KED/63 of 2024-25 Dated 05.08.2024 for Providing 3 Phase 4 Wire Electricity connection to the newly constructed Plastic Management Unit in respect of Sub Division Kathua, Ramkot and Billawar of Electric Division Kathua on Turnkey Basis.

Amount

Creation of 100KVA Sub Station for providing of non functional Plastic Waste Management Unit Kathua in respect of JPDCL Electric Sub Division Kathua of Electric Division Kathua on Turnkey Basis (Location shall be identified by the Sub Division)

100KVA, 11/0.433-0.250KV;50Hz, AI wound Distribution Transformer of latest Energy Efficiency Level-2 (new), ISI 180 Part-I, 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4mtrs, suitable cable of ratings (Aluminium Wound upto 200KVA, Copper Wound for 250KVA or Higher KVA ratings).

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11KV Horn Gap Fuse Set 3 Phase 200A

185mm² (2 Ckt) Cable,1.1KV Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole(PCC WL-300Kg))

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedege connectors /PG clamps

Danger plate with clamps

GI Barbed wire for anti climbing

3 Ph 4 Wire Trivector meter with CT

Cement bottoming 1:2:4 mix as per REC standards .5 Cum/pole

Sundary items like Aluminium Lugs, Jumpers, binding tape

Erection of HT line on 9 Mtrs. PCC poles with ACSR Weasel Conductor for providing of non functional Plastic Waste Management Unit Kathua in respect of JPDCL Electric Sub Division Kathua of Electric Division Kathua on Turnkey Basis (Location shall be identified by the Sub Division)

9 Mtr. Long Pole(PCC WL-300Kg))

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel x-arm includingclaps and braces

30 mm² ACSR Weasel Conductor

PG Clamps for ACSR weasel conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Earthing complete by GI Pipe 40mm dia or GI Rod 20mm, 2.5Mtrs long through GI Strip

Stone Pad (300mm x 300mm x 75mm)

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Erection of LT line on 8 Mtrs. PCC poles with ACSR Weasel Conductor 47Mtr span on 3Phase 4 wire for providing of non functional Plastic Waste Management Unit Kathua in respect of JPDCL Electric Sub Division Kathua of Electric Division Kathua on Turnkey Basis (Location shall be identified by the Sub Division)

8 Mtr. Long pole (WL-3200KG)

GI U-Clamp for Shackle insulators

Shackle insulator 16 KN

30 mm² ACSR Weasel Conductor

Galvanized Nuts and Bolts

Danger plates with clamps

Anti Climbing Device with Clamps

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Stone Pad (300mm x 300mm x 75mm)

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Creation of 100KVA Sub Station for providing of non functional Plastic Waste Management Unit Mandli in respect of JPDCL Electric Sub Division Ramkot of Electric Division Kathua on Turnkey Basis (Location shall be identified by the Sub Division)

100 KVA, 11/0.433-0.250KV; 50HZ AI wound distribution transformer of latest energy efficiency level-2 (new), ISI 180 part-I, 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4mtrs, suitable cable of ratings (Aluminium Wound upto 200KVA, Copper wound for 250KVA or Higher KVA ratings)

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

185 mm² (2Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole(ST 410 SP33)

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedege connectors /PG clamps

Danger plate with clamps

GI Barbed wire for anti climbing

3 Ph 4 Wire Trivector meter with CT

Cement bottoming 1:2:4 mix as per REC standards .5 Cum/pole

Painting of poles Red Oxide

Painting of poles Aluminum Paint

Sundary items like Aluminium Lugs, Jumpers, binding tape

Erection of HT line on 9 Mtrs. ST Poles with ACSR Weasel Conductor for providing of non functional Plastic Waste Management Unit Mandli in respect of JPDCL Electric Sub Division Ramkot of Electric Division Kathua on Turnkey Basis (Location shall be identified by the Sub Division)

9 Mtr. Long Pole(ST-410 SP33)

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel x-arm includingclaps and braces

30 mm² ACSR Weasel Conductor

PG Clamps for ACSR weasel conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Red oxide paint

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standard 0.5 CUM per pole

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Erection of LT line on 8 Mtrs. ST Poles with ACSR Weasel Conductor on 3Phase 4 wire for providing of non functional Plastic Waste Management Unit Mandli in respect of JPDCL Electric Sub Division Ramkot of Electric Division Kathua on Turnkey Basis (Location shall be identified by the Sub Division)

8 Mtr. Long pole (ST 410 SP15)

GI U-Clamp for Shackle insulators

Shackle insulator 16 KN

30 mm² ACSR Weasel Conductor

Galvanized Nuts and Bolts

Danger plates with clamps

Anti Climbing Device with Clamps

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxide paint

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standard 0.5 CUM per pole

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Aluminium Jointing Sleeves

Creation of 100KVA Sub Station for providing of non functional Plastic Waste Management Unit Billawar in respect of JPDCL Electric Sub Division Billawar of Electric Division Kathua on Turnkey Basis (Location shall be identified by the Sub Division)

100 KVA, 11/0.433-0.250KV; 50HZ AI wound distribution transformer of latest energy efficiency level-2 (new), ISI 180 part-I, 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4mtrs, suitable cable of ratings (Aluminium Wound upto 200KVA, Copper wound for 250KVA or Higher KVA ratings)

Gapless Surge Arrestor,9 kV ,10 KA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

185 mm² (2Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole(ST 410 SP33)

11KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedege connectors /PG clamps

Danger plate with clamps

GI Barbed wire for anti climbing

3 Ph 4 Wire Trivector meter with CT

Cement bottoming 1:2:4 mix as per REC standards .5 Cum/pole

Painting of poles Red Oxide

Painting of poles Aluminum Paint

Sundary items like Aluminium Lugs, Jumpers, binding tape

Erection of HT line on 9 Mtrs. ST Poles with ACSR Weasel Conductor for providing of non functional Plastic Waste Management Unit Billawar in respect of JPDCL Electric Sub Division Billawar of Electric Division Kathua on Turnkey Basis (Location shall be identified by the Sub Division)

9 Mtr. Long Pole(ST-410 SP33)

GI V cross-arm/Horizontal with top Bracket including clamp

GI Channel x-arm includingclaps and braces

30 mm² ACSR Weasel Conductor

PG Clamps for ACSR weasel conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Danger Plates with Clamp

Anti Climbing Devices with clamps

Red oxide paint

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standard 0.5 CUM per pole

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Aluminium Jointing Sleeves

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Erection of LT line on 8 Mtrs. ST Poles with ACSR Weasel Conductor on 3Phase 4 wire for providing of non functional Plastic Waste Management Unit Billawar in respect of JPDCL Electric Sub Division Billawar of Electric Division Kathua on Turnkey Basis (Location shall be identified by the Sub Division)

8 Mtr. Long pole (ST 410 SP15)

GI U-Clamp for Shackle insulators

Shackle insulator 16 KN

30 mm² ACSR Weasel Conductor

Galvanized Nuts and Bolts

Danger plates with clamps

Anti Climbing Device with Clamps

Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip

Red oxide paint

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standard 0.5 CUM per pole

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Aluminium Jointing Sleeves

I.CON ELECTRICALS

COUNTRY CONSTRUCTION