Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹24.8 LAccepted-AOC P O RANGIA WARD NO 3 DIST KAMRUP ASSAM | KAMRUP | ASSAM | 781354 | L-1 | Accepted-AOC RATES ARE FOUND REASONABLE AND THE FIRM BEING L1 BIDDER | |
| 2 | L-2₹32.5 L+₹7.3 L (28.7%)Rejected-Finance KAHIKUCHI MARKET P O AZARA ASSAM 781017 | AZARA | KAMRUP | ASSAM | 781017 | L-2 | Rejected-Finance BEING L-2 BIDDER | |
| 3 | L-3₹32.7 L+₹7.4 L (29.2%)Rejected-Finance RANGIYA DIST KAMRUP ASSAM 781365 | BAKSA | ASSAM | 781365 | L-3 | Rejected-Finance BEING L-3 BIDDER | |
| 4 | L-4₹34.1 L+₹8.8 L (35.0%)Rejected-Finance STATION ROAD POST RANGIYA DIST KAMRUP ASSAM PIN 781354 | KAMRUP | ASSAM | 781354 | L-4 | Rejected-Finance BEING L-4 BIDDER | |
| 5 | L-5₹37.0 L+₹11.7 L (46.4%)Rejected-Finance C O DR UMASHANKAR SHARMA RANGIYA TINIALI NEAR RAIL GATE POST RANGIYA DIST KAMRUP ASSAM PIN 781354 | KAMRUP | ASSAM | 781354 | L-5 | Rejected-Finance BEING L-5 BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
16 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Rangia
GE Rangia C/O 99 APO Rangia
REPAIR MAINT OF CERTAIN MISC EXTERNAL WORKS AT TAMALPUR AND DARRANGA UNDER GE RANGIA
2023_MES_577488_1
8652/E8
Open Tender
Civil Works
Item Rate
180 days
TAMALPUR AND DARRANGA
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
GE Rangia
₹90,000
Yes
2 Mar 2023
27 Jan 2023
18 Feb 2023
27 Jan 2023
16 Feb 2023
4 Feb 2023
27 Jan 2023 - 30 Jan 2023
Amount
M&L for Dismantling Posts or Struts (Wood, Steel or RCC) of any Section, Posts embedded in cement concrete including taking out embedded portion and making good disturbed ground, complete all as specified and as directed
M&L for Demolition of Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.
M&L for Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.
M&L for Demolition of Brick Work/ Stone masonary built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed.
M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.
M&L for MS work as in Post and Struts in fencing including cutting tops to shape as directed, drilling holes, notching for wires, incl Flat iron for securing wire mesh, etc., conforming to Fe-290 Gde E-165 including all necessary drilling, bolting or riveting, etc., complete all as specified and as directed.
M&L for Dismantling Fencing Wire Mesh of any description, complete all as specified and as directed.
M&L for Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings, complete all as specified and as directed by Engineer-in-charge.
M&L for Steel Work in Tubular Trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240, complete all as specified and as directed.
M&L Cement Concrete 1:4:8, type D-2 (40mm graded aggregate) in Foundations, Filling and Mass Concrete, Foundation of Pole etc. including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed.
M&L for Brick Work with subclass ‘B’ bricks, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L for Brick Work with subclass ‘B’ bricks, Straight or Curved on Plan to any radius in half brick thick walls built in Cement Mortar 1:4, complete all as specified and as directed.
Fixing Only Chain Link Fencing including line wire, any mesh, size and type to any type of standards, rails, Straining bolts etc, including provision of binding wire, complete all as specified and as directed. NOTE: Chain link fencing will be paid at Supply Only rates and Cost of Mild Steel Binding Wire shall deem to be included in the quoted Unit Rate.
Supply Only Chain Link Fencing 100x100mm Mesh with 4.0mm dia complete all as specified and as directed.
M&L Mild Steel Screw Bolts (machine made) 11mm to 15mm diameter of Neck and length of Bolt not exc. 5 Cm with hexagonal or square heads at one end and screwed the other, or screwed both Ends, each screwed End to be fitted with Washers and one hexagonal or square Nut, complete all as specified and as directed.
S&F in-repair Galvanised 2 Strand, Steel Barbed Wire 2.24mm dia barbed with 2mm dia Barbs at 100mm spacings and straining and fixing to any type of Standard Rails straining Bolts, includ-ing securing or tying at crossings with and provision of Galvanised Mild Steel Wire, Staples or Steel Pins, etc., complete all as specified and as directed. NOTE: Cost of Mild Steel Binding Wire shall deem to be included in the quoted Unit Rate.
S&F of Mild Steel round Bars 10mm dia as Tie Bars, cut to length, bent to shape as required including cranking, bending, hooking Ends as required for Chain Link Fencing strengthing and fixing with Mild Steel Bolts, Nuts,etc. in Fencing Post, complete all as specified and as directed.
M&L for Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed.
M&L for Rendering or Bedding Layer 10mm thick in Cement Mortar 1:3 on Walls, etc. for fixing Tiles as Skirtings, Dados, etc, complete all as specified and as directed.
M&L for Glossy finished Chequered Cement Concrete Coloured Tiles 300x300x25mm thick in Floors, Paths, etc., set, jointed and pointed in Neat Cement Slurry in Floors with Grey Cement and Pigment, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.
M&L for providing non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match complete all as specified as directed. Note - Screed bed will be measured to paid seperately.
M&L for providing mat finished coloured (Stone Finish) Ceramic Tiles 350x450x7-8mm thick in Vertical Surface i.e. Dado, Skirting, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.
M&L for Rendering 15mm thick in Cement Mortar 1:4 on Fair faces of Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L for Rendering 15mm thick in Cement Mortar 1:4 on Fair faces of Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth using Extra Cement, complete all as specified and as directed.
M&L for providing Cement Concrete 1:3:6, type C-2 (40mm graded aggregate), 75mm thick as in sub-base of floor/path, Plinth Protection/Path etc., laid in alternate bays, finishing Concrete Surfaces Even and smooth without using extra cement, complete all as specified and as directed.
M&L for providing Cement Concrete 1:4:8, type D-2 (40mm graded aggregate), 100mm thick as in sub-base of floor/path, Plinth Protection/Hard-standing etc., laid in alternate bays, finishing Concrete Surfaces Even and fair, complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated or semi-corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks, complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat alkali resistant primer, complete all as specified and directed by Engg-in-charge.
M&L for preparation of old surfaces by grinding and cleaning, applying (Manually by roller) a priming coat of Apcoflor HFP 120 and applying Apcoflor LSC 3N XL/ SL 1 TC XL with trowel notch to cover some undulations and maintain avg. thickness of 2.0 mm and finally applying Scratch coat & top coat with three layers of approved shades including white line marking, complete all as specified and as directed by manufacturer. (Make- Nerolac/ Berger/ Asian Paints)
M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Black Japan Paint over a Red Oxide Primer, complete all as specified and as directed.
M&L preparing new or previously untreated Steel and Iron Surfaces of any description, not exceeding 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
M/s Nice Traders
M/S NARAYAN ENTERPRISE
M/S KIRAN ENTERPRISE
M/S S.S. Construction
SYED ATAUR RAHMAN
M/s DEBOJIT ROY
M/S SWMKHWR ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .