Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.9 CrAccepted-AOC CABIN NO 1 1ST FLOOR SHOP NO 8 9 RAILLY SECTOR 12 A PANCHKULA | PANCHKULA | HARYANA | 133301 | ₹11.9 Cr | L1 | Accepted-AOC L1 |
| 2 | Rejected-Technical 26 DHAWAN COLONY FEROZPUR CITY FEROZPUR PUNJAB | - | - | Rejected-Technical Non Responsive |
Tender Value
₹13.7 Cr
EMD Value
₹27.5 L
Closing Date
14 Jan 2026, 1:00 pmClosed
Executive Engineer
Xen Provl. Divn. No. 2 PWD B and R Patiala
Upgradation of Jarout Rampur Sainian Road RD 0.00 to 23.20 Km in Distt. SAS Nagar with 5 year routiine maintenance under Special Assistance /Head 5054 RB-10 Year 2026-27
2025_CEPW_156860_1
Re Tender Notice No. 60 dated 29.12.2025
Open Tender
Civil Works - Roads
365 days
Jarout Rampur sainian
Please refer Tender documents.
3 documents required · 3 mandatory
₹50,000
₹27.5 L
Yes
9 Feb 2026
30 Dec 2025
14 Jan 2026
30 Dec 2025
14 Jan 2026
30 Dec 2025
Select, At Par, Excess (+), Less (-) IOCL
Tender Inviting Authority: EXECUTIVE ENGINEER PROVINCIAL DIVISION NO.2, PWD B&R, PATIALA
Name of Work: UPGRADATION OF JAROUT RAMPUR SAINIAN ROAD RD 0.00 TO 23.20KM IN DISTRICT SAS NAGAR WITH 5 YEARS ROUTINE MAINTENANCE AFTER COMPLETION OF WORK (2ND YEAR TO 5TH YEAR) (1ST YEAR WILL BE CONSIDERED AS DEFECT LIABILITY PERIOD) UNDER SPECIAL ASSISTANCE/ HEAD 5054 (RB-10) ROADS YEAR 2026-27
Contract No: Civil Works
Name of the Bidder/ Bidding Firm / Company :
Sl. No. Work Name Item Code / Make Quantity Unit Rate Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
1 Construction Work (Part-I) 1 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
2 Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lift and combined lead up to 60 mtr. 2 Cum Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
3 Construction of embankment with earth obtained from roadway cutting or excavation including spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications 3 Cum Excess(+) Full Conversion INR INR Seven Lakh Ninety Four Thousand One Hundred & Twenty Two Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
4 Earth work on berms with earth obtained from borrowpits including loading, unloading, carriage to work site, laying in layers, watering and rolling to specifications 4 Cum Excess(+) Full Conversion INR INR Twenty Five Lakh Twenty Four Thousand &Eighty Eight Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
5 Taking out existing CC interlocking paver blocks from footpath/ central verge/pavement, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. 5 Sqm Excess(+) Full Conversion INR INR One Lakh Twenty Three Thousand Nine Hundred & Ninety Two Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
6 Credit of old 80mm thick Interlocking Paver Blocks 6 nos. Excess(+) Full Conversion INR INR Minus One Lakh Two Thousand Six Hundred & Fifty Five Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
7 Compaction of earth work & Preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. (In case of link roads earth work to be done by villagers) 7 Sqm Excess(+) Full Conversion INR INR One Lakh Twelve Thousand Six Hundred & Twenty Two Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
8 Construction of granular sub-base by providing material as per grading-III ( Table 400-I of MORT&H 5th revision), mixing in a mechanical mix plant at OMC, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of MORT&H specifications 8 Cum Excess(+) Full Conversion INR INR Seventy Two Lakh Seventy Six Thousand Four Hundred & Forty One Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
9 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications 9 Cum Excess(+) Full Conversion INR INR One Crore Nine Lakh Forty Seven Thousand Three Hundred & Twenty One Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
10 Providing and laying slurry seal Type-II 4-6mm thickness consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion SS-2 @ 10.50% and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface complete as per technical clause 512 of MORT&H specifications 10 Sqm Excess(+) Full Conversion INR INR Five Lakh Thirty Four Thousand Two Hundred & Ninety Seven Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
11 Providing and applying tack coat with bitumen emulsion RS using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications & to the entire satisfaction of Engineer-in-Charge 11 Sqm Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
12 Providing and laying dense graded bituminous macadam 50mm to 75mm thick with batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5%, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 505 of MORT&H specifications NOTES:- (i) Job mix formula for the dense bituminous macadam shall be provided by the agency and shall be got approved from Punjab PWD, B&R Research Laboratory Patiala before adoption at site for execution. (ii) The specification of this item for analytic purpose is kept with bitumen content @ 4.50% weight of mix variation as compared with job mix formula shall be paid/ deducted accordingly. The limits of variation shall be worked out with the approved formula. TECHNICAL NOTE:- I.) Apart from the conformity with the grading and quantity requirement of individual ingredients exhibited above the mix aggregate i.e. coarse and fine aggregate for dense bituminous concrete shall meet all requirements set forth clause 505 of MORT&H specifications. II.) The final grading for the aggregates required for dense bituminous macadam confirming to table 500.10 of MORT&H specifications shall be determined after getting the dense bituminous macadam designed from Punjab PWD, B&R Research Laboratory Patiala after obtaining 60% of material. The design mix so finally approved shall be termed as the approved mix. The aggregates shall be hydrophobic and of low porosity. The aggregates shall satisfy the physical requirement set forth in table 500-6 (addendum to latest revision). III.) The approved mix shall exhibit the following details source and location of all material:- (a) Binder expressed as percentage by weight of total mix. (b) Course expressed as percentage by weight of total mix. (c) Crushed bajri expressed as percentage by weight of total mix. (d) Fine aggregate expressed as percentage by weight of total mix. (e) A single definite percentage passing each sieve for mixed aggregates. (f) Density of dense bituminous macadam after compaction will be not less than 2.30 gm/CC 12 Cum Excess(+) Full Conversion INR INR One Crore Sixty Seven Lakh Sixty One Thousand Five Hundred & Twenty Eight Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
13 Providing and laying bituminous concrete 30mm to 45mm thick with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4%, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of MORT&H specifications NOTES:- (i) Job mix formula for the bituminous concrete shall be provided by the agency and shall be got approved from Punjab PWD, B&R Research laboratory Patiala before adoption at site for execution. (ii) The specifications of this item for analytic purpose is kept with bitumen content @ 5.4% weight of mix variation as compared with job mix formula shall be paid/ deducted accordingly. The limits of variations shall be worked out with the approved formula. TECHNICAL NOTE:- i.) Apart from the conformity with the grading and quantity requirement of individual ingredients exhibited above the mix aggregate i.e. coarse and fine aggregate for bituminous concrete shall meet all requirements set forth clause 507 of MORT&H specifications. ii.) The final grading for the aggregates required for bituminous concrete confirming to table 500.17 of MORT&H specifications shall be determined after getting the bituminous concrete designed from Punjab PWD, B&R Research Laboratory Patiala after obtaining 60% of material. The design mix so finally approved shall be termed as the approved mix. The aggregates shall be hydrophobic and of low porosity. The aggregates shall satisfy the physical requirement set forth in table 500-6 (addendum to latest revision). iii.) The approved mix shall exhibit the following details, source and location of all material:- (a) Binder expressed as percentage by weight of total mix. (b) Course expressed as percentage by weight of total mix. (c) Crushed bajri expressed as percentage by weight of total mix. (d) Fine aggregate expressed as percentage by weight of total mix. (e) A single definite percentage passing each sieve for mixed aggregates (f) Density of bituminous concrete after compaction will be not less than 2.35 gm/CC. 13 Cum Excess(+) Full Conversion INR INR Four Crore Sixty Lakh Sixty Eight Thousand &Five Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
14 Providing and laying 80 mm thick factory made cement concrete interlocking Paving blocks of M-40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge. 14 Sqm Excess(+) Full Conversion INR INR One Crore Sixty Lakh Twenty Eight Thousand Two Hundred & Sixty Seven Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
15 Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications 15 mtr. Excess(+) Full Conversion INR INR Sixty Seven Lakh Twelve Thousand Six Hundred & Sixteen Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
16 Reinforced cement concrete M-15 grade ordinary kilometer stone of standard design as per IRC 8-1980 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specifications 16 Each Excess(+) Full Conversion INR INR Forty Four Thousand Eight Hundred & Seventy Two Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
17 Painting Ordinary kilometre stones with synthetic enamel paint two coat work complete as per PWD specifications 17 Each Excess(+) Full Conversion INR INR Five Thousand Three Hundred & Twenty Four Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
18 Reinforced cement concrete M-15 grade 5th kilometer stone of standard design as per IRC 8-1980 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specifications 18 Each Excess(+) Full Conversion INR INR Twelve Thousand Seven Hundred & Eighty Seven Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
19 Painting 5th kilometre stones with synthetic enamel paint two coat work complete as per PWD specifications 19 Each Excess(+) Full Conversion INR INR Two Thousand Eight Hundred & Thirty Six Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
20 Reinforced cement concrete M-15 grade 200 meter stone of standard design as per IRC 26-1967 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specifications 20 Each Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
21 Painting200m stones with synthetic enamel paint two coat work complete as per PWD specifications 21 Each Excess(+) Full Conversion INR INR Two Thousand Five Hundred & Ninety Two Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
22 Reinforced cement concrete M-15 grade boundary pillars of standard design as per IRC 25-1967 fixing in position including painting and printing etc. complete as per technical clause 806 of MORT&H specifications 22 Each Excess(+) Full Conversion INR INR Two Lakh Eighty Eight Thousand &Eighty Two Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
23 Providing & Fixing Cautionary sign board 900x900x900mm triangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 4mm thick aluminum Composite material (ACM) sheeting having aluminum skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminum alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 + Definition Plate 600x200mm rectangular as per as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. specifications. Fixed over 3mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame welded with vertical post of sign board complete as per clause 801 of MORT&Hspecifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 . Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 23 Each Excess(+) Full Conversion INR INR Five Lakh Five Thousand Five Hundred & Twenty Seven Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
24 Providing & Fixing Mandatory sign board 900mm circular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. Fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 + Definition Plate 600x200mm rectangular as per as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. specifications. Fixed over 3mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame welded with vertical post of sign board complete as per clause 801 of MORT&Hspecifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 . Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 24 Each Excess(+) Full Conversion INR INR Six Lakh Fifty Five Thousand Five Hundred & Ninety Two Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
25 Providing & Fixing Advance Direction sign board 1200x900mm rectangular per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. grade sheeting fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.60x0.60x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 25 Each Excess(+) Full Conversion INR INR Five Lakh Twenty Four Thousand Three Hundred & Forty One Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
26 Overhead sign board 6000x1500mm cantilever type double sided as per IRC 67-2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 40x40x6mm angle iron supported on designed single support system of MS pipe and plates in the form of a cantilever type truss made with 350NB pipe @50kg per mtr as vertical support, 50NB pipe @ 4.50kg per mtr and 40NB pipe @ 3.61kg per mtr for truss including base plates, gusset plates,designed RCC foundation for fixing in ground complete as per clause 802 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67- 2012 . Using high intensity Microprismatic grade retro reflective Sheeting Type XI as per ASTM D 4956 09 and as per IRC 67-2012 26 Each Excess(+) Full Conversion INR INR Nine Lakh Sixty Eight Thousand Five Hundred & Ninety One Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
27 Providing & Fixing Hazard Marker sign board 300x900mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 09 and IRC 67 2012, fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground including foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 27 Each Excess(+) Full Conversion INR INR Seven Lakh Sixteen Thousand Two Hundred & Forty Two Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
28 Informatory sign board 600x600mm square as per \IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. with retro reflective high intensity Microprismatic grade sheeting fixed over 3mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.25 to 0.3 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67- 2012 Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 28 Each Excess(+) Full Conversion INR INR Thirty One Lakh Sixty Six Thousand Three Hundred & Ninety Four Only 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos
29 Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications 29 Sqm Excess(+) Full Conversion INR INR Fifty Four Lakh Eighty Nine Thousand Two Hundred & Forty Four Only
30 Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens or Glass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The supplier shall provide a 2 years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications. 30 Each Excess(+) Full Conversion INR INR Thirty Seven Lakh Eighty Nine Thousand Six Hundred & Thirty Only
31 Add 1% Cultural affairs and Heritage Maintenance cess 31 Percentage Excess(+) Full Conversion INR INR Twelve Lakh Sixty Two Thousand Three Hundred & Seventy Seven Only
32 Routine maintenance (Part-II) 1st year will be considered as defect liability period 32 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos
Total in Figures Upgradation Cost only INR Twelve Crore Seventy Five Lakh &Eighty One Only 4 Construction of chamber for 100mm sluice plates item5 10 Nos
Total Routine Maintenance cost only
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.77 MB
BOQ_318019.xls
BOQ • 0.32 MB
Clause25.pdf
Additional Documents • 0.68 MB
emdcorri.pdf
Additional Documents • 0.70 MB
sbdn.pdf
Tender Documents • 6.71 MB
Download all tender documents and submit your bid