PERIODICAL SERVICE TO MD ACCN AND OTM ACCN AT MIL STN NABHA AND SANGRUR UNDER GE (SOUTH) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth with using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and fair without using extra cement complete all as specified and directed.

Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams, ceiling and similar works incl provison of supports if reqd and dubbing with PCC (1 : 1.5 : 3) using 12.5mm graded crushed stone aggregate in any portion of 15mm to 50mm thick and finshing to desired shapes.(including Chicken Wire mesh)

M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified & as directed.

M&L for Preparation of new surfaces and applying two coats of oil bound distemper (of approved quality & tint) surface of wall using painting rollers, over a coat of primer completed all as directed and secified. Note: Manufacturer's instruction is to be followed for prepration of surface.

M&L for Preparation of old decorated surfaces by washing, scrubbing down and applying two coats of oil bound distemper (of approved quality & tint) surface of wall using painting rollers, completed all as directed and secified. Note: Manufacturer's instruction is to be followed for prepration of surface.

M&L for Preparation of old decorated surfaces of walls by washing, scrubbing down and applying one coat of oil bound distemper (of approved quality & tint) surface of wall using painting rollers, completed all as directed and secified. Note: Manufacturer's instruction is to be followed for prepration of surface.

M&L for Preparation of old decorated surfaces of ceiling by washing, scrubbing down and applying one coat of oil bound distemper (of approved quality & tint) surface of wall using painting rollers, completed all as directed and secified. Note: Manufacturer's instruction is to be followed for prepration of surface.

M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oil emulsion distemper on walls/ceiling all as specified and directed

M&L Preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over complete all as specified and directed.

M & L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying one coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint by roller complete all as specified & as directed.

M & L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint by roller complete all as specified & as directed.

M & L for preparation new plastered to walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint by roller over a coat of priming coat complete all as specified & as directed.

M&L for preparing new plastered surfaces of walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M&L for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M & L for preparing existing treated surfaces on walls including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M & L for preparing existing treated surfaces on ceiling including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M & L for preparing old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparing old painted wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Complete removal of existing treatment of any type/description such as cement base paint, external emulsion , internal distemper, internal painting etc from external surfaces/ Internal of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder including removal of waste material from site complete all as specified and directed.

M&L for preparing new/ untreted surface and applying acrylic wall care putty in walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (thickness vary from 1.5 to 2mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving two coats of interior/exterior paints complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparing old surface and applying 01 coats of exterior emulsion paint (light shade) by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including preparation of old surfaces all as specified and directed.

S K BANSAL AND CO. (BID ID -3130989)

M/s MANN CONSTRUCTIONS (BID ID -3108828)

RINKU BROTHERS (BID ID -3131709)