Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.4 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | L2₹20.7 L+₹24,845.32 (1.22%)Rejected-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹20.9 L+₹49,283.45 (2.41%)Rejected-Finance 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹21.2 L
EMD Value
₹42,400
Closing Date
14 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AF STATION AMRITSAR
ASST. GARRISON ENGINEER (I) AIR FORCE STATION AMRITSAR-143001
PROVN OF ADDN ALTN TO SNCOS AIRMEN MESS AND SINGLE LIVING ACCN FOR SNCOS AND AIRMEN OF 41 WEU A KHASA UNDER AGE I AF AMRITSAR
2023_MES_619186_1
AGE (I) AF/ASR/T-20/2023-2024
Open Tender
Civil Works
Item Rate
210 days
AGE (I) AF STATION AMRITSAR
CLASS E AND CATEGORY a(i) and b (i)
8 documents required · 8 mandatory
₹500
Yes
AGE (I) AF AMRITSAR
₹42,400
Yes
9 Nov 2023
16 Sept 2023
21 Oct 2023
16 Sept 2023
14 Oct 2023
30 Sept 2023
Amount
Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
M & L for coloured non skid/matt finish ceramic tiles, 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding 0.11 sq.m but not exceeding 0.18 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.
Ditto all as per item No 2 above but as in dado, riser & skirting over & incl 10mm thick rendering in CM 1:3
Demolition of brick work built in cement mortar including all quoins,arches pillars etc all as specified and directed by Engr-in-Ch.
M&L Brick work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius , built in CM 1:4
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4
M&L for Rendering 15mm thick in cement mortar 1:6 on brick or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L 15 mm thick cement plaster in cm 1:4 mixed with liquid water proofing compound @ of 2% as on other than fair face of brick or concrete surface finished surface even and fair all as specified and directed Note : Supply only water proofing liquid shall be measured and paid separately.
Supply only liquid water proofing compound to mixed with cement mortar etc complete all as directed.
M&L preparing old plastered surfaces on walls two coat of primer paint, stopping nails holes and applying two coat of oil bound distemper with 1 mm wall care putty all as speified
M&L preparing old plastered surfaces on Ceiling two coat of primer paint, stopping nails holes and applying two coat of oil bound distemper with 1 mm wall care putty all as speified
Material and labour for applying two coats of Acrylic weather coat emulsion paint on walls/ceiling/facias/ramp Surface etc in disruptive pattern having percentage of Six- colour as 29.04% of RGB Value (143, 152, 113), 22.48% of RGB Value (112,139,86), 14.98% of RGB value (123,137,126), 13.80% of RGB Value (84,97,75), 14.15% of RGB Value (123, 137, 94) and 5.55% of RGB Value (206,193,141) as per sample approved by AGE(I) for building of height upto 7.5 meter, over and including a coat of alkali resistance primer complete all as specified and directed. Note:- The rate quoted by contractor is demmed to include preparation of surfaces and necessary scaffolding for painting upto required height.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each complete all as specified and directed.
Taking down chowkhat with shutters of size exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutters from the frame) all as specified and directed
S&F Presed steel frames for doors Size of frame 165 x 60 mm with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete as specified supplied and fixed.
S&F 30 mm thick Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides
S & F 25 mm thick first class softwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specifica-tion & drawing
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & draw-ing.
M&L and fabrication of mild steel work as in posts,purlins,crane gantires, rafter ,rails,wind tie nut & bolt etc and fasteningsetc and heavy brackets framing (MS tube, beam,tee,angle,channels,flat section etc and other sections) including distance pieces,cleats etc Fe-290 (Gde E165) complete all as specified and directed .
S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
Anodised aluminium snap grid frame work for false ceiling all as specified and directed by EIC.
Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
M&L for 6-8 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified. Make : (i) Aluminum section : VALCO, HINDALCO, JINDAL (ii) Gypsum board :- GYPSUM INDAI Ltd/LA GYP ECO Board.
