SPL REP TO EXISTING REPLACEMENT OF HIGH TENSION (HT) AND LOW TENSION (LT) OVERHEAD CONDUCTOR TO HIGH TENSION AND LOW TENSION XLPE UNDERGROUND CABLE AT TATTOO GROUND UNDER GE 970 EWS

Amount

Supply, laying and testing XLPE insulated armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor cross sectional area 16Sqmm 2 Core, complete all as specified and directed by Engr in Charge.

Replacement of junction box made out of 1.6mm thick MS sheet front openable, weather & vermin proof incl painting two coats of synthetic enamels paint over coat of red oxide primer. Connection box shall be suitable for housing & incl AI bus bar 25 Amps Cap 2 Nos. MCB SP6 Amps-01 No and having provision of cable hole in bottom for two to three cables of size 10 Sqmm 2 core armoured cable connection boxshall be fitted on street light pole and fixing arrangements i.e MS clamps etc deemed to be provided by the contractor, size of box 200x150x100mm

Supply, laying and testing XLPE insulated armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor cross sectional area 35Sqmm 3.5 Core, complete all as specified and directed by Engr in Charge.

Supply, laying and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, HT electric power cable (heavy duty) with stranded aluminium conductor, 11000 volts (earthed system) grade cross sectional area 50 sqmm 3 core complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing XLPE insulated armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor cross sectional area 50Sqmm 3.5 Core, complete all as specified and directed by Engr in Charge.

Dismantling of old UNSV overhead HT and LT transmission line incl ACSR conductor and cross arms and any no of conductors of any size/ any span complete all as specified and directed by Engr-in-Charge.

Dismantling of old UNSV concrete pole /struts any size and make complete all as specified and directed by Engr-in-Charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out any type of soil for laying of cable, errection of pole, stays etc complete all as specified and directed by Engineer-in-charge.

Returning filling in (soil) including spreading levelling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed by Engineer -in-charge.

Removal of excavated soil to a distance n.exc 50 m and depositing where directed at a level not exc 1.5 mtr above the ground level/starting point compalete all as specified and directed by Engineer -in-charge.

River sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and streching the cable, complete all as specified and directed by Engr-in-Charge. Note :- For payment purpose punned thickness shall be measured

Brick well burnt locally available sub class "B" laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable all as directed.

M/S Noor Mohammad Shalla