80891 ADDN ALTERATION TO BUILDING NO P 165 FOR PROVISION OF RESPIRATORY ISOLATION WARD AT FIRST FLOOR IN THE COMPLEX OF INHS DHANWANTRI PORT BLAIR

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out hard dense soil

Excavating in trenches, exceeding 1.5 m wide and not exceeding 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out hard dense soil

Material and labour for Cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete

Material and labour TMT steel bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips

Material and labour Mild steel TMT bars 5mm dia & over up to & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams, and similar work for rough finished flat surfaces.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions and similar work for rough finished flat surfaces.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.for rough finished flat surfaces.

Material and labour RCC M30 grade (Design Mix) using 20mm graded stone aggregate as in foundation including footing plinth beam, base for column, etc complete.

Material and labour RCC M30 grade (Design Mix) using 20mm graded stone aggregate as in columns pillars, posts, struts, piers,

Material and labour RCC M30 grade (Design Mix) using 20mm graded stone aggregate as in lintel, beams etc. over 1.50m span

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for.

Supply and fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam,tee,angle,Channel or flat sections) including distance pieces, cleats etc.of grade Fe 410-w grade E-250 quality A

Supply and fix Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.

Supply and fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A.

Supply and fix aluminium flat 25 X 6mm size as wind tie fixed with 50mm/75mm aluminium self tapping screws.

Material and labour for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Demolition of cement concrete in floors and pavings not exceeding 15 cm thickness (above or below GL)

Material and labour for PCC 1:2:4, Type B-0, using 12.5mm graded stone aggregate as in Sub base for flooring/levelling coarse etc complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4)

Material and labour for glazed ceramic tiles 450x300x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) all as specified and directed

Material and labour for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed of 15mm thick in CM 1:4 all as specified and as directed.

Demolition of Precast Concrete work/ precast concrete block built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

Material and labour precast cement concrete block masonry with solid block, exceeding 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified.

Material and labour for rendering to concrete or block masonry surfaces on fair faces 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

Supply only liquid water proofing compound.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and as directed

Material and labour for preparation of new plastered surface of walls and applying two coats of oil bound distemper paint over a coat of alkali resistant primer including application of 3mm thick wall care putty all as specified and directed.

Material and labour for anodised aluminium snap grid of size 605mm x 605mm for false ceiling including cutting, drilling, jointing etc suspended with 6mm dia G.I. hangers (up to 1200mm length) adjusting level fixed to slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including providing 4mm thick Non asbestos perforated fibre cement building boards and fixed to frame work with nails complete including applying two coats of oil bound distemper over a coat of primer on soffit of ceiling boards complete all as specified and as directed by engineer- in- charge.

Supply and fix Solid PVC Door frame of size 50mm x 47mm made out of 5mm rudraksh colour PVC sheet reinforced with MS square tube in opening as per specification & drawing.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing

Supply and fix Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Supply and fix Anodised Aluminium frames for Partition, Door, Windows ,sliding shutters and Ventilators with one or more rebates including jointing cleat for fixing etc and aluminium anodised skeleton windows & ventilator shutter fixed with glass or gauge, side hung type without sash bars using standard aluminium section including necessary Aluminium grill, jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc complete all as specified including aluminium grills fixed to window frame aluminium anodised wire cloth fixed to aluminium frame all as specified and directed NOTE: (i) Payment under this item will be make only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading and fixing of 5.5mm thick glass etc. (ii) Supply only 5.5mm thick sheet glass and aluminium wire cloth be measured and paid separately.

Supply only 4mm thick figured glass pin headed type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane

Supply only Sheet glass, 5.5mm thick toughened glass, in squares exceeding 0.5 sq. m each pane

Supply and fix in plywood, grade BWP, type BB 12 mm thick 7 No of ply, fixed as panels of Aluminium door shutters, pelmet box, partition etc complete.

Material and labour 0.9mm thick Decorative laminates type I surface finish, colour and pattern as approved including all necessary cutting to the size and pasting to the wood surface with and including approved synthetic adhesive as per manufacturer's instructions complete all as specified and as directed.

Supply only Aluminium anodised XPM 1.50mm x3.00mm size for mosquito proofing 22gauge thick complete all as specified and as directed.

Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 &plain CPVC SDR 11with all special fittings on walls /ceilings or laying in floors complete all as specified.

Supply and laying of CPVC pipes 25mm dia outer bore SDR 11 &plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified.

Supply and fixing 20 mm outer dia CPVC elbow with brass threads

Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 X 1/2)

Supply and fixing 20mm outer dia CPVC female adaptor with brass threads (FTA/FBTA)

Supply and fixing 25mm outer dia CPVC female adaptor with brass threads(FTA/FBTA)

Supply and fixing 20 mm outer dia CPVC Tee with Brass Threads

Supply and fixing 20mm outer dia tank adaptor

Supply and fixing 25 mm outer dia tank adaptor

Supply and fixing 20mm outer dia union

Supply and fixing 25mm outer dia union

Supply and fix Rotational moulded polyethylene water storage tanks of 1000 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specified

Supply and fix in gun metal gate valves with iron wheel head screwed both ends for iron pipe of dia 25mm.

Supply and fix Ball brass valve high pressure of polyethylene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 25mm bore.

Material and labour Granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over 15mm thick screed in CM (1:6) all as directed by Engr in charge

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as directed by Engr in Charge.

Supply and fixing stainless steel friction stay hinges of standard size.

Supply and fixing standard aluminium window handles 125 mm long for Alu. windows/ ventilators

Supply and fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy

Supply and fix aluminium anodised barrel tower bolt of extruded section 150mm long.

Supply and fix extruded aluminium alloy handle fabricated type anodised 125mm long.

Supply and fix extruded aluminium alloy handle fabricated type anodised 150mm long.

Supply and fix steel butt hinges with ,bright polished 100 mm long ISI marked fixed with brass screws

Supply and fix Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

Supply and fix curtain Rod /Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc , 25 mm dia with fixing brackets, stops, rollers etc complete all as specified and as directed.

Supply and fix vitreous china counter top wash hand basin, white colour of size 550mm including fixing on granite slab 32 mm waste coupling brass chromium plated suitable for was hand basin with long screw shank and fly nuts & PVC waste pipe complete all as specified and as directed.

Supply and fix Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed.

Supply and fix in stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore, etc complete all as specified and as directed.

Supply and fix Angular cock 15 mm dia, cast copper alloy with capstan head, screwed down high pressure with long shank and cup fancy type for iron pipe etc complete all as specified and as directed.

Supply and fix Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

Supply and fix in brass chromium plated telescopic Hand shower(Health Faucet)(ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook all as specified

Supply and fix brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed.

Supply and fix Soap Dish, Vitreous China, White of approximate size 160 x 160 x 90 mm with screws complete all as specified and as directed.

Supply and fix 15mm Pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

Supply and fix in repairs Vitreous China wash down water closet pan of size 'p' trap or 'S' Trap (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connecting to drain pipe and flush pipe etc complete

Supply and fix in 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of Make Slimline or Cera or equivalent make complete all as specified and as directed.

Supply and fix Vitreous China urinals, half stall type ,white (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe

Supply and fix in repairs PVC flexible connection, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flush tank etc, all as specified.

Supply and fix 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down pipes complete all as specified and as directed.

Supply and fix in 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix 75mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.

Supply and fix 75 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.

Supply and fix 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

Supply and fix PVC (SWR) T bends with access door 75mm dia

Supply and fix 75mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.

Supply and fix in 75mm dia out let, PVC (SWR) Floor Trap with SS grating including jointing to waste pipe fixed in cement concrete 1:2:4, Type B-1 complete all as specified and as directed.

Supply and fix 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down

Supply and fix in 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed.

Supply and fix in 110 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed.

Supply and fix in 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

Supply and fix in PVC (SWR) T bends with access door 110mm dia

Supply and fix in PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement

Supply and fix in 110mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.

Material and labour Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard dense soil

Removing excavated soil not exceeding. 50m and depositing where directed at a level not exceeding. 1.5 m above the starting point

Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor drawn through and including non-metallic rigid PVC conduit PVC conduit fittings and conduit accessories concealed in walls, roofs and floors etc including metal flush boxes and hylem sheets for mounting switches and sockets concealed in walls, roof and socket / electronic fan regulator including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified for:-

(a) One light point controlled by one switch

(b) One Ceiling fan point controlled by one switch and one fan regulator

(c) One switch socket outlet 3 pin 5 Amps on independent board

(d) One switch socket outlet 3 pin 5 Amps on same board

(e) One Exhaust Fan point controlled by one Switch

(f) One two way point controlled by 2 two way switch.

All as per item No.98 above but with 4sqmm copper conductor cable with 4.0 sqmm PVC copper conductor cable as earth continuity conductor for one socket outlet 15/16 amps controlled by one switch 15/16 Amps on independent board all as directed.

Material and labour for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 1.5 sqmm including one runs of 1.5 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed.

Material and labour for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 4 runs of 10 sqmm including two runs of 10 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed.

Material and labour for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed.

Material and labour for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 4.0 sqmm including one run of 4.0 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed.

Supply and fix Wall mounted LED with LED Batten, extruded Aluminium heat sink provided for efficient heat dissipation & integrated electronic driver of Lamp type: 20W LED life time of 30000* hours including lamp all as specified and as directed. Make: CG, Cat Part No: BRIGHT LINEA CCS-100-20-65-HL2-DP-NWH or equivalent in PHILIPS/ Havells

Supply, installation, testing and commissioning of decorative LED 10W with LED batten in extruded aluminium housing with diffuser 3000K luminaries to directed light with 90lm/watt Lumens Equivalent to CG Cat Part No: TRIMLINE LDL-10-CDL or equivalent in PHILIPS/ Havells

Supply and fix energy efficient recessed / Ceiling mounted LED luminaries suitable for 2'x2' grid with profiled diffuser including lamp, electronic control driver ,36 watts (>100lm/watt),AC 230 Volts 50 Hz supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete all as directed .Make ;Polaris Nio-I CG Cat no LCTLRNE-36-FO-CDL or equivalent

Supply and fix Exhaust fan, 150 mm sweep, minimum 1300 RPM, AC, single phase, 240 volts, with louvers complete and connecting up from ceiling rose to fan by three core 1.5 sq mm copper wire of suitable capacity including suitable size MS bolts and nuts for fixing exhaust fan and louvers including making opening in brick walls/stone walls suitable for fixing exhaust fans and making good to the disturbed surfaces to match with the existing by applying PCC, putty, white washing/colouring complete all as specified and directed. Make of Exhaust Fan- Havells model no. Ventil Air DS, or Crompton Greaves, Alomnard, Usha.

Supply & Fix 1200 mm sweep ceiling fan of 5 star rating, energy saving model with double ball bearing 230 volts 3 blades white in colour without regulator COMPLETE WITH CANOPY, suitable DOWN ROD all as directed. Make: Havells, Type/ Model : ES-50 Premium 5 or equivalent in Usha/ CG

Supply and fix down rod 15 mm dia medium grade including cutting required length, drilling holes, painting complete all as directed.

Supply and fix Distribution board with metal door, wall mounted with provision for incorporating MCCB 160 Amps TPN as incomer and 63Amp TP MCB as outgoing with bus bar of capacity 160Amps, IP-43 double door, 4 way 160+12, 415volt all as specified and as directed. Make: Legrand cat no. 507745 or equivalent in Hager/L&T.

Supply and fix MCCB four pole, 160 Amps ,36KA breaking capacity,440volts, 50Hz, including necessary incoming and outgoing electric connection with suitable size of copper lugs etc. Make: Legrand cat no. 420245 or equivalent in Hager/L&T.

Supply and fix MCB TP, 63 Amps, C series, breaking capacity 10 KA, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. Make : Legrand Cat No. 603291 or equivalent in Hager, L&T.

Supply and fix sheet metal enclosures for DB's for incorporating MCBs, TPN, 4 way, IP-43 double glazed door with 200 amps rated busbar, 415 volts, as per IS-8623 all as specified and as directed.

Supply and fix MCB TPN, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS-8828, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408683 or equivalent in Hager, L&T.

Supply and fix sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 8way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed. Make : Legrand, Hager, Anchor

Supply and fix MCB SPN 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS-8828, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 608595 or equivalent in Hager, L&T.

Supply and fix MCB single pole10 to 32 amps 'C' series, breaking capacity 10 Ka, 'C' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. Make : Legrand Cat No. 603237 or equivalent in Hager, L&T.

Supply and fix piano flush type switch one way 6 A, one module all as specified and as directed. Make: Legrend,Cat No.5734 00 or equivalent of Philips/ Siemens

Supply and fix electronic Fan step regulator 100 watts - 1 module one module Make: Legrend,Cat No.5734 16 or equivalent of Philips/ Siemens

Supply and fix piano flush type switch one way 15 A, one module all as specified and as directed. Make: Legrend Arteor,Cat No.5734 00 or equivalent of Philips/ Siemens

Supply and Fix socket outlet multipurpose 3 pin, 16 amp and one pin, 6 amps 2 in 1 flush type universal for Power all as specified and as directed. Make: Legrand Arteor ,Cat No.5734 74 or equivalent of Philips/ Siemens

Supply and Fix socket outlet multipurpose 3 pin, 6 amp flush type universal for Power all as specified and as directed. Make: Legrand Arteor,Cat No.5734 70 equivalent of Philips/ Siemens

Supply & fix Ceiling rose surface Bakelite 65mm x 50 mm two to three terminals all as directed.

Supply and Fix Bell push flush type 5 amps single pole 240 Volts all as directed. Make: Legrand Arteor,Cat No.5734 13 or e equivalent of Philips/ Siemens

Supply and Fix Buzzer, AC, 230 volts, single pole all as directed. Make: Anchor

Supply and fixing Geyser of 25 Ltrs capacity 5 stare rating including nuts, bolts connection pipe and gaskets etc including all necessary fittingSupply and fixixtures and fixing in same position and testing all as specified and directed. Make: Havells, Model: Bueno or equivalent in Bajaj

Supply & Lay cable LT XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 3.5 core 95 sqmm all as specified and as directed.

Supply & Lay cable LT XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 3.5 core 150 sqmm all as specified and as directed.

Material and labour for PCC 1:3:6 type C2 40 mm graded aggregate for making a good disturbed surfaces of road/pavement/footpath etc complete all as specified and directed.

Supply Fabricate , install , test and commissioning of LT electrical feeder pillar panel board ,AC 3 phase , 4 wire, 415/500v ,50Hz outdoor weather proof type , fabricated with 3.15mm trick mild steel and suitable sized pressed steel frame work top with sloping canopy , bottom with detachable plates, front and rear with hinged type door and locking arrangement chamber for cable entry and exit , chamber for aluminium bus bars including aluminum bus bar 4 nos , 400Amps capacity insulted with colored PVC sleeves mounted on suitable insulators and separators, holes drilled for connection including provision of 200 amps change over switch, chamber of 4 nos for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminum strips/ road insulated, completed mounted on PCC pillars including painting of panel boards with two coats of synthetic enamel paint over one cost of red oxide primer complete all as specified and comprising of the following:- INCOMING :- (a) MCCB 4 Pole, 415 V, Thermal Magnetic type, 160 Amps with breaking capacity 36 KA Make: ABB/Siemens / legrand/Schneider - 01 No. (b) On load changeover switches 4 Pole, 415V, 160 Amps. Make ABB/Siemens/Legrand/Schneider- - 01 Nos

OUTGOING :- (a) MCCB 4 Pole, 415 V, Thermal Magnetic type, 125 Amps with breaking capacity 25 KA Make ABB/Siemens/Legrand/Schneider - 01 No. (b) MCCB 4 Pole, 415 V, Thermal Magnetic type, 100 Amps with breaking capacity 36 KA Make ABB/Siemens/Legrand/Schneider - 01 No. (c) Voltmeter electronic, digital type, 0 - 500 volts, AC, 50 Hz - 1 No. (d) Ammeter electronic, digital type, 0 - 150 amps, AC, 50 Hz - 1 No. (e) Current transformer150 / 5 amps rating, AC, 50 Hz - 3 Nos. (f) Phase indication lamps - 3 Nos. Note : All Switches and Timers are Panel mounted without Enclosures

Supply & Fix double walled corrugated pipe (DWC) pipe inner and outer size of 63/50 mm dia with all necessary coupler, end caps and bends fittings for laid in trenches all as directed.

Supply & Fix double walled corrugated pipe (DWC) pipe inner and outer size of 77/63 mm dia with all necessary coupler, end caps and bends fittings for laid in trenches all as directed.

Supply and fixix GI pipe medium grade 50 mm dia with all fittings for laid in trenches all as directed.

Supply and fix MCCB 4 Pole, 415 V, Thermal Magnetic type, 250 Amps with breaking capacity 36 KA for outgoing for existing panel Make: ABB/Siemens / legrand/Schneider

Material and Labour for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel strip 24x 4mm by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.

Supply and Fixing hi-wall mounted split units indoor/outdoor copper tubing in condenser unit including complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality 5 star rating of capacity 1.5 TR all as specified and as directed. Make: Bluestar or equivalent in LG/ Daikin/ Hitachi/ Carrier.

Supply and Fixing of Voltage Stablizer for automatic operation single phase naturally air cooled indoor type of designed for input variation between 170V to 250V with output voltage stablizeed at 230V with accuracy of 2.5% and Cap 4.0KVA all as specified and as directed. Make: V-Guard or equivalent in Voltas

Supply & Fixing of drain outlet PVC 15mm dia connected from rear side of AC/WATER COOLER upto drain with necessary clamp and fixtures on wall and floor all as specified and as directed.

Supply, installation, commissioning of Water cooler stainless steel fully , electric driven single phase having approx storage capacity of 80 litres and nominal cooling capacity of 40/80 Litres per hour. all as specified and as directed. Make: Blue star or equivalent in LG/ Daikin/ Hitachi.

Material and labour for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed.

Material and labour for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 4 sqmm including one run of 4 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed.

Supply and replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 240 Volts 20 Amps all as specified and as directed. Make:- Legrand or equivalent in L&T

Supply and laying Copper tubing 15 mm OD X 0.9 mm thick of ISI marked on wall/ laying on ceiling including with all fittings such as elbow, tees, bends etc including making opening in brick walls/stone walls suitable for fixing, testing and connect with existing copper tubing 15mm Dia making good to the disturbed surfaces to match with the existing by applying PCC, putty, white washing/colouring complete all as specified and directed by Engr in charge . Note: Copper tubing shall be medical grade copper pipe EN 13348, degreased, thickness .9mm

Supply and fix 15mm isolation valve with pressure guux complete punching type (Convex)all as specified and directed by Engr in charge .

Supply and fix oxygen flow meter, back pressure compensated flow meter with metal body and humidifier ( autoclavable) reading 0 to 15 ltr per minute all as specified and directed by Engr in charge . Make : ISI marked

Supply and fix vaccum unit consist of regulator,600ml autoclavable jar, wall bracket, driving tube adaptor complete all as specified and directed by Engr in charge . Make : Amico or Equivalent with ISI Marked

Supply and fix gas outlets consisting of self sealing valve, 'S' bracket cover and button all as specified and directed by Engr in charge. Amico or Equivalent with ISI Marked

Supply and Fixing fully automatic washing machine of 8.0 KG along with base stand including necessary fittings and fixture and drain pipe of suitable size as required upto nearby drainage all as specified and as directed. Make: IFB Model no. IFB -senator aqua sx 8kg or equivalent in LG/whirlpool.

Supply and Fix Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg

ACME Consultants

kakolil trade agencies

Island Agency

P NAIDU