GE U(N) 16 2022 23 REPAIR TO JOINERY FLOORING PLASTERING INTERNAL WATER SUPPLY ETC OF HQ SUB AREA PROVOST UNIT CENTRE UP AND DOWN CONVEY GROUND TRANSIT CAMP AND TA COY UNDER GE (N) UDHAMPUR

Amount

M&L for disconnection of existing tanks, setting side for repairing, cleaning etc and hoisting after cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the word ' CLEANED ON WITH DATE' with white paint including replacement of broken/unserviceable fitting such as Elbow, Tea ,socket,nipple of any size etc,complete all as specified and directed by the Engineer-in-Charge.

M&L for description all as per Srl item No.01 here in before but of capacity exc 500 ltrs and upto & including 1000 ltrs and endorsed the word' ' CLEANED ON WITH DATE' with white paint including replacement of broken/unserviceable fitting such as Elbow, Tea ,socket,nipple of any size etc,complete all as specified and directed by the Engineer-in-Charge.

M&L for description all as per Srl item No.01 here in before but of capacity exc 1000 ltrs and upto & including 2000 ltrs and endorsed the word' ' CLEANED ON WITH DATE' with white paint including replacement of broken/unserviceable fitting such as Elbow, Tea ,socket,nipple of any size etc,complete all as specified and directed by the Engineer-in-Charge.

M&L for dismantling water tanks of exceeding 250 & not exceeding 500 ltrs and removing to store, complete all as specified and as directed.

M&L for dismantling water tanks of exceeding 500 & not exceeding 1000 ltrs and removing to store, complete all as specified and as directed.

M&L for dismantling water tanks of exceeding 1000 & not exceeding 2000 ltrs and removing to store, complete all as specified and as directed.

M&L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.

M&L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.

M&L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 2000 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.

M&L for taking up/down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipes complete all as specified and directed by the Engineer-in-Charge.

M&L for taking up/down steel tubing and connections including cleaning for refixing or removal to store 20 mm bore pipes complete all as specified and directed by the Engineer-in-Charge.

M&L for taking up/down steel tubing and connections including cleaning for refixing or removal to store 40 mm bore pipes complete all as specified and directed by the Engineer-in-Charge.

S&F 15 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed by the Engineer-in-Charge.

All as per SI NO 13 above but except pipe

S&F 20 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed by the Engineer-in-Charge.

All as per SI NO 15 above but except pipe

S&F 40 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed by the Engineer-in-Charge.

All as per SI NO 17 above but except pipe

S& F 20 mm gun metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified and directed by the Engineer-in-Charge.

S& F 20 mm gun metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by the Engineer-in-Charge.

S& F ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and directed.

S&F in repairs ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and directed.

S&F stop valves 15mm bore, brass, fancy type with flange, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by the Engineer-in-Charge.

S&F stop valve 15mm bore with long shank & cup (concealed type) of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-110gms) complete all as specified and directed by the Engineer-in-Charge.

S&F in repair stop valve 15mm bore with long shank & cup (concealed type) of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-110gms) complete all as specified and directed by the Engineer-in-Charge.

S&F angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

S&F in repair angle stop valve 15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-90gms) complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs Soap dish, Vitreous China white, approximate size 160x160x90mm complete all as specified and directed by the Engineer-in-Charge.

S&F in repair Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' 150x150 mm incl CI cover complete all as specified.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by the Engineer-in-Charge.

S&F in repair 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by the Engineer-in-Charge.

M&L for PVC (SWR) floor trap plain with grating including jointing with solvent cement (75 mm bore) complete all as specified and directed by the Engineer-in-Charge.

S&F PVC nahani trap with grating to 75mm bore including jointing to waste pipe fixed in cement complete all as specified and directed by the Engineer-in-Charge.

S&F in repair of 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed in repair complete all as specified and directed by the Engineer-in-Charge.

S&F Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and as directed.

S&F Plastic water closet seat cover, closet pattern with flat bottom and cover and incl mild steel chromium plated or aluminum hinges device complete fixed in repairs , all as specified.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests complete incl trap set in and provision of lime concrete filling in sunken portion complete all as specified and directed.

