Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.8 LAccepted-AOC | L1 | Accepted-AOC Being lowst | |
| 2 | L2₹34.1 L+₹1.1 L (3.40%)Rejected-Finance | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹34.2 L+₹1.2 L (3.63%)Rejected-Finance | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹35.5 L+₹2.5 L (7.65%)Rejected-Finance ROOM NO D 297 PART III GANESH MURTI NAGAR CUFF PARADE ROAD COLABA MUMBAI 400005 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Being not lowest | |
| 5 | L5₹36.8 L+₹3.8 L (11.5%)Rejected-Finance | L5 | Rejected-Finance Being not lowest |
| Sl No | Description | Qty | Unit | Anil Industrial Corporation L6 | SN CONSTRUCTION L7 | HINDUSTAN BUILDERS L8 | Shetty Construction Co L2 | SHREE SHIV SHANKER ENTERPRISE L5 | Sri Krishna Construction L3 | GANGAJAL L4 | Nagma Enterprises L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed. | 150 | Sqm | 55 ₹8,250 | 90 ₹13,500 | 25 ₹3,750 Lowest | 50 ₹7,500 | 40 ₹6,000 | 150 ₹22,500 | 47 ₹7,050 | 60 ₹9,000 |
| 2.00 | M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and directed. | 180 | Sqm | 25 ₹4,500 Lowest | 140 ₹25,200 | 25 ₹4,500 Lowest | 40 ₹7,200 | 25 ₹4,500 Lowest | 150 ₹27,000 | 37 ₹6,660 | 70 ₹12,600 |
| 3.00 | M&L for of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed. | 200 | Sqm | 175 ₹35,000 | 150 ₹30,000 | 25 ₹5,000 Lowest | 40 ₹8,000 | 170 ₹34,000 | 150 ₹30,000 | 55 ₹11,000 | 80 ₹16,000 |
| 4.00 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land, complete all as specified and directed. | 3 | Cum | 333 ₹999 | 180 ₹540 | 200 ₹600 | 250 ₹750 | 250 ₹750 | 300 ₹900 | 125 ₹375 Lowest | 200 ₹600 |
| 5.00 | Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6, complete all as specified and directed. | 3 | Cum | 3,456 ₹10,368 Lowest | 4,400 ₹13,200 | 4,000 ₹12,000 | 4,500 ₹13,500 | 3,800 ₹11,400 | 4,000 ₹12,000 | 3,700 ₹11,100 | 4,000 ₹12,000 |
| 6.00 | Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land, complete all as specified and directed. | 300 | Sqm | 33 ₹9,900 | 10 ₹3,000 Lowest | 15 ₹4,500 | 10 ₹3,000 Lowest | 10 ₹3,000 Lowest | 15 ₹4,500 | 17 ₹5,100 | 10 ₹3,000 Lowest |
| 7.00 | Material and labour for 15 mm thick in CM 1:6 plaster in layer on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, complete all as specified and directed.by Engr-in-Charge. | 200 | Sqm | 234 ₹46,800 | 150 ₹30,000 | 150 ₹30,000 | 220 ₹44,000 | 250 ₹50,000 | 150 ₹30,000 | 185 ₹37,000 | 140 ₹28,000 Lowest |
| 8.00 | Material and labour for 10 mm thick in CM 1:4 Plaster in single layer of on other than fair faces of concrete surfaces in wall (internal surface) and finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. | 180 | Sqm | 199 ₹35,820 | 140 ₹25,200 | 100 ₹18,000 Lowest | 200 ₹36,000 | 200 ₹36,000 | 200 ₹36,000 | 175 ₹31,500 | 120 ₹21,600 |
| 9.00 | Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shape (Company Depot Tinted) with silicon additives @ 1.43 liter/10Sq m over and including priming coat of exterior primer applied @ 0.90 liter /10Sqm over new surface authorized applicator only including use of scaffoldings, complete all as specified and directed. | 200 | Sqm | 67 ₹13,400 | 60 ₹12,000 | 75 ₹15,000 | 70 ₹14,000 | 110 ₹22,000 | 100 ₹20,000 | 47 ₹9,400 Lowest | 55 ₹11,000 |
| 10.00 | Material and Labour for old plastered or unplastered surface of wall including cornices etc. by washing, rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coatsfor applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shape (Company Depot Tinted) with silicon additives @ 1.43 liter/10Sq m over and including priming coat of exterior primer applied @ 0.90 liter /10Sqm over old surface authorized applicator only including use of scaffoldings, complete all as specified and directed. | 200 | Sqm | 67 ₹13,400 | 60 ₹12,000 | 75 ₹15,000 | 70 ₹14,000 | 110 ₹22,000 | 100 ₹20,000 | 47 ₹9,400 Lowest | 50 ₹10,000 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
22 Nov 2025, 6:00 pmClosed
Kameshwar Prasad, IDSE, EE
GE(West), Colaba, Mumbai - 400 005
REPAIR/MAINTENANCE OF PLUMBING, JOINERY, FLOORING AND OTHER B/R WORKS IN AREA-V UNDER AGE B/R (CENTRAL) OF GE (W) COLABA MUMBAI
2025_MES_738004_1
8132/E8
Open Tender
Civil Works
Item Rate
180 days
GE(West), Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (W) Colaba, Mumbai
₹1 L
Yes
15 Dec 2025
31 Oct 2025
24 Nov 2025
31 Oct 2025
22 Nov 2025
15 Nov 2025
Amount
M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed.
M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and directed.
M&L for of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land, complete all as specified and directed.
Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6, complete all as specified and directed.
Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land, complete all as specified and directed.
Material and labour for 15 mm thick in CM 1:6 plaster in layer on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, complete all as specified and directed.by Engr-in-Charge.
Material and labour for 10 mm thick in CM 1:4 Plaster in single layer of on other than fair faces of concrete surfaces in wall (internal surface) and finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shape (Company Depot Tinted) with silicon additives @ 1.43 liter/10Sq m over and including priming coat of exterior primer applied @ 0.90 liter /10Sqm over new surface authorized applicator only including use of scaffoldings, complete all as specified and directed.
Material and Labour for old plastered or unplastered surface of wall including cornices etc. by washing, rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coatsfor applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shape (Company Depot Tinted) with silicon additives @ 1.43 liter/10Sq m over and including priming coat of exterior primer applied @ 0.90 liter /10Sqm over old surface authorized applicator only including use of scaffoldings, complete all as specified and directed.
Material and Labour for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat of wall putty over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed.
M&L complete removal of old decorated surface by washing rubbing down and stopping of distempered and painted surfaces of walls and applying two coat of distemper oil emulsion over a coat of primer white or tinted, complete all as specified and directed.
Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame), complete all as specified & directed.
Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame), complete all as specified & directed.
S&F for aluminum section for door and window, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs cleats rollers, handles, loking arrangement etc. including all accessories such all glazings clips and rubber bandings for fixing glass panes in frame complete all as specified. Note:- (i) Glass panes will be measured & paid separately. (ii) The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately. (iii) windows all around will be sealed with silicon sealant.
S&F aluminum grill of 6mm thick bars of opening as per design No 103 of fixed with aluminum channel F fixed in position with screw, complete all as specified and directed.
M&L for 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane, complete all as specified & directed.
S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed.
S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.
S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides, complete all as specified and directed.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardanand fixed in position with MS holdfast/lugs/SSdashfasteners of required dia and length, complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
All as per item No. 21 but of Frame size 50 x 100 mm, complete all as specified and directed.
S&f A Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S&F Aluminium anodised, barrel tower bolts 200 mm of ex truded section and fixed, complete all as specified and directed.
S&f aluminium alloy anodised hinge 100 mm fixed, complete all as specified and directed.
S&F MS butt hinges cold rolled meium weight of size 75 mm etc, complete all as specified & directed.
S&F 300mm long aluminnium alloy sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, four on bolt plate and two on staple, complete all as specified & directed.
S&F 150 mm long aluminium alloy handle cast type anodized, complete all as specified & directed.
S&f in repair double action spring hinges, mild steel with steel wire spring, stove enamelled, black, complete all as specified & directed.
M&L for preparing wooden old surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and directed.
M&L for preparing wooden new surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 (Brackets over 10kg each to be measured under `Structural Steel'), complete all as specified and directed.
M&L for prepparation of new steel surfaces of any description, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zink primer etc., complete all as specified and directed.
M&L preparing old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Dismantling roof (corrugated, semi corrugated etc) sheets in roof coverings including ridges, complete all as specified and directed.
S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall 2 mm thickness etc, complete all as specified and directed.
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping, complete all as specified and directed.
S&F in repair 18 mm thick marine plyboard laminated of any coulour with high glossy acrylic sheet of 1.5 mm thick grade I as per IS 14587 for frame and shutter for kitchen cabinet, complete all as specified and directed.
S & F in repair of medium weight, cold rolled mildsteel, SS finish, (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm,self-closing, complete all as specified and directed.
S & F in repair of stainless steel 304 electro-polished for corrosion resistance modular thali holder / basket having size of 42 x 58.50 x 20 cm including telescopic drawer channel having weighing capacity of 6 kg, complete all as specified and directed.
S & F in repair of stainless steel 304 electro-polished for corrosion resistancemodular cup & saucer holder / basket size of 52 x 53.5 x 10 cm with telescopic drawer channel having weighing capacity of 4kg, complete all as specified and directed.
S & F in repair of round stainless steel cabinet/drawers handlers dia of 27mm, complete all as specified and directed.
S&F in repair stainlesss steel modular perforated cutlery basket SS 304 size size of 52x48.5x10 cm with telescopic drawer channel having weighing capacity of 6 kg, complete all as specified and directed.
S&F in repair grain trolley SS 304 with telescopic drawer channel having weighing capacity of 6 kg, complete all as specified and directed.
S&F in repair of stainless steel hanging spice rack having three shelf spaces length of 500 mm, complete all as specified and directed.
Taking down kitchen cup board/cup board any type incl fitting and fixture, complete all as specified and directed.
S&F in repair for continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm, complete all as specified and directed.
Supply & Fixed of 18 mm thick Both Side pre laminated HDHMR Board of any colour, Matt surface finish , grade I as per IS 14587, for frame and shutter with 18 mm wide pvc strrips lipping for kitchen cabinets complete including dismentling any type old board, complete all as specified and directed.
S & F of round stainless steel cabinet/drawers handlers dia of 27mm, complete all as specified and directed.
S&F magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified and directed.
Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced, complete all as specified and directed.
Material and labour for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete, complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 15 mm bore, complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 20 mm bore, complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth (concrete or stone wall), complete all as specified and directed.
Supply & fixing UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc, complete all as specified and directed.
Supply & fixing UPVC pipes out side dia 20 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc, complete all as specified and directed.
S&F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 15 mm bore, complete all as specified and directed.
S&F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 20 mm bore, complete all as specified and directed.
Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 15 mm bore, complete all as specified and directed.
Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 20 mm bore, complete all as specified and directed.
Supply & fixing in repairs vitreous china white wash basin flat back size 550 x 400mm including coupling 32mm dia , waste pipe and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand, complete all as specified and directed.
S&F in repair wash hand basin table top of size 425x340x175 mm vitrous china including, waste copling & PVC waste pipe of 32mm dia etc, complete all as specified and directed.
Supply & fixing in repair for pillar taps cost copper alloy fancy type with capstan head, chromium plated screwed down high pressure with or fly nuts screwed for 15 mm bore iron pipe and fixed, complete all as specified and directed.
Supply & fixing in repair Chromium plated brass angle valve for 15mm bore pipe, fixed, complete all as specified and directed.
Supply & fixing in repair, two way angle valve cock chromium plated brass fancy type bore 15mm, complete all as specified and directed.
Supply & fixing in repairs plastic seat cover black/white of EWC including fixing divice and Chromium plated nuts, complete all as specified and directed.
Supply & fixing in repair vitreous china wash down water closet of Pedestal pattern white including seat cover making connection to trap and to flushing pipe etc complete and making good to floor, complete all as specified and directed.
S&F in repair vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe etc complete and making good to floor, complete all as specified and directed.
Supply & fixing in repair sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60 cm long, complete all as specified and directed.
Supply & fixing in repair CP brass toilet paper holder, superior quality, complete all as specified and directed.
Supply & fixing in repair CP brass, soap dish, superior quality, complete all as specified and directed.
Supply & fixing in repair Health foucet including PVC pipe 1.50m long with brass nuts for EWC, complete all as specified and directed.
Supply & fixing in repair PVC flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket, complete all as specified and directed.
Supply & fixing in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, complete all as specified and directed.
Supply & fixing in repairs Waste pipe, complete all as specified and directed.
S&F in repair bib taps 15mm bore cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
S & F in repair Ball valves for 20 mm bore pipe high pressure of PTMT with epoxy coated Aluminium rod &highdensity plastic ball screwed for iron pipe and fixed, complete all as specified and directed.
S & F in repair Ball valves for 25 mm bore pipe high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm incl coupling fixed, complete all as specified and directed.
S&F in repairs sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm incl coupling, fixed, complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.
S&F for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore, complete all as specified and directed.
S&F for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 75 mm bore, complete all as specified and directed.
S&F for PVC (SWR) bends any radius, 110 mm bore, complete all as specified and directed.
S&F for PVC (SWR) bends any radius, 75 mm bore, complete all as specified and directed.
S&F for PVC (SWR) branch piece, single (single Y) equal or unequal radius, 110 mm bore, complete all as specified and directed.
S&F for PVC (SWR) branch piece, single (single Y) equal or unequal radius, 75 mm bore, complete all as specified and directed.
S&F for PVC (SWR) branch piece, single (single T) equal or unequal radius, 110 mm bore, complete all as specified and directed.
S&F for PVC (SWR) branch piece, single (single T) equal or unequal radius, 75 mm bore, complete all as specified and directed.
S&F for PVC (SWR) reducers, 110 mm bore, complete all as specified and directed.
S&F for PVC (SWR) reducers, 75 mm bore, complete all as specified and directed.
S&F for PVC (SWR) vent cowl, 110 mm bore, complete all as specified and directed.
Dismantling water storage tank exc 1000 & n’ exc 2000 ltr capacity, complete all as specified and directed.
M&L Rotational moulded polye thylene water storage tanks 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.
M&L Rotational moulded polye thylene water storage tanks 2000 ltr (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.
Dismantling water storage tank exc 2000 & n’ exc 5000 ltr capacity, complete all as specified and directed.
M&L Rotational moulded polye thylene water storage tanks 5000 ltr (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.
S&F of in repair Gun metal gate valve 15 mm dia with iron wheel head screwed both ends for iron pipe and fixed in position, complete all as specified and directed.
Supply & fixing in repair gate valves (brass insert), for 20 mm bore pipe, complete all as specified and directed.
Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed.
M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane, complete all as specified and directed.
M&L for 3mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square exc 0.5 sqm in each pane, complete all as specified and directed.
Supply and fixing in repair 10 to 12 mm thick Toughned glass as in door shutters, plateform partition including necessary cutting to shape, drilling holes as reqd, jointing cleats, glazing clips, ruber neoprene packing, Stainless steel fittings such as handle 2 nos, 100mm hinge 3 nos, lock including keys 1 set, Stainless steel snap beading & screws, complete all as specified and directed.
S&F in repair Door closer Aluminium extrdued body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.
S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
S&F for in repairs Stainless steel plate rack (utensil rack) of size (1100 mm x 900 mm) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts fixed, complete all as specified and directed.
Dismantling, stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.
Material and Labour for Granite stone best quality (of any type) tiles 18- 20 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.
Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish, complete all as specified and directed.
M&L for PCC type B-1 1:2:4 (20 mm graded stone aggregate) for leveling course finishing even and rough to receive the tiles, complete all as specified and directed.
M&L for Chequered cement concrete tiles with grey cement and no pigments 200 mm x 200 mm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors including screed bed or beddind layer of 15 mm mortar thick CM 1:6, complete all as specified and directed.
Material and Labour for first and premium quality of non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile excedding 0.06 sqm but n. excedding 0.11 sqm in floors etc set and joimted in neat cement sluury and pointed in white or coloured cement to match and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.
Material and Labour for first and premium quality of Glazed ceramic coloured tiles in vertical surface 350x 250x7 mm/450x600x7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed.
Material and Labour for Vetrified ceramic tiles Dark shade 7 to 8mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc and jointed in neat cement slurry and pointed in whitebor coloured cement (and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.
Material and Labour for Vetrified ceramic tiles Dark shade 7 to 8mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sq.m in vertical surfaces etc and jointed in neat cement slurry and pointed in whitebor coloured cement over and including 10 mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed.
Material and Labour for heavy duty outdoor vitrified tiles dark or light shade 15 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.
S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed.
Dismantling of ceilig board (Plup insulation etc) or insulation board any thikness including cover fillet and grid frame work, complete all as specified and directed.
Supply and fixing for 12 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work, complete all as specified and directed.
Supply and fixing for 4 mm thick veneered desinger natural wood grain sheet fixed with adhesive as per manufactrue instruction to plywood work, complete all as specified and directed.
Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and directed by Engr In Charge.
M&L for anodised aluminum snap grid frame work for false ceiling incl1.6mm hanger rod, complete all as specified and directed by engr in charge.
Material and Labour for E-board tiles ceiling on GI powder coated channel/Tee/Grid of frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B-0 / Cement mortar 1:3, complete all as specified and directed with following:- (a) Material and Labour for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of of size 25 x 25 mm (b) Supply and fixing 0.9 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners (c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders with GI wire. (d) Supply and fixing E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE.
Supply and fixing for Plain fillets of second class hard wood, square or rectangular in section, clean sawn, wrought, secured with nails or brads; sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm, complete all as specified and directed. sample as approved by GE.
Supply & Fixed in repair 0.5 to 1 mm thickness 3D acrylic washable wall papers fixed with adhsive as per manufacture instruction as in ceiling/coloumns and in vertical surface complete all as specified and directed and approved sample as kept in GE Office.
Material and Labour for French polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE, complete all as specified and directed.
Demolition/ taking down existing roof treatment incl PCC pedding by picking sweeping, cleaning and washing down with water to remove dust,durt etc and brushing neat cement slurry @ 3 Kg/sqm, complete all as specified and directed.
M & L for plain cement concrete padding 1:2:4 type B-0 of average thickness 25 mm top surface of pain cement concrete padding shall be furnished even and smooth without using extra cement, complete all as specified and directed.
M & L for 15 mm thick screed bedding CM 1:4, complete all as specified and directed.
M & L for applying Bituminious primer on roof surface conforming to IS-3384 bof 1986 @ 0.70 Kg/sqm and ap[plying APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3 mm thick reinforced with non-woven polyster matt laid on primed surface by torch application complete all as specified with overlap of 100 mm overlap to be thermo fushed by flame, complete all as specified and directed.
M & L for one coat of aluminium paint at the rate of 100 gms/sqm as per manufacturer instruction over bitumin ious layer, complete all as specified and directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
Demolition and breaking up drain pipes (SGSW, AC or RCC, CI) of internal dia 300 mm set in cement mortar, complete all as specified and directed.
M&L For Concrete bed to drain pipes 300 mm including forming cradles cement concrete type C-2 1:3:6, complete all as specified and directed.
M&L Reinforced concrete pipes 300 mm dia, class NP3, laid and jointed complete with collars, complete all as specified and directed.
S&F Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire n exc 4 kg (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement, complete all as specified and directed.
S&F Polycarbonate bird spike min length 300mm hight 110mm, complete all as specified and directed.
Shetty Construction Co (BID ID -3480342)
Sri Krishna Construction (BID ID -3477476)
GANGAJAL (BID ID -3480428)
SHREE SHIV SHANKER ENTERPRISE (BID ID -3480493)
Anil Industrial Corporation (BID ID -3476753)
SN CONSTRUCTION (BID ID -3479075)
HINDUSTAN BUILDERS (BID ID -3479465)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
8132TenderPages.pdf
Tender Documents • 1.61 MB
BOQ_826355.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .