SPECIAL REPAIRS REPLACEMENT OF LT PANELS, REWIRING OF CERTAIN OMQS SMQS, ADDN ALTN TO BLDG NO. T8 , T11 AT NARAINA HILL TOP COMPLEX, PROVN OF KITCHEN CABINET AND KITCHEN SLAB, CERTAIN OTHER WORKS IN SMQ AND SPL REPAIRS TO BUILTIN WOODEN CUPBOARD ETC

Amount

Supply, install, testing, and commissioning in replacement factory made feeder pillar compartmentalised outdoor type ,weather proof ,dust and vermin proof double door front and rear openable made out of 3.15 mm thick CRCA sheet and angle iron 45x45x 6mm duly powder caoted ,suitable for floor /platform mounting of CPRI certified and IP65 class suitable for 415 volt ,3 phase ,4 wire ,50 hz AC supply sustem having busbar chamber with insulated aluminum busbars of rating 400 amps installed on porcelain /SMC insulator with apron for cable entry ,closing locking arrangement with and including internal wiring with PVC insulated solid ,copper conductor FRLS cable ,IS 694 marked ,1100 volt grade of appropriate size (but not less than 2.5 sqmm ) and comprising of the following :-

(a) MCCB 4 pole 250 Amps 35 KA-01 Nos (adjustable thermal & magnetic setting) (For incoming). (b) MCCB 3 pole 100 Amps 25 KA-02 Nos (fixed thermal & magnetic setting) (For Outgoing). (c) MCCB 3 pole 63 Amps 10 KA-02 Nos (fixed thermal & magnetic setting) (For Outgoing). (d) MCB TPN 40 Amps 10 KA-02 No (For Outgoing). (e) MCB SPN 16A 10KA-2 Nos (f) Automatic timer switch current rating 40 Amp 4 pole 415 volt -01 No (g) Digital multi function meter (Volt meter 0-500V,Ammeter 0-400A, frequency meter & power factor meter) of size 96mmx96mm with programmable CT ratio with back up protection by 2 A MCB SP. (h) Indicating lamp 240 volts LED type - set of three (j) Internal All links & control cable and inspection lamp -01 (k) CTs 400 / 5 Amps - set of three

Supply, install, testing, and commissioning in replacement of factory made universel mounted type on wall mounted meter cum distribution board in door type compartmentalized drg, single front door opening , copper busbar of 200 Amp TPN and made of CRCA sheet 1.6 mm thick powder coated of suitable size of comprising following assecessories :-

(a) MCCB four pole 200 Amp 415 Volt 25 KA (fixed thermal & magnetic setting) -01 No ( incomimg ) (b) Indicating Lamp -01 Set ( RYB) (c ) MCB DP 63 Amp 240 Volt 16 KA -20 Nos (d) Space for Metering cubical with front locking devices including tamperd glass -16 No's - 5 Qty, 9 Nos - 1 Qty, 20 Nos - 1 Qty, 7 Nos - 1 Qty, 5 Nos - 1 Qty. (e) Digital multi function meter (Volt meter 0-500V,Ammeter 0-200A, frequency meter & power factor meter) of size 96mmx96mm with programmable CT ratio with back up protection by 2 A MCB SP. Note :- All House electric Meter remove existing place and to be shifted / fixing in the new panel to supplied by the contractor and cable connecton and other accessorie are to be required at site including this quated rate nothing extra pay for the contractor.

Supply and fix of factory made epoxy polyster powder coated distribution board SP&N 8 way fabricated from minimum 1.6 mm thick CRCA sheet double door (IP-42 protection) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP RCBO or DP MCB and RCCB as incomer and 6 SP MCB's as outgoings complete all as specified, directed and confirming to IS: 8623.

Supply and fixing in replacement of MCB single pole 6-32 Amps 230 volts 'C' series complete all as specified and directed.

Supply and fixing in replacement of MCB single pole and neutral 40 /63Amps 230 volts 'C' series complete all as specified and directed.

S&F in repacement of submain wiring with unsheathed multi-stranded copper conductor FRLS grade cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 20mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core and one run of 6.0 Sqmm PVC insulated copper conductor FRLS grade cable for earth continuity wire complete all as specified and directed. Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.

S&F in repacement of submain wiring with unsheathed multi-stranded copper conductor FRLS grade cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 20mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core and one run of 4.0 Sqmm PVC insulated copper conductor FRLS grade cable for earth continuity wire complete all as specified and directed. Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and directed.

