Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹47.1 L+₹54,685.86 (1.18%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹48.0 L+₹1.5 L (3.19%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹48.8 L+₹2.3 L (4.94%)Rejected-Finance NADUA GAON POST NADUA DIKOM DIST DIBRUGARH ASSAM 786 101 | DIBRUGARH | DIBRUGARH | ASSAM | 786101 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹48.9 L+₹2.4 L (5.14%)Rejected-Finance | L5 | Rejected-Finance Being other than lowest |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
16 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer AF Mohanbari
Garrison Engineer AF Mohanbari Mohanbari Post Dibrugarh Assam 786012
ADDN/ ALTN TO BUILDING NO NP-65 AT DINJAN UNDER GE (AF) MOHANBARI
2024_MES_660320_1
8001/588/E8
Open Tender
Civil Works
Item Rate
270 days
Dinjan
Class D category a(i)
7 documents required · 7 mandatory
₹500
Garrison Engineer (AF) Mohanbari
₹92,000
5 Oct 2024
18 Jun 2024
17 Jul 2024
18 Jun 2024
16 Jul 2024
2 Jul 2024
Amount
Surface excavation n. exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches not exceeding 1.5 M wide and not exceeding. 1.5 M in depth for foundation, etc. and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches exc. 1.5 M in depth for foundation, etc. and getting out in soft/loose soil complete all as specified and direced.
M & L for PCC 1:4:8 Type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
M&L RCC M-25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M & L for RCC M25 Design Mix as in column above GL and the like complete all as specified and directed.
M&L RCC M-25 (Design mix) as in lintel/ roof beam complete all as specified and directed.
M & L for RCC M25 Design Mix as in slab supported on wall beams and columns in floor, balconies desk slab, lintels and in shelves and the like complete all as specified and directed.
M & L for damp proof course to horizontal or vertical surfaces including necessary formwork, 40mm thick, in cement concrete 1:2:4 type B0 complete all as specified and directed.
Form work to sides of concrete foundation, footings, base of columns, raft and raft beems, sides and soffits if any of foundation and plinth beems and similar work, verticle or to batter of rough finished surfaces of concrete flat complete all as specified and directed.
Form work to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete square, rectangular or polygonal complete all as specified and directed.
Formwork to sides & soffits of floor/roof beams, lintel beams and the like rough finished of concrete flat surfaces complete all as specified and directed.
Form work to soffits of suspended slabs such as roof slab and similar items not exc 200mm thick for fair finished flat surfaces complete all as specified and directed.
M & L high strength deformed TMT steel bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M & L high strength deformed TMT steel bars, as in reinforcement, 6mm to 8mm dia, cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No 14 but 5mm to 10mm in stirrups, spacers and binders complete all as specified and directed.
M&L for Spreadig, levelling in layers n exc 25 mm thick and well ramming in floors including watering in soft/loose soil complete all as specified and directed.
M&L for brick work with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed.
Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and directed.
Removal of surplus soil not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
M&L for broken stone as in hard core of gauge n,exc 63mm, deposited, spread and leveled in layers n,exc 150mm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for PCC 1:4:8 type D2, 75mm thick (using 40mm graded stone aggregate) as in sub base in flooring work complete all as specified and directed.
M & L for PCC 1:3:6 type C2, 75mm thick (using 40mm graded stone aggregate) for plinth protection and surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for Non skid light coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc, matt superior finish flooring, set and jointed in neat cement slurry and pointed in white cement mix with pigments to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 as bedding layer for floor finishes complete all as specified and directed.
M&L Non skid ceramic tiles 7 to 8 mm thick light (Square/Rectangular) area of each tiles exc. 0.11 sqm but not exc. 0.18 sqm in floors etc, confirming to IS:15622 (2006) grade B II(a) matt superior finish floolring, set and jointed in neat cement slurry and pointed in white cement mix with pigments to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 as bedding layer for floor finishes complete all as specified and directed.
All as per item No 25 above, but on vertical surfaces set and jointed in neat cement slurry and pointed in white cement mix with pigments to match the shade of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
S & F Glazed ceramic coloured tiles of 300x200x7mm thick tiles on vertical surfaces using glazed economy finish grade B III ceramic tiles set and jointed in neat cement slurry and pointed in white cement mix with pigments to match the shade of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for brick work with subclass ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
M & L for rendering 15mm thick in cement mortar 1:6 on brick/concrete surface finished even and smooth without using extra cement on internal wall surfaces complete all as specified and directed.
M & L for rendering 20mm thick in two layers (12+8) in cement mortar 1:4 on brick/concrete surface as on external wall surfaces etc, finished and even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 5mm thick in cement mortar 1:3 on concrete as in ceiling surface etc., finished fair and even without using extra cement complete all as specified and direced.
M & L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping and similar works including necessary form work complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint 100% acrylic, any tinted as in (camouflage pattern), over a coat of cement based primer including washing floors, cleaning glass, joinery, electrical fittings, wiring etc, or drops and splashes complete all as specified and directed.
M&L Preparation of newly plastered surfaces of walls and applying 2mm thick wall care putty on plastered surfaces and distempering with oil emulsion distemper two coats complete all as specified and directed.
M&L Preparing newly plastered surfaces and applying white wash of three coats on ceiling complete all as specified and directed.
M & L for water proofing to RCC roof with APP membrance of 3mm thick and weight not less than 3.5 kg/sqm including coating the surface with oil based bituminous primer @ 0.30 litre / sqm (conforming to IS: 3384-1986) and finally finished with one coat of bituminous aluminium paint @ 110 gms/sqm complete all as specified and directed.
M&L for 10mm thick plaster in cement mortar 1:4 on RCC slab including using liquid WPC @ 200ml per bag of cement complete all as specified and directed.
S&F 5mm thick figured glass pin headed type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.
S/F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fixed with tinned tacks or galvanised wire staples complete all as specified and direced.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and direced. (only weight of grill to be measured for payment
S&F for solid PVC door frame of size 50x47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening as per specification and drawing. Make: (Rajashree or equivalent) complete all as specified and directed.
S&F for factory made solid PVC moulded door shutter with woodfree EPS, 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain coloured PVC sheet on back face as per specification and drawing complete all as specified and directed.
S&F bands, straps, hold fasts, etc. and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
Supply and fix 35 mm thick Flush door shutter, solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed.
M & L Preparation of new wood surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
S&F 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed complete all as specified and directed.
S&F 100mm size, mild steel butt hinge medium weight cold rolled & fixed complete all as specified and directed.
S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm size aluminum handles, cast type anodised complete all as specified and directed.
S&F vitreous china wash hand basin (WHB), white, flat back , size 550 mm x 400 mm excluding supply of taps, but including waste fittings, brass Chromium plated for glazed basins etc. with long screw shanks and flt nuts, flange end embedded in red lead cement and other end fixed, chain and plug and porcelain stopper and brackets including cutting for and pinning in ends of brackets or erecting stand, making connections to waste and supply pipes complete all as specified and directed.
S&F 15mm dia fancy type chromium plated pillar taps, cast copper alloy with capstan heads screwed down high pressure, with or without lettered 'Hot' of cold with long screed shanks and fly nuts screwed for iron pipe and fixed with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F EWC vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flush pipe anti syphonage pipe etc and with plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware or equivalent)
S&F vitreous China Urinal, half stall type white including Urinal spreader of CP, PVC waste fittings 32mm size, PVC connection of 15mm size with PTMT nuts of length 450mm long including brackets complete all as specified and directed.
S & F health faucet (ABS body) suitable for 15 mm dia pipe with 1.5m long tube and hook complete all as specified and directed.
S&F bib taps, fancy type, cromimum plated cast copper alloy, screwed down, screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F PVC low level flushing cistern 10 Ltrs capacity with all internal accessories and fixed to wall including provision of PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC etc complete all as specified and directed.
