Construction of Warehouse 2000 MT AND Machinery Shed

Amount

Warehouse

Trimming of grass, shrubs and weeds from theshoulder/berms and disposing off the same to suitable locations etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated mataerial up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation for foundation in Hard Murum including removing the excavated material upto a distance of 50 meters beyond the building area and stacking and spreading’s directed dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift up to 1.50 m.) By Mechanical

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond gthe building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap / granite / quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering. Formwork laying / pumping, compacting, roughening them if special finish is to be provided finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan Mixer) etc. complete. With fine aggregate (Natural Sand / crushed sand VSI grade finely washed etc.) SSR I. No. 24.01 P.No.175

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch Mix plant (Pan mixer) etc. Complete. With fine aggregate (Natural Sand / Crushed sand VSI grade finely washed etc.)

Providing and laying Cast in situ / ready mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C,. columns as per detailed designs and drawing or as directed including steel centering. Formwork, cover blocks, laying / pumping , compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type Mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With fine aggregate (Natural Sand/ Crushed Sand VSI Grade finely washed etc.)

Ground Floor

First Floor

Providing and laying Cast in situ / ready mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C,. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying / pumping, compactioneand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type Mixer / concrete Batch mix plant (pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed Sand VSI Grade finely washed etc

Ground Floor

First Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed disigns and drawings including steel centering. Formwork, cover blocks, laying / pumping , compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type Mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With fine aggregate (Natural Sand / Crushed Sand VSI Grade finely washed etc.)

Ground Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. pardi as per detailed disigns and drawings including steel centering. Formwork, cover blocks, laying / pumping , compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type Mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With fine aggregate (Natural Sand / Crushed Sand VSI Grade First Floor

Providing and fixing in position TMT – FE – 500 bar reinforcement of various diameters, for R.C.C. pile caps , footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc as per detailed designs, drawings and schedules. Including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Ground Floor

First Floor

Filling in plinth and floors with approved excavated materials in 15 cm. to 20 cm layers including watering and compaction etc. complete.

Filling in plinth and floors with contractors material / brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm. including watering and compaction etc.

Providing soling using 80 mm size trap metal in 15 cm. layer including filing voids with Crushed sand / grit, ramming, watering etc. complete.Spec No. As Directed by Engineer in charge,

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.Spec. No. : As director by engineer in charge

Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS : 2185 (Part 3) – 1984 in extra fine jointing mortar of fixoblock of ultra Tech or equivalent in superstructure including striking joints, raking out joints scaffolding etc. complete. (the test shall be carrid out conforming to IS.6441 (part I)-1972)

Ground Floor

First Floor

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35x35x5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket Plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. Sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. Ground Floor (I.S. 62481979) (with mechanical gear) Spec. No. As Directed by Engineer in Charge SSR I. No. 39.25 P. No. 181)

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg / sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.SSR I. No. 40.01 P. No. 264, Ground Floor

Providing and fixing chicken mesh of 22 guage, with about 30 cm. width at the junction of R.C.C. members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / B.B. masonry and or, tying by binding wire etc.SSR. I. No. 32.26 P.No. 210, Ground Floor

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete of brick surfaces, in all positions including scaffolding and curing etc. complete.

Ground Floor

First Floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less that 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and during for fourteen days scaffolding etc. complete.

Ground Floor

First Floor

Providing and laying machine cut machine polished kota stone flooring 25mm to 30mm thick and required width in plain / diamond pattern on bed of 1 :6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. Complete.

Providing and fixing in position powder coated aluminum louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminum frames 80 x38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Ground Floor

Providing & constructing Brick Masonry Inspection Chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. piper, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with R.C.C. Cover.,

Providing and applying plastic emulsion paint of approved quality, color and shade to old and news surface sin two coats including scaffolding, preparing the surface, (excluding the primer coat) etc. complete , Ground Floor

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved color to the plastered surfaces including cleaning , preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete., Ground Floor

STRUCTURAL STEEL E50 Supplying, fabricating, erecting and fixing in position of steel structure at all elevations using fusion welding quality steel E-350 (fe490) conforming to IS 2062-2006 Rates shall include cost of cutting. Welding, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position welded / bolted structural steel work in columns, beams, trusse, purlins, platforms, ladders monorails, staircase, supports , strengthening of steel member etc. at site to line and level supply of approved bolts / nuts/ washers etc complete drawings including painting as per G4/G5/G6 before erection and all materials a md lanour charges rte. Complete and including sand blasting & painting with 1 coat or enarncl

STRUCTURAL STEEL COLD FORMED LIGHT GAUGED supplying, fabricating. Erecting of cold formed light gauge structural steel members cobforming to IS 801 / IS 811 hot – dip galvanisede to Is 4759-96 including cutting, welding. Splice plates and packing plates, transporting. Straightening, cleaning, fabricating and erecting in position

SHEETING Supplying and fixing of PPGI 0.5 mm thick as shown in drawing or directed by Engineer with all necessary accessories (Essar) Make.

ROOF ACCESSORIES Supply and fixing of PPGI roof accessories of 0.5 MM Thick as shown in drawing or as directed by engineer incharge

ROOF GUITER Roof Gutter (assumed 600 mm) PPGL 0.5 mm Supplying, fabricating and erecting in position PPGI leaves guttar of required size with stop all fixing accessories drop and etc all elevations live as hedes including along living providing and fixing board not confirming to latest specification including cutting straightening welding welding to saves ITC complete as shown in drawing as per specification and as directed by engineer.

DOWN TAKE PIPE Providing and fixing of the rainwater down take piper of PPGI. The sectional area of rainwater down take shall be generally at the rate of 1 square cm per 70 to 80 square decimeter of roof area drainage the spot shall be less that 80 mm in diameter the spacing of spots shall be arranged to suit the position opening in the wall including necessary accessory for fixing the pipe and including all material labour charges etc complete as shown in drawing as per specification and as directed by the engineering in charge

Providing and fixing wind operated Turbo SS ventilator (24 inch Dia.) over existing roof including cutting of sheet proper fixing in position of true line and level with all pictures and fasting provided 80 mm thick sheet for covering area between roof and Fan so as to provide water proof joints with water proofing compound making the roof surface including cleaning etc as shown engineer in charge.

Supplying and fixing of 2 mm polycarbonate sheet as per drawing & as directed by engineer in charge

Royalty

Other Material

Royalty

Concrete Mix Design (With all Tests on basic materials)

Concrete Cube

Steel

Flooring – CERAMIC TILES / VITRIFIED TILES

Brick

Trimming of grass, shrubs and weeds from theshoulder/berms and disposing off the same to suitable locations etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated mataerial up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation for foundation in Hard Murum including removing the excavated material upto a distance of 50 meters beyond the building area and stacking and spreading’s directed dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift up to 1.50 m.) By Mechanical means

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap / granite / quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering. Formwork laying / pumping, compacting, roughening them if special finish is to be provided finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan Mixer) etc. complete. With fine aggregate (Natural Sand / crushed sand VSI grade finely washed etc.) SSR I. No. 24.01 P.No.175

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch Mix plant (Pan mixer) etc. Complete. With fine aggregate (Natural Sand / Crushed sand VSI grade finely washed etc.)

Providing and laying Cast in situ / ready mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C,. columns as per detailed designs and drawing or as directed including steel centering. Formwork, cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type Mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With fine aggregate (Natural Sand/ Crushed Sand VSI Grade finely washed etc.)

Ground Floor

First Floor

Providing and laying Cast in situ / ready mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C,. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying / pumping, compactioned roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type Mixer / concrete Batch mix plant (pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed Sand VSI Grade finely washed etc)ground floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering. Formwork, cover blocks, laying / pumping , compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type Mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With fine aggregate (Natural Sand / Crushed Sand VSI Grade finely washed etc.) Ground Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite / quartzite/ gneiss metal for R.C.C. pardi as per detailed designs and drawings including steel centering. Formwork, cover blocks, laying / pumping , compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type Mixer / concrete Batch mix plant (Pan Mixer) etc. complete. With fine aggregate (Natural Sand / Crushed Sand VSI Grade finely washed etc.) First Floor

Providing and fixing in position TMT – FE – 500 bar reinforcement of various diameters, for R.C.C. pile caps , footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc as per detailed designs, drawings and schedules. Including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete., Ground Floor

Filling in plinth and floors with approved excavated materials in 15 cm. to 20 cm layers including watering and compaction etc. complete.

Filling in plinth and floors with contractors material / brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm. including watering and compaction etc.

Providing soling using 80 mm size trap metal in 15 cm. layer including filing voids with Crushed sand / grit, ramming, watering etc. complete.

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.

Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS : 2185 (Part 3) – 1984 in extra fine jointing mortar of fixoblock of ultra Tech or equivalent in superstructure including striking joints, raking out joints scaffolding etc. complete. (the test shall be carried out conforming to IS.6441 (part I)-1972) Ground Floor

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35x35x5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket Plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. Sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (with mechanical gear) Ground Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg / sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Ground Floor

Providing and fixing chicken mesh of 22 guage, with about 30 cm. width at the junction of R.C.C. members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / B.B. masonry and or, tying by binding wire etc.Ground Floor

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete of brick surfaces, in all positions including scaffolding and curing etc. complete.Ground Floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less that 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and during for fourteen days scaffolding etc. complete.Ground Floor

Providing and laying machine cut machine polished kota stone flooring 25mm to 30mm thick and required width in plain / diamond pattern on bed of 1 :6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. Complete.Ground Floor

Providing and fixing in position powder coated aluminum louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminum frames 80 x38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Ground Floor

Providing and fixing P.V.C. Rain water Piper of 110 mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592 – 1992 including proper rainwater receiving recess with P.V.C. Plug , bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25mm to 40 mm from face of wall a fixing with clips of approved quality and number, fining the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. (the contractor shall give 3 yrs guarantee bond for payment)

Providing & constructing Brick Masonry Inspection Chamber 60 cm x 45 cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. piper, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with R.C.C. Cover.

Providing and applying plastic emulsion paint of approved quality, color and shade to old and news surface sin two coats including scaffolding, preparing the surface, (excluding the primer coat) etc. complete Ground Floor

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved color to the plastered surfaces including cleaning , preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. Ground Floor

Providing and fixing colour coated Zincalume (r) AZ150 (Min 150 gms/sq.mt.total one each side) profied sheets for roofing. The feed materials manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), HI – strength steel with min. 550 M playfields strength, metal lichot dip coated with Aluminum- Zincalloy (55% aluminum 4.4 % Zinc 1.6 % silicon) with COLORBOND (R) steel quality super durabie polyester paint coat (within organic pigment). The paint shall have at otal coating thickness of nominal 35 um, comprising of nominal 25 umexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom 950-1050 mm effective cover width and nominal 25-30 mm deep rib swath sub esquire efiutingin the five panat nominal 180-250 mm center – to – center. The endrib shall be designed for anti – capillary groove. And return leg. The feed materials houldhave coil manufactures product details marked regular in terval. Including fasteners with min fastened with min 25 um zinc – Tinallov

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hosting , erecting , fixing in position making riveted / bolted /welded connections and painting complete.

Exavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required

Conveying materials obtained from road cutting including all

Supplying hard murum / kankar at the road site including conveying and stacking complete.

Spreading hard murum for side width etc. complete

Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.

Providing, laying , spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and a booming requisite type of screening / binding materials to fill up the interstices of coarse aggreagate, watering and compacting with Intelligent compactor with compaction analyzer and V-sat attachment. To be required density. Grading I (Using Screening Type B (11.2mm) Aggregate)

Providing, laying spreading and compacting stone aggragates of specific sizes to water bound macadam specification including spreading in uniform thickness hand packing to proper grade and camber, applying and booming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering and compacting with intelligent Compactor with compaction and V-Sat attachment. To the required density. Grading II (Using Screening Type B (11.2 mm) Aggregate)

Providing and laying Cast in situ / ready Mix cement concrete in M-10 of Trap / granite/ quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum

Providing and laying Cast in situ / ready Mix M – 20 cement concrete of Trap / granite/ quartzite / gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer / concrete batch mix plant (pan Mixer) with SCADA with fine agreega tes of required specifications (naturals Sand / VSI sand finely washed etc) cement 6.40 bags / cumt.)

PVC Conduit Supplying & erecting H.M.S. P.V.C. conduit 20 mm. dia, with necessary accessories in wall / floor with chiseling appropriately as per specification No. WG-MA/CC

PVC Conduit Supplying & laying HMS PVC Conduit 20 mm dia, with necessary accessories in RCC work / false ceiling / false flooring as per specification No.WG – MA/CC.

Fleexible Conduit 20 mm Supplying and erecting UPVC reinforced flexible conduit 20 mm in dia. Conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. .

PVC Trunking 25 mm Supplying and erecting PVC trunking (PVC casing – n – capping of size 25 mm with accessories on wall / ceiling as per specification No. WG-MA/CON)

PVC Trunking 32 mm Supplying and erecting PVC trunking (PVC casing – n – capping ) of size 25 mm with accessories on wall / ceiling as per specification No. WG-MA/CON.

Mains 1x1.5 sq.mm. Supplying & erecting mains with 2x1.5 sq.mm F.R. copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No.WG-MA/BW

Mains 2x1.5 sq.mm. Supplying & erecting mains with 2x1.5 sq.mm. F.R. copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No.WG-MA/BW

Mains 2x2.5 sq.mm. Supplying & erecting mains with 1x2.5 sq.mm. F.R. copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No.WG-MA/BW

Mains 2x2.5 sq.mm. Supplying & erecting mains with 2x2.5 sq.mm. F.R. copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No.WG-MA/BW

Bunch of wire 2x4. Sq.mm. Supplying & erecting mains with 2x4 sq.mm. F.R. copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No.WG-MA/BW

Bunch of wire 4x10 Sq.mm. Supplying & erecting mains with 2x10 sq.mm. F.R. copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No.WG-MA/BW

Modular Switch 6 A Supplying & erecting ISI mark modular type switch 6A/ 10 A duly erected on provided plate and box with wiring connections complete.

Modular Switch Supplying & erecting ISI mark modular type switch 16 A duly erected on provided plate and box with wiring connections complete.

Modular Socket Supplying & erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter duly erected on provided plate and box with wiring connections complete.

Modular Switch Supplying & erecting ISI mark modular type 3 pin 6A/16A multi sockets with safety shutter duly erected on provided plate and box with wiring connections complete.

Modular Step Regulator Supplying & erecting ISI mark modular type (Two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connection complete. Note – Add rs 57/- for additional two module box with double mounting plate if required.

Concealed Box Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiseling and finishing with cement morter / POP as per required to match the background.

Modular Box 12 way Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiseling

Modular Box 16/18 way Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16/18 module duly erected flush to wall with required chiseling and finishing with cement mortar / POP as per required to

Plug Point Wiring for plug on board with Switch socket concealed type, copper wiring and earthing and with modular accessories as per specification No. WG-PW/CW

Light / Bell / fan Point wiring for light / fan / bell hybrid type (surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq. mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification NO. WG-PW/HW

Fan point Point wiring in PVC trunking (casmg capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch earthing and required accessories as per specification No.WG-PW/SW

LED Panel light Supplying and erecting CRCA / die – cast aluminium powder coated housing LED panel light (slim edge – lit square / round shape suitable for 19 to 24 W with provision for plane front frame with translucent cover fixed to the housing complete.)

LED Panel Light Supplying and erecting CRCA / die – cast aluminium powder coated housing LED panel light (slim edge – lit square / round shape suitable for 25 to 32 W with provision for plane front frame with translucent cover fixed to the housing complete.)

LED Panel Light Supplying and erecting CRCA / die – cast aluminium powder coated housing LED panel light (slim edge – lit square / round shape suitable for 36 to 40 W with provision for plane front frame with translucent cover fixed to the housing complete.)

Supplying and erecting LED flexible strip light 5m length upto 75 W conforming IP 65 of any colour with driver complete.

Recess Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20 W

LED Tube Supplying & erecting LED 20 w tube light fitting (4feet) with aluminium housing, heat, sink integrated HF electronic dricer complete.

Bulkhead Fitting Supplying and erecting bulkhead fitting suitable for upto LED Upto 12 w fixed on wall. As per specification no. FG-IDF/BHF

Ding Dong Bell Supplying and erecting ding dong / electronic cusical type call bell with heavy duty coil suitable to operate on 230 V A.C. supply erectaed on polished double wooden block / sunmica block of suitable size

LED Street Light fitting Supplying and erecting LED street light fitting 150 W including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

Wall Bracket Supplying and erecting street light wall bracket made from 40 mm dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

LEDd Flood light Supplying and erecting LED flood light fitting of 70-80W including lamp, with PF> 0.95, class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

LED Flood Light Supplying and erecting LED flood light fitting of 150 W including lamp, with PF> 0.95, class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

LED Lamp Supplying and erecting 5w-7w, 230V integral type LED Lamp suitable for B-22/E-27 base.

Ceiling Fan Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm compete erected in position as per specification NO. FR-FN/CF

Exhaust Fan Supplying and erecting exhaust fan medium duty 230V A.C. 50 cycles 225 mm. 14010 RPM with condenser complete erected in position with necessary materials, fan motor with moisture proof treatment and ‘E’ class insulation.

Anchor Fan Fastener Supplying & fixing anchor type fastener fan hook, ith 2 Nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan.

Fan Clamp Supplying and erecting fan clamp of 30 x 5 mm. M.S. Flat of required length and 10 mm. M.S. bolt and nuts erected of required length and 10 mm . M.S. round bar and paindted.

Down Rod Supplying and erecting ‘B’ grade G.I. pipe / M.S. Pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Recess Providing recess in brick wall suitable for erection of exhaust fan up to 450 mm . sweep complete with grouting of nut, bolts, plastering and colour washing wo match the colour of the wall for the wall thickness of 225 mm.

Metal Cawl Supplying and erecting 22SWG G.I. metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 400 mm as per specification no FG-FAS/MSC

SPMCB Supplying , erecting & marking SPMCB 6 A to 32A, B-series (for motor / power ) in provided distribution board as per specification no. SW-SWR/MCB

SPMCB Supplying , erecting & marking SPMCB 6 A to 32A, B-series (for motor / lighting) in provided distribution board as per

MCB TP Supplying, erecting & making TPMCB 40 A to 63 A in Provided distribution board as per specification no. SW-SWR/MCB

FPMCB Supplying and erecting & marking FPMCB 40 A to 63 A in provided distribution board as per specification no. SW-SWR/MCB

TPNDB Supplying and erecting triple pole and neutral distribution board (TPNDB) With door surface / flush mounted SPMCB of 12 ways, on iron / GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

VTPN MCB Supplying and erecting triple pole and neutral distribution board (TPNDB) With door surface / flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles) on iron / Gi frame. (vertical busbar type) as per specificition

VTPN MCB Providing & erecting 3 pole MCCb of 600/630 A, 415 V capacity with short circuit rating 36 KA (ICS = 100% OF Icu,) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for instattation of shunt /UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification

PVC. ARM Cable 4x16 sq.mm. Supplying, erecting & terminating Xple armoured cable 4 core 16 sq.mm. aluminum conductor with continuous 5.48 sq. mm. (12. SWG) G.I.earth wire complete erected with glands & lugs, on wall/ trusses / pole or laid in provided trench / pipe as per specification no.

Cable 4 core 50sq. mm. Supplying, erecting & terminating XPLE armoured cable 4 core 50 sq. mm. aluminium conductor with continuous 5.48 sq.mm. (12 SWG) G.I. earth wire complete erected

G.I. Pipe Supplying * erecting G.I. Pipe ‘A’ class 50 mm dia. Erected for enclosing XLPE armoured cable on wall / pole as per specification

Plate Earthing Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification

Trench Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification

Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct

ANIL BHIMASHANKR HASBE

M/s. Sib(India) constructions