Shifting of 400 KVA and 630 KVA T/f from exiting plinth to newly constructed Plinth along with other required accessories in special M And R at 33/11 KV Civil line S/s under EUDD Mayohall, Prayagraj.

Amount

Shifting of 400 KVA & 630 KVA T/f from exiting plinth to newly constructed Plinth along with other required accessories in special M & R at 33/11 KV Civil line S/s under EUDD Mayohall, Prayagraj.

Earthing of transformer body and neutral by lowering of GI pipe of size 1.50” dia 40’ deep, connecting with GI Strip of size 50x6 mm with clamp. (All materials will be arranged by the conctractor)

Replacement of damged LT cubical box along with all accessories.

Earthing of neutral and body LT cubical box by providing M.S. earthling rod and connecting with G.I. Strips of size 50x6 mm with clamp (All material except earthing rod will be arranged by the conctractor)

Construction of retaining wall, fabrication and erection of wiremesh fencing 5'. Height with locking arrangement including grouting of fabricated MS Angle 50x50x6 mm, painting of fencing and support with all material around 11/0.4 kV substation. The fencing shall be made of 50x25 mm 10 SWG rectangular type of wiremesh. Wiremesh shall be fixed on panel made of 40x40x5 mm MS Angle Iron. The wiremesh on panel will be supported by 25x3 mm MS Flat on all the bracings diagonally and 40x5 mm MS Angle iron horizontally at the centre of the panel. The panel will be jointed by bolts and nuts of appropriate size with each other and on the main support of the corner. (All materials will be arranged by the conctractor)

Laying of L.T. cable of size 3.5x240/3.5x400 sq mm.from LT cubical box to LT Pole and HT laying cable 3x120sq mm XLPE suitably connection at both ends. (All materials will be provided by the department)

Errection of 400/630 KVA T/F along with HT/LT connection.

Dismentalling of all the HT/LT connections & earthing of old 11/.4 KV 400 KVA & 630 KVA Transformer.

Replacement /Installation of G.O. Switch/D.O. fuse set as per requriment. (All materials will be provided by the department).

Fixing of Heat Shrink cable type end Terminations suitable for 11 KV, 3x120 sq mm XLPE cable. (All materials will be provided by the department including jointing kit).

Outdoor/indoor jointing kit

D N S ENTERPRISES

GANGA ELECTRICALS