REPAIR TO CONNECTING PATH, DRAIN, BOUNDARY WALL AND OTHER ALLIED WORKS AT 274 TRANSIT CAMP KHANPUR UNDER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10

Amount

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles complete all as specified and as directed

M&L for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, copings, holdfast and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:4) on stone masonry surfases or other than fair faces of brick work or concrete surfaces with using water proofing compound and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid seperately.

M&L for rendering 15 mm thick in CM (1:6) on stone masonry surfases or surfaces other than fair faces of brick work or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only integral waterproofing compund all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant priming coat complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bond distemper over a coat of primer all as specified and as directed.

Demolition of cement concrete (reinforced) of any description in any position not otherwise specifically provided for and removing demolished materials to a distance exceeding 250 Mtr but n exc 500 Mtr complete all as specified and as directed.

M&L for RCC type A-1, 1:1/2:3 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs, Chajjas, shelves and similar work, including required necessary form work complete all as specified and as directed.

Hacking out old broken glass (any thickness, size quality of description) from wooden frame and S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane, glazed with putty or fixed with beads complete all as specified and as directed.

Hacking out old broken glass (any thickness, size quality of description) from metal frame including punching or drilling out old glazing pins/sprigs clips S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane, glazed with putty or fixed with existing window complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premishes complete all as specified and as directed

M&L for 75 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded aggregate) as in subbase of interlocking tiles complete all as specified and as directed

M&L for 50 mm thick sand cushioning. Spreading and levelling in layers n exc.25 cm thick, well ramming including watering as required complete all as specified and as directed

M&L for Machine pressed precast concrete Interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete all as specified and as directed

S&F in repairs 20mm dia Ball brass Valves, high pressure, with polythene float and fly nut complete, screwed for Iron pipe or brass ferrule complete all as specified and as directed

S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and as directed

S&F in repair vitreous China squatting pan ‘Orissa pattern’, size 580 x 440 white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe etc (excluding flushing cistern and flush pipe) including making good to floor complete all as specified and as directed

S&F in repair vitreous china wash hand basin, white flat back of size 550mmX400 mm excluding chain and plug and porcelain stopper but including brackets waste coupling, waste pipe, PVC connections 600 mm long, pillar tap cast copper alloy with capstan head chromium plated fancy type round head fixed to 15 mm bore dia of pipe, fixed as in repairs complete all as specified and as directed.

S&F in repairs PVC water tank covers screw head type including four No of PVC nut and bolt in existing PVC water taks of cap 500 ltrs to 1000 ltrs cap with fixing arrangement complete all as specified and as directed

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position 500 Ltr capacity complete all as specified and as directed.

S&F in repairs sheet glass, 5.5 mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including beading fixed nails complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and as directed.

M&L for repairs to existing steel rolling shutters by repairing/welding/oiling/greasing to anchoring rod,springs,side guide channel etc incl dismantling existing steel rolling shutters of any width and refixing after making serviceable after adjusting springs complete all as specified and as directed

S&F in repairs Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling plain corrugated steel (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed

M&L for repair to existing steel door and window by welding/replacing hinges/handle or removing the steel door and window shutters from the frame and re-fixing after making serviceable complete all as specified and as directed.

S&F in repairs Plastic water closet seat, back, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs bib taps chromium plated cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified and as directed.

S&F in repairs 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated with crutch , screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 15mm dia Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly-nuts screwed for iron pipes and fixed complete all as specified and as directed.

S&F in repairs CP Connection 15mm size with nuts of length 450mm complete all as specified and as directed.

S&F in repairs CP Connection 15mm size with nuts of length 600mm complete all as specified and as directed.

S&F in repairs CP grating 100mm dia round hole/without hole fix on floor/ nahani trap fixed with cement paste complete all as specified and as directed.

S&F in repairs PVC waste pipe 32mm dia 60 cm long suitable for WHB/Sink complete all as specified and as directed.

Demolition and breaking up drain pipes (SGSW, AC, PVC or reinforced cement) set in cement mortor internal dia of pipe 100mm complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and as directed.

Dismantling of cast iron drain pipes & fittings, jointed in cement mortor and taking out of trench required internal dia of pipe 75 to 100mm complete all as specified and as directed.

S&F 100mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceiling or laid in floor incl MS clamp 40 x 6 mm flat iron and 12 mm dia round iron stays including bolts and nuts including securing to wall in PCC (1:2:4) and making good in cement mortar (1:3) complete all as specified and as directed.

All as per Srl. item No.43 above, but 75mm bore pipe.

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F in repairs CP Towel Rack 600mm long with lower hanger of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repairs vitreous chinaware wash down water closet pan padestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe antisyphonage pipe etc, including necessary 'P'/'S' traps as required complete all as specified and as directed.

M&L for mild steel TMT bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150 mm complete all as specified and as directed.

Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 200 mm complete all as specified and as directed.

M&L for concrete bed to 150 mm bore drain pipes in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregates including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

All as per Srl item No.54 above, but bore of pipe 200 mm.

M&L for providing reinforced concrete pipes, class NP2 laid and jointed complete with collars 150 mm dia (internal) laid in trenches & jointed etc complete all as specified and as directed.

M&L for providing reinforced concrete pipes , class NP2 laid and jointed complete with collars 200 mm dia (internal) laid in trenches & jointed etc complete all as specified and as directed.

De-silting of sewer line upto 200mm internal dia with connected manholes of any depth by mechanical device like super sucker machine, high pressure jetting machine/gantry machine. incl taking out debris, installation of adequate number of over pumping system leak proof stanching arrangement of upstream and downstream side of working length, temporary raising main etc for smooth flow of sewage system to avoid flood in the area. Supply of all material, labour, tool & plants temporary power connection with stand by generator set of capacity of at least 62.5 KVA, gas detector for air ventilators etc & provn of safety equipments as per guide lines laid in IS : 11972(1987)/(international standard), traffic control arrangement and proper lighting at night barricading display of sign boards, insurances of workmen & cleaning of site complete all as specified and as directed.

All as per Srl item No.58 above, but upto 300mm internal dia of sewage lines.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 m in depth for manholes & sewage lines and getting out in soft/loose soil complete all as specified and as directed.

All as per Srl item No.60 above, but depth exceeding 1.50 m and not exceeding 3.00 m.

S&F Fe-410 W (Gde E-250) quality - A Joist Channel angleor Tee section fixed independently, without connecting plate etc. cut to ordinary length including welding work complete all as specified.

M&L for preparation of new steel surfaces of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified.

Note :- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

M/S.M.S.Devi.Const.Co

bhumica construction co.

MAHABIR SINGH