S&F in repair water closet Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white complete, including connection to drain pipe and to flushing pipe anti syphonage pipe etc, fixed in repair, complete all as specified and as directed

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed by the Engineer-in-Charge.

S&F push tap 15mm bore any colour of PTMT screwed for iron pipe suitable for urinals. (min. weight 15mm-50gms) complete all as specified and directed by the Engineer-in-Charge.

S&F Vitreous China wash basin, white, flat back, size (550 x 400mm) excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed by the Engineer-in-Charge.

S&F flush pipe with rubber washer PVC 32 mm dia for low level flushing cistern pipes, complete all as specified and directed by the Engineer-in-Charge.

S & F for waste pipe of dia 40mm for WHB/Sink, complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs 32mm bore dia of CP brass waste coupling suitable for WHB, complete all as specified and directed by the Engineer-in-Charge.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & wastes; including bedding in CM on to dwarf wall or including fixing cantilever brackets & connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by the Engineer-in-Charge.

S&F in repair health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed by the Engineer-in-Charge.

S&F in repair Jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed complete all as specified and directed by the Engineer-in-Charge.

S&F in repair bib tap 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm - 90gms) complete all as specified and directed by the Engineer-in-Charge.

S&F in repair bib tap with long body 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-120 gms) complete all as specified and directed by the Engineer-in-Charge.

S&F in repair pillar tap15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-110gms) complete all as specified and as directed.

S&F pillar tap swanneck fancy type15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-120gms) complete all as specified and as directed.

S&F towel rail 450mm long of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 170gms) complete all as specified and directed by the Engineer-in-Charge.

S&F bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

M& L for cutting chases in Stone concrete block or slab, walls , pinning in , making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing steps, cills, sunshed, shelves, lintels, etc ; and cutting chease for water tubing or concealed conduit wiring , etc, and making good cutting not exc 10 cm girth complete all as specified and as directed.

M& L for dismantling of PVC rain water pipe of any size any description complete all as specified and directed by the Engineer-in-Charge.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm bore any radius with oveal & acces door complete all as specified and as directed.

S&F110 mm bore PVC (SWR) bends with access door any radius, all as specified and directed by the Engr-in-charge.

S&F PVC (SWR) junction single, (Single T/Y junction with Access door)75mm equal or unequal complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T/Y junction with Access door) 110 mm equal or unequal complete all as specified and as directed.

M&L for dismantling ceiling boards,fibre pulp insulation etc or insulation boards/slabs/blankets,any thickness, including cover and MS Tee grid,all as specified.

S&F false ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the desin (occeanic, lake & hill,cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross'T' at 600mm c/c to foRm a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, and refixed all exesting electric wiring and fixture all complete at all heights as per direction of Engineer-in -Charge.

S&F false ceiling boards of Fibre Cement Designer tile white painted (High Pressure Steam Cured) of 4mm thickness (as per IS-14862) of size 1220mmx1220mm/ 1195mmX595mm/ 1220mmX610mm and any one of the design (occeanic , lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid including required cutting/making opening for services like fixed over existing grid inluding necessary scaffolding etc and refixed all existing electric wiring and fixture all complete at all heights as per direction of Engr-in-charge.

Supply and fixing in repairs Anodised aluminium snap grid frame work with 20X25 mm 'T' and 20X20mm 'L' section with grid size of 605X605mm including with necessary 3.15 mm GI wire as in suspenders etc complete as specified and directed by Engr-in-charge. Note : Existing electric wiring etc, to be taking down carefully and refixing in position after fixing of false ceiling work. The rates are inclusive for the same, nothing extra shall be paid on account of same.

Refixing of existing false ceiling board of any size and description inclusive taking down complete all as specified and directed by Engineer-in-Charge.

M&L for half brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks complete all as specified and as directed.

M&L for demolition of Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and recast concrete articles complete all as specified and directed by the Engineer-in-Charge.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks complete all as specified and as directed.

M&L for dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in sub base to receive floor rough finishes complete all as specified.

M&L for glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick and above nearest sizes set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm screed bed in 1:3 cement mortar complete all as specified and as directed.

M&L for non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm screed bed 1:4 cement mortar complete all as specified and as directed.

S&F coloured Glazed ceramic tiles in vertical surfaces 600x300mmx7mm thick and above nearest sizes set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm screed bed in 1:3 cement mortar complete all as specified and as directed.

S&F white Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm screed bed 1:4 cement mortar complete all as specified and as directed.

M&L for dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet thickness to be checked should be 0.50mm (TCT) thickness and coating shall be AZ-150 of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction or as specified and directed including gapp fitting with plain cement concrete 1:3:6 in between wall and roof sheet etc complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed by the Engineer-in-Charge.

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal/ Aluminium frames including punching or drilling out old glazing pins/ spring clips complete all as specified and directed .

S&F in repairs 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each panecomplete all as specified and directed by the Engineer-in-Charge.

S&F in 3mm figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by the Engineer-in-Charge.

S&F in repair galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete all as specified and directed by the Engineer-in-Charge.

Taking down chowkats or frames exc 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames) complete all as specified and directed

All as per SI NO 84 above but n.exc 1.5 Sqm each complete all as specified and as directed.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm complete all as specified and as directed.

All as per SI NO 87 above but exceeding 2 Sqm each complete all as specified and as directed.

Refixing in same opening shutters of any description not exc 1 sqm complete all as specified and as directed.

Refixing in same opening shutters of any descp exc 1 sqm but n.exc 2 sqm complete all as specified and as directed.

Refixing in same opening shutters of any descp exc 2 sqm complete all as specified and as directed.

S&F 125x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fast etc., and back recess to be filled with pcc (1:3:6) type C-0 concrete complete all as specified.

M&L for cutting holes in brick walls built in cement mortar and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc hail but n.exc one brick complete all as specified and as directed.

S&F 32 mm thick Flush shutter, solid core construction, with block board core and decorative prelaminated face panels (as per sample kept in GE office) on both faces complete all as specified and directed by Engineer-in-Charge.

M&L for 35 mm Glazed and skeleton shutters, 2nd class H.W open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the ront face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing but 2mm thick Moulded Prelam PVC Sheet on the front ace & 2mm Plain colour PVC Sheet on back face ® complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

M&L for factory made pressed steel frame steel window/ vent with glazed & gauged shutter (combined with side hung shutters incl box type inges, steel handle, necessary locking arrangement, peg stay complete with one shop coat of zinc chrome primer including PCC (1:3:6) type -0 filling in back side recess profile portion, complete all as specified and directed by Engineer In Charge.Note : Rate quoted are included for wire gauged and glazed window complete & shall be measurred as overall out to out one side only.

S&F floor door stoper of 140 mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed.

S&F 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on olt plate and two on staple plate and fixed complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs MS helical door spring 300mm size including roller and roller plate fixed to wooden or steel frames with welding/fitted with screws etc, complete all as specified and as directed.

S&F Aluminium powder coated (match with door shutters) Hydraullic door closer suitable for aluminium glass door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed complete all as specified and directed by the Engineer-in-Charge.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by the Engineer-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:4 finished even and smooth without using extra cement and with using Water proofing compound .(Water proofing compound shall be measured and paid sepratly )complete all as specified and directed by the Engineer-in-Charge.

M&L for rendering 10 mm thick in cement mortor 1:6 on fair face on brick/concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed by the Engineer-in-Charge.

M&L for two coat of cement base paint over a coat of alkali resistant primer paint including preparation of newly plastered of wall complete all as specified and as directed.

M&L for two coats of oil bound distember over a coat of primer over two coats of approved wall care putty over and including preparation of new plastered surfaces of wall complete all as specified and directed.

M&L for preparation of new steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over preprimed red oxidesurfaces, complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.

S&F in repairs Brass CP shower rose 125mm size shower aRm 15mm size, 195mm long with bend of 45 degreee with flange complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by the Engineer-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed by the Engineer-in-Charge.

S&F gratings, fixed in repairs complete all as specified and directed by the Engineer-in-Charge.

M&L for machine cut kotta stone slab flooring of size 550 x 550mm (20-25 mm) thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the incl rubbing and polishing complete over and including screed bed 20 mm thick in CM 1:4 including demolition and dismantling complete all as specified and directed.

All as per SI NO 118 above but on vertical surfaces as risers incl M&L 5 mm thick screed in CM 1:4 including demolition and dismantling complete all as specified and directed.