S&F15mm dia angle valves, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and direced.
S&F PVC connection 15mm dia size with PTMT nuts of length 450mm complete all as specified and directed.
S&F toilet paper holder of CP fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed.
S&F 1000 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed.
S&F 20mm bore brass gate valves,with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and directed.
S&F soap dish, vitreous china white, approximate size 160 x160x 90mm complete all as specified and directed.
S&F sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F 16mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having themal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings, fixed complete to walls, ceilings or in floors etc complete all as specified and directed.
All as per item No 67 here in before but 20mm outer dia pipes complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
All as per item No 69 above but laiid in trenches/ floor complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
All as per item No 71 above but laiid in trenches/ floor complete all as specified and directed.
S&F PVC (SWR) bends any radius for 110mm bore PVC pipe complete all as specified and directed.
S&F PVC (SWR) bends any radius for 75mm bore of pipe complete all as specified and directed.
S&F MS clamps for PVC (SWR) pipes 75mm bore made out to 50mm x 5mm flat and 16mm dia round bars, including bolts and nuts and securing to wall in PCC (1:2:4) and making good in cement mortar 1:3 complete all as specified and directed.
S&F PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as specified and directed.
S&F 75 mm outer dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.
S&F 100mm PVC (SWR), junction single, (Single T) equal or unequal, complete all as specified and directed
S&F 75 mm PVC (SWR) couplers complete all as specified and directed.
PVC 100mm (SWR) vent cowl complete all as specified and directed.
S&F powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fittings, glazing, wire gauge, rubber packing, aluminium beading etc, aluminium section weighing 0.55 Kg/m complete all as specified and directed.
Supply only Liguid water proofing compound ISI marked complete all as specified and directed.
Supply and fixed of tubular roof trusses (framed) trussed, purlins, crane gantries, rails, fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pleces, cleats etc complete all as specified and directed.
Supply and fixing for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fixing powder coated aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed.
Supply and fixed powder coated aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing complete all as specified and directed.
Supply and fixing 5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.
Supply and fixing 20mm dia curtain rod mild steel, chromum plated with fixing brackets, stops, rollers etc complete all as specified and directed.
Supply and fixing aluminium anojdised snap grid frame work as in false ceiling all as specified, size of grid 605 x605mm with aluminium main T section of size 36.5 x23.5 x 1.60mm including 6mm dia GI hangers complete all as specified and directed.
Supply and fixing for non-asbestos fibre cement building board, 4mm thick, fixed to aluminium frame work with screw as in ceiling in flat or sloping complete all as specified and directed.
M&L MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.
M & L Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and directed.
M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of bolt 16 to 20mm complete all as specified and directed.
M&L MS wind ties for roof including securing bolts and posts and struts in fencing including cutting top to shape, drilling holes notching for wire etc, conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L Antitermite treatment to back fill in contact with masonry @ 7.5 ltrs/Sqm complete all as specified and directed.
Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.
M&L for treating the top surface of filled earth with anti termite emulsion at the rate of 5 litres per square metre of surface area complete all as specified and directed.
M&L for treating the soil under plinth protection with anti termite emulsion at the rate of 5 litres per square metre of surface area complete all as specified and directed.
M & L for PCC 1:3:6 Type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M & L Brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.
M&L for Reinforced concrete pipes 150mm dia, class NP3, laid in trenches and jointed with collars complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in bed to drain pipes including packing under and haunching against the sides of the pipes after they are laid and tested for 150mm internal dia of pipe complete all as specified and directed.
Cutting into existing manholes of internal dia of pipe 150mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required .
M & L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and directed.
Excavation in post holes each n.exc 0.5 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc 50m and making good in soft/loose soil complete all as specified and directed.
M&L mild steel bars 10mm dia and over cut to length, bent to shape required including cranking etc confirming to Fe-290 (Gde-E-165) complete all as specified and directed.
Supply only MS chain link fencing, any size or type complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts etc including provision of binding wire complete all as specified and directed.
S&F Galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacting and straining and fixing to any type of standard rails, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed. (Each line wire to be measured)
M&L two coats of synthetic enamel paint over a coat of reoxide primer on steel surfaces including preparation of any description n exc 10cm width or girth complete all as specified and directed.
Supply, laying, jointing and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.
Excavation in trenches not exceeding 1.5 M wide and not exceeding. 1.5 M in depth for ftaking out/laying of under ground cable, pole, pipe, stay and getting out in soft/loose soil including making good disturbed surfaces such as hardstanding/footpath/pavements etc complete all as specified and directed.
M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm depth before laying of cable and 15 cm depth after laying and stretching the cable complete all as specified and directed. Note:- Punned thickness of sand shall be measured & paid.
M&L for well burnt sub class 'B' bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to length of brick including taking out old complete all as specified and directed.
M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with Galvanize earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering, water funnel complete all as specified and directed.
Supply and lay 3 laying (inner antimicrobial, outer UV stabilized) ISI marked, IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 32 mm including all fittings complete all as specified and directed.
Supply and lay 3 laying (inner antimicrobial, outer UV stabilized) ISI marked, IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 25 mm including all fittings complete all as specified and directed.
Supply and fix PPR Gate Valves (Brass Insert) of 32 mm bore of outer dia including all fittings complete all as specified and directed.
Supply and fix PPR Gate Valves (Brass Insert) of 25 mm bore of outer dia including all fittings complete all as specified and directed.
Cutting or screwing existing steel tubing for alteration or additions of suitable size for 50 mm dia complete all as specified and directed.
M & L for following point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for Phase connection and black colour cable to be used for neutral connection) including PVC conduit with all accessories including 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.2 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover complete all as specified and as directed.
Light/Fan/Exhaust fan/Bell point
5 amp socket on same boared
5 Amp switch socket on Independent Board.
All as per item No 125 here in before but 4.0Sqmm P.V.C insulated un sheathed cable with stranded copper conductor for 5 pin 6/16 Amp switch socket combination on independent board complete all as specified and as directed.
S&F of socket only 3 pin, 5 Amps flush type 230/240 V complete all as specified and as directed. ( For same Board only)
S&F of switch socket combination 2 in 1, 5/6 Amps flush type230/240 V complete all as specified and as directed. ( For Independent Board only)
S&F of switch socket combination 3 pin, 15/16 Amps flush type 230/240 V complete all as specified and as directed.
S&F of ceiling rose 3 phase/PVC/polycarbonate,isolated body,surface type with ISI marked complete all as specified and directed.
S&F of switch piano flush type 5/6 amps, 240 volt single pole one way complete all as specified and as directed.
S&F of Step type electronic fan regulator flush type 230 volt 5 speed control and connecting up in fix position complete all as specified and as directed.
S&F in repair of wall decorative ultra slim LED 18/20 Watt, 230 volts, 50 Hz, 4 feet, lighting fixture with extruded polycarbonate lighting fixture, environmental friendly, energy efficient ready to use pack including lamp complete all as specified and directed.
S&F in repair of ultra slim LED batten 10 Watt, 230Volts, 50 Hz, decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly including lamp, connection wire complete all as specified and as directed.
Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed.
S&F building security light LED type of minimum 3500 Lumens (35watts) pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twisted copper conductor cable of suitable size including bracket made of 32mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and directed.
Supply and fixing of factory made sheet metal enclosure for DBs double door, TPN, 415 volt, 4 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed.
Supply and fixing in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 10 to 32 Amp current carrying capacity complete with connection testing complete all as specified and directed.
Supply and fixing in repair of 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 63 Amps current carrying capacity complete with connection testing complete all as specified and directed.
M/S Build Tech (BID ID -3063215)
M/S C.P CONSTRUCTION (BID ID -3054640)
M/s United Builders (BID ID -3063758)
M/S R & R D ENTERPRISES (BID ID -3064057)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .