REPAIR/MAINT OF KITCHEN PLATFORM AND ALLIED B/R WORKS AT MIL STN TALBEHAT

Amount

Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L15mm thick plaster in CM 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for rendering in cement mortar (1:3) 5mm thick as in ceiling surfaces finished even and smooth complete all as specified and directed.

Dubbing out average 15mm thick in CM 1:4 on irregular faces of walls or concrete chajjas (at any hight of building) etc including necessary scaffolding complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of wall surface and applying two coats of oil bound distemper complete all as specified and directed.

M & L preparation new plastered surfaces of walls and providing two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of New plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed

M&L for preparation of surface 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed

M&L for preparing plastered or unplastered old surfaces on ceiling applying one coat of white wash complete all as specified and directed.

M&L for preparing of surfaces of walls, pillasters, cornices etc by washing, rubbing down & stopping etc and applying one coat of oil bound distemper in any colour complete all as specified and directed.

M&L for Complete removal of existing treatment of surfaces of walls, pillasters, cornices etc and applying two coat of oil bound distemper in any colour complete all as specified and directed.

M&L for preparing of surfaces of walls by washing rubbing down & stopping of painted surfaces and applying one coat of cement base paint, in any colour complete all as specified and as directed.

M&L for preparation of plastered surfaces of wall and applying one coat of weather proof exterior emulsion paint complete all as specified and as directed.

M&L for preparation of old painted wooden surface of any description and applying one coat of synthetic enamelled complete all as specified and as directed by Engr-in-Charge

M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling wall and celling board (fibre, pulp, insulation etc) any thickness including cover fillets as directed.

S&F false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights as per direction of Engineer-in-charge.

Taking down wall panelling and similar work of any type incl removing to store or from store complete all as specified and directed.

S&F of 5mm thick PVC wall panelling of wooden texture and of any other shade as approved by Engr-in-charge including all accessoaries for fixing into wall, including PVC fillets 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame , PVC strips solvent, epoxy,corner and top finishes with beading,complete all as specified and as directed. Make :- Rajshri Plastiwood and equivalant make

S&F of 8mm thick HDF wooden laminate flooring of locking profile solution and of herringbone or staggered parallel pattern and of wooden texture and of any other shade as approved by Engr-in-charge including all accessoaries for fixing over floor, fillets,solvent,epoxy,corner and sides finishes with bedding,complete all as specefied and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and directed.

M & L for Non-skid coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.

M & L for Non-skid coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.

All as the item above but as in skirting but tile laid over 10mm thick CM (1:4) plaster complete all as specified.

M&L for coloured Glazed ceramic tiles 600 x 300 x 7mm thick tiles on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including cement mortar 1:4, 10mm thick plaster complete all as spd & directed.

M/L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand in vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor aprons etc laid / bedded and pointed in any mortar.

M & L for 20mm thick granite on kitchen platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and other similar situation. complete all as specified & directed.

M&L for 18-20mm thick machine cut Kota stone slab as in flooring staircase, riser & treads of steps etc over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing, grinding and polishing including 20mm thick screed bed in cement mortor 1:4 complete all as specified and directed.

Ditto as per Item No. 34 above but herein riser of steps, skirting, dado and pillar laid over including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.

All as per srl item above but 20 mm bore

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

All as per srl item above but 20 mm bore

M & L for refixing 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc.

All as per srl item above but 20 mm bore

M&L brick wall or plaster cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Ditto above item except brick complete all as specified and directed.

S&F in repair tubular stainless steel curtain rod 20mm dia with including fixing brackets complete all as specified and directed.

S&F decorative type knobs with bracket of Stainless steel fixing at end of curtain rod complete al as spd & directed.

S&F in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.

S & F in repair 15mm bore pillar tap, foam flow with flange, Half Turn/ Quarter turn, fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed.

S&F Half Turn / Quarter turn, 15mm dia CP central hole basin mixer without pop up waste system with 450 mm flexible hose for mixing of hot and cold water screwed for iron pipe and fixed complete all as specified and directed.

S&F Half/quarter turn chromium plated 15 mm bore wall mixture 2 in 1 with provision for over head shower with 115 mm LB pipe & wall flange complete with bend pipe and wall flange, complete all as spfd & directed ,

S&F in repair brass chromium plated towel rail 20mm dia D type 60cm long between flange all as specified and directed by Engr-in-Charge

S&F Sink made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union overall size not less than 495x429mm, bowl size 410x330x 160mm complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm bowl size 410mm X330mm x160mm complete al as specified and as directed

S&F in repair bevelled edge looking mirror 5.5mm thick of any size mounted on mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as spfd and directed by Engr-in-charge.

Dismantling of existing unserviceable water tank of any description capacity exc 250 Ltrs but n.exc 500trs capacity each complete all as specified and directed

Dismantling of existing unserviceable water tank of any description capacity exc 500 Ltrs but n.exc 1000trs capacity each complete all as specified and directed

S& F rotational molded synthetic (HDPE) water storage tank 500litre capacity (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I complete all as spd & directed.

S&F rotational molded polyethylene water tank of 1000Ltrs capacity (Cylindrical vertical with closed top) noticed and portion all as specified SSR Part-I complete all as spd & directed.

S&F in repair ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm.) complete all as spd & directed.

S&F in repair 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe all as specified and as directed

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples completed all as spd & directed.

S&F in repair Stainless steel Magnetic door catcher size 5.08x2.54x2.54 cm with plate completed all as spd & directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.

S & F figured glass pin headed type, 3mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane for steel or wooden windows/doors fixed with wooden beadand pin tacked complete all as specified and directed.

S&F in repair One piece ceramic floor mounted western water closet white with soft close seat cover including flush tank, trap and all fittings complete all as specified and as directed, Note:- The size, colour, design and Make shall be Approved by Engr-in-Charge.

S&F in repairs 18mm thick (one side colour decorative lamination & other side balancing lamination sheet) solid PVC board with cement solvent adhesive for shutter /kitchen cabinet/cup board shutter/ partition wall / wall cabinet and similar works complete all as specified & directed.(Note : Colour approved by Engr-in-charge)

S&F continuous (Piano) hinges, brass finish of whem open 30mm width of flaps complete all as specified and as directed

S&F 100mm size hasp and staple, aluminium anodized safety type, fixed with screws complete all as specified and directed

Demolition of Reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) complete.

S&F steel reinforcement of TMT Bars of size 8mm dia and over cut to length bent to shape as required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

M&L for form work, fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works flat n exc 200mm thick (Horizontal or slopping) etc. complete all as specified and directed.

M&L for form work fair finished to edges of concrete flats, treads floor and roofs n exc 20 cm wide and sides of RCC/PCC bends in walls (horizontal or slopping) and similar works exc 10 cm but n exc 20 cm wide complete all as specified and directed.

M & L for RCC 1:2:4 (Nominal Mix), type B-1, using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc. .complete all as specified and directed.

S & F in repairs 18 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets and similar work complete as per specifications and as directed by the engineer - in -charge.

S & F in repairs 18 mm thick Celuka ply / PVC of grade 1 quality of one side prelaminated and other side plain white or colour to make kitchen cabinet/ drawer shutters and similar work complete as per specifications and as directed by the engineer - in - charge.

S & F in repairs 12 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by the engineer - in -charge.

S & F in repairs 6 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet back covering and pull out drawer base complete as per specifications and as directed by the engineer - in -charge.

S & F auto closing hinges 35 mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed.

S & F Ball bearing runners 45 mm (length 20" to 25") Telescopic , full extension load capacity 50 kgs complete all as specified and as directed.

S & F stainless steel handles 100 mm size for kitchen cabinet/ any shutters complete all as specified and as directed.

S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795 x 500 x 150 mm with necessary fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (Thali basket) pull out type, size 530 x 500 x 200 mm with necessary fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm with necessary fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 x 200 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and directed by Engineer-in-charge.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed. Note:- opening of existing wind tie where required for taking down of AC sheet is deemed to be included in the rate quoted .

Dismantling of timber scantling 40 Sqcm and over in section in any position such as in rafter, purlins etc in unframed work complete all as specified and as directed

Dismantling of timber fillets , rails, posts, rafters, purlin etc under 40 sqcm in section, in any position in unframed work complete all as specified and as directed.

S&F rolled mild steel section work as in main and cross beam, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates and cooler stand and similar work confirming to Fe 410W(Gde E-250 quality A) complete all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick, Trapezoidal roofing profile with 190 mm Pitch & 29 mm depth of profile of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick,Trapezoidal roofing profile with 190 mm Pitch & 29 mm depth of profile of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed.(For sun shed)

S&F plain polycarbonate roofing sheet of thickness not less than 2mm of colour as reqd by Engineer-in-charge fixed with self tapping screws as specified & directed.

Supply and fixing 10mm thick toughned glass as in hinged doors, partitions automatic door sand similar work including cutting to shape, drilling holes required including taking out old broken/ unservicable glass complete all as specified and as directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls including GI stack clamp out of 30mm by 4mm flat iron and 12mm dia round stays bolts and nuts and securing ends of stays

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls including GI stack clamp out of 30mm by 4mm flat iron and 12mm dia round stays, bolts and nuts and securing ends of stays

S&F 75 mm bore PVC (SWR) bends any radius

S&F 110 mm bore PVC (SWR) bends any radius

S&F 100mm bore pipe PVC (SWR) vent cowls, complete all as specified.

S&F 75mm bore pipe PVC (SWR) vent cowls, complete all as specified.

M&L in repairs PVC (SWR) floor trap plain with SS grating including jointing with solvent cement 75mm dia of outlet.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

HARNAM SINGH ANIL SINGH (BID ID -3327143)

MS SHUBHAM SANTOSH JAIN (BID ID -3327597)

M/s Dinesh Kumar (BID ID -3327995)

M/s Indu Enterprises (BID ID -3325893)

M/S SACHENDRA KUMAR JAIN (BID ID -3326095)

RAHUL ASSOCIATES (BID ID -3327131)

M/S A.R BUILDERS (BID ID -3328047)