REPAIR/ MAINT / REWIRING OF INTERNAL ELECTRIFICATION, FITTINGS AND FIXTURES IN DOMESTIC AREA AND REPAIR/ REPLACEMENT/ MAINT OF GEYSERS, SOLAR WATER HEATER AND MCB DB BOX ALONGWITH ALLIED E/M WKS AT AF STN SURATGARH

Amount

BOQ (REPAIR/ MAINT / REWIRING OF INTERNAL ELECTRIFICATION, FITTINGS AND FIXTURES IN DOMESTIC AREA AND REPAIR/ REPLACEMENT/ MAINT OF GEYSERS, SOLAR WATER HEATER AND MCB DB BOX ALONGWITH ALLIED E/M WKS AT AF STN SURATGARH)

Servicing of geyser 25/50 litre capacity of any make, any type, opening up complete for inspection, descaling of internal tank, thermostatic pipe, base plate assembly by chemical treatment repairing by denting and brazing the leaking joints/points, carrying, out minor repairs, replacement of rubber gasket , reassembling and reinstallations and testing complete all as directed by Engineer-in-Charge (Note: Spare parts required to be replaced shall be paid separately under respective items of this schedule.)

Removing existing hot & cold water copper/PVC flexible pipe connection from geyser and S&F new brass chromium plated water pipe with brass nut and washers of good quality about 45cm long in hot & cold water connections and connecting complete

S&F of new heating elements spiral /circular type ISI marked 2.0/1.5 kW including rubber gasket/ washer suitable for 25/50ltrs capacity geyser, including taking down existing unserviceable heating element complete all as specified and as directed.

S&F of new thermostat including rubber/ PVC gasket to be set to a temperature not higher than the range of 70 degree Centigrade suitable for 25/50 ltrs capacity Geysers including taking down existing unserviceable thermostat complete all as specified and as directed.

S&F of Auto cut off of any capacity of geyser including taking down existing unserviceable Auto cut off complete all as specified and as directed.

Shifting & carefully water heater (Geyser) any capacity any make after removing electric & water connections from existing system for carrying out repairs(Repairs will be measured and paid separately) and refixing the same after carrying out necessary repairs to domestic area (SMQ/OMQ) all as directed by Engineer-in-Charge.

M&L painting with two coats of white synthetic enameled paint and marking MES No by black permanent marker and reconnecting the same after satisfactory completion of work all as directed by Engineer-in-Charge

S&F in repairs high pressure valve with dead weight suitable for 25/50 ltrs capacity Geysers including taking down existing unserviceable high pressure valve complete all as specified and directed.

S & F in replacement fusible safety brass plug of suitable as per existing all as directed by Engineer-in-Charge. complete

Supply and fixing Fancy type Bib tap of cast copper alloy with crutch screwed down, screwed for iron pipe of 15mm bore complete all as specified and directed.

Supply and fixing Stop valves, cast copper alloy, screwed down, high pressure, with crutch screwed both ends for iron pipe or for unions of dia 15mm all as directed by Engr-in-Charge.

Cutting/drilling or taping from existing 15 or 20mm dia G I pipe in position for branch connection of 15mm dia including suitable fitting/fixtures all as directed by Engr-in-Charge.

S & F in replacement of PVC insulated copper (flexible) conductor 2.5 Sqmm 3 core and connected to geyser.Make : Anchor/plaza/Finolex

Welding with new brass studs for holding of heating element with replacement of suitable element holding clamps-3 nos. complete all as directed by Engineer-in-Charge.

S & F in replacement Indicator lamp round/flat type of size & shape as per existing suitable for 25/50 litre capacity geyser working on 230 Volts AC Supply including necessary connections etc complete all as directed by Engineer-in-Charge.

S&F of bottom covers (set of two halves) duly painted made out of Aluminium /MS sheet of 18 SWG suitable for 25/50 ltrs capacity Geysers including taking down existing unserviciable bottom covers complete all as specified and as directed.

Supply and fix plug top 20/32 Amp suitable for any type of geyser connection all as specified and directed by engr-in-charge

Supply and fix NRV of 15mm dia all as directed at site all as specified and directed by engr-in-charge

S&F Anchor fastning(04 Nos ) of suitable size for fixing geyser make good disturbed surfaces after dismantling old one all as specified and directed by engr-in-charge

S&F in replacement of GI Pipe medium grade 15 mm size fixing in wall with clamps,nut,bolts etc complete all as specified and as directed

S&F water heater outer cover suitable for 25ltrs. Capacity of existing make including taking out old unserviceable.

S&F water heater inner tank suitable for 25ltrs. Capacity of existing make including taking out old unserviceable.

M&L for cleaning including de-scaling of flate plate collector tubes and arresting leakages by using Dummy gaskets/Hole gas kits, Threaded flange / normal flange complete for solar panel suitable of 100/200/500 LPD capacity of solar water heater complete all as specified and as directed.

M&L for Pressurised hose pipe including O'rings suitable for 150/200/300LPD capacity of solar water heater complete all as specified and as directed.

Supply and fixing in replacement of heating element assembly 3/5KW suitable to size of solar water heater all as specified and directed by engr-in-charge.

Supply and fix in repairs Thermostat of temperature range 0-80 degree C suitable for Solar water heating system of any capacity with necessary fixtures including taking out unserviceability one complete all as specified and as directed.

Supply and fixing in replacement of old solar panel glass suitable for 200/300/500 lts all as specified and directed by engr-in-charge

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 2.5 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2.5 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 2.5 sqmm cable alongwith one run of 2.5 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

servicing and minor repair of electrical chimney any type to check fan motor, removing grease, grime, and debris from interior chimney, clean the filters and ducts, check electrical wiring, complete serviceable of electric chiminey all as specified and directed by Engineer -in- charge.

Taking down unserviceable electric chiminey fan motor any size/any make dismantling cutting and removing of old burnt windings and rewinding with super enamelled copper winding wire of required size including allied insulation material, varnishm sleeves, etc greasing, oiling, re-assembling testing and refixing in the same position, complete all as specefied and directed by the engineer- in-charge.

Attending day to day complaints lodged in complaint register or vynus.org at AF Stn Suratgarh domestic area. The contractor will adhere time schedule for attending complaints as directed by Engr-in-Charge as follows: (a) Attending complaints for checking the existing electrical items for continuous electric supply including carrying out minor repairs etc as required to make the item functional and replacing fuse, small pieces of copper wire, copper cable as of suitable size at site, insulation tape roll etc., Attending minor repairs such as testing, connections, fittings, nut, bolts screws etc to ceiling fan, exhaust fan (without taking down), shifting/refixing of LED light fittings, switch & socket, MCB etc, emergent complaints i.e. no light, earth leakage, short circuit, neutral break in mains/ sub mains/ internal circuits of existing electrical system of main building/ block and . required to make the system in order/ functional with insulation tape roll, copper thimbles, glands, earthing wire as required at site complete all as specified and directed by Engineer-In-Charge (this will be included in unit rate). Notes:- (i) The complaint for "No Light" shall be attended immediately/ On Priority. (ii) Contractor should be submit the complaint register alongwirth complaint slip verfied from JE E/M or Engr-in -charge. (iiI) In case daily complaints are not attended,per complaint per day penalty recovery shall be charged Rs. 200/-

M&L for in replacement of sub-main wiring (concealed) with two single core 4 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of masonry including 25 mm dia non-metallic PVC conduit fixed in wall including 4 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by Engr-in-charge.

M&L for in replacement of sub-main wiring (concealed) with two single core 6 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of masonry including 25 mm dia non-metallic PVC conduit fixed in wall including 6 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by Engr-in-charge.

M&L for in replacement of sub-main wiring (existing concealed PVC conduit) with two single core 4 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through existing PVC/steel conduit including 4 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by Engr-in-charge.

M&L for in replacement of sub-main wiring (existing concealed PVC conduit) with two single core 6 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through existing PVC/steel conduit including 6 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by Engr-in-charge.

M&L as in replacement of sub-main wiring (Surface) with two single core 4 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn on and including 25 mm dia non-metallic PVC conduit fixed on wall including 4 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by Engr-in-charge.

Taking down carefully aluminum point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

M & L for point wiring (concealed) complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit, ISI marked, 19/20 mm dia including all accessories, concealed in walls/floors/ceilings etc by cutting chases using machine and making good the disturbed surface, with and including sunken type pressed steel/welded MS terminal box 1.2 mm thick bakelite laminated sheet top cover 3 mm thick/Modular boxes with cover and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed by Engr-in-charge.

(a) One light/fan/exhaust fan point controlled by by one switch

(b) One bell/ buzzer point controlled by one push switch.

(c) One switch socket outlet 3 pin 6 amp on same board.

(d) One light point controlled by two 2-way switches, with cables

All as per item No 38 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 5 amps on Independent board.

All as per item No 38 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 15 Amps on independent board.

All as per item No 38 above but 4 sq mm cable size with 4 sq mm earth continuity wire for one AC point Note for Item No. 32,33 & 38 to 41:- The disturbed surfaces of wall for concealing the wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate for point wiring shall be deemed to include the cost of making good.

M & L for point wiring (surface) complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn through and including non metallic medium grade rigid PVC conduit , ISI marked, 19/20 mm dia including all accessories on the surface of walls/floors/ceilings and making good the disturbed surface, with and including sunken type pressed steel/welded MS terminal box 1.2 mm thick bakelite laminated sheet top cover 3 mm thick/ Modular Boxes with cover and 1.5 Sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed by Engr-in-charge.

(a) One light/fan point controlled by one switch.

(b) One 3 pin socket outlet 5 amps on independent board.

(c) One bell point controlled by one bell push switch

(d) One light point controlled by two 2-way switches.

(e) One switch socket outlet 3 pin 6 amp on same board.

All as per item No 42 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 15 Amps on independent board.

All as per item No 42 above but 4.0 sq mm cable size with 4.0 sq mm earth continuity wire for one AC Point.

M&L for point wiring complete with 1.5 Sqmm (existing PVC/steel conduit) FRLS PVC insulated, multi stranded, copper conductor cable unsheathed in existing concealed PVC conduit and PVC insulated copper conductor cable of size 1.5 sq mm as earth wire , connected to common earth dolly and replacement of aminated sheet cover of 3 mm thick for mounting swiches,socket,regulator suitable for mounting switches all as specified and as directed by Engr-in-charge for the following :-

(a) One light/fan point controlled by one switch.

(b) One bell point controlled by one bell push switch

(c) One light point controlled by two 2-way switches, with cables

(d) One switch socket outlet 3 pin 6 amp on same board.

(e ) One 3 pin socket outlet 6 amps on independent board.

All as per item no 45 above but One 3 pin socket out let 15 Amps on independent board, with cables 2.5 Sq mm size and earth wire 2.5 sqmm.

All as per item No 45 above but 4.0 sq mm cable size with 4.0 sq mm earth continuity wire for one AC Point.

Supply and fixing for Switch modular type, single pole one way 6 Amps, 240 volts Ac suitable for modular switch boxes, all as specified and as directed.

Supply and fixing for Switch modular type, single pole two way 6 Amps, 240 volts Ac suitable for modular switch boxes, all as specified and as directed.

Supply and fixing for socket modular type 6 Amps, 3 pin , 2 module,240 volts all as specified and as directed.

Supply and fixing for switch modular type 16 Amps, 1 module,240 volts all as specified and as directed.

Supply and fixing for socket modular type 6/16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed.

Supply and fixing for bell push, modular type, 6 Amps, 1 module, 230 volts all as specified and as directed.

Supply and fixing for 0-4 step Modular type electronic regulator for ceiling fan, 240 volts, 100 Watts humfree single pole, all as specified and as directed.

Supply and fixing for door bell ding dong, AC, 230 Volts, single pole.

Supply and fixing for switch piano flush button single pole one way 6 amp 240 volts, all as specified and as directed.

Supply and fixing for Socket outlet, flush type 2 in 1, 3 pin, 6 amps, 240 volts, all as specified and as directed.

Supply and fixing for switch piano flush type single pole two way 6 amps 240 volts, all as specified and as directed.

Supply and fixing for switch piano flush button single pole one way 15/16 amp 240 volts, all as specified and as directed.

Supply and fixing for Socket outlet 2 in 1, 3 pin, 5 and 15/16 amps, flush type, 240 volts, all as specified and as directed.

Supply and fixing for bell push switch, single pole, one way flush type, 5 Amps, 240 volts, all as specified and as directed.

Supply and fixing for 0-4 step piano type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed.

M&L for ceiling rose, surface bakelite, 65mmx 50mm, three terminals, complete all as specified and directed.

Supply and fixing for Boxes junctions Boxes, plastic, round,four terminals, all as specified and as directed.

S&F batten holder, PVC Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and fixing self ballasted LED retrofit Bulb 5 Star Bulbs 9 Watt with PBT body shell and PC diffuser , 210 degree wide distruction CCT 6500K , B-22 cap, (PinType , ,230 V pf-0.95 (min), complete all as specified and directed

S&F in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F in replacement of LED light fitting mirror optic type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F in replacement of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable sizecomplete with IP 65/66 protection, complete all as specified and directed.

S&F in replacement of LED 2x2 backelite panel light 35/36 Watt environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaries with high brightness SMD LEDs as light source 28 Watt with nominal system lumen output of 2800 lumens and a minimum system efficancy of 100 lm/W. The luminarie shall have a rated system lifetime of 50,000 burning hours at L70. The luminarie should have a color temperature of 6500K and CRI > 70. The luminarie shall meet IP 66 rating and IK 09 rating with THD < 20% and PF >0.9, complete all as specefied and directed.

Supply and fixing in replacement of round/square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specefied and directed.

Supply and fixing in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for surface ceiling including connecting up with driver three core flexible copper conductor cases of suitable size and square surface accessories module for Trim Plus LED Panel, complete all as specefied and directed.

Supply and fixing in replacement of round/square shape 12/15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for surface ceiling including connecting up with three core flexible copper conductor cable of suitable size and square/round surface accessories module for Trim Plus LED Pane complete all as specefied and directed.

Supply and fix driver for 8 to 36 Watts LED ceiling light luminaries complete all as specified and directed by Engr-in-charge.

Supply and fixing 1 Module grid frame with cover including blank plate

Supply & fixing 3 Module grid frame with cover including blank plate, complete all as specified and directed

Supply & fixing 4 Module grid frame with cover including blank plate, complete all as specified and directed

Supply & fixing 6 Module grid frame with cover including blank plate, complete all as specified and directed

Supply & fixing 8 Module grid frame with cover including blank plate, complete all as specified and directed

Supply & fixing 12 Module grid frame with cover including blank plate, complete all as specified and directed

Supply & fixing Hylum sheet of size 10"x12" with screws, complete all as specified and directed.

Supply & fixing Hylum sheet of size 9"x11" with screws, complete all as specified and directed.

Supply & fixing Hylum sheet of size 8"x5", with screws, complete all as specified and directed.

Supply & fixing Hylum sheet of size 5"x5", with screws, complete all as specified and directed.

Taking down old U/S light fitting and Supply and fixing building security LED light fitting 35 Watt 230 V AC outdoor type with pressure die cast hosing with integrated lenses and high power LED's with efficancy >equal 100 lumens per watt. complete with IP 66 protection and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/25 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener complete all as specified and directed.

Supply and fixing post top lantern LED type 20 watt, 230 volts AC outdoor type with decorative post top for 360 degree IP 65 protection with impact and corrosion resistant complete with driver and lamp complete

Supply and laying as in replacement cable passing through pipe, 1100 volts grade heavy duty with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm 3 core in service connections complete all as specified and directed.

S/F in replacement of sheet metal enclosure with socket plug top single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 amps , 240 Volts, complete all as specified and directed.

Supply & Fixing in replacement of sheet metal enclosures Triple pole and neutral earth enclosure with a three pin and earth plug and socket complete with one triple pole MCB 32 amps, 415 volts, complete all as specified and directed.

Supply and Fixing in replacement of Sheet metal Vertical double door DB 4 Way, 415 Volt, TPN with 200 Amps rated bus bar complete with MCCB as incoming and MCB's SP as out Going and fixed. complete all as specefied and directed.

Supply and Fixing in replacement of Sheet metal double door DB 4 Way, 415 Volt, TPN with 200 Amps rated bus bar complete with MCCB as incoming and MCB's SP as out Going and fixed. complete all as specefied and directed.

S & F of sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 12 way with 200 amps rated busbar, 240 volts, as per IS-8623, including taking down old unserviceable single phase DBs, all as specified and as directed.

S & F of sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 8 way with 200 amps rated busbar, 240 volts, as per IS-8623, including taking down old unserviceable single phase DBs, all as specified and as directed.

S & F of sheet metal enclosures for DB's for incorporating MCBs, ,4 way, IP-43 double glazed door with 200 amps rated busbar,240 volts, as per IS-8623, including taking down old unserviceable DBs, all as specified and as directed.

S & F of MCCB four poles, 100 Amps, breaking capacity 16 KA , confirming to IS-8828, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

S & F in replacement of MCCB four poles, 125 Amps, breaking capacity 16 KA , confirming to IS-8828, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

S & F in replacement of MCB TPN four poles,40 to 100 Amps, breaking capacity 10 KA 'C' curve confirming to IS-8828, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed .

S & F in replacement of MCB TP 3 poles,25 to 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS-8828, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed .

S & F in replacement of MCB SPN 40 to 63 amps 'C' series, breaking capacity 10 Ka, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc.

S & F in replacement of MCB SP, 6 to 32 Amps, C series, breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc.

M & L for replacement of Earthing complete with galvanised steel plate electrode, 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to earthing lead of 4 mm dia galvanised iron or steel wire all as shown in elcetrical plate No.3 to the earthing test point all as specified and as directed. Note :- the cost of excavation and earth work PCC pit and CI cover funnel & watering pipe, wiremesh, charcoal dust and common salt shall be deemed included in the unit rate for earthing all as specified and as directed.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

m/s krishna builders (BID ID -3485241)

M/s Shubham Enterprises (BID ID -3491353)

AGGARSAIN BUILDERS (BID ID -3483885)

MAJOR REFREGERATION AND ELECTRICALS (BID ID -3491355)

M. S. CONTRACTOR (BID ID -3485956)

SRI SAI CONSTRUCTION COMPANY (BID ID -3484658)