Supply and Laying of cable XLPE Insulated screened PVC bedded, Galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sq mm 3.5 core. complete all as specified and directed.

Supply and Laying of cable XLPE Insulated screened PVC bedded, Galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sq mm 3.5 core. complete all as specified and directed.

Excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and directed.

Removal of excavated material/surplus soil to a distance n exc 50m and depositing where directed at a level n exc 50m above the starting point complete all as specified and directed.

Supply and filling river sand including spreading and watering complete all as specified and dirceted. Note : Punned down thickness shall be measured and paid .

M&L for sub class ‘B’ bricks old size laid flat dry in trenches over cable, across the direction of cable complete all as specified and directed .

M & L for Boring of holes below 600mm under road,pavement,hard standing by trenchless technology using ultra sound technique and necessary machine includung HDPE pipe of 150mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supply and fix GI pipe light grade of size 80mm dia for cable protection in trenches at PCC poles for loopin/loopout of cable and cable entry at bldg/block end, complete all as specified and directed.

Taking down copper/Aluminium pt wiring (light, Fan, socket or power) including fitting such as switch , socket C/roses , lamp holders, tube light fitting wooden boards, bell ., call bell, MCBs & regulators etc & making good to distrubed surfaces & maching with the existing colour of wall/Floor etc complete all as specified and directed.

Taking down old unserviceable main switch/DBs including making good the disturbed surface complete all as specified and directed.

Taking down sub main wiring of any size complete all as specified and directed.

M&L for point wiring with PVC insulated and unsheathed cable 1.5 Sqmm (Nominal area) ISI marked FRLS grade stranded copper conductor single core including medium grade PVC conduit not less than 20mm dia for point wiring, concealed in wall / false ceiling modular metal flush terminal boxes & cover plate with frame of required module and colour with all accessories including 1.5 Sqmm PVC insulated and unsheathed stranded FRLS grade copper cable to common earth and connecting to earth dolly including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green complete all as specified and directed by for the following :-

One light point controlled by one way switch.

One fan/exhaust fan/Air ciculator /bell point controlled by one way switch.

One 5 pin socket outlet 5/6 amps on independent board .

One 5 pin socket oulet 5/6 amps on same board .

One bell/buzzer point controlled by one bell push on independent board

M&L for point wiring complete with stranded copper conductor 2.5 sq mm single core (nominal area) PVC insulated and unsheathed FRLS grade cable 1100 volts grade drawn in and including medium duty concealed PVC conduit conforming to IS : 9537 (Para-3) and ISI marked not less than 25 mm dia with 1.6 mm thick concealed pressed steel terminal boxes factory made and painted with stove enameled black , top cover 2.8 mm thick plastic laminated sheet of required colour fixed with brass screw and washers with all accessories including single core stranded copper conductor 2.5 Sqmm single core FRLS grade connected PVC unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly all as specified for one 6 pin socket outlet two in one 16/6 amps on an independent board.

Supply and fix switch piano, flush type single pole, one way, 5/6 Amps, 240 volts complete all as specified and directed.

Supply and fix switch piano, flush type single pole, one way, 15 Amps, 240 volts complete all as specified and directed.

Supply and fixing socket outlet 2 in 1, 3/5 pin 5 Amps complete all as specified and directed.

Supply and fixing socket outlet 2 in 1 , 3/5 pin 5/15 Amps flush type complete all as specified and directed.

Supply and fix three terminal ceiling roses, 3 phase, PVC/Polycarbonate, isolated body complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

S&F of bell push , 5 amps, single pole, one way complete all as specified and directed.

S&F in replacement of call bell, Ding dong type, 230 volts AC single pole complete all as specified and directed.

S&F LED tube light fitting, 4 feet long, along with fixture,18W complete with all accessories with flexible 2 core copper conductor wire of required length including taking down old existing u/s light fitting of any type and size complete all as specified and directed.

S&F decorative LED mirror light fitting of dimension 300mm (LINNET) 07 Watt with flexible 2 core copper conductor wire of required length including taking down old existing u/s light fitting of any type and size complete all as specified and directed.

M&L for point wiring complete with stranded copper conductor FRLS grade 4 sq mm single core (nominal area) PVC insulated and unsheathed cable 1100 volts grade drawn in and including medium duty concealed PVC conduit conforming to IS : 9537 (Para-3) and ISI marked not less than 25 mm dia with 1.6 mm thick concealed pressed steel terminal boxes factory made and painted with stove enameled black , top cover 2.8 mm thick plastic laminated sheet of required colour fixed with brass screw and cu washers with all accessories including single core stranded copper conductor FRLS grade 4 sqmm PVC unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly all as secified for one 3/5 pin socket outlet 2 in 1, 6/16 amps on an independent board complete all as specified and directed.

M&L for excavating in post holes (or similar holes) each n. exc 0.5 cu.m, as required directed by Engr-in-charge, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exceeding 25 cm, in hard/ dense, watering and removing surplus soil distance n. exc. 50m and making good surface complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm gde agg) as in foundation or sub base and mass concrete etc complete all as specified and directed.

S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410 - S complete all as specified and directed.

S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of semi circle/ curved shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240 complete all as specified and directed.

Supply & fix pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of colour approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & directed. Make-Tata/Bluescope/ CRIL Jindal as equivalent in approved makes.

Preparation of new steel surfaces and applying two coats of synthectic enameled paint.over one coat of red oxide primer complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed.

Providing and projecting chemical emulsion for post construction Antitermite Treatment along external wall where is treatment is provided using chemical emulsion at the rate of 7.5 ltr per sqm of the verticle surface of the sub structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed.

M&L for filling voids in masonary using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

M&L for treatment of soil under existing floor using chemical emulsion one ltr hole, 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

S&F in repair mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening including holdfast and fixing complete all as specified and as directed.

Cutting holes in brick walls or stone wall built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 depth exc half brick but n.exc one brick complete all as specified and as directed.

M&L for solid colour wood grain printed PVC sheets 5mm thick as in wall panelling incluive of solvent cement incl necesssary PVC frame work for fixing on brick or concrete wall with all as specified and as directed , Make :- Rajshree/Sintex

Dismantling aluminium work of any description not otherwise provided for complete all as specified and directed.

S&F 2nd class Hardwood plain, solid , straight chowkhats and frames, wrought framed rebated on the solid , rounded of chamfered , put together with glue pinned at joints, including the beading projection out side the frame and wooden surface smooth and even complete all as specified and directed.

S&F 40mm thick flush shutters, solid core construction with block board core and plywood face pannels, including both side face decorative veneered commercial type with lipping frame to match complete all as specified and directed.

S&F size of hinges 125mm butt hings extruded brass with mild steel hinge pine bright polished and fixed type B-11 complete all as specified and directed.

S&F 200mm long brass tower bolt, with barrel of extruded section and rolled of cast bolt complete all as specified and directed.

S&F 300mm long brass , sliding door bolts, with sand and die castn brass haps stable (bolt type) and and fixing bolts and rolled or down brass and fixed with barrel of extruded section and rolled or cast bolt. completed all as specified and directed.

S&F 150mm size, Extruded Brass handles fabricated type polished complete all as specified and directed.

S&F floor door stopper, 140mm overall length of cover plate brass body and tongue with hard drawn steel spring complete all as specified and directed.

S&F Door closer hydraulically, Aluminium (Extruded section body) , regulated designation No.3, universal type , suitable for door shutters of 851mm to 1000mm in width and over of wieght between 61 to 80 Kg and fixed complete all as specified and directed.

M&L brick work using sub class B old size brick in cm 1:6 straight as carved on plan exceeding 6.00 mt mean radius complete all as specified and directed.

M&L for granite (of any type) stone slab 12 to 14 mm thick machine cut and machine polised, as in Dado , skirting, etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall complete all as specified and directed.

M&L for 15mm thick in CM 1:4 as backing coat of dado/skirting etc complete all as specified and as directed

Demolition of plain cement concrete in any floors and paving not exc 15 cm thick above or below ground level including tiles if any complete all as specified and directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed

M&L coloured Machine pressed precast concrete interlocking paver block any shape and size confriming to IS 15658-2006 of 60 mm thickness , M-35 grade with Grey Cement and no pigment, complete all as specified and directed. Note : Sand cushion will be measured and paid seprately.

M&L for 20-25 mm thick chequered designer coloured tiles, Size, colour and shape as approved by GE, set and jointed in neat cement slurry and pointed with coloured cement to match etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 400mm graded stone aggregate as in sub base of floors.complete all as specified and directed.

Dismantling of floor , hearth , or wall tiling including cement mortar bedding ( but not backing) including removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base of floors complete all as specified and directed.

M&L 10 mm thick rendering / backing coat in CM 1:4 on vertical surfaces complete all as specified and directed.

M&L 15 mm thick screed bed in CM 1:6 as in floors for bedding of tiles complete all as specified and directed.

M&L glazed ceramic coloured/ printed tiles 450mmx300mmx7mm thick on walls as in dado/ skirting etc, joints free set and jointed in neat cement slurry and pointed in white cement and pigment to match the colour of tiles including one boarder tile at the top all around with matching boarder complete all as specified and directed. Make: CERA, Kajaria, Somany or equivalent in approved makes.

S&F Non skid coloured glazed ceramic tiles 7mm to 8 mm thick, area of each tile exceeding 0.18 Sqm but n. exc. 0.36 Sqm of each tile in floors etc, joints free set and jointed in cement slurry and pointed in white or coloured cement to match exist colour complete all as specified and directed. Make: CERA, Kajaria, Somany or equivalent in approved makes.

M&L for Vitrified ceramic coloured tiles 9 to 10 mm thick (square / rectangular) area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including and pointed complete all as specified and as directed

Taking down 15 mm bore mild steel tubing and connections incl cleaning for refixing or removal from site complete all as specified and as directed

All as per item No 72.00 above but for 20 mm bore.

S&F 15 mm bore mild steel water tubing medium grade galvanized with all fittings and fixture fixed to walls ceiling , concealed in walls or laid in floors complete all as specified and as directed

All as per item No 74.00 above but for 20 mm bore

S&F Oval type wash hand basin vitreous china 550x400mm, with pedestal incl waste coupling , waste pipe and all necessary action fittings complete all as specified and directed. Make - Cera or equivelent in approved makes.

S&F hole basin mixer without pop up waste system with suitable CP connections , Make- ESS ESS model Croma (V-211) or equivelent complete all as specified and directed.

S&F inrepair CP Wall mixture two in one single lever concealed diverter for bath and shower system complete all as specifid and directed . Make-Jaquar or equivalent in approved makes.

S&F towel ring chrome model TM 02 make-ESS ESS or equivelent complete all as specified and directed.

S&F Toilet paper holder model NL 55, Make ESS ESS or equivelent complete all as specified and directed.

S&F Acrylic shelf of size 46x13 Cm , complete all as specified and directed. Make- ESS Ess or equivalent in approved makes.

S&F in repair 15mm for bore with flange bibe coke chormium plated brass screwers for iron pipe or brass ferrule complete all as specified and directed. Make - Jaquar or equivalent in approved makes.

S&F inrepair bib taps CP brass fancy type screwed down , screwed for iron pipe or brass ferrule 15mm bore, complete all as specified and directed. Make-Jaquar or equivalent in approved makes.

S&F in repair in stop valve or angle coke, fancy type, CP, brass screwed down or high pressure , screwed both ends or iron pipes or for union 15 mm bore complete all as specified and directed. Make - Jaquar or equivalent in approved makes.

S&F in repair CP towel rail 600 mm long fixed with brass screws complete all as specified and directed.

S&F in repair corner shelf fancy type with CP railings 300x300 mm complete all as specified and directed.

S&F EWC including flushing cistern and its internal fitting ceat cover water jet,complete set , Make - Cera Model 2018 cruse P or S type concealed or equivalent in approved makes.

S&F in repair CP shower in rectangular shape of size 150mmx150mm or any colour with swivel joint , 15mm bore including rod fixed to divertor pipe complete all as specified and as directed.

S&F brass health faucet with 15mm bore pipe complete all as specified and directed.

S&F in repair PVC connection 15mm dia 45cm long with 02 nos. brass check nuts with washers complete all as specified and directed. Make - Poly plast or equivalent in approved makes.

S&F CP gratings 100mm dia complete all as specified and directed.

S&F in repair CP Brass liquid container fixed with and including brass screws complete all as specified and directed.

S&F in repair vitreous china urinal , half stall type white including CP spreader coupling and waste pipe etc. complete all as specified and directed.

S&F stainless steel letters (English/ Hindi) and grade SS-204 consisting of 300mm high , 50mm width and 25mm depth hollow walls fixed on wall surface or on ACP sheets board of any descriptions using stainless steel screws of suitable size or best qualith adhesive including LED light fittings in each letters complete all as specified and as directed.

S&F mild steel hanging brackets with steel screws for hanging of cupboards on wall complete all as specified and directed.

S&F 18/19mm thickBlock, grade 2 quality, interior grade, decorative type with decorative face veneer on one face terior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter & frame fixed with screws complete all as specified and directed.

S&F 18/19mm lapping particle board with 6mm thick teak wood fixed with nails complete all as specified and directed.

S& F continous hinges mild steel, bright finish or electrogalvonised width of flap30mm complete all as specified and directed.

S& F 75mm of handle extruded handle alluminuim alloy, fabricated type anodized complete all as specified and directed.

S&F Providing and fixing magnetic catcher, approved quality in cupboard/ ward robe shutter, including fixing with necessary screw etc. complete all as specified and as directed.

S&F Brass 2 lever , Locks , cupboards grade I, size 50mm and fixed complete all as specified and as directed.

Taking down cement plaster from brick work or concrete surfaces including ceilings /tile if any & racking out joints haking for keys & scrubing down with water etc. complete all as specified.

M&L15 mm thick rendering in CM 1:6 on fair faces of bricks or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coats of OBD over 5mm thick birla wall putty for smooth the wall surface including scraping old surface of wall complete all as specified.

M&L for preparation of new plastered surfaces of walls by brooming down or steel wire brushing scraping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or cement based birla putty etc and there after applying two coat of appex paint (wheather proof) over a coat of primer complete all as specified and directed. Note : The works shall be carried out in upto four stories bldgs

M&L for complete removal of existing treatment of old decorated surfaces of walls and applying plaster of parris to finish even and smooth surfaces and applying two coat of appex paint (wheather proof) over a coat of primer complete all as specified and directed. Note : The works shall be carried out in upto four stories bldgs.

M&L for preparing of old decorated surfaces of walls/ceiling (plastered or un plastered) including cornics etc and applying two coats of OBD over 3mm thick birla wall putty for smooth the wall surface including scraping old surface of wall complete all as specified and directed.

S&F in repair 75mm dia CI floor /nahani trap with grating CP including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair for 100 mm dia of cast iron soil, waste and vent pipe in any length with or without ears with cement joints laid and fixed to wall/flooring etc complete all as specified and directed.

All as per item No 111.00 above but 75 mm dia

S&F for 100 mm dia of cast iron bend (any radius) with duct foot or heel rest etc complete all as specified and directed by Engineer-In-Charge

S&F in repair double layered rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball brass valve high pressure with polythene float and flu nut screwed for iron pipe or brass and fixed and including dismantiling old tank and removing from site etc complete all as specified and as directed Make: Sintex or equivalent in approved makes.

S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium frame for door shutters, windows ventilators with one or more rebates with and including joining cleats for fixing etc complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium door shutteraluminium section weighing 0.55 Kg/RM including necessary jointing cleat glazing, clip,rubber packing, anodised aluminium snap beading, hinges type B-21 100mm long (2 No) suitable handle (2 no.) etc complete all as specified and directed. Note :- Glass panes in panels shall be measured and paid separately.

S&F fabricated anodized aluminium grill of size 75x100mm, using 5mm dia bars fixed to frames using U/V section runners complete all as specified and directed by Engr-in-Charge

S&F of 12 mm thick particle board preleminated on both side decorative choice etc complete all as specified and as directed

S&F of floor door spring etc complete all as specified and as directed

S&F of Mortice lock vertical type 4 lever etc complete all as specified and as directed etc complete all as specified and as directed

S & F in replacement of Recess mounted light with LED 36 Watt energy saving mounted luminaire suitable for 600mm x 600mm modular/POP/Gypsum ceiling complete all as specified and directed.

M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregates as in cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and directed. Note - Reinforcement shall be measured and paid separetly

M&L for TMT bars 6 to 8 mm dia as in reinforcement for concrete, cut to length, bent to shape required including cranking , bending spiraly for hooping for columns, hooking with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F Non skid coloured glazed ceramic tiles 7mm to 8 mm thick, area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm of each tile in floors etc, joints free set and jointed in cement slurry and pointed in white or coloured cement to match exist colour all as specified. Make: CERA, Kajaria, Somany or equivalent in approved makes.

Dismantling of granite/ Chequered tiles including cement motrar bedding (but not backing ) including removing serviceable stone to store and rubbish off the AF Stn premises complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work ( table rubbed and polished ) in steps, jambs, pillers window cills, cooking plateforms and like in cement mortar (1:4) including point in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete including grinding the edges half round and polishing complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs washers and waste incl bedding in cement mortar to dwarf walls or including fixing cantilever brackets and connecting union to pipe over all size 915mmx460mm bowl size 410x330x160mm complete all as specified and as directed

S&F in repair bib taps, C P cast copper alloy fency type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed. Make : Jaguar or equivalent in approved makes.

S&F in repair vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed.

Supply and fixed angular valve, 15mm dia, cast copper alloy,CP fancy type with long shunk and cup screwd down,high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed. Make : Jaguar/Sona/Parko or equivalent in approved makes.

S&F as in repair 15mm bore Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed

S&F in repair plate rack of stainless steel, sheet 1mm thick for kitchen overall size 750x900x250 mm ,fixed with plugs and washers on wall complete all as specified and directed. Make :- Prax yag or equivalent

S& F mild steel hannging bracket with steel scews for hanging of cupboard on wall.

M&L10 mm thick rendering in CM 1:4 on fair faces of bricks or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified.

M&L 5mm thick cement plastering in CM 1:3 on ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified

Removing all demolished / taken out material from site up to four storeyed building including loading the material in trucks /carts and throwing out form the AF Stn permisses exceeding 2 KM but not exc 5 KM from th ste of work.

Demolition /dismantling of reinforced in concrete in any description and any position , otherwise specified .

Dismantling of boarding boarding, any description, fixed in any position with nails or fixed with screws complete all as specified and directed.

Providing and fixing 6mm thick both side pre-laminated wood particle board as IS-15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in on the backing of racks , drawers cupboard , kitchen cabinet under kitchen counter etc all complete all as specified and directed.

Providing and fixing cupboad shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BMP grade marine ply as per IS-710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc with auto closing loading hinges (hdraulic type ) etc complete all as specified and directed. (Payment of providing and fixing auto closing hinges shall be paid separately).

Providing & fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS-710 of approved brand boxes, shelves, racks , almira, cupboard and drawers etc including necessary nails, screws etc complete all as specified and directed.

Providing and fixing 200mm stainless steel fancy handle of approved make fixed with SS screws etc complete all as specified and directed.

Providing and fixing 125mm stainless steel fancy handle of approved make fixed with SS screws etc complete all as specified and directed.

Providing and fixing stainless steel soft closing hinges at 0 degree hinges (hydraulic type ) of approved make/brand to cupboard shutter with full threaded steel screws including making necessary recess in board and finished etc complete all as specified and directed.

Providing and fixing 15mm outer dia stainless steel rode 1mm thick, with bracket for ward robe including full threaded steel screwscomplete all as specified and directed.

S& F drawers handles projection drop (50mm to 65mm on screw plate)

M&L for preparation of New plastered surfaces of walls, chajjas , parapet and fin facias etc, applying two coat of appex paint (wheather proof) over a 3mm layer of birla white putty complete all as specified and directed

S&F in repair 110mm bore PVC SWR pipe including rings,clamps and bends where required fixed to walls or as spout pipes complete all a specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed

S&F in repair MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Min weight 200gms)

S&F in repair 20mm Gun metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repair 25mm Gun metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed

Demolition of cement concrete (un-reinforced) in any description and in any postion incl tiles if any not other wise otherwise specifically provided for

M&L 50 mm thick PCC ( 1:24) type B-1 , 20 mm graded stone aggregates laid in alternate bays as in floor surface finished even and smooth without using extra cement including roughening to existing concrete surface and using cement slurry @ 3 Kg/Sq mtr before laying concrete in floor complete all as specified and as directed

S&F 3mm thick & 38 mm wide glass dividing strips complete all as specified and as directed.

M&L for non-skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm ason vertical surface such as skirting / dado etc and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick backing coat in CM (1:4) and pointed complete all as specified and directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed

M&L Machine pressed precast concrete interlocking paver block any shape and size confriming to IS 15658-2006 of 60 mm thickness , M-40 grade with Grey Cement and no pigment, laid over 20 mm thick sand cushion, over 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate all as specified and directed. Note : Sand cushion and sub of floor will be measured and paid seprately.

All as per item no 162.00 above but except paver block.

Net Contract Sum will be after deducting Sch of Credit of Rs 2,04,362.50

R. S. Associates