Loading
Loading…
Loading…
Tender Value
₹4.5 L
EMD Value
₹9,000
Closing Date
16 Apr 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELECTG
57 conditions · 13 needing a document upload
Whether Document verification certificate as per standard format uploaded
Whether electrical contractor's license, supervisor's license along with PAN Card of both contractor and supervisor uploaded.
Whether documents related to all mandatory requirements as mentioned in Clause no 5 & 6 of GCC part -I, Clause no 10, 11, 14, 15 & 16 of tender form 2nd sheet have been full filled and uploaded.
Whether documents relating to exemption of payment of EMD enclosed
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer should upload copy of the following documents self-attested / digitally signed by the tenderer or authorized representative of the tendering firm along with the tender. Tenderer(s) can use Standard formats available in the tender documents.
The list of personnel / organization on hand and proposed to be engaged for the tendered work. (Please refer Para-11(iii) of tender form 2nd sheet). Standard format attached as form no.5 in tender documents.
The list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work. (Please refer Para- 11(iii) of tender form 2nd sheet).
The tenderer should upload the supportive documents against the i)'Type of Firm' as mentioned below: *Sole Proprietorship firm: Notarized affidavit claiming the firm to be a sole proprietor firm * Company: MOA, AOA, Power of Attorney, *Partnership Firm: Deed of Partnership, POA and ii) an undertaking for not being Blacklisted / debarred as per Annexure-A. NOTE: In case of partnership firm, they should submit individual declaration of all partners not being Blacklisted / Debarred as per Annexure-A, otherwise the offer of the tenderer will be summarily rejected.
Each partner of the partnership firm should duly submit the filled in Annexure-V separately as per IRGCC-2022; Otherwise, the offer of the tenderer will be summarily rejected. Firms other than the partnership firm have to submit it as before.
Please upload certificate (Annexure - V(A)) and is to be given by attorney/authorized signatory/ each member of Partnership firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc).
The tenderer should upload Declaration regarding "Employment / partnership etc. of Retired Railway Employees" (please refer to Para 16(a) of tender form 2nd sheet). (Use standard "Form no. 2", available in tender booklet).
The tenderer has to upload Declaration regarding relation with any Railway Employees. (Please refer to Para 16 (c) of tender form 2nd sheet). (Use standard "Form no. 6", available in tender booklet).
Should a tenderer or contractor being an individual, have member(s) of his family or in the case of partnership firm / Company / Joint Venture(JV) / registered Society / registered trust etc. one or more of his partner(s) / share holder(s) or member (s) of the family of patterner(s) / share holder (s) having share of more than 1 % in the tendering entity employed in gazetted capacity in the engineering or any other department of the Railway, then the tenderer at the time of submission of tender, will inform the authority inviting tenders the details of such persons.
The tenderer should upload certificate of familiarization as per Chapter -4. (Use standard "Form no. 7", available in tender booklet).
The tenderer should upload GST registration certificate and PAN card.
For all tenders having advertised cost of Rs. 10 lakh or above, the contractor shall have to submit the option to take payment from Railways through a letter or credit (LC arrangement. The tenderer shall affirm having read over and agreed to the terms and condition of the LC option. The option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, therafter, during execution of contract (The tenderer have to submit the option take payment fro Railway through a Letter of Credit arrangement).
The tenderer should upload the bank details i.e. Name of Bank along with Bank Branch Code, Account Number as appearing in the cheque book, IFSC Code and PAN Number, dully certified by the Authorized official of of the bank to facilitate payment through ECS/NEFT/RTGS. In lieu of the bank certificate photocopy /scanned copy of a cancelled cheque and PAN card may be attached for verification of the above particular, otherwise the offer of the tenderer will be summarily rejected.
ELECTRICAL WORKS IN CONNECTION WITH"PROVISION OF ELECTRICAL LIFTING BARRIERS IN PLACE OF EXISTING MECHANICAL LIFTING BARRIERS AT 02 LC GATES (RV-124 & LJ-19) OVER SBP DIVISION".
SBP-ELECT-2026-T-275
SBP-ELECT-2026-T-275
Open
Works - General
6 Months
Sambalpur, Odisha
₹0
₹9,000
16 Apr 2026
25 Mar 2026
2 Apr 2026
70 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 4,47,199.42 | ||
| — | 34.00 | — | — | ||
| Concealed wiring for Light/ Fan/ Exhaust Fan/Call Bell Points/6Amp plug point on separate board by 1.5 sq. mm FRLS Cu. wire through PVC pipe with supply of materials (Flush type switch & socket). | — | — | — | 17,774.86 | |
| — | 6.00 | — | — | ||
| Concealed wiring of socket point 5/3 pin 16 Amp with copper wire and flush type switch and socket with supply of materials. | — | — | — | 2,214.18 | |
| — | 6.00 | — | — | ||
| Concealed wiring of socket point 5/3 pin 6 amp with copper wire and flush type switch and socket with supply of materials. | — | — | — | 710.58 | |
| — | 10.00 | — | — | ||
| Concealed wiring of sub main with 2(1x6 sq.mm) + 1x(2.5 sq.mm) PVC Cu. FRLS Wire. | — | — | — | 1,746.4 | |
| — | 80.00 | — | — | ||
| Concealed wiring of sub main with 2(1x4 sq.mm) + 1x(2.5 sq.mm) PVC Cu. FRLS Wire. | — | — | — | 10,350.4 | |
| — | 60.00 | — | — | ||
| Concealed wiring of sub main with 2(1x2.5 sq.mm) + 1x(1.5 sq.mm) PVC Cu. FRLS Wire. | — | — | — | 6,595.2 | |
| — | 18.00 | — | — | ||
| Supply of Indoor LED tube light Fitting 20 watt. | — | — | — | 5,045.76 | |
| — | 18.00 | — | — | ||
| Erection, fitting/Down lighter. | — | — | — | 847.8 | |
| — | — | — | Light/bulkhead | ||
| — | 10.00 | — | — | ||
| Supply of 1200 mm sweep 5 star rated BLDC fan. | — | — | — | 24,564 | |
| — | 10.00 | — | — | ||
| Fixing and testing of AC ceiling fan. | — | — | — | 433.7 | |
| — | 4.00 | — | — | ||
| Supply of Exhaust fan 300mm sweep. | — | — | — | 6,599.44 | |
| — | 4.00 | — | — | ||
| Erection, testing and commissioning of Exhaust fan. | — | — | — | 904.36 | |
| — | 2.00 | — | — | ||
| Supply & erection of 8-way MCB distribution Board (Sheet steel power coated, BUS bar, neutral link, earth bar, Din rail conforming to IS 13032-1991). | — | — | — | 1,833.96 | |
| — | 8.00 | — | — | ||
| SITC of 6-32Amp MCB SP, 10KA. | — | — | — | 1,888.72 | |
| — | 4.00 | — | — | ||
| SITC of 6-32Amp MCB DP, 10KA. | — | — | — | 2,108.48 | |
| — | 2.00 | — | — | ||
| Supply & erection of 2 Way sheet metallic enclosure for MCB fitted with Din Rail. | — | — | — | 724.92 | |
| — | 2.00 | — | — | ||
| Supply of ISI marked 63 AMP, 240V, MCB DP, C curve. | — | — | — | 2,416.94 | |
| — | 2.00 | — | — | ||
| Erection, testing & commissioning of Rly supplied MCB. | — | — | — | 15.3 | |
| — | 6.00 | — | — | ||
| Supply of 45-watt LED street light complete. | — | — | — | 12,370.68 | |
| — | 6.00 | — | — | ||
| Erection, testing & commissioning of LED outdoor fitting on SST/GI pole. | — | — | — | 1,528.44 | |
| — | 4.00 | — | — | ||
| Supply of single arm GI Octagonal pole 6 mtr height complete. | — | — | — | 32,647.64 | |
| — | 4.00 | — | — | ||
| Transportation & Erection of GI/SST pole. | — | — | — | 980.4 | |
| — | 1.20 | — | — | ||
| Excavation of pit and concreting for erection of GI Pole. | — | — | — | 3,825.52 | |
| — | 4.00 | — | — | ||
| SITC of Coil Earthing. | — | — | — | 591.24 | |
| — | 950.00 | — | — | ||
| Supply and laying of 63 mm dia DWC HDPE pipe (ISI marked) as per CPWD specification. | — | — | — | 1,73,935.5 | |
| — | 976.00 | — | — | ||
| Laying of cable in air/on wall/pole / through GI pipe/culvert/cable trench/HDPE pipe etc. | — | — | — | 24,712.32 | |
| — | 24.00 | — | — | ||
| Laying of HT/LT single cable across the road/Track as per Railway appd drawing. | — | — | — | 11,741.28 | |
| — | 32.00 | — | — | ||
| Supplying & making of cable route marker. | — | — | — | 13,605.12 | |
| — | 2.00 | — | — | ||
| Construction of cable trench (0.45x0.45 mtr) with 3-inch RCC cover. | — | — | — | 3,338.36 | |
| — | 2.00 | — | — | ||
| Provision of G.I pipe earthing as per CEE approved drawing. | — | — | — | 6,607.08 | |
| — | 20.00 | — | — | ||
| Supply & fixing of GI Flat. | — | — | — | 1,534.8 | |
| — | 2.00 | — | — | ||
| Supply of control and distribution panel for CLS supply of 60A, 10 kVA, AT as per RDSO Spec no. TI/SPC/PSI/CLS/0022 and as per CORE approved latest drawing No. JPE-041-1 sheet 1&2. | — | — | — | 67,085.48 | |
| — | 2.00 | — | — | ||
| Erection, testing and commissioning of CLS Panel. | — | — | — | 1,500.56 | |
| — | 2.00 | — | — | ||
| Junction Box comprising busbar 60Amp(02 no) and 63 Amp MCB DP. | — | — | — | 4,420 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
T-275-TenderBooklet_1.pdf
ATTACHMENT
IRGCC 2022
ATTACHMENT
IRGCCWORKS-2022_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .