Construction of Samajik Sabhagruh (For SC / ST) at Samode Tal.Sakri Dist.Dhule

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting Etcetera complete. (Lift upto 0.00 to 1.50 metre) By Manual Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting Etcetera complete. (Lift upto 1.50 metre) By Manual Means

Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with Crushed sand/grit, ramming, watering Etcetera complete.

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish Indian Standards to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing and laying in situ /Ready Mix cement concrete Mix-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions Etcetera including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish Indian Standards to be provided (Excluding reinforcement and structural steel) Etcetera complete, with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish Indian Standards to be provided and curing Etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish Indian Standards to be provided and curing Etcetera complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing and laying Cast in situ/Ready Mix cement concrete Mix-20 of trap/ granite /quartzite/ gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetra complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetra complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish Indian Standards to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete.With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing and fixing in position Thermo Mechanical Treated - FE - 500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches Etcetera as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing second class Burnt Brick masonry with conventional/ Indian Standards type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering Etcetera Complete.

Providing second class Burnt Brick masonry with conventional/ Indian Standards type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding Etcetera Complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 centimetre to 20 centimetre including watering and compaction etcetra complete.

Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre Layers including watering and compacting Etcetera complete.

Providing internal cement plaster 20 milimetre thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing Etcetera complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etcetra complete.

Providing and fixing mild steel grill work for windows, ventilators, Etcetera 15 Kilogram per One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 milimetre at weight 0.637 Kilogram per One Running Metre with window frame bottom track section 92 x 31.75 x 1.30 milimetre at weight 1.070 Kilogram per One Running Metre Top and side track section 92 x 31.75 x 1.30 milimetre at weight 0.933 Kilogram per Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 Kilogram per One Running Metre Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 Kilogram per Running metre and handle and top section 40 x 18 x 1.25 milimetre at weight o.417 Kilogram per Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetra, complete. With colour Anodising with box

Providing and fixing machine cut mirror polished 18 milimetre to 20 milimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges Etcetera complete. One side polish

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming to Indian Standards 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing Etcetera complete.

Providing and laying vitrified mirror / glossy finish tiles having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming to Indian Standards 15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing Etcetera complete

Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 milimetre x 40 milimetre x 5 milimetre with oil painting, Etcetera complete.

Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35 milimetre thick style and rail with 25 milimetre thick panels with openable fan light as per detailed drawings. Excluding the door frame 60 milimetre x 100 milimetre stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame)

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 40 milimetre thickness of having a strength of 200 Kilogram per Square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 milimetre thick including skirting joints and cleaning Etcetera complete.

Providing and fixing Polynvinyl Cloride Rain water pipes of 110 milimetre outer diameter and having wall thickness of 2.2 to 2.7 milimetre confirming to Indian Standards 13592-1992 including proper rainwater receiving recess with Polynvinyl Cloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 milimetre to 40 milimetre from face of wall a fixing with clips of approved quality and One Number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement Concrete or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the Polynvinyl Cloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge Etcetera complete.

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days Etcetera complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etcetra complete.

Providing and laying Cast in situ/Ready Mixcement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish Indian Standards to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Testing Charges Sand : Silt Factor

Crush Metal and Hand Broken Metal : Water Absorption, Specific Gravity, Impact Value / Crushing Value

Sieve Analysis

Flakiness Index and Elongation Index

Stripping Value

Murum : P.I. Value

Cement Concrete : Compressive Strength (Set of 3 Cubes)

Steel : Yield Strength / Elongation Yield Stress Above 16 mm

Royalty for Sand

Royalty for Other Material

Please Enable Macros to View BoQ information