Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.8 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹17.2 L+₹2.0 L (12.9%)Rejected-Finance | L2 | Rejected-Finance Other than L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
21 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tapan nauriyal, Lt Col, GE
Garrision Engineer, 864 Engr Wks Sec, PIN-913864, C/o 56 APO
CERTAIN REPAIRS TO B/R WKS FOR ZONE B AREA UNDER AGE BR-II GE 864 EWS AT BB CANTT SRINAGAR
2022_MES_559889_1
864/WS-46/2022-23
Open Tender
Civil Works
Item Rate
180 days
B B Cantt Srinagar
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹40,000
Yes
30 Dec 2022
26 Oct 2022
23 Nov 2022
26 Oct 2022
21 Nov 2022
9 Nov 2022
Amount
Taking down shutter of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed
Taking down shutter of any description n.exc 1.0 Sqm each, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster of any description on brick work or stone walls etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.
Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.
Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.
Demolition of cement concrete (unreinforced) as in ground floor and paving, not exc 15cm thick below or above ground level, complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.
Dismantling wall /ceiling boards of any description, fixed in any position with nails or screws, complete all as specified and directed.
Demolition of brick or or stone/boulder masonry, built in cement mortor including all quions, arche, 0pillars etc but excluding ashlars facings, dressed stonework and precast concrere articles complete all as specified and directed
M&L for brick work with sub class ‘B’ bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6, complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 5mm thick rendering in CM 1:3 as in ceiling, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for RCC 1:1.5:3, type B1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roof landing, balconies, deck slab and shelves and the like, complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.
Formwork for rough finished surfaces of concrete to sides and soffits of floor beams, roof beams, beams, haunchings, girder, lintels, cantilevers, shelves including supports overhangs etc. complete all as specified and directed
Formwork for rough finished surfaces of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs, horizontal or sloping and similar work exc 5cm but not exc 10cm wide, complete all as specified and directed.
M&L for vitrified ceramic tiles, 10mm (square/rectangular), area of each tile n.exc 0.36 Sqm, as in floor etc, set and jointed with neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed in CM 1:4, complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300x200x6-7mm thick, best quality as on skirting, dados, walls, vertical surfaces etc., set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.
M&L for non skid coloured ceramic tiles, 7-8mm thick (square /ractangular), area of each tile exc 0.06 Sqm but not exc 0.11Sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick in CM 1:4 screed bed or bedding layer, complete all as specified and directed.
M&L for non skid coloured ceramic tiles, 7-8mm thick (square/ractangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick in CM 1:4 screed bed or bedding layer, complete all as specified and directed .
M&L for granite work with 18mm thick slab, table rubbed and polished, as in steps, window cills, cooking platforms and the like in single piece, set in neat cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15mm thick screed bed or bedding layer in CM 1:3, complete all as specified and directed.
Moulding of sides of granite slab 16-18mm thick, complete all as specified and directed.
S&F 15mm bore GI water tubing, medium grade with all fittings and fixed to wall, floor and ceiling etc., complete all as specified and directed by Engineer-in-Charge.
S&F 20mm bore GI water tubing, medium grade with all fittings and fixed to wall, floor and ceiling etc., complete all as specified and directed by Engineer-in-Charge.
S&F anodised aluminium snap grid frame work for false ceiling of size 605mm x 605mm, complete all as specified and directed.
S&F 12mm thick Gypsum board as in ceiling / walls, fixed with screws, complete all as per manufacturer's instructions and directed.
S&F in repairs sink with drainage board, made of stainless steel 1.0mm thick, suitable for kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or including cast iron cantilever brackets of suitable size and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed.
S&F in replair plate rack of stainless steel of size 900mm x 750mm with steel shelves and hanging arrangments for utensil, complete all as specified and directed.
S&F in repais vitreous chine wash down water closet (pedestal pattern) white, complete including connection to drain pipe and to flushing pipe, anti-syphonage pipe etc., complete all as specified and directed.
S&F in repairs vitreous china squatting pan, Orissa pattern of size 580mm x 440mm white with including foot rests and including CI 'P' trap but excluding flushing cistern and flush pipe but including provision of PCC 1:4:8 type D-2 bedding, complete all as specified and directed.
S&F in replair vitreous china, white, wash hand basin, flat back of size 550mm x 400mm (Padestal pattern) including MS brackets and cutting for and pinning ends including 32mm dia PTMT waste coupling in full threaded (minimum weight 45gms) but excluding waste pipe, waste fittings etc., complete all as specified and directed
S&F in replair plastic water closet seat cover of any colour, closed pattern with recessed bottom cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
S&F in repairs PVC low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., complete all as specified and directed.
S&F CP jet spray including CP flexible pipe for EWC and fixed.
S&F in replair chromium plated health faucet, telephonic type with CP flexible arms 1.0 mtr long, suitable to fixed to 15mm bore CP angle valves, complete all as specified and directed.
S&F in repair chromium plated toilet paper holder fixed with brass screw, complete all as specified and directed.
S&F in replair centre hole mixer for mixing hot & cold water, suitable for wash hand basin, cast copper alloy with dual capstan head, chromium plated, fancy type, screwed down, high pressure with lettered Hot & Cold with long screwed shanks and fly nuts, screwed for iron pipe, suitable for 15mm bore, complete all as specified and directed.
S&F single lever wall mixture with non telephonic type 15mm bore, complete all as specified and directed by Engineer-ib-Charge.
S&F in repair shower rose, over head type, size 100x100mm, square in shape, single flow, complete all as specified and directed by Engineer-in-Charge.
S&F in repair hand shower (telephonic type), chromium plated with 900mm long 15mm bore chrome finish flexible pipe, complete all as specified and directed.
S&F in repair 15mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, complete all as specified and directed.
S&F in replair 15mm bore angle valve, cast copper alloy, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for union, complete all as specified and directed.
S&F in repair 15mm bore stop valve, cast copper alloy, chromium plated, fancy type, without shank and cup concealed type, screwed both ends for iron pipe or for union, complete all as specified and directed.
S&F in repair CP tubular towel rod, 60cm long between flange, complete all as specified and directed.
S&F in replair CP soap dish, heavy duty, fixed with cadmium plated brass screws, complete all as specified and directed.
S&F in repair for 3 tier Corner Glass shelf of size 300x300mm(Big), 200x200mm (Medium) & 150x150mm (Small) three set, with CP brackets and railing complete all as specified and directed
S&F in replair glass shelf assembly, consisting of 5.50mm thick sheet glass, 12cm wide with chromium plated brackets, guard and railing 60cm long, complete all as specified and directed
S&F in replair 32mm bore of discharge waste pipe with CP brass coupling of (Half or full threaded) (minimum weight 32mm-45gms), complete all as specified and directed
S&F PVC connection 15mm size, 450mm long with PTMT nuts, complete all as specified and directed.
S&F PVC flexible connection 15mm size of PTMT, 600mm long with flange nuts & washers, complete all as specified and directed.
S&F CP grating suitable for 75/100mm bore floor trap and fixed with white cement, complete all as specified and directed.
S&F 35mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed by Engineer-in-Charge.
S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement with all fitting and fixtures and fixed at site, complete all as specified and directed
S&F factory made solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS square tube and fixed at site, complete all as specified and directed.
S&F mortice latch with two levers (vertical type) brass body, complete all as specified.
S&F 30mm thick 2nd class hard wood glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) for window/ventilator, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I (Specifications) (2009), Section 8, Clause 8.24(b), complete all as specified and directed.
S&F in repair 18-19mm thick prelaminated partical board, interior grade, prelaminated both side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed .
S&F in repair 18-19mm thick block board, medium density, flat pressed single layer or three layers with BWR type adhesive, fixed with nails to timber frame work, complete all as specified and directed.
S&F 2nd class hard wood (hollock) plain fillets, square/ractangular or triangular in section, clean sawn, screw with nail, bull noised, splayed chamfered or rounded on one edge or face wrought, sec area exc 3.0 Sqcm but not exc 6.0 Sqcm as in cover fillet, complete all as specified and directed
S&F 100mm long butt hinges, medium weight, cold rolled, mild steel, complete all as specified.
S&F 75mm long butt hinges, medium weight, cold rolled, mild steel, complete all as specified.
S&F 150mm size aluminium handle, cast type, anodised, complete all as specified.
S&F 100mm size aluminium handle, cast type, anodised, complete all as specified.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified.
S&F 100mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified.
S&F 300mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed .
S&F floor door stoper of aluminium body and tongue anodised with land drawn steel spring overall length of cover plate 140mm, fixed with screws, complete all as specified and directed.
S&F in replair 300 long mild steel ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.
S&F 3mm thick ordinary quality sheet glass, glazing with oil putty in square not exc 0.50 Sqm each pane, complete all as specified and directed.
S&F 4mm thick figured glass, pin head type, ordinary quality and size and glazing with oil putty or beading in square not exc 0.50 Sqm each pane, complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed
S&F 40mm dia cupboard brass knobs, fixed with nut, screw and washer of milld steel, bright finished, complete all as specified.
S&F in replair 20mm dia decorative powder coated drapery curtain rod, bright finish including decorative side domes, brackets and minimum 8 Nos curtain rings Per RM length, complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall by using necessary filling compound of Altek/Birla white 1.5mm thick putty to obtain smooth/even surface using sand paper and applying two coats of oil emulsion distemper over a coat of primer, complete all as specified and directed
M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer, complete all as specified and directed.
M&L for preparation of new plastered ceilingn surfaces and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed
M&L for preparation of new surfaces of wooden or wooden based articles of any description, exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for wooden laminted flooring in strips of size 120cm long and 20cm wide and 6-8 mm thick, fixed with PVC sheet and cushion, complete all as per manufucterer's instructions and directed by Engineer-in-Charge. Make :- Pergo / Vista / Green Ply
S&F 15mm thick 1st class softwood australian wood panelling, fixed with tounged and grouded as wall panelling and including two coats of varnishing, polishing and prepration with sneezing, complete all as specified and directed
Dismantling plain or corrugated sheet of any gauge and thickness of roof covering etc, complete all as specified and directed.
S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' or 'J' type or cranked hook, bolts and washers in lieu of screws as in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed.
S&F 0.63mm thick plain, galvanised, mild steel sheeting as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) fixed with 'L' or 'J' type or cranked hook, bolts and washers in lieu of screws with grade of zinc coating 275, complete all as specified and directed
M&L for preparation of new surfaces of steel or iron of any description, exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engineer-in-Charge.
M&L for lagging to pipes 15mm bore used in internal water sup;ply or plumbing all round with, 25mm thick bounded minerals wool preformed 'SNAP OM' pipe sections of density 144 Kg/Cum confirming to IS 9842 reinforced with chicken mesh wire netting 25 gauge, 20mm msh and POP complete all as specified and directed
M&L for lagging to pipes 20mm bore used in internal water sup;ply or plumbing all round with, 25mm thick bounded minerals wool preformed 'SNAP OM' pipe sections of density 144 Kg/Cum confirming to IS 9842 reinforced with chicken mesh wire netting 25 gauge, 20mm msh and POP complete all as specified and directed
Dismantling cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from trenches, if required, complete all as specified and directed
M&L for 110mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed
All as per Srl item No. 92 above but 75mm bore pipe.
S&F stack clamp, made out of flat iron of size 50x5mm and 16mm dia round iron stays including bolts and nuts and screwing ends of stay to wall or roof for 75mm bore pipe, complete all as specified and directed
All as per Srl item No. 94 above but for 100/110mm bore pipe.
Dismantling trellis work (Jafri) in two way including taking as under of battens in trellis (posts and rails measured separately), complete all as specified and directed
M&L for 2nd class softwood, wrought, as in 40mm x 12mm laths (fixed straight or diagonally) in two way trellis work with 75mm spaces in the clear including 75mm x 50mm fillet (notched to take ends of laths) all around and fixed, complete all as specified and directed
S/F False ceiling KHATAMBAND pattern of approved design with orangamental wood work made out of Devdar wood including French polishing (two coat) on 12mm thick BWR plywood complete all as specified and directed Note : Plywood and scantling will be measured, paid separately
Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 250 ltr and n exc 500 ltrs) including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height all as directed
Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc500 ltr and n exc 1000 ltrs)including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height all as directed
S&F PVC SWR branch piece single equal or unequal 110mm
S&F PVC SWR branch piece single equal or unequal 75mm
S&F PVC(SWR) bends any radius 110mm.
S&F PVC(SWR) bends any radius 75mm.
M&L for 75mm thick PCC 1:4:8, type D2 (Using 40mm graded aggregate) as in sub base.
M&L for Chequred cement concrete tiles 30cmx30cmx25mm thick with hard glazed finish rubber topping with grey cement and no pigments over 20mm thick screed bed or bedding layer in cement mortor (1:6), set, jointed and pointed in neat cemet slurry complete.
Dismantling timber scantling 40sqcm and over in section in any postion complete all as specified and directed
M&L for 2nd class hard wood clean sawn scantling as in frame d work complete all as specified and directed
S&F 12mm thick plywood, grade BWR, type BB fixed with nails as in ceiling complete all as specified and directed
S&F 9mm thick plywood, grade BWR, type BB fixed with nails as in wall complete all as specified and directed
Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes of cpacity exc 250 lit but n.exc 500 lit etc complete all as specified and directed
Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes of cpacity exc 500 lit but n.exc1000 lit etc complete all as specified and directed
Alishan Builders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .