RENOVATION OF ROOM NO. 217, DELUXE BUILDING, SECTOR-9, CHANDIGARH (IBM SCHEME NO. W2/2025/25373).

DSR Item No. 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group C

DSR Item No. 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required.

Group C.

DSR Item No. 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

DSR item No.1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

DSR Item No.1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

DSR item No.1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

Telephone socket outlet

DSR item No.1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

DSR item No.1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

DSR item No.1.28 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

8 Module

12 Module

DSR item No.1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

DSR item No.1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

DSR Item No. 1.33 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

DSR Item No.1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

DSR Item No.39.17 Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, (As per Complete Item No. 14 of the DNIT)..

1 Run of cable

DSR item No.1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

DSR ITEM NO. 8.7 LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 16 of the DNIT).

Supply & erection of Cabin Fan 16" sweep (metal body) oscillating type complete with aluminium blades & regulator. The fan should have regulator switch for speed regulation. The fan should be of Havells make V3/Crompton make Strom2/ Orient make Tornado-II only. (As per Complete Item No. 17 of the DNIT).

S/E of ceiling fans with copper winding but without regulator complete with aluminium blades, plastic canopies 2 Nos. double ball bearing, MS hanging rods, condenser, reels, clamps etc. The body of fan and blades should be white in colour. (As per Complete Item No. 18 of the DNIT).

Size 48” 1200mm sweep ceiling fan of Havells make Velocity White / Orient make Summer Breeze / Crompton make High Speed / Usha make Striker/ Bajaj make Sabse Tezz EE only.

Supply and fixing of 12 modules (200 mm x 150 mm) G.I box suitable for accommodate the following accessories along with modular base and cover plate for modular switches in recess / surface etc as required for Computer Point with 4 Nos. 5/6 Amp. modular switch and 4 Nos. 3 pin 5/6 Amp. modular socket outlet. (As per Complete Item No. 19 of the DNIT).

Supply & fixing of Computer jack & contact one module RJ45 of Molex/ R&M/ Panduit make including making connection etc. as required to complete the job to the entire satisfaction of Engineer-in-charge.

Supply & Erection of 3 mm thick white glazed bakelite sheet on existing M.S. box. The job includes the cost of sheet and making holes & cutting and fixing with screws as required to complete the job. The make should be Super Hylam / Formica / GreenLam only.

Supply and fixing extra down rod of 15 mm dia G.I. pipe length to fix the ceiling fan. The job includes cost of cutting, making holes and cutting groove in pipe for proper tightening of rod to the fan motor. The pipe should be B-Class of Jindal / Hindustan/ Tata make only. The job including installation testing, commissioning of ceiling fan including making connection with existing wire.

Please Enable Macros to View BoQ information