M&L for marble strip cut to width n.exc 100mm wide fixed as border in floor, stair case walk ways etc., incl rubbing and polishing complete over and including screed bed 20 mm thick in CM 1:4 including demolition and dismantling complete all as specified and directed

M & L for Red/Black granite(of any type)stone slab 16mm thick machine cut as in window cill/counter top slab bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with rounding to edges of stone slabs one edge complete Including 10mm thick backing coat CM 1:3 complete all as specified and directed.

M&L for demolition of un-reinforced cement concrete in roofs,floors ( other than ground floors), beams, staircase, landing, chajjas and similar suspended work.of and pavings not exceeding 15 cm thickness(below or above ground level) complete all as specified and directed by the Engineer-in-Charge.

M&L for 25 mm thick plain cement concrete1:2:4 type B1(using 20 mm graded stone aggregate) as in subbase of flooringcomplete all as specified and directed by the Engineer-in-Charge.

M&L for providing and laying water proofing treatment to sunken portion of WCs, bathrooms, roof etc by applying two coat of slurry of cement @ 0.488kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253kg/sqm this layer allowed to air cure for 4 hrs then applying slurry of cement @ 0.242 kg/sqm mixed with acrylic based polymer modified cementitious composite compound @0.126kg/sqm and allowed to aircure for 4 hrs and joints seal with sealing compound as approved by GE complete all as specified and directed by the Engineer-in-Charge. Note: (i) Before laying of lime concrete joints of trap/WC/Soil pipes shall be properly sealed with sealing compound of Roofex/Forre/FOSROC and provn of P or S trap & Nahani /Floor traps with long aRm and also provn of spout of 40 mm dia.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement mortot as in CM 1:3 finishing even & smooth w/o using extra cement, complete all as specified and as directed.

M&L for lean concrete using 40mm graded stone aggregate as in 1:5:10 as in filling sunken portion treatment, complete all as specified and as directed.

M&L for repair 20 mm thick cement plaster on fair face of concrete surface including repair of doubing roof/chajja/facia surfaces in CM 1:3 finished even land smooth without using extra cement over complete all as specified and directed. (Water proofing compound shall be measured and paid sepratly )

Supply only integral water proofing compound complete all as specified and directed by the Engineer-in-Charge.

S&F in repair Corner glass shelf with assembly complete all as specified and directed by the Engineer-in-Charge.

M&L for dismantling boarding, any description, fixed in any position with nailscomplete all as specified and directed by the Engineer-in-Charge.

S&F 18/19 mm thick Prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with crews to timber frame work as in Cupboard, kitchen cabinet or similar work etc including provision of 6mm thick teak wood lipping alround the board/ shutter complete all as specified and directed by the Engineer-in-Charge.

S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed by the Engineer-in-Charge.

S&F Aluminium handles, cast type, anodised 100mm long complete all as specified and directed by the Engineer-in-Charge.

S&F 100 size Hasp and staple, Aluminium Anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed by the Engineer-in-Charge.

S&F magnet catchers 50mm steel plate stainless steel body and striking plate including letting in & fixed complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs stainless steel multipurpose basket in wooden drawers/partitions for storing rations of various types made of 3 to 4mm dia stainless steel rods, fixed in side partitions etc fixed, complete all as specified and directed by the Engineer-in-Charge for modular kitchen.

S&F in repair stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen, complete all as directed by Engr-in-Charge for modular kitchen.

S&F in repairs telescopic drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, for modular kitchen, complete all as specified and directed by the Engineer-in-Charge. for modular kitchen.

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows by means of planer/chisling etc. including petty repairs material like screws/nails, plug etc. to make it functionalcomplete all as specified and directed by the Engineer-in-Charge. Note : 1. Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. 2. The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell /Engr-in-charge daily and all complaint will be rectified by the contractor with in same day than the returned the complaint slip after completion of complaint and get recipt from concered JE/Engr-in-charge(xerox copy of complaint slip submitted to GE office at the time of payment of RAR/FB)complaint slip shall be .If he fails to complete the work with in same day then recovery will be made @50.00 per day complete all as specified and as directed.

MADAN LAL SHARMA AND SONS

TULSI RAINA AND SONS

sohtra and co