S & F 5 mm thick solid pvc wall lining costing of plain colour pvc sheetinclusive of solvant cement and fixing at site on pvc frame as per specifications and drawing fromed by sticking high density eps (ter grade) heavy duty with tipper strip weather proof water proof termite proof anf retardent complete all as specified and directed.
S&F stainless steel butt hinges of size 100mm complete all as specified and directed.
S&F, extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.
S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed
M&L for PCC 1:3:6 Type C-1 Cement concrete in foundations, filling and mass concrete all as specified and directed by EIC.
S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all a specified
S&F 250 mm Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all a specified
S&F 140 mm Floor door stoper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all a specified
S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed,complete all a specified
S&F Factory made steel window/ventilator box type, primer coated , comprising made out of ERW Hollow 'P' section of size 6mm x 25mm of wall thickness frame 1.25mm single rebated frame and comprising glazed and skelton shutter made of ERW sec 50mmx20mm with 1mm thick wall thickness and operated leaf side top hung divided in three panel by flat iron suitable size complete welded to frame of shutter and openable shutter prepared to receive wire gauze including provision of flat iron riveted bolt to secure wire mesh, complete including cuttisng holes four nos for each window for hold fast and PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in hold fast size of PCC 150x230x75mm (04 Nos in each window) including necesssary form work complete and including following fittings welded to frame/shutter :-
(a) Hold fast 150mm long 25mm x 6mm iron made to shape - 04 Nos in each window (02 Nos each side).
(b) Handle of 'Z' section 20mmx25mm, 100mm stopper - 01 No in each leaf
(c) MS tower bold 150mm long - 02 Nos in each leaf.
(d) Cleat 55mm long of hollow square 15x15x24mm welded to hingesgauze wall thickness welded to hings of 50mm size - 01 No per leaf.
(e) MS Box type hinges of size 75x12mm - 03 Nos per leaf.
(f) Fabrication & Fixing complete.
NOTE :- (i) Glass panes and painting shall be measured & paid separately under respective items.
(ii) Design shall be got approved from the Engineer-in-Charge as per Drg No CEAF/STD-170/07 Sheet 1/4 to 4/4 before fabrication and bulk order to the manufacturer.
S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F toughened glass 5-6 mm thick of superior quality and glazing fixed with silicon beading with necessary fixing arrangement of each pane size as directed by Engineer in charge for Almuniam frames fixed with beads, punching or drilling etc all as specified and directed
S&F 25mm thick Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides
M & L Reinforced cement concrete (nominal mix) type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, eams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like
M & L TMT bars 10 mm dia and over , cutr to length , bent to shape required , including cranking , benidng spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirmin to
M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick
M&L for two coat synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed
M&L for two coat synthetic enamel paint over a coat pink primer on old wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed
500 Litres capacity rotational moulded polyethylene water storage tanks ISI marked three layers construction (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old tank completed all as specified and directed.
15 mm bore Gun metal, globe or gate valve,with iron wheel head, screwed both ends for iron pipes fixed in repairs complete as specified and directed
Taking up and down steel tubing and connections 15 mm bore complete all as specified and directed
M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed
S&F Vitreous china squatting pan, Orissa Pattern size 580mm x 440 white incl connection to pors trap with integral foot rest but excluding flushing cistern and flush pipe including placing in position and embedded lean/lime concrete bedding, fixed in repairs
S&F in repair, 10 Litre capacity PVC valveless, syphonic action type,flushing cistern low level ,white, with inlet,ball valve, float ,flush pipe and handle including brackets and PVC connection 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed.
S & F cast copper alloy, chromium plated shower rose with swivel joints of size 75 mm fancy type with CP neck 9" long made to shape ,IN REPAIR ,complete all as specified and directed by Engr-in-ch
S& F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
32 mm dia PVC flexible pipe of suitable length for wash hand basin or urinal fixed in repairs complete all as specified and directed.
Grating doom CP 100 mm dia ( minimum weight 25 gms) fixed in repairs complete all as specified and directed.
S&F 15 mm bore stop valves/ angle valves fancy type chromium plated screwed dwon high pressure with cruth or butterfly handle for 15 mm dia iron pipe fixed in repairs complete all as directed.
S&F in repair bib cock, long body,cast copper alloy chromium plated fancy type15mm bore with capstan handle,screwed down,screwed from iron pipe or for brass ferrule, complete all as specified and as directed.
Vitreous china wash basin white flat back 550 x 400 mm , with fitting of PTMT waste coupling suitable size ,PVC waste pipe ,angle iron brackets with painting of brackets etc fixed in repairs complete all as specified and directed.
S & F in repairs CP mixer pillar tap fancy type, screwed down high pressure, with or without lettered ‘hot’ & ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.
S&F in repair bevelled edge mirror of superior quality glass, mounted on 6-8mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including removal of old mirror complete all as specified and directed by EIC.
M&L two coats of synthetic enamel painting on new steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces all as specified and directed by EIC.
Roughing/ brushing the surface of old concrete/cement floor picking sweeping clean and washing down with water to remove dust/mud etc Supply and Application of 3 Layer SHR Waterproofing Coating System on non-leaking concrete surface by thorough surface preparation followed by one absorption coat of Thermacool WP 51, nano-tech modified, UV resistant elastomeric clear coat having min. 50% solids, then overcoating with 2 Coats of Thermacool 0.3C pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) Solar IR Heat Reflective coating conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 sqm/Ltr/2 coat, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable incl M&L Screed bed or bedding layer of mortar over brick tile 15 mm thick screed bed in cm 1:4 for laying floor finishes complete as per manufacture's instruction complete all as specified and directed by Engr-in-charge (Note:-The work should be executed through the auth applicator after approval from Engg-in-charge)
S & F Plain, galvanised, mild steel sheeting 0.63 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M & L TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M& L for Reinforced cement concrete nominal mix type B-1 using 20 mm graded aggregate in Beams, cantilevers, bressummers,lintels over 1.5m span
Excavating in post holes( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watring, and removing surplus soil to a distance n.exc 50 m and making good surface
Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Hard / Dense soil complete all as specified and as directed.
Returning,filling in trenches including spreading watering and well ramming in layers not exc 25cm thick in soft.loose soil complete all as specified and as directed .
Removing excavated materials to a distance not exc 50m and depositing where directed by EIC at a levlel not exc 1.5 m above the starting point.
Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed.
Material and labour in repair for Point wiring for One light point, controlled by one switch 5 Amp one-way complete with 1.5 Sq mm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLS cable (ISI marked) drawn into and including PVC concealed conduit (medium quality) and conduit fittings including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as earth wire to common earth and connecting to earth dolly including MS sunken box covered with 3mm thick bakelite laminated sheet top cover and machine made brass screw and washers etc complete all as specified and directed:-
(a) For one light/fan/bell point controlled by one 6 Amp one way switch.
(b) All as per item No. 2 hereinbefore but wiring for one 3 pin 6 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed.
(c) All as per item No. 2 hereinbefore but wiring for one 3 pin socket outlet 6 amps independent board.
All as per item No 2 hereinbefore but with 2.5 Sqmm size cable multy stranded FRLS copper wire unsheathed for one 3 pin socket outlet 16 Amp on independent board including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable connecting to comman earth as duly completed all as specified and directed by Engineer-in-charge(Note : Sunken boxes, frame, plate is included in the quoted rate)
S & F of in repair switch piano flush type single pole one-way 6 Ampere complete all as specified and directed.
S & F in repair of switch piano flush type single pole one-way 16 Ampere complete all as specified and directed.
S & F in repair of 6 Ampere socket outlet flush type, multi purpose suitable for 2 and 3 pins (Total 5 Pins) complete all as specified and directed.
S & F in repair of socket outlet two-in-one, 3 pin each suitable for 6 and 16 Ampere flush type with shuttered complete all as specified and directed.
S & F in repair of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed.
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and dircted.
S&F in repair of lamp holder PVC / polycorbonate type insulated body with back plate suitable for batten fitting / angle fitting complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20Watt, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeas per specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver,holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. complete all as per specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection including suitable sie of bracket complete all as specified and directed .
M&L for sub main wiring two single core 6 Sqmm(nominal area) multi-strand copper conductor FRLS PVC insulated and unseathed cable drawn in and including non metalic PVC regid conduit medium grade of suitable size with all standerd fittings, concealed including one run of continous PVC insulated stranded copper conductor FRLS cable 6 Sqmm for earth continuty, including taking out and removal of old sub main wiring, complete all as specified and directed. Note:- Rate quoted shall be deemed to include cutting chases for concealed conduit and making good incement mortar(1:4) or PCC (1:2:4)
M&L for sub main wiring two single core 4 Sqmm(nominal area) multi-strand copper conductor FRLS PVC insulated and unseathed cable drawn in and including non metalic PVC regid conduit medium grade of suitable size with all standerd fittings, concealed including one run of continous PVC insulated stranded copper conductor FRLS cable 4 Sqmm for earth continuty, including taking out and removal of old sub main wiring, complete all as specified and directed. Note:- Rate quoted shall be deemed to include cutting chases for concealed conduit and making good incement mortar(1:4) or PCC (1:2:4)
S & F in repair sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 ways including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and as directed including necessary brick work and plaster to match with the existing surface complete all as specified and directed.
S & F in repair MCB DP, 240 Volts, B curve, 10 KA, 40 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed
S & F in repair MCB single pole, 240 Volts, B curve, 10 KA, 6 to 32 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed
Supply and fix sheet metal encloser single pole and meutral , with two pin and earth plug and socket complete with one single pole MCB 20 Amp. Make :- C & S, L & T, Havells.
Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade GI pipe,funnel,wire mesh.concrete 1:3:6 type C-1 for pit and RCC pit cover. PCC pit shall be provided 50 cm away from earth pit and not on the earth pit itself. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate.Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm. The desired value of earth resistance should be less than 3 Ohm, if not found below 3 Ohm the complete earthing will be redone without extra cost of the govt. Complete all as specified and directed by Engr-in-Charge.
Supply , laying jointing and commissioning, LT under gound cables XLPE insulated screened PVC bedded galvanized steel strip armoured electric powder cable (heavy duty) with alumininum conductor cross sectional are 16 Sqmm 4 core LT, 1100 volts grade , laid in trenches , along poles or passing with through pipe or laid under floor or through/ on walls etc, including taking out old cable with protection bricks and removal, complete all as specified and directed Note:- Excavation and earth work , sand cushioning, brick protection and GI pipes for protection shall be measured and paid for separtely.
Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep for laying of cables and foundation of poles etc. and getting out complete all as spceified and directed.
Returning, filling in trenches (soil) including spreading leveling and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removal of surplus excavation soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
M&L sand cushioning with a layer of dry river sand 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts. Complete all as specified and directed Note: Punned down thickness (overall 18cm), shall be considered for measurement and payment.
M&L, locally available , sub class 'B' bricks (old size) laid flat and dry in trenches over the cable for protectionprependicular to the direction of cable adjacent to each other complete all as specified and directed.
M&L, GI pipe light grade 40mm dia bore for cable protection fixed to pole or under road/ pavement, complete including MS clamps, nuts, bolts etc all as specified and directed.
M & L for vertical type sheet steel enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar of suitable size and PVC insulated copper suitable for MCCB to the out going circuits (one incoming MCCB and 12 outgoing MCBs circuits) comprising of 3 phase 4 wire of suitable rating complete all as specified and directed.
Supply and fix in repair, MCCB, 04 pole, 100Amps, 415 volts, 25 KA, 50Hz (as per sample required on ground), with adjustable thermal and magnetic release, complete with extension links and making connection in panel board, complete all as specified and directed.
Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.
kapoor and co
M/s Vijay Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .