CA NO CWE/CHM-49/2021-22 RENEWAL OF FURNITURE AGAINST SURVEYED OFF FURNITURE AT BSO GE CHANDIMANDIR

Amount

STEEL FURNITURE (PART-I)

Almirah Large Steel with Shelves (FD-1031). All dimension, shape and size shall be followed as per drg. (i) Steel Almirah (body, shutter, drawer, locker, vertical partitions and shelves) shall be made out of 1 mm thick mild steel sheet all as shown on drawings. (ii) All joints/welding/fixing shall be done all as shown on drawings and with standard workmanship. (iii) Almirah shall be provided with three way locking device as per ‘Godrej’ pattern .The handle shall be made out of steel chrominium plated as per ‘Godrej’ pattern. 4 lever brass lock 65 mm size shall be provided as per Godrej pattern, of make GODREJ, LINK, HARRISON.(iv) Almirah shall be provided with three numbers adjustable shelves with four compartments (v) One steel chrominium plated handle shall be provided to the drawer. (vi) All steel surfaces internally and externally shall be painted with two coats of synthetic enamel paint (olive green) with spray gun over a coat of zinc chromate steel primer. (vii) The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint. (viii) Rest all as shown on drawing No FD-1031 complete all as specified and directed.

Almirah (Medium) Steel with Shelves (FD-1032). All dimension, shape and size shall be followed as per drg. (i) Steel Almirah (body, shutter, drawer, locker, vertical partitions and shelves) shall be made out of 1mm MS plain black sheet all as shown on drawings. (ii) All joints/welding/fixing shall be done all as shown on drawings and with standard workmanship. (iii) Almirah shall be provided with three way locking device as per ‘Godrej’ pattern .The handle shall be made out of steel chrominium plated as per ‘Godrej’ pattern. Six lever brass lock shall be provided as per Godrej pattern of make Godrej, Link, Harrison. (iv) One steel chrominium plated handle shall be provided to the drawer. (v) Locker of the almirah shall be provided with locking arrangement operated with handle as per Godrej pattern. (vi) All steel surfaces internally and externally shall be painted with two coats of synthetic enamelled paint (silver grey colour) with spray gun over a coat of zinc chromate steel primer. (vii) The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint. (xiii) Rest all as shown on drawing No FD1032 complete all as specified and directed.

Locker Steel (FD-1029). (i) Over all size shall be 760mm long, 600mm wide and 1100 mm high. (ii) Locker steel shall be made of mild steel black sheet 1 mm thick. (iii) Hanging rod shall be mild steel chromium plated 20mm dia, 1.8mm thick with socket. (iv) Unless otherwise indicated on drawings, handle shall be of Mild steel chromium plated and 100 mm grip length. (v) One hasp & staple 75mm long shall be fixed to shutter. The shutter shall have the locking device also. (vi) FINISHES: Mild Steel surfaces shall be (spray) painted with synthetic enamelled paint of approved shade over a coat of primer externally and internally. (vii) Rest all as shown on drawing No. FD-1029 complete all as specified and directed. Note : Fixing of ‘ Locker” to the wall although shown in the drawing is outside the scope of this contract however key plates for fixing as shown on drawings shall be provided.

Bed Map Steel (FD/E6/MAP/08(R)). (i) Bed hard shall be manufactured all as per details shown in the drawing. All dimensions, shape and size shall be followed as per drawing. (ii) All square and rectangular MS pipes shall be of thickness 18 gauge.(iii) Top of bed shall be of 12mm thick commercial plywood (unpolished) as per IS-303 . (iv) Head board and foot board shall be of 18-19mm thick Prelaminated particle board (both side decorative finish shade as approved by GE ) as specified here-in- before, screwed to MS strip all as per details shown in drawing. Standard PVC edging (minimum thickness 1.6mm) shall be provided alround in Head board and foot board. (v) Hard rubber/PVC shoe shall be provided to the bottom of each leg. (vi) All exposed steel surfaces shall be painted with two coats of synthetic enamel olive green paint over a coat of zinc chromate steel primer. The welding joints shall be filed smooth before application of primer. The surface shall be thoroughly cleaned and prepared prior to application of paint. (vii) Rest all as shown on drawing No FD/E6/MAP/08(R) complete all as specified and directed.

Table Bed Side (MAP) (FD/E6/MAP/15R)). All dimension, shape and size shall be followed as per drg. (i) Pipe shall be 18mm MS square pipe (18 gauge) black powder coated. (ii) Top and back portion above top of Table bed side shall be of 18-19mm thick Prelaminated particle board (one side decorative finish shade as approved by GE and other side white balancing lamination) as specified here-in- before. Standard PVC edging (minimum thickness 1.6mm) shall be provided alround in top and pull out tray. Back of table bed side shall be of 6 mm thick commercial plywood as per IS-303. (iii) Sides and back of drawers shall be provided with 12 mm thick commercial plywood as per IS-303. Bottom of drawer shall be provided with 6 mm thick commercial plywood. (iv) Movement of Pull out tray and drawers shall be made on teak wood runners. One aluminum anodized handle shall be provided to each drawer. (v) Stoppers shall be 2nd class Hard wood (Sal/benteak/Bijasal/Hollock). (vi) Hard rubber/PVC shoe shall be provided to the bottom of each leg. (vii) All exposed surfaces of timber and plywood shall be French polished. (viii) All joints fixing shall be done in accordance with standard workmanship and specifications. (ix) Rest all as shown on drawing No FD/E6/MAP/15R) complete all as specifed and directed.

Charpoy Plywood Top (MAP) (FD/MAP-II/01). DIMENSION: Overall size shall be 1980mm long, 900mm wide and 440mm high. DESCRIPTION. Two long rails and two short rails shall be of 25mmx65mmx16 guage MS rectangular pipe .The legs shall be of size 32mm x 32mm x 16 guage welded to long and short rails as shown on drg.Two stiffeners of size 25mm x 25mm x 16 guage shall be provided in equidistant between two opposite long rails. Six number cleat of size 25mm x 60mm x 6mm shall be welded with frame to support ply. Two stiffeners joining legs of size 25mm x 25mm x 16 guage shall be provided at 150mm from ground level .12mm thick commercial plywood shall be provided for top as shown on drg with proper nut and bolt .PVC hard rubber shoes shall be fixed at bottom of each legs Rest all as shown on drg No FD/MAP-11/01 complete all as specified and directed. FINISH: All steel surfaces shall be Pre treated with epoxy powder coated oven baked with black colour.

Teapoy Verandah (FD/E6/MAP/17). All dimension, shape and size shall be followed as per drg. (i) Frame, stiffeners, legs ,etc. shall be made of 18mm square MS pipe of thickness 18 gauge. (ii) Top of Teapoy shall be of 18-19mm thick Prelaminated particle board (one side decorative finish shade as approved by GE and other side white balancing lamination. (iii) Base tray made with 5mm dia mild steel bar (12 x 10Nos equidity distance) shall be provided. (iv) 4mm thick teak wood edging shall be provided alround. (v) FINISHES: All steel surfaces, exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of surface. (vi) Rest all as shown on drawing No FD/E6/MAP/17 complete all as specified and directed.

Chair Writing (Map) (FD/E6/MAP/12) (a) All work shall be of Standard class. All dimensions shape and size shall be followed as per Drawing. (b) Back form shall be with cuntoured Lumber support for extra comfort. (c) 120 mm thick hot pressed ply wood upholstered with fabric and moulded polyurethane foam wiht PVC lipping all round. Fabric shall contain the acrylic, polyster, poly proplyene material and colour as approved by the GE. (d) Polyurethane foam shall be 50mm thick and shall be moulded with density 50 -55kg/cum thick and hardness 20+/- 2kg on Hampde Machine. (e) Legs shall be cantilever type powder coated MS tublar frame made out of 25mm x 10mm Section. (f) All joint fixing shall be done in accordance with standard workmanship and specification. (g) Rest all as shown on drawing No FD/E6/MAP/12 complete all as specified and directed.

Wooden Furniture & TP (PART-II)

Table Peg (FD-384) (Size 450 x 300x x380mm) Ist class seasoned teak wood shall be used through out. Top shall be made out of pre-laminated particle board 18/19 mm thick ISI marked exterior gde. 6 mm thick teak wood beading shall be used all around at top. Rubber PVC shoes shall be provided at the bottom of legs duly screwed. All wood surfaces shall be French polished to a glossy finish . Rest all as per drg No FD-384 complete all as specified and directed.

Side Board (FD-372) Overall size shall be 1500mm long, 450mm wide and 760mm high. DESCRIPTION: All wood shall be first class hard wood teak .The bottom frame shall be of 18mm thick teak wood frame and shall be 125mm high from ground.All sides i.e-front shutters ,top,bottom sides and front sides of drawers shall be of 18-19mm thick prelaminated particle board .Four drawers shall be provided in the right hand side of the side board . Left hand side shall have one hung shutters. Back of side board shall be of 12mm thick commercial ply irrespective of what is shown on drg.Bottom of drawers shall be of 6 mm thick plywood commercial. The shutters shall have continuous piano type hinges. The top of one shutter shall have 50mm long flush bolt fitted towards inside of shutter. Two knobs shall be provided to the shutter. Four knobs shall be provided to the four drawers (one for each drawer).3mmx19mm teak wood edging shall be provided to all edges of particle board and shelf. Rest all as per drg No FD-372 complete all as specified and directed. FINISH : All wood and particle board surfaces exposed to view when placed in position shall be French polished with high gloss finish.

Teapoy Wooden (FD-278) All as shown on drg. Overall size of Teapoy wooden shall be 600mm long, 450mm wide 540mm high. All wood shall be of Ist class teak wood. Top of table shall be made out of prelaminated particle board 18/19mm thick exterior grade and 4mm thick teak wood beading shall be provided all round the table irrespective of what is shown on drg. Rest all as per drg No FD-278 complete all as specified and directed.

Bin Multipurpose (FD/E6/MAP/09) All dimension, shape and size shall be followed as per drg. (a) All wood work shall be of 1st class hard wood (Teak). (b) Teak wood stiffeners of size 25mm x 25mm and legs of size 45mm x 45mm shall be provided as per details shown in the drawing. (c) Back shall be of 12mm thick commercial plywood as per IS-303. (d) Top, sides, shutter, drawer and shelves shall be of 18-19mm thick prelaminated particle board (one side with decorative lamination of teak finish shade and other side white balancing lamination) as specified here-in-before 4mm thick teak wood edging shall be provided around to all exposed edges of prelaminated particle board. 30mm steel chromium plated knobs shall be provided to each shutter as per sample approved by GE/BSO or equivalent makes as approved by GE. (e) All shutter shall be provided with mild steel power coated 50mm D type handle. (g) All exposed surfaces of timber, ply wood based surfaces (except laminated surfaces) shall be French polished and shutter shall be provided with magntic catcher. (h) Rest all as shown on drawing No FD/E6/MAP/09 complete all as specified and directed.

Chair Dining with Cushion (FD/E6/MAP/10) All dimension, shape and size shall be followed as per drg. (a) All wood work shall be of 1st class hard wood (Teak). (b) Seat shall be 75MM thick foam of 40 density covered with good quality tapestry cloth (cost of cloth not less than Rs 450/- per meter) as approved by GE over 12MM thick commercial plywood as per IS- 303. (c) Nylon buffers of appropriate size shall be screwed to the bottom of each leg. (d) All exposed surfaces of timber and plywood shall be french polished. (e) All joint fixing shall be done in accordance with standard workmanship and specification and all as shown on drawing. Rest all as per drg No FD/E6/MAP/10 complete all as specified and directed.

Table Centre (FD-274) All dimension, shape and size shall be followed as per drg. Ist class seasoned teak wood shall be used through out. Top shall be made out of pre-laminated particle board 18/19 mm thick ISI marked exterior gde. 6 mm thick teak wood beading shall be used all around at top. Rubber PVC shoes shall be provided at the bottom of legs duly screwed. All wood surfaces shall be French polished to a glossy finish. Rest all as per drg No FD-274 complete all as specified and directed.

Chair easy (FD-229) All dimension, shape and size shall be followed as per drg. Teak wood seasoned Ist class shall be used through out . Canning shall be done with cane plastic 2 mm thick and 3 mm for border. Cane plastic shall be used of make Premier/Usha or equivalent as approved by GE. All exposed surfaces shall be french polished to a glossy finish and rest all as per drg No FD-229 complete all as specified and directed.

Table dressing ladies with mirror (FD-251) All dimension, shape and size shall be followed as per drg. All wood shall be of Ist class hard wood teak .The bottom side and other side of dressing table shall be of 18/19 mm thick prelaminate particle board. Top shall be of 18/19 mm thick prelaminated particle board. Frame work of mirror shall be of Ist class teak wood back shall be of ply wood 6 mm commercial ISI marked, Mirror shall be 5 mm thick ISI marked. Make of mirror shall be Atul/Modi/Saint Gobin. All wooden surfaces shall be French polished to a glossy finish. Rest all as per drg No FD-251 complete all as specified and directed.

Chair dining (FD-1105) All dimension, shape and size shall be followed as per drg. Teak wood Ist class shall be used through out . Canning shall be done/woven in Godrej pattern with cane plastic 2 mm wide and 3 mm wide for border. Make of cane shall be of Premier/ Usha or equivalent. All exposed surfaces shall be french polished to a glossy finish. Rest all as per drg No FD-1105 complete all as specified and directed.

RECEPTICAL PVC (FD/E6/MAP/13). All dimension, shape and size shall be followed as per drg. (a) Recepticle shall be of covered plastic container of 75 ltr capacity made with thick polymer plastic of cello, brite or equivalent make alongwith lid and handles. Recepticle shall be of bright colours ie. Red,Green,Blue etc. Rest all as per drg No FE/E6/MAP/13 complete all as specified and directed. Recepticle shall be of make: Blow plast/Neel Kamal/ Supreme/ Cello/Polyset, as approved by GE.

BATH MAT PVC (FD/MAP/E6/07) Over all dimensions (400 x 300 mm) (a) All PVC work shall be of standard class PVC. (b) 5mm thick PVC sheet. (c) 10 x 100mm legs in ARC. (d) 3 x 10 thick stiffener moulded alongwith the seat in single peace. (e) PVC Bath Mat shall be of make blow plast/Neel Kamal/ Supreme/ Cello/ Polyset/ Brite/ syntex. (f) Hard rubber shoe shall be provided to the bottom of each leg. (g) Rest all as shown on drawing No FD/MAP/E6/07 complete all as specified and directed.

Sofa set 5 seater with cushion (FD-281 Sheet No 1/2 & 2/2). All dimension, shape and size shall be followed as per drg:- Sofa Set 5 Seater with Cushion. The set shall consist of one long piece of three seat and two small pieces of one seat each. Timber work shall be of Ist class seasoned teak wood. All joints and fixing shall be done in accordance with standard workman ship/specifications. Foam shall be 100 mm thick cushion of ‘cool’ foam of 40 density of size 550 mmx525mmx100mm covered with best quality tapestry cloth rate not les than Rs. 450/- per meter colour as approved by GE. All wood surfaces exposed to view shall be French polished. Rest all as per drg No FD-281 Sheet 1/2 & 2/2 complete all as specified and directed.

Table Bed Side (FD/276):- (a) Overall size shall be 460x230x510mm. (b) Top of table bed side shall be made of 18/19mm thick pre laminated particle board, one side laminated & other side white, balancing exterior grade with 5mm thick teak wood beading alround. (c) All wood work & teak veneered surface shall be French polished. (d) All joints & fixing shall be done in accordance with standard workmanship/specification in the drg No 276. (e) Rest all as per drg No FD-276 complete all as specified and directed.

J.D.Builders

M/s Rajesh Kumar Jain