvanised steel strip or wire armoured,electric power cables ( heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq mm,4 core including testing after laid and jointed complete all as specified and directed.

All as per Item No. 109 above but exceeding 1.5 mtr but nexc 3.0 mtr complete all as specified and as directed.