DAY TO DAY MAINT OF INTERNAL ELECTRIFICATION REPAIR MAINTENANCE OF INTERNAL WIRING, SUB MAIN WIRING, DB, EARTHINGS AND CONNECTED ITEMS AT KANJOLI LINE, DAYALBAGH AREA UNDER GE BHARATPUR

Amount

Identifying and rectifying the defects pertaining to internal electrification of any type and nature such as taking down defective switch/socket/ceiling rose/holders/fittings / fixtures any type, rectification of faulty electric circuits, tightening of loose connections, replacment of old u/s wiring/conduits/ casing caping & connections etc, complete all as specified and as directed by Engineer in Charge

Identifying/detecting defects in unserviceable wiring and rectifying the defects pertaining to internal electrification of any type and nature such as taking down defective MCBs SP /SPN/DPs/TPN any type, rectification of faulty due to loose connection in electric circuits, tightening of loose connections, replacement of U/S MCBs, U/S portion of conductor etc, complete all as specified and as directed by Engineer in Charge Note for Item No 1 to 2 :- (a) All T & P/Stationeries and labour team required comprising of Nos of trained electricians & helpers will be provided by the contractor daily, as directed. (b) Rep of the contractor will present in complaint cell & responsible for receiving & attending the complaints from 08.30 Hrs to 04.30 Hrs the time of lodging the complaint. In absence of rep of Contractor penal recovery as decided by GE shall be imposed & on contractor. (c) Cost of minor stores such as screws,clamps,insulation tapes,nuts/bolts, nail of required size etc shall be deemed included in the above quoted rate. However, major items such as switches, sockets, bell push, fan regulator etc shall be measured and paid separately under appropriate items of Schedule 'A'. (d) Complaints where complete replacement of circuit/point wiring required shall be measured under relevent item. (e) If contractor fails to rectify the complaint with in 24 hours after reciving, Rs 500/- per complaint will be penalised. (f) supply in replacement of material shall be measure and paid seprately under respective item.

Supply only in replacement Switch piano flush type 5 Amps single pole one way complete, complete all as specified and as directed by Engineer in Charge

Supply only in replacement socket outlet multipurpose suitable for 2/3 pin 5 amp flush type, complete all as specified and as directed by Engineer in Charge

Supply only in replacement ceiling rose surface type, 2-3 terminal 65x50mm, complete all as specified and as directed by Engineer in Charge

Supply only in replacement batten/angle type holder insulated body with back plate, complete all as specified and as directed by Engineer in Charge

Supply only in replacement bell push piano type 5 Amps, complete all as specified and as directed by Engineer in Charge

Supply only in replacement electric bell ding dong 230 volt AC, complete all as specified and as directed by Engineer in Charge

Supply only in replacement modular Switch piano flush type 6 Amps, 230 V AC single pole one way, complete all as specified and as directed by Engineer in Charge

Supply only in replacement modular Switch piano flush type 16 Amps, 230 V AC single pole one way, complete all as specified and as directed by Engineer in Charge

Supply only in replacement modular socket outlet with shutter multipurpose suitable for 2 pin and 3 pin 6 amp flush type, complete all as specified and as directed by Engineer in Charge

Supply only in replacement modular socket outlet with shutter multipurpose suitable for 6 pin 16 amp flush type, complete all as specified and as directed by Engineer in Charge

Supply only in replacement modular bell Switch 6 Amps, 220 V single pole, complete all as specified and as directed by Engineer in Charge

Supply only in replacement electronic modular fan regulator,Two module, electronic,step type and connection, complete all as specified and as directed by Engineer in Charge

Supply only in replacement MCB single pole 32/40Amps, 10KA, 230 volts 'C' series, complete all as specified and as directed by Engineer in Charge

Supply only in replacement MCB single pole 6 to 30 Amps, 10KA, 230 volts 'C' series, complete all as specified and as directed by Engineer in Charge

Supply only in replacement MCB TPN 63 Amps, 10KA, 230 volts 'C' series, complete all as specified and as directed by Engineer in Charge

Supply only capacitor 2.5 mfd 240V ISI mark complete all as specified and as directed by Engineer in Charge

Taking down carefully copper/aluminium point wiring (light, fan, bell,same board, independent or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of wall, floor & ceiling etc. complete all as specified and as directed by Engineer in Charge

Dismantlingof old U/S rusted main switch/DB of any size capacity and make complete all as specified and as directed by Engineer in Charge

M&L conceled point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipe size not less than 20 mm dia with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface and making good the disturbed surfaces of wall/ceiling by means of Wall putty and matching colour of existing wall, PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards/ sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed for the following :- (a) One light point controlled by one way switch.

(b) One fan point controlled by one way switch.

(c) One bell/buzzer point controlled by one push button.

(d) One 3 pin 6 Amp socket point outlet on the same board with other switches

(e) One 3 pin 6 Amp socket point outlet on the independent board

(f) One light point controlled by 2 way Switch

All as per item No 21 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified and as directed by Engineer in Charge

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in and including PVC casing and caping double locked box type with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly for the following :- (a) One light point controlled by one way switch.

(b) One fan point controlled by one way switch.

(c) One 3 pin 6 Amp switch socket outlet on the same board with other switches

(d) One 3 pin 6 Amp switch socket outlet on the independent board

(e) One bell/buzzer point controlled by one push button.

All as per item No 28 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps switch socket outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified and as directed by Engineer in Charge

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type multi purpose flush type 230 volt

S&F switch socket combinatin 2 in 1, 16 Amp flush type multi purpose 230 volt

S&F switch piano flush button single pole one way 6 Amps 230 volt grade

S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board make : Anchor code No 3290 penta or equivelent in Legrand complete all as specified and as directed by Engineer in Charge

S&F bell push flush type 5 Amps 230 volts grade complete all as specified and as directed by Engineer in Charge

M&L bell multi musical type 230 volts grade complete all as specified and as directed by Engineer in Charge

S&F step type electronic fan regulator EME type 450 watt complete all as specified and as directed by Engineer in Charge

S&F modular switch socket combination 2 /3 pin 6 Amps 2 module 230 volt complete all as specified and as directed by Engineer in Charge

S&F modular switch socket combinatin 2/3 pin 6/16 Amp 230 volt complete all as specified and as directed by Engineer in Charge

S&F modular switch 1 way 6 Amps 1module 230 volt grade complete all as specified and as directed by Engineer in Charge

S&F modular bell push flush type 5 Amps 230 volts complete all as specified and as directed by Engineer in Charge

S&F modular step type electronic fan regulator 2 module 120 watt complete all as specified and as directed by Engineer in Charge

S&F white cover plate with frame,2 module complete all as specified and as directed by Engineer in Charge

S&F white cover plate with frame,6 module complete all as specified and as directed by Engineer in Charge

S&F white cover plate with frame,4 module complete all as specified and as directed by Engineer in Charge

S&F white cover plate with frame,8 module complete all as specified and as directed by Engineer in Charge

M&Lin repairs concealed submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 20 mm dia with all PVC accessories complete all as specified and as directed by Engineer in Charge

M&Lin repairs concealed submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit size not less than 20 mm dia with all PVC accessories complete all as specified and as directed by Engineer in Charge

Supply and fix in repairs Recess mounted 2x2 luminaire 24W comprises of thermally conductive material complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm complete all as specified and as directed by Engineer in Charge Crompton Code No : LCTLRNE-24-FO-CDL or equivalent in Philips, Havells.

Supply and fixing of distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt, 415V of the following capacity: (a) 8 way SPN with 200 amps rated busbar 240 volts (double door type).

(b) 4 Way SPN with 200Amp rated busbar 240V (Double door type)

Supply & fix 4 way VTPN Distribution Board (with provision for MCCB as incomer & WiNtrip MCB as outgoing) complete all as specified and as directed by Engineer in Charge Make:C&S CSDBMCCB100DD04IP43 or equivalent make in Indoasian/havells/L&T.

S&F MCCB's, MCB's with GI hardwaer of following capacity :- (a) MCCB 415 volts 100 Amps 04 pole 30 KA Make L&T Model: CM90679OOLO

(b) MCB TPN 63Amps C curve 415 V, 10 KA Make Havells Cat No:DHMGCTNF063

(c) MCB SP 240 volts 10-40 Amps

(d) MCB SPN 240 volts 32 Amps

S&Fin repairs Linear LED T8 tubular lamp of 20 watt with extruded aluminium body,PC diffuser and inbuilt driver including compact batten suitable for LED T8 lamps , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm complete all as specified and as directed by Engineer in Charge Cat Part No:DIJB12LT8-20 and Lamp -LGT8-20-865-2, Make Crompton or equivalent in Bajaj/Havells /Philips /Crompton.

M&L batten holder insulated with back plate including suitable size of PVC round block complete all as specified and as directed by Engineer in Charge

S&F sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 20 Amps, 240 volts complete all as specified and as directed by Engineer in Charge

S & Fin repairs street light GI bracket of 0.6 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified and as directed by Engineer in Charge

S&F in repairsLED mirror light fitting 1 x 9 W 230 volts attractive wall / ceiling mounted type with decorative grey end caps, polycarbonate body and ribbed opal diffuser.matallic channel and white refelector suitabale for mirrior fitting,complete with all accessoris prewired and including connecting up with twin core twisted flexible copper conductor cable 0.5 sqmm size complete.Make -Havells Code No LHEXARP6PN1W009 or equivalent in Philips.

S&Fin repairs 20 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 4.0 sq mm multistranded aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed , Make :- Crompton Cat NoLST-20-CDL-M or equivalent in wipro, Bajaj, Philips.

S&Finrepairs LED light fitting 14 W,230V decorative wall mounting type with multicolour ABS housing with poly carbonate rings and glass shade with lamp, lamp holders connector block,etc complete with all accessaries pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.Cat No: LHFOECE1TZ1O014 in Havells or equivalent in Bajaj, Philips

S&F in repairsLED light fitting 4 W,230V decorative wall mounting type brushed nickle finish fixture with opal glass diffuser with filament lamp E14 base etc complete with all accessaries pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.Cat No: LHFOAIC1TZ1O014 in Havells or equivalent in Bajaj, Philips

S&Fin repairs New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power 40 Watt LEDs as light source.Make:Havells RUBY (CLEAR) - IP65 LHEVBGP7PN6K040,Bajaj orequivalent

S&F service connection fixing or laying and passing through pipe 1100V grade heavy duty cable with PVC insulated aluminium conductor served with and inner sheathing of PVC tape and over all 6 sqmm 2 core nominal cross section in service connection complete all as specified and as directed by Engineer in Charge

Supply and fixing of PVC conduit size 25mm Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories including chase cutting/trenchs such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed by Engineer in Charge

Supply and fixing of bollard lighting New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source.including providing PCC 1:2:4 Base in round shape of dia 30cm and hight up 15cm with grouting bolt to fixing of light fitting complete all as directed by Engr-inCharge . Make Havells cate no BAMBOOBL8WLED757PSYMTOPCM or equivelent in philips/ wipro

Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 3 Mtr below the ground level with the top edge of earth plate, depth not less than 2.25 Mtr below the ground level connected to GI earth wire 4mm dia by means of bolts, nuts and washers protected by GI tubing light grade 15 mm dia uptoTest point, 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm all as required specified & directed by engr in charge ( Note:- Up to 7.5 Mtr length of pipe of 15 mm dia and GI wire shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item.

Supply and Fix in repairs LED drivers rated voltage 240 volt max out put power 42 W complete all as specified and as directed by Engineer in Charge Make -Havells Code No LEDDRIVER36V1A42WS or equivalent in Philips /Bajaj/ Crompton.

krishna Associate