Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-AOC | ₹4.2 L | L1 | Accepted-AOC Lowest rate |
| 2 | L2₹4.2 LRejected-Finance | ₹4.2 L | L2 | Rejected-Finance Highest rate |
| Sl No | Description | Qty | Unit | MR.P.ARUNKUMAR, CONTRACTOR L2 | BALASUBRAMANIAN STORE L1 |
|---|---|---|---|---|---|
| 1.00Providing Paver Block | |||||
| 1.01 | Earth work Excavation in all classes of soil such an hard stiff clay block cotton soil including all cost and conveyence and all labour charges etc complete. | 9.2 | Cum | 207 ₹1,904.40 | 197.5 ₹1,817 |
| 1.02 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum. | 6.13 | m | 5,514 ₹33,800.82 | 5,504.1 ₹33,740.13 |
| 1.03 | Supply and erecting centering charges for all concreet works including all cost etc complete. | 85.85 | m | 375 ₹32,193.75 | 365 ₹31,335.25 |
| 1.04 | Cement concrete 1:3:6 mix using 20mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed. | 9.87 | m | 6,265 ₹61,835.55 | 6,255.2 ₹61,738.82 |
| 1.05 | Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) . | 31.07 | m | 2,033 ₹63,165.31 | 2,023.2 ₹62,860.82 |
| 1.06 | Providing and Laying Paver Block of 60mm thick approved design made out of 12mm and 6mm HBGS chips in M30 mix properly cured to attain the required strength, Laying and interlocking block and well compacted using 1-3 ton capacity compressor, the cost inclusive of all materials for manufacturing, interlocking block loading transportation to work site unloading and labour charges for fixing over Sand bed of 30mm thick & Joints filling using compressor of 1-3 ton capacity including hire and fuel charges for compressor and all other incidental charges etc complete. | 310.69 | m | 713 ₹2.2 L | 703.1 ₹2.2 L |
| 1.07 | Painting two coats over New iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete | 47.01 | m | 163 ₹7,662.63 | 153.5 ₹7,216.04 |
Tender Value
₹5 L
EMD Value
₹5,000
Closing Date
18 Dec 2025, 4:00 pmClosed
BDO (B.pt), Radhapuram
Block Development Office, Radhapuram
Providing paver block at Koodankulam East street in Koodankulam panchayat of Radhapuram panchayat Union
2025_RDTN_630770_1
SFC 2025-2026
Open Tender
Civil Works
Block Development Office, Radhapuram
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹5,000
23 Dec 2025
10 Dec 2025
18 Dec 2025
10 Dec 2025
18 Dec 2025
10 Dec 2025
Amount
Providing Paver Block
Earth work Excavation in all classes of soil such an hard stiff clay block cotton soil including all cost and conveyence and all labour charges etc complete.
Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.
Supply and erecting centering charges for all concreet works including all cost etc complete.
Cement concrete 1:3:6 mix using 20mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.
Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .
Providing and Laying Paver Block of 60mm thick approved design made out of 12mm and 6mm HBGS chips in M30 mix properly cured to attain the required strength, Laying and interlocking block and well compacted using 1-3 ton capacity compressor, the cost inclusive of all materials for manufacturing, interlocking block loading transportation to work site unloading and labour charges for fixing over Sand bed of 30mm thick & Joints filling using compressor of 1-3 ton capacity including hire and fuel charges for compressor and all other incidental charges etc complete.
Painting two coats over New iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete
MR.P.ARUNKUMAR, CONTRACTOR (BID ID -1537702)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_754296.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_754296.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid