CONSTRUCTION OF Balance Work of K.G.B.V at Mughal Maidan Zone Inderwal District Kishtwar

Amount

Earth work in excavation in foundation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.(70% All Soils and 30% S.Rock) (including all carriages lead and lift if any)

Providing and laying in position cement concrete of in (1:4:8) mix with 40mm nominal size crushed Aggregates specified grade xcluding the cost of centring and shuttering- All work upto plinth level.(including all carriages lead and lift if any)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcem 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size (including all carriages lead and lift if any)

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) incluing Extra for brick work in superstructure above plinth level upto floor V level. (including all carriages lead and lift if any)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.(including all carriages lead and lift if any)

Half brick masonry with bricks of class designation 75 in foundations and plinth in : Cement mortar 1 :4 ( 1 cement : 4 coarse sand) including Extra for half Brick masonry in superstructure above plinth level upto floor V level. (including all carriages lead and lift if any)

Centering and Shuttering including strulling, popping and removal of form work (including all carriages lead and lift if any)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood (including all carriages lead and lift if any)

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al!complete as per direction of engineer- in charge. Second class deodar wood(including all carriages lead and lift if any)

Providing and fixing 35mm glazed shutters for doors, windows and clerestory windows using 1Okg/sqm (4mm thick) float for glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood (including all carriages lead and lift if any)

Providing and fixing hand rail by welding etc to steel ladder, railing, balcony, railing and staircase railing including priming coat of approved steel primer GI tube (40mm) nominal size (including all carriages lead and lift if any)

Providing and fixing insulating board ceiling 6mm thick of approved quality with necessary nails etc. complete (frame work to be paid separately) : Natural colour insulating Ply 6mm thick (including all carriages lead and lift if any)

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo I Fir wood (including all carriages lead and lift if any)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all carriages lead and lift if any)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) (including all carriages lead and lift if any)

6mm cement plaster 1 : 3 (1 cement: 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams (including all carriages lead and lift if any)

Cement concrete flooring 1:2:4 ( 1cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mm thick Crushed. (including all carriages lead and lift if any)

Providing and fixing glass strips in joints of terrazo cement concrete floor.40 mm wide and 4 mm thick (including all carriages lead and lift if any)

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. (including all carriages lead and lift if any)

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (including all carriages lead and lift if any)

Providing and fixing 18 mm thick granite of any colour and shape gang saw cut minor polished (pre moduled) and prepolished) machine cut for kitchen platform vanily counter window sills 20 mm thick base cement motor 1:4 with joints ireated with white cemetn mixed with matching pigment, epoxy touch ups, including rubing cusing modulig and polishing to edge to give high gloss finish etc complete at all levels (including all carriages lead and lift if any)

Extra for edge moduling to 18 mm thick marble stone counters vanities etc including machine polishing to edge to give high glos finish etc (including all carriages lead and lift if any)

Finishing walls with water proofing cement of required shade new work (two or more ocats) applied @ 3.84 kg/10 sqm (including all carriages lead and lift if any)

Providing and Applying white cement based putty of average thickness 2mm of approved brand and manufactured over the plastered wall surface to prepeare the surface even and smooth (including all carriages lead and lift if any)

Distampering with oil based bound washable distemper of approved brand and manufactured on wall surface new work ( two or more coar) ocer and including priming coat with cement primer (including all carriages lead and lift if any)

Applying priming coat of approved brand and maufacturer on new work (including all carriages lead and lift if any)

Printing with synthetic enamal paint of Approved brand and manufacturer to give an even shade, two or more coat on new work

Providing and laying plinth protection in cement concrete 1:3:6 excluding the cost of centering and shuttering, all work upto plinth level with crushed stone aggregate over 75 mm thick under layer of dry brick bats, including all costs and carriage of all material involved (including all carriages lead and lift if any)

Providing and fixing aluminium sliding door bolts ISI marked anodize ( anodic coating) not less than grade AC10 as per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete (300 x 16)mm (including all carriages lead and lift if any)

Providing and fixing Aluminium tower bolts ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with screw etc complete (100 x 10)mm (including all carriages lead and lift if any)

Providing and fixing Aluminium tower bolts ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with screw etc complete (200 x 10)mm(including all carriages lead and lift if any)

Providing and fixing Aluminium hanging floor door stopper ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with twin rubber stopper(including all carriages lead and lift if any)

Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete (125 mm) (including all carriages lead and lift if any)

Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete (100 mm) (including all carriages lead and lift if any)

Providing and fixing white vilreous china pedestial type water with seat and lid, CP brass hinges and rubber buffers, 10 ltr low level various china flushing cistern with fillings. CI/MS brackets 40mm diameter flush bend, overflow arrangement with special of standard make WC pan with ISI marked while solid plastic seal lid with vitreous china flushing and CP lush bend (including all carriages lead and lift if any)

Providing and fixing salem stainless steal A ISI 304 (18/8 kitchen sink as per IS 13983 with CI brackets stainless steel plugs 40 mm including painting of fillings and brackets, cutting and making the good walls wherever required. Kitchen sink with drain board 470 x 420 mm bowl depth 178 mm (including all carriages lead and lift if any)

Providing and fixing wash basin with Ci brackets 15mm Cl brass pillar taps, 32 mm CP brass waste of standard pattern, including, painting of fillings fillings and brackets, cutting and making the good walls wherever required. White vitreous china wash baisin size 630 x 450 mm (including all carriages lead and lift if any)

Providing and fixing white vitreous china pedestial for whas baisin completely at the back for the reception of pipes and filling (including all carriages lead and lift if any)

Providing and fixing GS Pipes complete with GI fitting and clamps including cutting and making good the wall etc (external work) (15 mtr) (medium) (including all carriages lead and lift if any)

Providing and fixing GS Pipes complete with GI fitting and clamps including cutting and making good the wall etc (external work) (20 mtr) (medium) (including all carriages lead and lift if any)

Providing and fixing PVC waste water / rain water disposal (100 mm) (including all carriages lead and lift if any) (including all carriages lead and lift if any)

Providing and fixing PVC waste water / rain water disposal (75 mm) (including all carriages lead and lift if any)

Providing and Fixing PVC bends (75 mm) (including all carriages lead and lift if any)

Providing and Fixing PVC bends (100 mm)(including all carriages lead and lift if any)

Providing and Fixing PVC pipes for sink or wash basin including PVC waste fittings complete 40 mm dia (including all carriages lead and lift if any)

Providing and Fixing CP brass long nose cock of app quality 15 mm nom dia(including all carriages lead and lift if any)

Providing and Fixing Cpstop cock conforming to IS 18931 15 mm nominal bore ( conceled/ of standard design) (including all carriages lead and lift if any)

Providing and Fixing brass bid cock of app quality 15 mm nominal bore (including all carriages lead and lift if any)

providing and fixing towel rod(including all carriages lead and lift if any)

providing and fixing towel ring(including all carriages lead and lift if any)

Providing and fixing CP brass angle valve for basin mixer and giyser points of approved make conforming IS 8931 15 mm nom (including all carriages lead and lift if any)

Providing and fixing (600 x 450) mm bevelled edge mirror of superior glass( of approved quality) complete with 6mm thick hard based ground fixed to wodden with CP brass screws and washers complete (including all carriages lead and lift if any)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].(including all carriages lead and lift if any)

BILAL ASHRAF MINTOO