DEMOLITION OF EXISTING HOSPITAL BUILDING AND CONSTRUCTION OF 30 BEDDED HOSPITAL AT NAVAL STATION KARANJA

Amount

SCHEDULE "A" Part - I (BUILDING WORKS) Total of Sch-'A' Part-I B/F from Serial Page No.25

SCHEDULE "A" PART-II (EARTH WORK AND SITE CLEARENCE) Total of Sch-'A' Part-II C/o B/F from Serial Page No.27

SCHEDULE "A" PART-III ( DEMOLITION / DISMANTLING Total of Sch-'A' Part-III B/F from Serial Page No. 30

SCHEDULE "A" PART-IV (INTERNAL WATER SUPPLY) Total of Sch-'A' Part-IV B/F from Serial Page No.33

SCHEDULE "A" PART-V (INTERNAL ELECTRIC SUPPLY) Total of Sch-'A' Part-V B/F from Serial Page No. 39

SCHEDULE "A" PART- VI (ROAD/PATH/CULVERT) Total of Sch-'A' Part-VI B/F from Serial Page No. 42

SCHEDULE "A" PART-VII (SEWAGE DISPOSAL) Total of Sch-'A' Part-VII B/F from Serial Page No. 44

SCHEDULE "A" PART-VIII (AREA DRAINAGE) Total of Sch-'A' Part-VIII B/F from Serial Page No.45

SCHEDULE "A" PART-IX (COMPOUND WALL) Total of Sch-'A' Part-IX B/F from Serial Page No. 46

SCHEDULE "A" PART-X (EXTERNAL WATER SUPPLY) Total of Sch-'A' Part-X B/F from Serial Page No.48

SCHEDULE "A" PART-XI (EXTERNAL ELECTRIFICATION) Total of Sch-'A' Part-XI B/F from Serial Page No. 51

SCHEDULE "A" PART-XII (CONDUIT FOR LAN/TV/TELEPHONE) Total of Sch-'A' Part-XII B/F from Serial Page No.52

SCHEDULE "A" PART-XIII (AIR CONDITIONING) Total of Sch-'A' Part-XIII B/F from Serial Page No.56

SCHEDULE "A" PART-XIV (LIFTS) Total of Sch-'A' Part-XIV B/F from Serial Page No.61

SCHEDULE "A" PART-XV (HOT WATER SUPPLY) Total of Sch-'A' Part-XV B/F from Serial Page No.62

SCHEDULE "A" PART-XVI (LIGHTNING PROTECTION) Total of Sch-'A' Part-XVI B/F from Serial Page No.64

SCHEDULE "A" PART-XVII (FIRE PROTECTION SYSTEM) Total of Sch-'A' Part-XVII B/F from Serial Page No.68

SCHEDULE "A" PART-XVIII (MECHANICAL LAUNDRY) Total of Sch-'A' Part-XVIII B/F from Serial Page No. 69

SCHEDULE "A" PART-XIX (DG SET) Total of Sch-'A' Part-XIX B/F from Serial Page No. 70

SCHEDULE "A" PART-XX (SUMMER APPLIANCES) Total of Sch-'A' Part-XX B/F from Serial Page No. 71

SCHEDULE "A" PART-XXI (ARBORICULTURE) Total of Sch-'A' Part-XXI B/F from Serial Page No. 72

SCHEDULE "A" PART -XXII (MISCELLANIOUS ITEMS)

INTERNAL WATER SUPPLY

S&F two way bib cock 20 mm dia. Make - Jaquar Model No CQT-23041 or equivalent in Crab Tree/Kohler brand

S&F Sink cock with swinging casted round shape spout (Wall mounted model) 20 mm dia, quarter turn Make - Jaquar Model No CQT-23347 or equivalent in Crab Tree/Kohler brand

S & F Hand shower (Health faucet) with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back flow preventer) Make - Jaquar Model No ALD-CHR- 583 or equivalent in Crab Tree/Kohler brand

INTERNAL ELECTRIC SUPPLY

S & F of 4' batten light 34 watt suitable for surface / suspended mounting with steel housing, polycarbonate lens & optical cover, LED light having beam angle of light source 120˚, initial luminous flux 4000 lm, luminous efficacy not less than 100 lm/W, initial CCT 6500 K, initial CRI greater than 80, initial chromaticity <5, L70B50 50000 hr, IP 20 and IK 02 protection, surge protection level until 4 kV, power factor not less than 0.95 and built-in driver conforming to IS 15885 (Part 2/Sec 13): 2012 complete with electrical connection through 3 core PVC insulated copper conductor unarmoured cable of suitable size from ceiling rose to the light fitting as specified and directed by engineer-in-charge. Make: Philips BN308C LED40S-6500 L120 PSU WH or equivalent model of Havells, Wipro, Bajaj

S & F of 2' batten light 16 watt suitable for surface / suspended mounting with steel housing, polycarbonate lens & optical cover, LED light having beam angle of light source 120˚, initial luminous flux 2000 lm, luminous efficacy not less than 100 lm/W, initial CCT 6500 K, initial CRI greater than 80, initial chromaticity <5, L70B50 50000 hr, IP 20 and IK 02 protection, surge protection level until 4 kV, power factor not less than 0.95 and built-in driver conforming to IS 15885 (Part 2/Sec 13): 2012 complete with electrical connection through 3 core PVC insulated copper conductor unarmoured cable of suitable size from ceiling rose to the light fitting as specified and directed by engineer-in-charge. Make: Philips BN308C LED20S-6500 L120 PSU WH or equivalent model of Havells, Wipro, Bajaj

S & F of round shape recessed downlight with spring clip for recess mounting 13.5 watt, LED light having beam angle of light source 120˚, aluminium die cast housing, polycarbonate lens & optical cover, initial luminous flux 1500 lm, luminous efficacy not less than 100 lm/W, initial CCT 6500 K, initial CRI greater than 80, initial chromaticity <5, L70B50 50000 hr, IP 20 and IK 02 protection, surge protection level until 2.5 kV, power factor not less than 0.95 and built-in driver conforming to IS 15885 (Part 2/Sec 13): 2012 complete with electrical connection through 3 core PVC insulated copper conductor unarmoured cable of suitable size from ceiling rose to the light fitting as specified and directed by engineer-in-charge. Make: Philips DN 296B LED 15S-6500 PSU WH or equivalent model of Havells, Wipro, Bajaj

S & F of 42 watt round shape recessed mounted accent lighting luminaire with LED light having beam angle of light source 36˚, aluminium die cast housing & heat sink, initial luminous flux 4000 lm, luminous efficacy not less than 95 lm/W, initial CCT 4000 K, initial CRI greater than 80, L70B50 30000 hr, IP 20 and IK 02 protection, surge protection level until 2.5 kV, power factor not less than 0.90 and built-in driver conforming to IS 15885 (Part 2/Sec 13): 2012 complete with electrical connection through 3 core PVC insulated copper conductor unarmoured cable of suitable size from ceiling rose to the light fitting as specified and directed by engineer-in-charge. Make: Philips RS271B LED40/840 PSU-E WB WH or equivalent model of Havells, Wipro, Bajaj

S & F of 31 watt square shape fully diffused recessed mounted 2' X 2' LED luminaire with, metallic CRCA housing & powder coated body, initial luminous flux 3600 lm, luminous efficacy not less than 110 lm/W, initial CCT 6500 K, initial CRI greater than 80, initial chromaticity <5, L70B50 50000 hr, IP 20 and IK 02 protection, power factor not less than 0.90 and built-in driver conforming to IS 15885 (Part 2/Sec 13): 2012 complete with electrical connection through 3 core PVC insulated copper conductor unarmoured cable of suitable size from ceiling rose to the light fitting as specified and directed by engineer-in-charge. Make: Philips RC380B LED 36S-6500 G4 L60 W60 PSU OD or equivalent model of Havells, Wipro, Bajaj

S & F portable shadowless light fitting having lilluminance upto 40000 lux and complete with emergency power unit & battery back up for min 30 minutes (1 KVA), having dome of 810 mm diameter, fully counter balanced moveable on ceiling trolley having a minimum longitudinal travel of 1350 mm and axial rotation of 360˚, suitable for operation on 230 V, 1-Ph, 50 Hz AC Supply Model: Meditech Cat No. - XN1 (40000 LUX), Hexawave or equivalent Dr. Med complete in all respect as specified and directed by engineer-in-charge.

S & F 45 W LED street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 100 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete in all respect as specified and directed by engineer-in-charge. Make: BAJAJ Cat-Part No. BAJAJ 169799 BRTFG 45W LED I or equivalent model of Havells, Philips or Wipro

S & F BEE five star rated energy efficient high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 200 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size complete with electrical connection through 3 core PVC insulated copper conductor unarmoured cable of suitable size as specified and directed by engineer-in-charge. Make: Havells, Bajaj, Crompton, Usha

S & F BEE five star rated energy efficient high-speed ceiling fan having 1400 mm blade sweep, air-flow not less than 250 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size complete with electrical connection through 3 core PVC insulated copper conductor unarmoured cable of suitable size as specified and directed by engineer-in-charge. Make: Havells, Bajaj, Crompton, Usha

S & F factory made 2 X 6 module screwless, dust-proof cover plates having superior finish, rounded corners and solid strength, supported by plastic frame behind with flexible wall alignment, horizontal adjustment facility complete as specified and directed by engineer-in-charge. Make: Legrand Arteor Cat-Part No. 5757 70 or equivalent model of Anchor or Havells

Supply, installation, testing and commissioning of factory made, CPRI type tested/approved, indoor cubical compartmental type BUILDING FEEDDER DB WITHOUT DG BACK-UP (F) of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB

The BUILDING FEEDDER DB WITHOUT DG BACK-UP (F) shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 320 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 250 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set

[B] OUTGOING [i] 63 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 05 Nos. [ii] LED phase indicators (Red, Yellow, Blue)- 05 Set [iii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 05 Nos. NOTES: [i] The Panel shall be completely Ethernet communication ready to communicate with Energy Management System. [ii] 06 Nos. of ON / OFF / TRIP status and operations counters as well as meters shall be wired to Ethernet gateway part of the Panel. [iii] The bidder shall furnish dimensional drawings of the items offered, indicating all the fittings, dimensional tolerances, typical GADs, etc. with details of insulation at each point and core construction, etc. for approval of the Garrison Engineer.

Supply, installation, testing and commissioning of factory made, CPRI type tested /approved, indoor cubical compartmental type BUILDING FEEDDER DB WITHOUT DG BACK-UP (R) of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB

The BUILDING FEEDDER DB WITHOUT DG BACK-UP (R) shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 500 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 400 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set

[B] OUTGOING [i] 200 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] 63 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 05 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 06 Set [iv] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 06 Nos. NOTES: [i] The Panel shall be completely Ethernet communication ready to communicate with Energy Management System. [ii] 07 Nos. of ON / OFF / TRIP status and operations counters as well as meters shall be wired to Ethernet gateway part of the Panel. [iii] The bidder shall furnish dimensional drawings of the items offered, indicating all the fittings, dimensional tolerances, typical GADs, etc. with details of insulation at each point and core construction, etc. for approval of the Garrison Engineer.

Supply, installation, testing and commissioning of factory made, CPRI type tested /approved, indoor cubical compartmental type BUILDING FEEDDER DB WITH DG BACK-UP (F) of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB

The BUILDING FEEDDER DB WITH DG BACK-UP (F) shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 500 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 400 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set

[B] OUTGOING [i] 125 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] 80 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 02 Nos. [iii] 63 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 02 Nos. [iv] LED phase indicators (Red, Yellow, Blue)- 05 Set [v] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 05 Nos. NOTES: [i] The Panel shall be completely Ethernet communication ready to communicate with Energy Management System. [ii] 06 Nos. of ON / OFF / TRIP status and operations counters as well as meters shall be wired to Ethernet gateway part of the Panel. [iii] The bidder shall furnish dimensional drawings of the items offered, indicating all the fittings, dimensional tolerances, typical GADs, etc. with details of insulation at each point and core construction, etc. for approval of the Garrison Engineer.

Supply, installation, testing and commissioning of factory made, CPRI type tested /approved, indoor cubical compartmental type BUILDING FEEDDER DB WITH DG BACK-UP (R) of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB

The BUILDING FEEDDER DB WITH DG BACK-UP (R) shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 500 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 400 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set

[B] OUTGOING [i] 125 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] 80 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [iii] 63 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 04 Nos. [iv] LED phase indicators (Red, Yellow, Blue)- 06 Set [v] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 06 Nos. NOTES: [i] The Panel shall be completely Ethernet communication ready to communicate with Energy Management System. [ii] 07 Nos. of ON / OFF / TRIP status and operations counters as well as meters shall be wired to Ethernet gateway part of the Panel. [iii] The bidder shall furnish dimensional drawings of the items offered, indicating all the fittings, dimensional tolerances, typical GADs, etc. with details of insulation at each point and core construction, etc. for approval of the Garrison Engineer.

Supply, installation, testing and commissioning of factory made, CPRI type tested /approved, indoor cubical compartmental type MECHANICAL LAUNDRY PANEL of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB

The Building Feeder Panel shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 320 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 200 A, 415 V, Ics = 100% Icu = 50 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set

[B] OUTGOING [i] 80 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [for Washer extratorl] [ii] 63 A, 415 V, Ics = 100% Icu = 50 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [for Tumble Dryer] [iii] 20 A, 10 kA, 415 V, 50 Hz FP MCB (c -curve)- [for Steam Generator] [iv] 16 A, 10 kA, 415 V, 50 Hz FP MCB (c -curve)- 02 nos.-[for Steam Ironing] [v] LED phase indicators (Red, Yellow, Blue)- 02 Set [vi] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 02 Nos.

NOTES: [i] The Panel shall be completely Ethernet communication ready to communicate with Energy Management System. [ii] 05 Nos. of ON / OFF / TRIP status and operations counters as well as meters shall be wired to Ethernet gateway part of the Panel. [iii] The bidder shall furnish dimensional drawings of the items offered, indicating all the fittings, dimensional tolerances, typical GADs, etc. with details of insulation at each point and core construction, etc. for approval of the Garrison Engineer. [iv] The bidder shall intimate the Garrison Engineer of the routine tests in accordance with IEC 61439-1 & 2 and IEC 61641 in the OEM factory in presence of a representative nominated by the Garrison Engineer before dispatch.

Supply, installation, testing and commissioning of factory made, CPRI type tested /approved, indoor cubical compartmental type ROOF FLOOR PANEL of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB

The Building Feeder Panel shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 200 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 100 A, 415 V, Ics = 100% Icu = 50 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set

[B] OUTGOING [i] 63 A, 10 kA, 415 V, 50 Hz FP MCB (c -curve)- 03 Nos. [ii] 32 A, 10 kA, 415 V, 50 Hz SPN MCB (c -curve)- [for machine room DB] NOTES: [i] The Panel shall be completely Ethernet communication ready to communicate with Energy Management System. [ii] 01 Nos. of ON / OFF / TRIP status and operations counters as well as meters shall be wired to Ethernet gateway part of the Panel. [iii] The bidder shall furnish dimensional drawings of the items offered, indicating all the fittings, dimensional tolerances, typical GADs, etc. with details of insulation at each point and core construction, etc. for approval of the Garrison Engineer. [iv] The bidder shall intimate the Garrison Engineer of the routine tests in accordance with IEC 61439-1 & 2 and IEC 61641 in the OEM factory in presence of a representative nominated by the Garrison Engineer before dispatch.

S & F MCB for AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, etc. complete as specified and directed by engineer-in-charge. Make:Legrand, Schneider, Siemens, ABB

(a) 6- 32 A, 230 V, 50 Hz SP MCB (c- curve)

(b) 40- 63 A, 230 V, 50 Hz TP MCB (c- curve)

S & F moulded case circuit breaker (MCCB), four pole, in single frame size up to 250 A with thermal magnetic trip unit (TMD), compression lug connectors, protection against overloads (Ir adjustable from 0.7- 1 X In), protection against short circuits (Isd adjustable from 1.5- 10 X Ir), inbuilt encapsulated double break roto active type instanteneous protection, earth fault leakage protection, etc. having Ics = 100% Icu as per IEC 60947-2 complete all as specified and directed by engineer-in-charge. Make:Legrand, Schneider, Siemens, ABB

(a) 63 A, 415 V, 16 kA, 50 Hz FP MCCB

(b) 80 A, 415 V, 16 kA, 50 Hz FP MCCB

(c) 125 A, 415 V, 16 kA, 50 Hz FP MCCB

S & F vertical triple pole & neutral, double door, metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for MCCB up to 250 A as incomer and SP/TP MCBs as outgoing, reversible metal door, fully insulated 250 A copper busbar for each phase, two fully insulated & shrouded neutral bars, two earthbars, cable ties for cable management, prefitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed. NOTE: MCCB/MCBs shall be measured and paid separately.

(a) vertical triple pole and neutral DB, 6 way Make: Legrand Ekinox³ Cat-Part No. 5077 26 or equivalent model of Schneider, Siemens or ABB

(b) vertical triple pole and neutral DB, 4 way Make: Legrand Ekinox³ Cat-Part No. 5077 27 or equivalent model of Schneider, Siemens or ABB

COMPOUND WALL

M & L for Steel Gate 6.5m wide and 2.1m high incl Excavation in hard/dense soil, in trenches n exc 1.5 m wide and n exc 1.5 m deep, PCC 1:4:8 type D2 in foundation, RCC M-30 grade column footing and RCC M-30 in Column with necessary reinforcement steel, fabrication and mild steel Gate and similar works, hung as gates, including pintle hinges, stop & hand made sliiding bolt, etc. for ornamental and inticate design complete conforming to FE-290 grade E-165, locking and bolting arrangement incl painting,Providing 20mm Thk Granite cladding to column over rendering cement plaster 10mm thick in cement mortar 1:4 including returning filling in spreading levelling watering and well ramming and removal of surplus excavated materials.(Ref TD drg No TD/2007/3 Sh 1/1)

M & L for Steel Gate 8.0m wide, 02 Nos (as per drg No. WD/2020/04 dated- 27 Aug 2020, Sheet No. 22/99) incl Excavation in hard/dense soil, in trenches n exc 1.5 m wide and n exc 1.5 m deep, PCC 1:4:8 type D2 in foundation, RCC M-30 grade column footing and RCC M-30 in Column with necessary reinforcement steel, fabrication and mild steel Gate and similar works, hung as gates, including pintle hinges, stop & hand made sliding bolt, etc. for ornamental and intricate design complete conforming to FE-290 grade E-165, locking and bolting arrangement including painting,Providing 20mm Thk Granite cladding to column over rendering 10mm thick in cement mortar 1:4 including returning filling in and spreading,levelling,watering and well ramming and removal of surplus excavated materials complete all as specified and as directed .

EXTERNAL WATER SUPPLY

Supply and lay pipe ductile iron Spigot and socket including specials, class K-7, 150mm dia (taking point to UG sump)

Supply installation, testing and commissioning of centrifugal pump cast iron body 1500 LPM at 30 mtrs head , with bronze impellers including provision for fixing safety valve, pressure guage and priming valve etc coupled with 3 phase induction motor suitable for operation on 415V, AC with coupling mounted on channel iron base frame including nuts, bolts & washers, with PCC foundation, foundation nuts, bolts & washers as per manufacturer' instructions complete all as directed. Make : Kirloskar/Crompton or equivalent

Supply and fix CI foot valve conforming to IS 4038, 100 mm dia

Construction of brick masonary valve chamber in repair of size 0.9x0.9x0.9mtr(internal dimension) above ground level 30mm suitable for 100mm dia sluice valve ,15cm thick foundation using PCC 1:4:8 type D-2 (using 40mm graded stone aggregate )over 15 cm thick hardcore 23cm thick brick wall builts in cement and sand motor 1:3 ,finished even and smooth ,without using extra cement ,10mm thick mild steel plate cover on 50mmx50mmx6mm MS angle iron frame embeded in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate coping having rectangular hinged opening of size with locking arrangenment & handle made out of 25 cm dia MS round bar,hold fast etc. aaplying one coats oxide primer and two coats of synthetic ,enemelled paint to all steel surface and earth work in any type of soil including disposal of surpulus soil distance not ex 50 mtr complete all as specified.

SITC of factory made LT Panel board (Pump House Panel) CPRI approved cubical type floor mounting dust and vermin proof made out of 2 mm thick CRCA sheet steel with angle iron base frame, free standing on cable duct with cable entry holes at the bottom suitable for operation on 440 Volts, AC 3 phase, 4 wire, 50Hz with 200 Amps rated copper Bus Bar,fuly compartmentalised, vermin proof, painting with powder coating 7 tank process suitable for IP-52 protection including suitable PCC foundation as per manufacturer recommendation complete and comprising of the following :- INCOMING (a) 200 A rated copper bus bars with epoxy insulators - 01 Job (b) MCCB, 4 pole, 200 Amps, with ultimate breaking capacity of 36 KA at 415V, with thermal magnetic release, 415 Volts, 25 KA, thermal overload setting 70% to 100%, short circuit setting 5 to 10 times, over voltage and shunt release all as specified and directed - 01 No OUTGOING (c) MCCB 3 pole 63 Amps, 415V, 25 KA - 02 Nos (d) FASD starter suitable for pump set - 02 Nos (e) MCB SPN 32A, 230 V- 2 No. (f) Digital Voltmeter 0 to 500 Volts- 1 No. (g) Digital Ammeter 0 to 200 A with CTs- 1 No. (h) Phase indicating lamp L E D type -set of three incoming. (i) Complete wiring of panel board with suitable size of PVC insulated copper conductor cables.

EXTERNAL ELECTRIFICATION

Supply, installation, testing, commissioning of energy efficient (level 2) 1250 kVA, 22/0.433 kV, oil immersed, ONAN cooled, 3- Phase step-down distribution transformer indoor type suitable for 22 kV, 50 Hz distribution and conforming to IS: 1180 (Part- 1): 2014, including first filling of natural easter vegetable oil, conforming to IS: 16659- 2017, having dielectric breakdown strength ≥ 65 kV at 2.5mm gap, CRGO bolt-less prime grade core, M4 or better directly from reputed manufacturers like Nippon / Posco/ AK steels ensures high endurance of core HV & LV windings wound from super enamel covered electrolytic grade copper conductor with tapping on the HV winding for variation of HV voltage within range of +5% to -15% in steps of 2.5%, hermatically sealed corrugated tank, HV/LV cable boxes complete with all standard fittings/accessories and mounted on a platform as per manufecturer's recommendation as specified and directed.

The transformer shall conform to the following specific parameters: [i] System Voltage: 22 kV [ii] Rated Voltage (HV/LV): 22 /0.433 kV [iii] Frequency: 50 Hz ±3% [iv] No. of Phases: 3 [v] Connection (HV/LV): Delta / Star (neutral brought out) [vi] Vector Group: Dyn-11 [vii] Type of Cooling: ONAN [viii] Audible Sound Level: < 75 dB [ix] Insulation Level: (1) HV Peak Impulse Voltage: 75 kV (2) HV Power Frequency Voltage: 28 kV (3) LV Power Frequency Voltage: 2 kV [x] Impedance: 6.25% [xi] Maximum Losses: (1) at 50% loading: 5.05 kW (2) at 100% loading: 15 kW [xii] Cable Box Clearance: (1) HV: 127 mm Phase to Phase; 76 mm Phase to Earth (2) LV: 45 mm Phase to Phase; 20 mm Phase to Earth

[xiii] Terminal Markings: (1) HV: 1U, 1V, 1W (2) LV: 2u, 2v, 2w, 2n [xiv] Off Circuit Tap Changer (OCTC): ±7.5% in steps of 2.5% The following standard fittings/accessories shall be provided along with the transformer: [i] Non-detachable rating & terminal marking plates [ii] Monogram plate [iii] Lifting lugs for main tank & top cover & jacking lugs [iv] Top filter valve [v] Drain cum bottom filter valve [vi] Oil sampling valve [vii] Earthing terminals with lugs: 2 Nos. [viii] Storage & instruction plate [ix] Skid type under base [x] Bi-directional plain/flange rollers [xi] Detachable type radiators with top & bottom shut-off valve [xii] WTI & OTI with alarm & trip contact [xiii] Marshalling box [xiv] Magnetic Oil level gauge low oil level alarm contact

NOTES: [i] The bidder shall furnish dimensional drawings of the items offered indicating all the fittings, dimensional tolerances, typical GADs of the windings with details of insulation at each point and core construction, etc. for approval of GE. [ii] Contractor shall submit the technical drawing, Constructional drawings, safety features drawing etc for approval of GE.

S & F Indoor Extensible RMU having two nos of Load Break switch and two Nos of VCBs 22KV, 630Amps rated breaking capacity with shorttime withstand current of 16kA for 3 seconds switch disconnector with self powered non-directional solid state relay and shunt trip coil and under voltage coil for transformer protection systems and function for motorised operation and network remote control incl foundation as per OEM instruction inter-lock arrangement between switch disconnectors all as spd and directed of Make- Scheider / ABB/ C&S over current and earth fault relays (Micro processor based). (i) Cable box with cable cover interlock for front termination of the cable suitable upto 2 R x 3core 120sq.mm (XLPE) for Load break switch and upto 1R x 3core 120sq.mm(XLPE) for VCB feeder.Cable door should be as per IP54 and manufacturer design and specification.

Supply, installation, testing and commissioning of 22kV, 630A, compact type out door VCB SF6 rated capacity of 40kA for 3 second with breaking capacity of 16kA for 3 second with self powered non-directional IDMT (Inverse definite minimum time) over current and earth fault relays (Micro processor based) to be installed with existing compact RMU in extension and to match the existing make and model (i) Cable box with cable cover interlock for front termination of the cable suitable upto 2 R x 3core 120sq.mm (XLPE) for Load break switch and upto 1R x 3core 120sq.mm(XLPE) for VCB feeder.Cable door should be as per IP54 and manufacturer design and specification.

8. NO/NC contact for: • Isolator ON/OFF • Earth Switch ON/OFF • Fault Indicator Operated Command Output for: • Isolator Close • Isolator Open • FPI reset 1 Set 9. Mechanical interlock between incomers 10. Resin cast, Ring Core CTs of suitable capacity for protection (Acc.Cl.5P10), installed away from bushings to prevent saturation of core. CT ratio to be confirmed during drawing approval- 03Nos. Bus PT : 3Nos. Potential transformers with HT fuse on primary side and MCB on secondary side for protection and primary voltage:22000:V3v & secondary voltage: 110:V3v with burden winding 50VA , class of winding 1 - 1Set (B) Outgoing :- VCBs, SF6 insulated Motorized Breaker module - 02 Nos and each VCB,s Breaker comprising of following accessories :- (i) 22kV, 630A fixed-type Vaccum Circuit Breaker module for making and breaking of fault current alongwith disconnector+Earth Switch of full making capacity (ii) Short time current 16 to 20KA/ 3sec, breaking Capacity (iii) Auxiliary contacts - 1NO + 1NC

(iv) Manual/motorized spring-charging, associated closing/tripping coils, (v) Spring-charging operating handle and ON/OFF push buttons mechanically latched to the mechanism (vi) Cable box with cable cover interlock for front termination of the cable suitable upto 2 R x 3core 185sqmm (XLPE) for Load break switch and upto 1R x 3core 185sqmm(XLPE) for VCB feeder.Cable door should be as per IP54 and manufacturer design and specification. (vii) Numerical based self-powered OC+EF Protection Relay, providing Over Current (min. setting 20%), Earth-Fault (min. setting: 10%) (viii) Resin cast, Ring Core CTs of suitable capacity for protection (Acc.Cl.5P10), installed away from bushings to prevent saturation of core. CT ratio to be confirmed during drawing approval -03 Nos. (ix) Cable covers with self Interlocking mechanism between doors, earth switch, disconnector & VCB (x) Capacitive voltage indication fixed type system (xi) Mechanical Indications for breaker ON, OFF, EARTH, Spring Charged-Discharged

Supply, laying HT XLPE insulated screened,earthed, PVC bedded, galvanized steel strip armoured, electric power cable (heavy duty) of size 3 core 120sqmm with aluminium conductor siutable for 22kV grade as per IS 7098 Part-II including latest amendment for IS ( ISI marked cable) testing, commissioning along with complete laid in trenches duct etc. all as specified and directed

Supply and fix cable jointing kit for 22 KV grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm.

Supply, installation, testing and commissioning of factory made, CPRI type tested /approved, indoor cubical compartmental type MAIN LT PANEL of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB

[vi] LED phase indicators (Red, Yellow, Blue)- 05 Set [vii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 05 Nos. NOTES: [i] The Panel shall be completely Ethernet communication ready to communicate with Energy Management System. [ii] 06 Nos. of ON / OFF / TRIP status and operations counters as well as meters shall be wired to Ethernet gateway part of the Panel. [iii] The bidder shall furnish dimensional drawings of the items offered, indicating all the fittings, dimensional tolerances, typical GADs, etc. with details of insulation at each point and core construction, etc. for approval of the Garrison Engineer.

Supply, installation, testing and commissioning of factory made, CPRI type tested /approved, indoor cubical compartmental type UTILITIES PANEL of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB

[iii] 80 A, 415 V, Ics = 100% Icu = 50 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alarm & Overload), etc.- 01 Nos. [iv] LED phase indicators (Red, Yellow, Blue)- 03 Set [v] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 03 Nos. NOTES: [i] The Panel shall be completely Ethernet communication ready to communicate with Energy Management System. [ii] 04 Nos. of ON / OFF / TRIP status and operations counters as well as meters shall be wired to Ethernet gateway part of the Panel. [iii] The bidder shall furnish dimensional drawings of the items offered, indicating all the fittings, dimensional tolerances, typical GADs, etc. with details of insulation at each point and core construction, etc. for approval of the Garrison Engineer.

Supply, installation, testing and commissioning of free-standing indoor semi-compartmentalised cubical type 400 kVAr APFC CAPACITOR BANK made out of 2.0 mm thick CRCA sheet and built upon rigid framework, having MPP type capacitor with 7% aluminium wound reactor units type tested in accordance with IS 16636: 2017 with contactor switching, IP 4X protection and including air system provided by axial flow fan or centrifugal fan, control wiring with FR-LSH copper wires complete all as directed by engineer-in-charge. Make: L & T, Schneider, Siemens, ABB The APFC Capacitor Bank shall comprise of the following: [i] 400 A, 415 V, Ics = Icu = 36 kA, 50 Hz, TP MCCB with adjustable overload settings, adjustable short-circuit settings, adjustable earth- fault settings, current limiting type double break roto active type, instantaneous protection and microprocessor based trip unit- 01 Nos. [ii] High performance microprocessor based APFC relay with auto / manual switch option- 01 Nos. [iii] 3- Phase power analyser with in-built digital VAF meter, phase indicating LED lamps (R, Y, B), step indicating LED lamps, ON / OFF push buttons, timer, CT- 500/5 A, Cl1.0, 15 VA- 01 Nos. [iv] MPP capacitor of 400 ( 2 X 100 + 3 X 50 + 2 X 25) kVAr

[v] 25 kVAr- 02 STEPS [a] 50 A, 415, Ics = 100% Icu = 36 kA, 50 Hz TP MCCB with fixed magnetic settings and adjustable thermal settings- 01 Nos. [b] 3P, 25 kVAr power contactor, 415 V, 50 Hz 230 VAC coil- 02 Nos. [c] 7% detuned reactor, 3- Ph, 25 kVAr, 440 V, 50 Hz- 02 Nos. [vi] 50 kVAr- 03 STEPS [a] 50 A, 415, Ics = 100% Icu = 36 kA, 50 Hz TP MCCB with fixed magnetic settings and adjustable thermal settings- 01 Nos. [b] 3P, 50 kVAr power contactor, 415 V, 50 Hz 230 VAC coil- 03 Nos. [c] 7% detuned reactor, 3- Ph, 50 kVAr, 440 V, 50 Hz- 03 Nos. [vii] 100 kVAr- 02 STEPS : [a] 200 A, 415, Ics = 100% Icu = 36 kA, 50 Hz TP MCCB with fixed magnetic settings and adjustable thermal settings- 02 Nos. [b] 3P, 50 kVAr power contactor, 415 V, 50 Hz 230 VAC coil- 02 Nos. [c] 7% detuned reactor, 3- Ph, 50 kVAr, 440 V, 50 Hz- 02 Nos. NOTES: [i] The Panel shall be completely Ethernet communication ready to communicate with Energy Management System. [ii] The bidder shall furnish dimensional drawings of the items offered, indicating all the fittings, dimensional tolerances, typical GADs, etc. with details of insulation at each point and core construction, etc. for approval of the Garrison Engineer.

S & F LED 45 watt streetlight having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of > 100 lm/W, integral SMPS based constant current electronic LED driver with THD < 10%, surge voltage protection and other safety tests as per IS 15885 (Part- 2/Sec- 13): 2012, IP 66 protection, polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm OD 35 mm to 42 mm, including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket having 40 mm diameter light grade GI pipe, nuts, bolts, washers, GI clamps with tw coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by engineer- in- charge. Make: BAJAJ, Philips, Havells

S & F weather- proof PVC junction box of size 250 mm x 200 mm x 100 mm, having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos. of polymide gland with check nuts fixed on poles with flat aluminium clamps of size 20 mm x 3 mm, nuts, bolts, washers, etc. complete all as specified and as directed by engineer- in- charge. Make: Sintex, Hensel, HPL

Supply, installation, testing and commissioning of intelligent street light control (ATSC) suitable for 6 kW maximum load, wall/pole mounted, having built-in networking support, built-in astronomical timer, 32 A TP contactor, 40 A TPN MCB housed in 3.15 mm thick powder CRCA sheet housing all complete as specified and directed by engineer- in- charge. Make: Havells, HPL, Insu

M&L for HT 22 KV cable cast iron route indicator of dia 150mm duly embosed 'MES U/G HT CABLE 22KV' including PCC all as spd and directed.

S&F 7 metre long hot dipped galvanised octagonal poles with top A/F 70 mm bottom A/F 130 mm ,made out of 3 mm thick HT sheet alongwith base plate of size 220x220x12mm ,including 1500 mm long single/double arms bracket made out of 48 mm dia,GI pipe,M20 in PCD 205 mm,700mm long and projected 100mm,"J" type EN8 grade set of 4 Nos foundation bolts along with tempalates,also including provision of the followings :- a)MCB,SP,6A,230v,B series,10KA mounted on and including 3 mm thick plastic laminated sheet-01 No. b) 4 way connector ,bolt type having locking arrangement,weather proof and water proof control space: 01 No. Notes :- a) RCC foundation of grade 1:2:4 type B1 having reinforcement of 12 mm dia with the spacing of 200 mm centre to centre all as per drawing enclosed having foundation depth of 1meter below ground level and 20 cm above ground level with 2 no of 63 mm PVC Pipe for cable entry and cable exit including 4 Nos of ‘J’ type foundation bolts of length 700mm of 20 mm dia anchored in foundation bolts. 125mm projected above RCC for fixing base plate for housing octagonal pole of 7m height. All as shown in drawing including necessary excavation, earthwork and backfilling including use and waste of form work all as specified and directed. The rate quoted shall also be deemed to include the cost for The concrete for foundation ,Reinforced and form work b) The rate quoted shall also be deemed to include the cost for connecting with including suitable lugs of the existing incoming and outgoing LT UG cable of any size in the pole box of new octagonal pole. Make :- Bajaj or its equivalent in Crompton/Phillips/Wipro as approved by the GE.

S&F Decorative Post top lantern for 360° indirect light complete with LED lamp 40 watt and its accessories with IP 65 protection, resitant to impact and corrosion. Glare-free and better uniformity including necessary fixing arrangements on gate Pillars (i.e. GI Pipe & PCC) all as specified and directed by engineer-in-charge. Model: MAPLE (Cat No. LPTO-40-CDL) of make- Crompton or equivalent Make: BAJAJ, Philips, Havells

S&F Bollard LED light Pressure die cast powder coated housing with PC diffuser, Efficient high output LED 10 watt lamp complete with IP 66 protection including necessary fixing arrangements on road side including coping all as specified and directed by engineer-in-charge. Model: MATA I (Cat No. LBLA1-10-CDL) of make- Crompton or equivalent Make: BAJAJ, Philips, Havells

S&F weather-proof PVC junction box of size 250 mm x 200 mm x 100 mm, having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos. of polymide gland with check nuts fixed on poles with flat aluminium clamps of size 20 mm x 3 mm, nuts, bolts, washers etc. complete all as specified and as directed by engineer-in-charge. Make: Sintex, Hensel, HPL

M&L for 1.1 kV grade aluminium conductor, XLPE insulated armoured cable of size 6sqmm two core conforming to IS 7098 (Part 1): 1988, having stranded aluminium compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete all as specified and directed by engineer-in-charge.

NIGHT LIGHTING

S & F skirting light, 3 module (67.5 mm X 45 mm) in size for installation close to obstacle with standard white light LED 230 V Make : Legrand Model: Myrius complete all as specified and directed by engineer-in-charge. Make: Legrand, Philips, Wipro NOTE: Point wiring with necessary accessories and DBs has been considered in Internal Electrification schedule.

SHADOWLESS LIGHTING

S & F Operation theatre light with reflection performance of 3rd generation LED technology double dome type having input voltage of 230 V AC ± 10%, 50 Hz, having diameter of the dome more than 500 + 500mm with a light output of 120000 lux + 120000 lux, field size 120-350mm dia, Colored temperature - 4300 ± 200° K, Working distance- 50-180cm, having Multi position Spring arm for comfortable surgery, Number of LEDs minimum 54 + 54 Nos, Ceiling & Arm rotation 360°, Intensity control panel focusing by Serializable handle confirming to IEC-60601/1/2/41, EN 1041/980, EN ISO-9001-2018, EN ISO Model: LED5050 as per Make Dr. Med or equivalent complete in all respect as specified and directed by engineer-in-charge.

S & F standard shadowless light fitting having lilluminance greater than 70000 lux and complete with emergency power unit & battery back up for min 30 minutes (1 KVA), having dome of 810 mm diameter, fully counter balanced moveable on ceiling trolley having a minimum longitudinal travel of 1350 mm and axial rotation of 360˚, suitable for operation on 230 V, 1-Ph, 50 Hz AC Supply Model: Hexawave single dome 90k or equivalent Philips complete in all respect as specified and directed by engineer-in-charge.

EMERGENCY PORTABLE LIGHTS

S & F 60-LED rechargable batten (white) having long life lithium ion battery, bright light with 300 lumens, charging time not more than 12 hrs, adjustable brightness: high- 5 hrs, low- 10 hrs, slim construction allowing easy mounting, tug switch for easy operation and power consumption not more than 4 W all complete as specified and directed by engineer-in-charge. Make: Philips, Havells, Wipro

CONDUITS FOR LAN/TV/TELEPHONE

Supply and fixing Tele/ Intercom socket outlet RJ 11 with shutter flush type ISI marked complete all as specified.

S & F modular type 1 module TV socket complete all as specified and directed.

Supply and fixing computer socket 1 modules type ISI marked complete all as specified.

Supply and fixing metal flush Boxes of Junction Box of 18 modules

Supply and fixing Telephone Junction Box foxed key style secured lock, easy to open door spacious design of plastic size : 95 x 7.5 x 3.5 inches

MEDICAL GAS SUPPLY

Supply and fix medical Gas supply pipe line system comprising of following:-

Oxygen System 4+4 Manifold with tail pipe and NRV 4 + 4 size of oxygen manifold complete with middle frame, chains, NRV's and 8 nos. pig tail pipes. Manifold shall consist of two high-pressure header bar assemblies to facilitate connection of primary and secondary cylinder supplies. Each header bar shall be provided with 8 numbers (as per hospital requirement) of cylinder pigtail connections to suit cylinder valves as per IS 3224 incorporating a check valve at the header connection. Manifold should be suitable to withstand a pressure of 150 Kg/cm2, along with high pressure copper annealed tail pipes with end Brass adapter suitable for Cylinders and manifold. The high-pressure header bar shall be designed in such a manner that it can be extended to facilitate additional cylinder connections. Each header bar assembly shall be provided with a high-pressure shut-off valve. Top frame comprising of high pressure copper pipes of size 1/2” I.D. x 15swg with high pressure brass fittings made of high tensile brass and connections through non- return valve high pressure copper tail pipes, made of high pressure copper pipe of size 1/4” I.D. x 15 swg. # The manifold should be so designed that it shall suit easy cylinder Changing and position

Fully Automatic Control Panel for Oxygen: Control Panel have two first stage regulators, each capable of delivering 120 psig outlet pressure. The First stage regulator connected to the second stage regulator which will deliver an outlet pressure of 60 psi. The First two regulators meant for first stage will be capable of switchover system incorporated from “Running” to “Reserve” bank due to differential pressure. The Control Panel provide for two individual content contact pressure gauges to indicate the cylinder pressure in the two wings of the manifold and common pressure gauges to indicate the delivery/line pressure. Control panel have audio alarm for bank changeover. The control panel has built in signal lamp indications for changeover. Control panel covered with suitable cover indicating the respective services

Oxygen Emergency 2 Cylinder manifold with tail pipe and NRV 2 size of oxygen manifold complete with middle frame, chains, NRV's and 2 nos. pig tail pipes. Manifold shall consist of two high-pressure header bar assemblies to facilitate connection of primary and secondary cylinder supplies. Each header bar shall be provided with 2 numbers (as per hospital requirement) of cylinder pigtail connections. Manifold should be suitable to withstand a pressure of 150 Kg/cm2, along with high pressure copper annealed tail pipes with end Brass adapter suitable for Cylinders and manifold. Top frame comprising of high pressure copper pipes of size 1/2” I.D. x 15swg with high pressure brass fittings made of high tensile brass and connections through non- return valve high pressure copper tail pipes, made of high pressure copper pipe of size 1/4” I.D. x 15 swg. # The manifold should be so designed that it shall suit easy cylinder Changing and position

Emergency Oxygen Regulator

Oxygen Outlet with probe Gas outlets (Indigenous) As per HTM02 -01/ 2022 / NFPA99 & shall be CE Certified Terminal Units (Gas Outlets) with SS Probes/Adaptors for O2, N2O, Compressed Air (4), Air 7 bar, Vacuum Front Loading Type Terminal Outlets should be designed to dispense medical gases (or an inlet for medical vacuum) to the secondary equipment (flow meters, Suction regulators, etc.) at the point of use and is gas specific so that secondary devices cannot be "attached" to the wrong gas. When not in use the gas in a nonflowing state within the Outlet (Terminal unit) sealed by "O" ring. The adapter when inserted pushes the poppet inside and the gas starts flowing and sealing is ensured by the "O" ring or a seat. The Outlets are Quick Connect Type and gas specificity is accomplished by "geometric indexing." The outlets should have following features:- • Push to insert and press-to-release mechanism for probes. • Allows plugging of probes from front. • Self-sealing valve on disengaging the probe (Quick disconnect) • Non return valve for on line servicing/ repairing • Geometric Indexed to eliminate inter-changeability of gas services • Color-coded gas specific front plate • Totally leak proof, safe & easy to operate

BPC flow meter with humidifier bottle BACK PRESSURE COMPENSATED FLOWMETER : Sturdy and reliable Flow Meter Unit for an accurate measuring of flow of gases. Chromium plated Brass Body Metering tube and cover made of Unbreakable Poly carbonate Flow adjustment by Needle Valve equipped with inlet filter- 100um Flow rate range 0- 15 liters per minute Read the flow on the center of the ball Inlet pressure 60 psi Bubble Humidifier : With Lid made of ABS Plastic, Jar made of Poly Carbonate, Valve pressure Brass Chromium plated

Nitrous oxide 2 Cylinder manifold system with tail pipe and NRV 2 size of N2O manifold complete with middle frame, chains, NRV's and 2 nos. pig tail pipes. Manifold shall consist of two high-pressure header bar assemblies to facilitate connection of primary and secondary cylinder supplies. Each header bar shall be provided with 2 numbers (as per hospital requirement) of cylinder pigtail connections to suit cylinder valves as per IS 3224 incorporating a check valve at the header connection. Manifold should be suitable to withstand a pressure of 150 Kg/cm2, along with high pressure copper annealed tail pipes with end Brass adapter suitable for Cylinders and manifold. The highpressure header bar shall be designed in such a manner that it can be extended to facilitate additional cylinder connections. Each header bar assembly shall be provided with a high-pressure shut-off valve. Top frame comprising of high pressure copper pipes of size 1/2” I.D. x 15swg with high pressure brass fittings made of high tensile brass and connections through non- return valve high pressure copper tail pipes, made of high pressure copper pipe of size 1/4” I.D. x 15 swg. # The manifold should be so designed that it shall suit easy cylinder Changing and position

Fully Automatic Control Panel for Nitrous oxide Control Panel have two first stage regulators, each capable of delivering 120psi outlet pressure. The First stage regulator connected to the second stage regulator which will deliver an outlet pressure of 60 psi. The First two regulators meant for first stage will be capable of switchover system incorporated from “Running” to “Reserve” bank due to differential pressure. The Control Panel provide for two individual content contact pressure gauges to indicate the cylinder pressure in the two wings of the manifold and common pressure gauges to indicate the delivery/line pressure. Control panel have audio alarm for bank changeover. The control panel has built in signal lamp indications for changeover. Control panel covered with suitable cover indicating the respective service

Nitrous oxide Emergency single cylinder manifold with tail pipe and NRV. 2 cylinder manifold system with tail pipe and NRV 2 size of N2O manifold complete with middle frame, chains, NRV's and 2 nos. pig tail pipes and single cylinder emergency. Manifold shall consist of two high-pressure header bar assemblies to facilitate connection of primary and secondary cylinder supplies. Each header bar shall be provided with 3 numbers (as per hospital requirement) of cylinder pigtail connections to suit cylinder valves as per IS 3224 incorporating a check valve at the header connection. Manifold should be suitable to withstand a pressure of 150 Kg/cm2, along with high pressure copper annealed tail pipes with end Brass adapter suitable for Cylinders and manifold. The highpressure header bar shall be designed in such a manner that it can be extended to facilitate additional cylinder connections. Each header bar assembly shall be provided with a high-pressure shut-off valve. Top frame comprising of high pressure copper pipes of size 1/2” I.D. x 15swg with high pressure brass fittings made of high tensile brass and connections through non- return valve high pressure copper tail pipes, made of high pressure copper pipe of size 1/4” I.D. x 15 swg. # The manifold should be so designed that it shall suit easy cylinder Changing and position

Nitrous oxide Outlet with probe Gas outlets (Indigenous) As per HTM02 -01/ 2022 / NFPA99 & shall be CE Certified Terminal Units (Gas Outlets) with SS Probes/Adaptors for O2, N2O, Compressed Air (4), Air 7 bar, Vacuum Front Loading Type Terminal Outlets should be designed to dispense medical gases (or an inlet for medical vacuum) to the secondary equipment (flow meters, Suction regulators, etc.) at the point of use and is gas specific so that secondary devices cannot be "attached" to the wrong gas. When not in use the gas in a nonflowing state within the Outlet (Terminal unit) sealed by "O" ring. The adapter when inserted pushes the poppet inside and the gas starts flowing and sealing is ensured by the "O" ring or a seat. The Outlets are Quick Connect Type and gas specificity is accomplished by "geometric indexing." The outlets should have following features • Push to insert and press-to-release mechanism for probes. • Allows plugging of probes from front. • Self-sealing valve on disengaging the probe (Quick disconnect) • Non return valve for on line servicing/ repairing • Geometric Indexed to eliminate inter-changeability of gas services • Color-coded gas specific front plate • Totally leak proof, safe & easy to operate

Duplex compressed air plant complete with each compressor should have minimum free air delivery of 650 LPM.1 air receiver, 1 air purufication system to ensure medical air quality, pressure reducing station, control panel, automatic drain valves, ball valves etc. Air compressor. with Heatless Type Dryer & After Cooler with Moisture Separator The air compressors should be mounted on rubber-in-shear vibration mounts and connected through union type flexible connections both on the receiver and discharge sides. The capacity of the air receiver should be of 1000 Liters +/- 100. Air receivers should comply with BS EN 286-1:1998 / IS 2062, and should be supplied with test certificates. The hospital connections should be taken from the receiver. Each compressor should be associated with heat air drier with dew point not less than minus 40 C and after cooler cum moisture separator. An on-line Dew point monitor should be incorporated in the system to check up the efficiency of the Drier. Dew point monitor with CO2 3 Stage filteration system:

There should be duplex arrangement of three types of filters for filtering 1. 5 μm intake filter is preferred to avoid blockage of internal (air/oil separators) 2. Dust filter downstream of the dryers to remove particles down to 1 μm, with a DOP penetration of less than 0.03%, when tested in accordance with BS EN ISO 3549:2002. Duplex Activated carbon filters should be installed upstream of the final bacteria filter for odor removal. Bacteria filters should be fitted upstream of the final pressure regulator with appropriate isolating valves. The filters should provide particle removal to 0.01 mg/m3 and a DOP penetration of less than 0.0001%. A safety valve, pressure gauge and inspection door (manhole) to be provided for air receiver. All moisture separators should be fitted with auto drain trap. Test point comprising of shut-off valve and terminal unit should be provided to permit sampling of compressed air quality.Pressure Regulating System complete with valves for 4 Bar & 7 Bar. FORCED Draft cooling Tower of 20 TR capacity The European Pharmacopoeia (Ph. Eur.) specifies maximum impurity levels for carbon monoxide.

Medical Air Outlet with probe Gas outlets (Indigenous) As per HTM02 -01/ 2022 / NFPA99 & shall be CE Certified Terminal Units (Gas Outlets) with SS Probes/Adaptors for O2, N2O, Compressed Air (4), Air 7 bar, Vacuum Front Loading Type Terminal Outlets should be designed to dispense medical gases (or an inlet for medical vacuum) to the secondary equipment (flow meters, Suction regulators, etc.) at the point of use and is gas specific so that secondary devices cannot be "attached" to the wrong gas. When not in use the gas in a non-flowing state within the Outlet (Terminal unit) sealed by "O" ring. The adapter when inserted pushes the poppet inside and the gas starts flowing and sealing is ensured by the "O" ring or a seat. The Outlets are Quick Connect Type and gas specificity is accomplished by "geometric indexing." The outlets should have following features:- • Push to insert and press-to-release mechanism for probes. • Allows plugging of probes from front. • Self-sealing valve on disengaging the probe (Quick disconnect) • Non return valve for on line servicing/ repairing • Geometric Indexed to eliminate inter-changeability of gas services • Color-coded gas specific front plate • Totally leak proof, safe & easy to operate

Duplex Vaccum plant complete with each vaccum pump should have minimum free air aspirated of 1699 LPM at 450 mmHg, 1 Vaccum receiver, secretion trap, bacteria double filter, control panel, ball valves, pumps each of 22 cfm capacity. Specification of Pumps: Single stage, three cylinders , • Type of Drive : V Belt , (Directly driven more energy efficient) • Type of Motor : TEFC , • Motor HP : 10 , M +/-25, • Maximum Vacuum : 750 m Hg • Piston Displacement : 4235 LPM • Each Vacuum Pump should be supplied complete with Base Plate. • Vacuum Pump15VX10 of 4235 lpm+/-25 -2nos. • 10 HP 3 phase electric motors-2nos. • Automatic drain valve-2nos. • Vacuum Pressure Guage-1no. • Brass NRV-2nos. •Vacuum Reservoir as per specification of 2000 liter capacity please note that the water capacity of the reservoir should be equal to the plant design flow. •The reservoir should be manufactured in accordance with BS EN 286- 1:1998, with test certificates provided to the user. The minimum test pressure should be 4 bar. Pump noise should be less than 82 dbA at 1 m.

Vaccum outlet with probe. Gas outlets (Indigenous) As per HTM02 -01/ 2022 / NFPA99 & shall be CE Certified Terminal Units (Gas Outlets) with SS Probes/Adaptors for O2, N2O, Compressed Air (4), Air 7 bar, Vacuum Front Loading Type Terminal Outlets should be designed to dispense medical gases (or an inlet for medical vacuum) to the secondary equipment (flow meters, Suction regulators, etc.) at the point of use and is gas specific so that secondary devices cannot be "attached" to the wrong gas. When not in use the gas in a non-flowing state within the Outlet (Terminal unit) sealed by "O" ring. The adapter when inserted pushes the poppet inside and the gas starts flowing and sealing is ensured by the "O" ring or a seat. The Outlets are Quick Connect Type and gas specificity is accomplished by "geometric indexing." The outlets should have following features:- • Push to insert and press-to-release mechanism for probes. • Allows plugging of probes from front. • Self-sealing valve on disengaging the probe (Quick disconnect) • Non return valve for on line servicing/ repairing • Geometric Indexed to eliminate inter-changeability of gas services • Color-coded gas specific front plate • Totally leak proof, safe & easy to operate

Vaccume meter Major for Wards (600 ml jars) Wall Mountable Ward Vacuum Unit Capacity of Jar – 600ml. Flow Range Control 0 To 700 Mm./Hg. Over Flow Safety Valve Provided In The Lid Assembly LID Made Of ABS Plastic Jar Made Of Unbreakable Poly Carbonate Jar Can Be Steam Sterilized Up To 134 Degree Celsius Vacuum Control Regulator With ON/OFF Knob It will be supplied with high pressure hose at inlet and low pressure hose at collection end of the jar.

Vaccume meter Major for O.T (2000 ml jars) Unbreakable Poly Carbonate Collection jars 2 Nos Capacity 2000ml each ABS Lid with over flow safety valve. Special 3 way valve provided to operate either left hand side or right hand side and also both can be operated simultaneously. Regulator provided to control the negative pressure from 0 to 700 mm./ Hg. with ON /OFF knob. All the items should assembled on a Aluminum powder coated trolley with castors for ease of mobility With 1 mtr high pressure hose at inlet and 2 Mtr low pressure hose at collection end of the jar.

Supply and fix Copper pipe-medical Grade Copper Tubes of wall thickness not less than 0.9 mm and fittings

28 MM D Copper Pipes

22 MM D Copper Pipes

15 MM D Copper Pipes

12 MM D Copper Pipes

NOTE:- (For Srl item Nos 32.20 to 32.23) Solid drawn seamless, deoxidized, non arsenical, half hard, tempered and degreased copper pipe conforming to All Copper pipes should be degreased & delivered capped at both ends. The Copper Piping being installed shall be certified by LLOYDS. A certificate to effect shall be submitted along with the delivery of the pipes Material for pipes should be manufactured from phosphorus deoxidized, non-arsenical copper to : BS EN 13348:2001 – R250 (half hard) for sizes up to 54 mm; or BS EN 13348:2001 – R290 (Hard) for larger sizes. The pipes should be accompanied with manufacturers test certificate for the physical properties & chemical composition. The manufacturer should comply with BS EN ISO 9001:2000 for pipes and for all materials including fittings, terminal units. Installation : Installation of piping shall be carried out with utmost cleanliness. Only pipes, fittings and valves which have been degreased. Pipe fixing clamps shall be non-ferrous or non- deteriorating plastic suitable for the diameter of the pipe. TEST: After erection, all the pipes cleaned or purged with gas, and complete new system will be tested at 1 1/2 times of working pressure for 24 hours. Painting : All existing and proposed exposed pipes will be painted with two coats of synthetic enamel paint & color codification as per IS-2379 of 1963

Supply and fix Valve Medical Grade (Make-IBP convex) UK 15 MM Isolation Valve

Area Alarm Panel (4 Gas)

Area Alarm Panel 3 Gas)

Area Alarm Panel (2 Gas)

NOTE:- (For Srl item Nos 32.26 to 32.28) It must be CE Marked as per Medical Device Directive. Medical gas alarm should be capable of monitoring all gases by means of pressure sensors. The alarm should be supplied in 1gas+1vac, 2 gas+1vac, 3gas+1vac and 4 gas+1 vac configurations. The medical gas alarm should fulfill the requirements of DIN EN ISO 7396-1, HTM 02-01. Each gas service be displayed the colored LED’s High and low pressure should be indicated by red LED’s and normal pressure be indicated by green light. An audible warning should sound with any failure indication and a mute facility should be provided. This facility should automatically reset when gas supply comes to normal position. A battery backup is provided with the alarm so, that alarm panel functions normally in the event of power failure. A test switch should provide to check the proper functioning of the audio and visual alarming

Isolation Valve Box (4 Gas)

Isolation Valve Box (3 Gas)

Isolation Valve Box (2 Gas)

NOTE:- (For Srl item Nos 32.30 to 32.32) It should be surface mounted with lockable cover, breakable front panel for access to the valves in emergency. It should include line pressure monitoring gauges. Available in two, three, four & five valve configuration suitable for valve from 15mm to 28mm. valves is manufactured by ISO certified company.

Supply and fix Jumbo Cylinder Trolley

Supply and fix Cylinder testing gauge. (Oxygen/ N2O)

Supply and fix F A Valve with gauge and humidifier bottle.

Aluminium Extruded Bed head Panel 1 meter long with Medi-rail, provision for Gas Outlets and switch sockets (per Bed Total Bed (30+1) Heat Stroke Room) Bed Head Panel As per HTM02 -01/ 2022 / NFPA99 & shall be CE Certified Efficient, safe & Robust design in extruded aluminium section. Smooth curved surfaces & choice of base color and fascia plates The headwell system should be constructed of aluminium extrution jointed together to fome a carcase to suit the particular application units should be factory assembled for mechanical and electrical components. Front fascia plate should be removable individually to access for respective service. All down drops should be installed at one end preferably & Vertical drop installed at one end should be covered with Aluminum boxing with matching color. Entire pipe line should run in continuous horizontal panels with no break for each unit & length as per area where it has to be installed. Each bed head unit shall be supplied with electrical and 6 (six) electrical outlets prefitted, wired and certified, (wired up to the distribution box provided with leakage protection). Bed head should have provision for Facility per unit as under: Oxygen Vacuum Medical Air Nurse call switch - 1 Electricals

Supply, install, test and commissioning of double dome ICU pendent double ceiling supply unit (wet and dry arm concept) made of non rusting high strength aluminum alloy robust design colume head type with break and consting the following 1st Arm Length 700mm + 700 mm Gas Outlets- 3 Nos Electrical Outlets 10Nos data outlets -2 Nos CVP Pole with holder 2 Nos 2nd Arm -Length 700mm + 700 mm Gas Outlet- 6 Nos Electrical Outlets. 10 Nos data outlets -2 Nos Trays for patients monitor and equipment -2 Nos Pendant As per HTM02 -01/ 2022 / NFPA99 & shall be CE Certified The pendant horizontal & drop tube is of mild steel Powder coated (Colour as per customer choice ) • The length of horizontal tube is 600mm long and vertical tube is as per height of OT. • Pendant carrying capacity of 75 kg equipment load pendant rotate at 330°. • Encapsulated central pivot bearing system sealed for life and free maintenance. • Pendants having heavy platfarm shelf for keeping monitor. • 8 switch and sockets 5\15 Amp is provided

Supply, install, test and commissioning of single arm pendents with 1 No. swiveling arm with main controls movement up to 320° and Gas outlets & electric switch sockets • Provision of any standard gas outlet points.‐ 5 nos. • Main cabinet is made up of aluminium • Double bearing used (not single) for free movement. • Rotation will be 330 degree from the both sides bottom cabinet side and top side • Top side round canopy is provided for the aesthetics look. • Service window is provided from the side. Infusion pump pole and IV stand combined be installed as moduler pendants

AIR CONDITIONING

Supply, installation, testing and commissioning of AHRI certified, factory designed, pre-fabricated and floor-mounted twin screw type water cooled chiller machine not less than 230 TR (2 Working + 1 standby) actual capacity at site conditions complete with semi-hermetic screw compressors having independent refrigerant circuits & automatic stepless capacity control, water-cooled S/T type condenser, S/T horizontal flooded type evaporator with carbon steel shell and seamless copper tubes with elastomeric insulation, suitable numbers of squirrel cage induction motor of suitable rating with class 'B' insulation, unit mounted variable frequency drive (VFD) along with necessary drive arrangement, lubrication system as per manufacturer's design required for smooth and trouble-free operation of the chiller package, common base frame, interconnected copper refrigerant piping along with elastomeric insulation, fittings, valves, expansion valves and accessories to interconnect compressor, condenser, chiller and expansion valve, microprocessor based control panel comprising of controls including Sensors, keyboard, LCD touchscreen access input system, protection and monitoring devices to perform control functions , wiring, vibration isolators, gauge panel, automatic safety controls, flow switch at evaporator and condenser and ozone friendly, CFC-free refrigerant all complete as specified and directed by the engineer-in-charge.

The chiller shall conform to the following requirements / specifications: [i] Chilled water inlet/outlet temperature: 12/7 ˚C [ii] Evaporator fouling factor: 0.00010 ⁰Fft²hr/Btu [iii] Evaporator side pressure drop: 3 m of H2O (maximum) [iv] Condenser water inlet/outlet temperature: 32/36 ˚C [v] Condenser fouling factor: 0.00025 ⁰Fft²hr/Btu [vi] Condenser side pressure drop: 6 m of H2O (maximum) [vii] Minimum COP @ 100% load: 5.9 at AHRI condition [viii] Minimum COP @ 100% load: 5.6 at design condition [ix] Minimum NPLV: 0.4 kW/TR at design condition

S & F SS- 304 closed expansion tank of 200 litre capacity with 16mm thick for working pressure of not exceeding 3.5 kgf/cm² vapour pressure or 17.5 kgf/cm² hydrostatic design pressure or pressure rating to suit the system pressure and sized adequately to compensate for water expansion due to operating temperature variations, conforming to IS: 2825- 1969 for 'non-fired pressure vessels' complete with inter-connection piping, non-return valve, safety relief valve and pressure gauge, insulated with 50 mm thick elastomeric insulation and aluminium cladding with 26 SWG aluminum sheet for chilled water pipe line complete with accessories as specified and directed by the engineer-in-charge.

Supply, installation, commissioning and testing of factory made, CPRI type tested /approved, outdoor, cubical compartmental type "HVAC Panel" of suitable size, conforming to IEC 61439-1 &2, IEC 61641, having both sides openable with hinged double doors & locking arrangement and IP 42 protection made out of 3.15 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of size 50 x 50 x 6mm thick, including earthing stud, labeling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enameled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length & size, including fixing lugs, bolts, screws etc. complete with accessories as specified and directed by the engineer-in-charge.

[ii] 80 A, 415 V, Ics = Icu = 16 kA, conforming to IEC 60947- 2, 50 Hz, FP MCCB with adjustable thermal settings & fixed magnetic settings with compression lug connectors and thermal magnetic trip unit (TMD)- 03 Nos. [for chilled water circulation pump] [iii] 40 A, 415 V, Ics = Icu = 16 kA, conforming to IEC 60947- 2, 50 Hz, FP MCCB with adjustable thermal settings (0.70- 1 X In) & fixed magnetic settings with compression lug connectors and thermal magnetic trip unit (TMD)- 05 Nos [for cooling tower and condenser water pump] [iv] 32 A, 415 V, Ics = Icu = 16 kA, conforming to IEC 60947- 2, 50 Hz, FP MCCB with adjustable thermal settings & fixed magnetic settings with compression lug connectors and thermal magnetic trip unit (TMD)- 02 Nos. [for condenser water supply pump] [v] 32 A, 230 V, 50 Hz, SPN MCB (C- curve)- 01 Nos. [for AC Plant Room] [vi] Auomatic star/delta starter for cooling tower motor [15 HP]- 2 Nos [vii] DOL starter for condenser water supply pump [2 HP]- 2 Nos (a) M&L for Automatic star delta starter suitable for 20 HP induction motor (Condenser water pump- 3 Nos) [viii] LED phase indicators (Red, Yellow, Blue)- 14 Set [ix] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 13 Nos.

NOTES: [i] The panel shall be completely Ethernet communication ready to communicate with Energy Management System & shall be Web based application in-built. [iii] The Panel shall be with wireless energy sensor on incomer and outgoing feeders for monitoring (V, I, P, PF, Energy), voltage loss alarm, Unbalance in phases. Same shall be communicated through Ethernet communication gateway to centralised Energy Monitoring System. [iv] M&L for Variable Frequency Drive (VFD) with IP 55 with enclosures and mains disconnect switch comprising of the following complete with accessories as specified and directed by the engineer-in-charge. [a] Built in dual 5% impedance DC link reactor (harmonic filters) on the positive and negative rails of the DC bus of the Variable Frequency Drive. [b] Built in EMC filters (electro magnetic compatibilty filters) for restriction of conducted emissions to comply with IEC61800:3 (unrestricted distribution) :2004 Category C1 (50 meter). [c] Three feedback PID controller having capabilty to simultaneously accept 3 feedback signals from temperature sensors or pressure sensors for process optimization and accordingly control the speed of the pumps. [d] Integral graphical keypad. a) Variable frequency drive (VFD) of power size 30 kW [for chilled water circulation pump] Qty- 03 Set

M & L for 1.1 kV grade copper conductor, 3.5 core, 185 mm², XLPE insulated armoured cable conforming to IS 7098 (Part 1): 1988, having stranded copper compact shaped conductors as per Cl. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/wire and PVC Type ST-2 outer sheath conforming to IS 5831: 1984, including necessary clamping / dressing with cable ties and termination complete all as specified and directed by engineer-in-charge.

Supply, laying / fixing, testing and commissioning of condenser water piping including necessary fittings viz. bends, tees, reducers, flanges, air purge valves, drain valves, structural support, necessary clamps, vibration isolators, etc. including painting and supporting / fixing the pipe in excavated trenches or on floor / wall / ceiling with clamps, hangers, angles, channels (using anchor fastners) with necessary accessories complete all as specified and directed by engineer-in-charge. Make: Tata, Jindal, Surya NOTES:[i] The pipe size 150 mm NB & below shall be MS 'C' class (heavy duty)as per IS 1239 (Part- 1): 2004 & IS 1239 (Part- 2): 2011. [ii] The pipe size above 150 mm NB shall be welded black steel pipe heavy class as per IS 3589: 2001. [iii] Minimum thickness of MS sheet for pipe size above 150 mm NB and up to 350 mm NB shall be 6.35 mm and it shall be 7 mm for pipe size 400 mm NB and above.

(a) 250 mm NB

(b) 200 mm NB

(c) 65 mm NB

Supply, installation, testing and commissioning of 250 mm NB wafer type PN 1.6 rated short pattern CI butterfly valve having Gr. FG-200 CI body conforming to IS 210: 2009, seat having EPDM rubber lining, CF 8 stainless steel disc, AISI- 410 stainless steel stem, 2.4 MPa body test pressure & 1.6 MPa seat test pressure and standard flange end conforming to BS 10 Table D/E & ANSI B 16.1 CI- 125 with necessary accessories complete all as specified and directed by engineer-in-charge. Make: Advance, Sant, Hindustan

Supply, installation, testing and commissioning of precise balancing, double regulation type cast iron balancing valve having FG 200 cast iron body conforming to IS 210: 2009, copper alloy trim, stainless steel 2 Cr. 13 stem, 2.4 MPa body test pressure & 1.6 MPa maximum working pressure and standard flange ends with necessary accessories complete all as specified and directed by engineer-in-charge. Make: Advance, Sant, Hindustan

(a) 250 mm NB

(b) 200 mm NB

Supply, laying / fixing, testing and commissioning of chilled water circulation piping including necessary fittings viz. bends, tees, reducers, flanges, air purge valves, drain valves, structural support, necessary clamps, vibration isolators, etc. including painting and supporting / fixing the pipe in excavated trenches or on floor / wall / ceiling with clamps, hangers, angles, channels (using anchor fastners) with necessary accessories duly insulated with FM approved highly- flexible, closed-cell thermal insulation of elastomeric foam based on synthetic rubber (NBR) of apppropriate thickness laminated with 12 micron aluminium foil facing with reinforced glass scrim tested for service temperature range 0- 105 ˚C as per EN 14706, EN 14707 & EN 14304, thermal conductivity λ ≤ 0.037 W/mK at mean temperature θm = 20 ˚C as per EN 12667 & EN ISO 8497, water vapour diffusion resistance factor μ ≥ 12000 as per EN 12086 & EN 13469, water absorption by volume 0.2% as per ASTM C 1763 & ASTM C 209, Class 0 fire performance as per BS 476 Part 6: 1989, Class 1 surface spread of flame as per BS 476 7: 1997, flammability HB, V-0 as per UL- 94, having good resistance to mechanical impact, excellent resistance to ozone, oil and chemicals, zero ozone depletion potential along with adhesives and other necessary accessories complete all as specified and directed by engineer-in-charge. Make: Tata, Jindal, Surya for pipes & Armacell, K-Flex, Aeroflex for insulation

NOTES: [i] The pipe size 150 mm NB & below shall be MS 'C' class (heavy duty) as per IS 1239 (Part- 1): 2004 & IS 1239 (Part- 2): 2011. [ii] The pipe size above 150 mm NB shall be welded black steel pipe heavy class as per IS 3589: 2001. [iii] Minimum thickness of MS sheet for pipe size above 150 mm NB and up to 350 mm NB shall be 6.35 mm and it shall be 7 mm for pipe size 400 mm NB and above.

(a) 200 mm NB

(b) 150 mm NB

(c) 125 mm NB

(d) 100 mm NB

(e) 80 mm NB

(f) 65 mm NB

(g) 50 mm NB

(h) 40 mm NB

Supply, installation, testing and commissioning of cast steel bolted cover Y-type strainer with CCS body conforming to ASTM A- 216 Gr. WCB, AISI 304 screen with 1.2 mm diameter perforation, 20 kg/cm2 body test pressure & 20 kg/cm2 maximum working pressure and standard flange end conforming to BS 10 Table F / Class-150 duly insulated with FM approved highly- flexible, closed-cell thermal insulation of elastomeric foam based on synthetic rubber (NBR) of apppropriate thickness laminated with 12 micron aluminium foil facing with reinforced glass scrim tested for service temperature range 0- 105 ˚C as per EN 14706, EN 14707 & EN 14304, thermal conductivity λ ≤ 0.037 W/mK at mean temperature θm = 20 ˚C as per EN 12667 & EN ISO 8497, water vapour diffusion resistance factor μ ≥ 12000 as per EN 12086 & EN 13469, water absorption by volume 0.2% as per ASTM C 1763 & ASTM C 209, Class 0 fire performance as per BS 476 Part 6: 1989, Class 1 surface spread of flame as per BS 476 7: 1997, flammability HB, V-0 as per UL- 94, having good resistance to mechanical impact, excellent resistance to ozone, oil and chemicals, zero ozone depletion potential along with adhesives and other necessary accessories complete all as specified and directed by engineer-in-charge. Make: Advance, Sant, Hindustan for strainer & Armacell, K-Flex, Aeroflex for insulation

(a) 150 mm NB

(b) 80 mm NB

(c) 65 mm NB

(d) 50 mm NB

(e) 40 mm NB

Supply, installation, testing and commissioning of wafer type PN 1.6 rated short pattern CI butterfly valve having Gr. FG-200 CI body conforming to IS 210: 2009, seat having EPDM rubber lining, CF 8 stainless steel disc, AISI- 410 stainless steel stem, 2.4 MPa body test pressure & 1.6 MPa seat test pressure and standard flange end conforming to BS 10 Table D/E & ANSI B 16.1 CI- 125 duly insulated with FM approved highly- flexible, closed-cell thermal insulation of elastomeric foam based on synthetic rubber (NBR) of apppropriate thickness laminated with 12 micron aluminium foil facing with reinforced glass scrim tested for service temperature range 0- 105 ˚C as per EN 14706, EN 14707 & EN 14304, thermal conductivity λ ≤ 0.037 W/mK at mean temperature θm = 20 ˚C as per EN 12667 & EN ISO 8497, water vapour diffusion resistance factor μ ≥ 12000 as per EN 12086 & EN 13469, water absorption by volume 0.2% as per ASTM C 1763 & ASTM C 209, Class 0 fire performance as per BS 476 Part 6: 1989, Class 1 surface spread of flame as per BS 476 7: 1997, flammability HB, V-0 as per UL- 94, having good resistance to mechanical impact, excellent resistance to ozone, oil and chemicals, zero ozone depletion potential along with adhesives and other necessary accessories complete all as specified and directed by engineer-in-charge. Make: Advance, Sant, Hindustan for strainer & Armacell, K-Flex, Aeroflex for insulation

(a) 150 mm NB

(b) 80 mm NB

(c) 65 mm NB

(d) 50 mm NB

(e) 40 mm NB

Supply, installation, testing and commissioning of 150 mm NB wafer type PN 1.6 rated swing check type multidoor reflux valve (NRV), designed & tested as per IS 5312 (Part- 2): 1986, suitable to handle clear water having turbidity up to 5000 PPM, having CI body, door and diaphram, leaded tin bronze seat rings and flange drilling standard end connection, etc. duly insulated with FM approved highly- flexible, closed-cell thermal insulation of elastomeric foam based on synthetic rubber (NBR) of apppropriate thickness laminated with 12 micron aluminium foil facing with reinforced glass scrim tested for service temperature range 0- 105 ˚C as per EN 14706, EN 14707 & EN 14304, thermal conductivity λ ≤ 0.037 W/mK at mean temperature θm = 20 ˚C as per EN 12667 & EN ISO 8497, water vapour diffusion resistance factor μ ≥ 12000 as per EN 12086 & EN 13469, water absorption by volume 0.2% as per ASTM C 1763 & ASTM C 209, Class 0 fire performance as per BS 476 Part 6: 1989, Class 1 surface spread of flame as per BS 476 7: 1997, flammability HB, V-0 as per UL- 94, having good resistance to mechanical impact, excellent resistance to ozone, oil and chemicals, zero ozone depletion potential along with adhesives and other necessary accessories complete all as specified and directed by engineer-in-charge. Make: Advance, Sant, Hindustan for strainer & Armacell, K-Flex, Aeroflex for insulation

Supply, installation, testing and commissioning of precise balancing, double regulation type cast iron balancing valve having FG 200 cast iron body conforming to IS 210: 2009, copper alloy trim, stainless steel 2 Cr. 13 stem, 2.4 MPa body test pressure & 1.6 MPa maximum working pressure and standard flange ends duly insulated with FM approved highly- flexible, closed-cell thermal insulation of elastomeric foam based on synthetic rubber (NBR) of apppropriate thickness laminated with 12 micron aluminium foil facing with reinforced glass scrim tested for service temperature range 0- 105 ˚C as per EN 14706, EN 14707 & EN 14304, thermal conductivity λ ≤ 0.037 W/mK at mean temperature θm = 20 ˚C as per EN 12667 & EN ISO 8497, water vapour diffusion resistance factor μ ≥ 12000 as per EN 12086 & EN 13469, water absorption by volume 0.2% as per ASTM C 1763 & ASTM C 209, Class 0 fire performance as per BS 476 Part 6: 1989, Class 1 surface spread of flame as per BS 476 7: 1997, flammability HB, V-0 as per UL- 94, having good resistance to mechanical impact, excellent resistance to ozone, oil and chemicals, zero ozone depletion potential along with adhesives and other necessary accessories complete all as specified and directed by engineer-in-charge. Make: Advance, Sant, Hindustan for valve & Armacell, K-Flex, Aeroflex for insulation

(a) 150 mm NB

(b) 80 mm NB

(c) 65 mm NB

(d) 50 mm NB

(e) 40 mm NB

Supply, installation, testing and commissioning of electronic, self-balancing, pressure independent type dynamic balancing valve rated for minimum 25 bar working pressure with integrated 3-way control valves in a single body and actuator capable of accepting upto 10 V DC and up to 20 mA electric signal and provide similar transduced feedback output to control system duly insulated with FM approved highly- flexible, closed-cell thermal insulation of elastomeric foam based on synthetic rubber (NBR) of apppropriate thickness laminated with 12 micron aluminium foil facing with reinforced glass scrim tested for service temperature range 0- 105 ˚C as per EN 14706, EN 14707 & EN 14304, thermal conductivity λ ≤ 0.037 W/mK at mean temperature θm = 20 ˚C as per EN 12667 & EN ISO 8497, water vapour diffusion resistance factor μ ≥ 12000 as per EN 12086 & EN 13469, water absorption by volume 0.2% as per ASTM C 1763 & ASTM C 209, Class 0 fire performance as per BS 476 Part 6: 1989, Class 1 surface spread of flame as per BS 476 7: 1997, flammability HB, V-0 as per UL- 94, having good resistance to mechanical impact, excellent resistance to ozone, oil and chemicals, zero ozone depletion potential along with adhesives and other necessary accessories complete all as specified and directed by engineer-in-charge. Make: Honeywell, Danfoss, Advance for valve & Armacell, K-Flex, Aeroflex for insulation NOTES: [i] Maximum close off pressure shall not be less than 6 bar for upto 50 mm valves. [ii] Maximum close off pressure shall not be less than 7 bar for 65 mm & above.

(a) 80 mm NB

(b) 65 mm NB

(c) 50 mm NB

(d) 40 mm NB

Supply, laying / fixing, testing and commissioning of MS heavy duty drain piping including necessary fittings viz. bends, tees, reducers, flanges, air purge valves, drain valves, structural support, necessary clamps, vibration isolators, etc. including painting and supporting / fixing the pipe on floor / wall / ceiling with clamps, hangers, angles, channels (using anchor fastners) with necessary accessories complete all as specified and directed by engineer-in-charge. Make: Tata, Jindal, Surya

(a) 40 mm NB

(b) 25 mm NB

S & F of CL 150 # rated ball valve, designed & manufactured as per IS: 9890 (1981) and tested as per BS 6755 Part- I, having floating type three piece design, CS body, SS- 304 ball, PTFE seal/packing/gasket, CS fastners and lever and screwed/socket weld end connection, etc. with accessories complete all as specified and directed.

(a) 40 mm NB

(b) 25 mm NB

Supply, installation, testing and commissioning of automatic air-vent valve with 20 mm end connections, brass OT 58 body and cover, polyacetal lever, high density expanded polyethylene float, EPDM rubber plug, stainless steel spring, polyamide cap etc. suitable for maximum operating pressure of 16 bar and maximum operating temperature 115 °C respectively, installed on all high points in the water piping system to automatically remove the trapped air complete all as specified and directed.

S & F of 6" dual scale (°F/°C), lower mount (radial), bimetal thernometer having 0.5 NPT process connection, Grade A accuracy class as per ASME B40.200, stem diameter 6.35 mm, laminated safety glass window, stainless steel 304 case, steam, process connection & joint, aluminium dial & pointer, IP67 protection, scale range 0- 60 °C complete with accessories, etc. as specified and directed by engineer-in-charge.

S & F of 4" bourdon tube pressure gauge conforming to EN 837-1, having copper alloy process connection & pressure element, plastic black pointer & case, plastic crystal-clear window, snap-fitted in case, accuracy class 2.5, scale range 0- 25 bar complete with accessories, etc. as specified and directed by engineer-in-charge.

Supply, installation, testing and commissioning of double-skin type horizontal, floor-mounted, top / side discharge air handling unit having thermal break profile complete with air-tight casing using gaskets and self-adhesive tapes and 0.8 mm thick pre-coated outer skin and 0.6 mm thick GI inner skin, 45±2 mm thick double skin panel with pressure injected CFC & HCFC free PUF having 'k' value of 0.02 W/°C/m & density 40 kg/m³, AMCA certified energy efficient plug fans with backward curved impellers for high static pressure mounted on aluminium extruded siderail base frame with VFD, EU4 pre-filter and EU7 fine filter (shall be mounted on a common frame), combination of 6/8 rows deep chilled water coils with anti-corrosion aluminium fins, suitable high efficiency (IE3) TEFC squirrel cage induction motor, electric step heater, PVC/nylon hinges & handles, view port and marine lamp, limit switch, SS-304 drain pan, vibration isolators/rubber pads (minimum 1" thick) inspection windows / doors, mixing box and supply / return / fresh air openings fitted with aluminium volume control dampers complete all as specified and directed by the engineer-in-charge. Make: Trane, Carrier, Daikin The AHU shall comprise of the following: [a] Suitable SISW backward curved plug fan, dynamically balanced, with AMCA certified blower [b] 4 Pole, TEFC, high efficiency (IE3), squirrel cage induction motor, conforming to IS 12615: 2018, having BHP rating 20% higher than the peak capacity with VFD suitable for 415 V±10%, 50 Hz, 3-Phase AC power supply

a) 8750 CFM; 2" WG static pressure

b) 12250 CFM; 2" WG static pressure

c) 14000 CFM; 2" WG static pressure

d) 15750 CFM; 2" WG static pressure

e) 20000 CFM; 2" WG static pressure

f) 22000 CFM; 2" WG static pressure

Supply, installation, testing and commissioning of double-skin type horizontal, ceiling suspended, side discharge air handling unit 8750 CFM; 3" WG static pressure having thermal break profile complete with air-tight casing using gaskets and self-adhesive tapes and 0.8 mm thick pre-coated outer skin and 0.6 mm thick GI inner skin, 45±2 mm thick double skin panel with pressure injected CFC & HCFC free PUF having 'k' value of 0.02 W/°C/m & density 40 kg/m³, AMCA certified energy efficient plug fans with backward curved impellers for high static pressure mounted on aluminium extruded siderail base frame with VFD, EU4 pre-filter and EU7 fine filter (shall be mounted on a common frame) & HEPA filter H13 after fan section, combination of 6/8 rows deep chilled water coils with anti-corrosion aluminium fins, suitable electric heater banks, suitable high efficiency (IE3) TEFC squirrel cage induction motor, electric step heater, PVC/nylon hinges & handles, view port and marine lamp, limit switch, SS-304 drain pan, vibration isolators/rubber pads (minimum 1" thick) inspection windows / doors, mixing box and supply / return / fresh air openings fitted with aluminium volume control dampers complete all as specified and directed by the engineer-in-charge. Make: Trane, Carrier, Daikin

The AHU shall comprise of the following: [a] Suitable SISW backward curved plug fan, dynamically balanced, with AMCA certified blower [b] 4 Pole, TEFC, high efficiency (IE3), squirrel cage induction motor, conforming to IS 12615: 2018, having BHP rating 20% higher than the peak capacity with VFD suitable for 415 V±10%, 50 Hz, 3-Phase AC power supply [c] Flexible connetion made with airtight ASTM E84 (Class I) polyester fire retardant cloth riveted on periphery of cloth with extruded aluminium 'L' angle flange as per fan size at discharge duct/plenum [d] Washable type of 'EU4' filter (pre-filter, efficiency 90% down to 10 micron) and 'EU7' filters (Micro Vee filters, efficiency 99% down to 3 micron) [e] 6 / 8 rows deep chilled water cooling coil section with 0.15 mm thick copper fins and 0.36 mm diameter copper tubes tested on 21 kg/cm², with SS sandwiched drain tray, etc. (a 350 mm service section between eliminator and heater is required) [f] HEPA filter section H13 filter with 99.97% down to 0.3 micron [g] Condensate drain pan fabricated from 18 gauge SS 304, powder coated and insulated with elastomeric insulation of suitable thickness

Supply, installation, testing and commissioning of fire damper of guage 18SWG (1.2mm thick), at least of 120 minutes fire-rating, spring activated on melting of fusible link having melting point 67.13° C complete with smoke detector / thermister, fusible link etc. and actuator as required for operation, located in the SA / RA ducts, at all fire rated crossoevers (shafts, walls, etc.). along with control panel (located in such a way that the reset can easily be done), interlocked with the building management system for the fire detection or HVAC to trip / close in the event of fire/smoke in the respective zone and tested as per ULL- 555 and certified by CBRI complete all as specified and directed by engineer-in-charge. Make: Ruskin Titus, Trox, Rola Star, Zeco The fire dampers shall meet the following criteria: [a] Bare fire dampers with 400 mm sleeve [b] Control panel actuator, including electrical spring type actuator, remote indication of the fire damper position. [c] Interconnection wire for the fire detection & alarm system with the AHU and the smoke dampers [d] Sealing any openings around the sleeve of the fire dampers with approved fire sealant as per the specification & recommandations of the manufacturer.

i) Motorized, spring return type, combination fire and smoke damper

ii) Control panel actuator, including electrical spring type actuator, remote indication of the fire damper position.

Supply, installation, balancing and commissioning of factory fabricated galvanized steel sheet metal (G.S.S.) round / rectangular ducting of following sheet thickness having zinc coating of 160 g/m² total on both sides and complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, volume control dampers, hangers, supports, etc. as per approved drawings and conforming to the latest edition of IS 655: 2006 & HVAC Duct Construction Standards - Metal and Flexible of SMACNA along with required scaffolding work to install the ducts at site complete all as specified and directed by engineer-in-charge. Make: Ruskin Titus, Trox, Rola Star

i) 26 G (MS angle flanges)

ii) 24 G (MS angle flanges)

iii) 22 G (MS angle flanges)

iv) 20 G (MS angle flanges)

v) 18 G (MS angle flanges)

S & F of supply / return / exhaust air diffusers / grills / louvers (factory made with gauge not less than 18SWG (1.2mm thick)) of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core complete all as specified and directed by engineer-in-charge. Make: Ruskin Titus, Zeco, Rola Star

S & F of FM approved highly- flexible, closed-cell thermal insulation of elastomeric foam based on synthetic rubber (NBR), laminated with 12 micron aluminium foil facing with reinforced glass scrim tested for service temperature range 0- 105 ˚C as per EN 14706, EN 14707 & EN 14304, thermal conductivity λ ≤ 0.037 W/mK at mean temperature θm = 20 ˚C as per EN 12667 & EN ISO 8497, water vapour diffusion resistance factor μ ≥ 12000 as per EN 12086 & EN 13469, water absorption by volume 0.2% as per ASTM C 1763 & ASTM C 209, Class 0 fire performance as per BS 476 Part 6: 1989, Class 1 surface spread of flame as per BS 476 7: 1997, flammability HB, V-0 as per UL- 94, having good resistance to mechanical impact, excellent resistance to ozone, oil and chemicals, zero ozone depletion potential along with adhesives and other necessary accessories complete all as specified and directed by engineer-in-charge. Make: Armacell, K-Flex, Aeroflex

i) 19 mm thick thermal insulation

ii) 13 mm thick thermal insulation

S & F of FM approved fibre-free, super-silent, microbe resistant, easy to apply 10 mm thick acoustic duct lining insulation of open cell elastomeric foam based on synthetic rubber tested for acoustic performance as per EN ISO 354, EN ISO 11654: 1997 & ASTM C 423, service temperature range -20- 85 ˚C as per EN 14706 & EN 14304, thermal conductivity λ ≤ 0.047 W/mK at mean temperature θm = 20 ˚C as per EN 12667, Class 1 surface spread of flame as per BS 476 7: 1997, flammability HB, V-0 as per UL- 94, anti-microbial behaviour (no fungal growth visible with the naked eye & no bacterial growth) as per EN ISO 846, air erosion resistance (no erosion, cracking or delamination at air velocity of 10000 FPM) as per ASTM C 1071- 05, density 140- 180 kg/m3 along with adhesives and other necessary accessories complete all as specified and directed by engineer-in-charge.

FIRE PROTECTION SYSTEM

Supply, installation, testing and commissioning of FM approved and UL listed microprocessor- based 10 loop, true peer-to-peer networkable, addressable Fire Alarm Control Panel (FCAP) with its own microcontroller memory, communication module, fire device loop interface cards for intelligent initiating and indicating devices and peer-to-peer networkable with other addressable fire alarm panels. conforming to UL 2572 mass notification systems & NFPA 72, complete with accessories all as specified and directed by engineer-in-charge. The FACP shall meet the following specifications / functional requirements. [i] The FACP shall have one to ten isolated intelligent Signalling Line Circuits (SLCs) capable of connecting up to 159 detectors and 159 modules per SLC or 318 devices per loop. [ii] The FACP shall have a degrade mode and the loops shall work in degrade mode in case of the CPU failure.

[iii] The FACP shall have 6 line 640 character LCD backlit display, full QWETRY program keypad, LED indicators viz. power; fire alarm; supervisory; system trouble; other event; signals silenced; point disabled; CPU failure; controls active; etc. membrane switch controls viz. acknowledge; signal silence; drill; system reset; lamp test; etc [iv] The FACP shall have four access levels, flash EPROM, 240 VAC power supply, automatic battery charger, 24 V sealed lead acid batteries, sufficient for 24 hrs normal working and 30 min in alarm condition.

[v] The FACP shall have manual sensitivity adjustment up to nine levels, built-in alarm; trouble; security and supervisory relays, history file with 4000-event capacity in nonvolatile memory plus separate 1000-event alarm-only file, keypad operation, LCD unit to indicate fire / fault signal of individual unit, in built printer to log all incoming data, etc. [vi] The FACP shall have integrated 8 channel digital voice evacuation system controller capable of broadcasting evacuation messages on the same peer-to-peer network, fire fighter's telephone two-way communication system capable of supervising all the speaker circuits with adequate zone control and accessories etc. Make: ONYX- Notifier, XLS-3000- Honeywell, IFC-JC

Supply, installation, testing and commissioning of FM approved and UL listed Network Control Display (NCD) capable of full supervision of all inputs and network integrity, having high definition 10" 1024 X 600 colour touchscreen display, environmental adjustment controls to maximize LCD legibility, LED status indicators (for power supply and off normal condition), network connection, three USB connections, trouble relay, tamper and trouble inputs, etc. and features viz. network-wide acknowledge silence, reset, lamp test, fully programmable node-mapping subsystem, colour coded icon based event notification, event vectoring, etc. along with UL listed non-resettable 24 VDC power source complete all as specified and directed by engineer-in-charge. Make: ONYX- Notifier, XLS-3000- Honeywell, IFC-JC

Supply, installation, testing and commissioning of FM approved and UL listed intelligent plug-in photoelectric smoke detector, conforming to UL 268 7th Edition, sealed against back pressure, with sensitivity range 0.5 % to 4.0 % per foot obscuration, two-wire SLC connection, fixed-temperature setpoint 135°F (57°C), built-in functional test switch activated by external magnet, built-in tamper resistant feature, remote test feature from the panel, dual LED design provideing 360° viewing angle, visible bi-color LEDs blink green every time the detector is addressed, and illuminate steady red on alarm, compatible with FlashScan® and CLIP protocol systems, Rotary, decimal addressing, etc. and having the ability to combine temperature thermal sensing with optical sensing, complete with all accessories viz. base, base box, etc. to be installed below / above false ceiling, roof and concealed space, etc. complete as specified and directed by engineer-in-charge. Make: ONYX- Notifier, XLS-3000- Honeywell, IFC-JC

Supply, installation, testing and commissioning of FM approved and UL listed intelligent plug-in intelligent thermal detector, two-wire SLC connection, fixed-temperature setpoint 135 °F (57 °C), rate of temperature rise 15 °F (8.3 °C) per minute, built-in functional test switch activated by external magnet, built-in tamper resistant feature, remote test feature from the panel, dual LED design provideing 360° viewing angle, visible bi-color LEDs blink green every time the detector is addressed, and illuminate steady red on alarm, compatible with FlashScan® and CLIP protocol systems, rotary & decimal addressing, etc. complete with all accessories viz. base, base box, etc. to be installed below / above false ceiling, roof and concealed space, etc. complete as specified and directed. Make: ONYX- Notifier, XLS-3000- Honeywell, IFC-JC

Supply, installation, testing and commissioning of FM approved and UL listed dual- action, surface / semi- flush mounted break-glass type addressable manual call point (MCP) including an addressable interface for the intelligent FACP having built-in bicolour LED which is visible through the handle of the MCP, flashing in normal operation and latching steady red in alarm condition, captive screw terminals wire-ready for easy connection to SLC loop complete with accessories as specified and directed by engineer-in-charge. Make: ONYX- Notifier, XLS-3000- Honeywell, IFC-JC

Supply, installation, testing and commissioning of FM approved & UL listed of Horn Strobe, wired as a primary notification appliance, flashing 75 cd at 1 Hz over the strobe's entire operating voltage range, xenon flash tube and associated lens / reflector system, buil-in synchronization feature keeping strobes in sync for up to 30 minutes, horn producing audible annunciation of 75 dBA at 3 m distance complete with accessories as specified and directed by engineer-in-charge. Make: ONYX- Notifier, XLS-3000- Honeywell, IFC-JC

Supply, installation, testing and commissioning of FM approved and UL listed addressable control module to provide FACP a circuit for notification appliances (e.g. Horns, Strobes, Horn Strobes, etc.) having built-in type identification, integral LED indicators, high noise immunity, SMES screws with clamping plates for wiring ease, direct-dial entry of address, etc. complete with accessories as specified and directed by engineer-in-charge. Make: ONYX- Notifier, XLS-3000- Honeywell, IFC-JC

Supply, installation, testing and commissioning of FM approved and UL listed addressable relay module to provide FACP a dry-contact output for activating a variety of auxiliary devices, viz. fans, dampers, control equipment, etc. having built-in type identification, integral LED indicators, high noise immunity, SMES screws with clamping plates for wiring ease, direct-dial entry of address, etc. complete with accessories as specified and directed by engineer-in-charge. Make: ONYX- Notifier, XLS-3000- Honeywell, IFC-JC

Supply, installation, testing and commissioning of FM approved and UL listed intelligent monitor module, with built-in type identification automatically identifying the device as a monitor module to the FCAP, to supervise a circuit of dry-contact input devices, viz. flow switch of sprinkler line, powered directly by two-wire SLC loop, high noise immunity, SEMS screws with clamping plates for ease of wiring, direct-dial entry of addresses, LED indicators, etc. complete with accessories as specified and directed by engineer-in-charge. Make: ONYX- Notifier, XLS-3000- Honeywell, IFC-JC

M & L for low smoke zero helogen (LS0H) flame retardant fire alarm cable, conforming to BS 7629-1, BS 6387 & BS EN 50200 and rated for 500 V, having plain annealed stranded copper conductor with primary insulation of glass mica fire resistant tape and secondary insulation of high performance silicone rubber, earth/drain wire of annealed tinned copper, electrostatic screen of aluminium fire barrier and type LTS3 outer sheath conforming to BS 7655, suitable for operating temperature range -30 ˚C to +70 ˚C and minimum bending radius being 6 times the overall cable diameter, RED in colour, including laying, termination and ferruling complete all as specified and directed by engineer-in-charge. Make: RR Kabel, Havells or Polycab

a) 2 core, 1.5 mm²

b) 2 core, 2.5 mm²

Supply, installation, testing and commissioning of electric driven Main Fire Pump to deliver 2280 LPM flowrate at 70 MWC head and suitable for automatic operation and consisting of following, complete with accessories as specified and directed by engineer-in-charge. [i] Horizontal type,single-stage, single suction, horizontal shaft type, end suction, volute type with top centreline discharge centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal, etc. conforming to IS 12469: 2019, suitable to deliver 2280 LPM flowrate at 70 MWC head. [ii] Suitable HP squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on 3- Ph, 415 V, 50 Hz AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class 'F' insulation, conforming to IS 12615: 2018.

Supply, installation, testing and commissioning of diesel engine driven main fire pump to deliver 2280 LPM flowrate at 70 MWC head and suitable for automatic operation and consisting of following, complete with accessories as specified and directed by engineer-in-charge. [i] Horizontal type,single-stage, single suction, horizontal shaft type, end suction, volute type with top centreline discharge centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal, etc. conforming to IS 12469: 2019, suitable to deliver 2280 LPM flowrate at 70 MWC head. [ii] Suitable HP, 1800 RPM diesel engine, water cooled with radiator, conforming to IS 10002: 1981, complete with auto starting mechanism, 12/24 V electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour, etc. as required.

Supply, installation, testing and commissioning of electric driven Jockey Pump to deliver 180 LPM flowrate at 70 MWC head and suitable for automatic operation and consisting of following, complete with accessories as specified and directed by engineer-in-charge. [i] Horizontal type, centrifugal, split-casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal, etc. conforming to IS 12469: 2019, suitable to deliver 180 LPM flowrate at 70 MWC head. [ii] Suitable HP squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on 3- Ph, 415 V, 50 Hz AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class 'F' insulation, conforming to IS 12615: 2018.

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor, cubical compartmental type "Motor Control Center" (MCC) of suitable size, conforming to IEC 61641, having both sides openable with hinged double doors & locking arrangement and IP 54 protection made out of 2.00 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labeling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel sheet, vitreous enameled (white) with letters figures and conventional skull and bones in signal red colour, suitable for 3- Phase 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length & size, including fixing lugs, bolts, screws etc. complete all as specified and directed. Make: Schneider, Siemens, L & T, ABB

The MCC shall comprise of the following: [A] BUSBAR CHAMBER [i] 01 Set (3L + N) of copper busbar of rated capacity 500 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [ii] Automatic Transfer Switch with complete protection of capacity 630 Amps four pole covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [B] INCOMING [i] 250 A, 415 V, Ics = 100% Icu = 36 kA, 50 Hz, FP MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7-1 X In), adjustable short-circuit setting (5-10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs- 01 Nos. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 04 Nos. [iii] LED phase indicators (Red, Yellow, Blue)- 01 Set

M & L for low smoke zero helogen (LS0H) fire survival control cable with circuit integrity, conforming to BS 7846 and rated for 600 V, having plain annealed stranded copper conductor with fire-resistant mica tapes covered by an extruded layer of cross-linked polyethylene, extruded layer of thermoplastic low smoke zero helogen (LS0H) compound, single layr of galvanized steel wires and thermoplastic LS0H compound sheath, suitable for operating temperature range -40 ˚C to +90 ˚C and minimum bending radius being 12 times the overall cable diameter, including laying, clamping, termination and ferruling complete all as specified and directed by engineer-in-charge. Make: Havells, Polycab, Finolex, RR Kabel

a) 2 core, 2.5 mm² (for instrumentation)

b) 3 core, 2.5 mm² (for auto start/stop panel)

c) 12 core, 2.5 mm² (for diesel engine pump)

M & L for ISI marked MS ERW pipes conforming to IS: 1239 (Part 1 & 2) with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer, including supporting/fixing the pipe on floor/wall/ceiling with clamps, hangers, angles, channels (using anchor fastners) with painting of one coat primer and 2 or more coats of synthetic enamel paint complete all as specified and directed. NOTES: [i] Standard MS fittings with welded joint shall be used on the pipes. [ii] All hangers, clamps, brackets etc. shall be of galvenized iron. [iii] Welding of any kind on the galvenised support / hanger shall not be permitted. [iv] The pipe size 150 mm NB & below shall be MS 'C' class (heavy duty)as per IS 1239 (Part- 1): 2004 & IS 1239 (Part- 2): 2011. [v] The pipe size above 150 mm NB shall be welded black steel pipe heavy class as per IS 3589: 2001. [vI] Pipes of size more than 50 mm NB shall be butt welded with fittings of equal or higher thickness whereas pipes below 50 mm NB size shall be socket welded. Make: Tata, Jindal, BST

A) 200 mm NB

(B) 150 mm NB

(C)100 mm NB

(D) 80 mm NB

(E) 65 mm NB

(F) 50 mm NB

(G) 40 mm NB

(H) 32 mm NB

(I) 25 mm NB

M & L for 200 mm NB PN 1.6 rated polypropelene vortex inhibitor suction lift, conforming to BS 4504 with stainless wire mesh, bolts, nuts and washers, etc. complete all as specified and directed by engineer-in-charge. Make: Associated Enterprises, Enduramaxx, Balmoral Tanks

Supply, installation, testing and commissioning of PN 1.6 rated CI swing check type reflux (non return) valve, conforming to IS: 5312 (Part 1)- 2004 with flange drilling standard end connection conforming to IS: 1538- 1993 and necessary accessories all complete as specified and directed. Make: Leader, Sant, Venus

A) 100 mm NB

B) 40 mm NB

M & L for ISI marked MS ERW pipes conforming to IS: 1239 (Part 1 & 2) with all accessories like all fittings including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer, including supporting/fixing the pipe in excavated trenches with painting of one coat primer and 2 or more coats of synthetic enamel paint of and wrapping of 4 mm thick protection coating by thermo fusion process complete all as specified and directed. NOTES: [i] Standard MS fittings with welded joint shall be used on the pipes. [ii] All hangers, clamps, brackets etc. shall be of galvenized iron. [iii] Welding of any kind on the galvenised support / hanger shall not be permitted. [iv] The pipe size 150 mm NB & below shall be MS 'C' class (heavy duty) as per IS 1239 (Part- 1): 2004 & IS 1239 (Part- 2): 2011. [v] The pipe size above 150 mm NB shall be welded black steel pipe heavy class as per IS 3589: 2001. [v] Pipes of size more than 50 mm NB shall be butt welded with fittings of equal or higher thickness whereas pipes below 50 mm NB size shall be socket welded. Make: Tata, Jindal, BST

A) 150 mm NB

B) 100 mm NB

C) 40 mm NB

S & F gunmetal fire hydrant single landing valve with 80 mm NB flanged inlet, brass spindle controlled 63 mm NB female instantaneous outlet type gunmetal coupling, blank cap, chain, twist release type lug & all accessories conforming to IS:5290- 1993 including fixing and flanged tapping from stand post type fire hydrant complete all as specified and directed. Make: Newage, AAAG, Minimax

S & F of orifice plate made out of 6 mm thick SS 304 with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete all as specified and directed by engineer-in-charge. Make: Newage, AAAG, Minimax

S & F non-percolating rubber reinforced lined RRL hose type- A 15 m long fire hose of 63 mm NB size, conforming to IS 636: 1988, rated for bursting pressure of 35.7 kg/cm² complete with gunmetal male & female coupling conforming to IS: 903- 1993, bound and rivetted to the hose pipe with copper rivets and 1.5 mm² copper wire complete as specified and directed. Make: Newage, AAAG, Minimax

S & F branch pipe, conforming to IS 903: 1993, having 63 mm NB instantaneous gunmetal inlet, made threaded outlet, 15 mm NB long nozzle, suitable for inter connection to hose pipe coupling complete all as specified and directed. Make: Newage, AAAG, Minimax

S & F swinging type 36 m long First Aid Hose Reel, conforming to IS:884-1969, having 19 mm NB thermoplastic reinforced hose reel tubing, conforming to IS: 12585- 1988, 25 mm NB ball valve, stop cock, terminating with gunmetal coupling & nozzle of 6 mm NB outlet with shut-off valve, conforming to IS: 8090- 1976 complete with MS socket for tap-off, red colour drum, brackets (including painting) for fixing on wall with anchor fastner, bolts, nuts, etc. complete all as specified and directed. Make: Newage, AAAG, Minimax

Supply, installation, testing and commissioning of 4- way fire brigade inlet connection, conforming to IS: 5290- 1993, with four 63 mm NB inbuilt gunmetal non-return valves, four 63 mm NB instanteneous couplings arranged on 150 mm NB pipe manifold and connected to fire hydrant ring main and fire hydrant wet riser pipe all complete as specified and directed. Make: Newage, AAAG, Minimax

Supply, installation, testing and commissioning of 2- way fire brigade draw- off connection with two 63 mm NB inbuilt gunmetal non-return valves instanteneous coupling type arranged on 100 mm NB pipe manifold and connected to wet riser main as well as to fire water tank including CI butterfly valve, CI non-return valve and MS cabinet with mounting supports, etc. all complete as specified and directed. Make: Newage, AAAG, Minimax

M & L for installation 100mm NB control valve of cast iron body, brass / bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc. all complete as specified and directed by engineer-in-charge.

Supply and fix 100mm NB PN 1.6 rated CI sluice valve conforming to IS: 14846- 2000 with SS spindle conforming to IS: 6603- 2001 and flange drilling standard end connection conforming to IS: 1538-1993 and necessary accessories all complete as specified and directed. Make: Leader, Sant, Venus

Supply, installation, testing and commissioning of 80mm NB PN 1.6 rated, hand lever operated CI butterfly valve, conforming to IS: 13095- 1991, with flange drilling standard end connection conforming to IS: 1538- 1993 and necessary accessories all complete as specified and directed. Make: Leader, Sant, Venus

M & L for FM approved and UL listed standard response, standard coverage glass-bulb type spray sprinklers, conforming to IS 15105: 2002, and having discharge coefficient K = 8.0, maximum working pressure 175 psi (12.1 bar), bronze frame, brass/copper button, bronze compression screw, copper defletor, TEFLON sealing assembly, etc. with 15 mm NB screwed emd connection, suitable for 68° C temperature rating complete all as specified and directed by engineer-in-charge. Make: Tyco, HD, Viking

A) Pendent Sprinkler

B) Recessed Pendent Sprinkler

S & F of FM approved and UL listed sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread having 175 psi maximum working pressure with branch line (inlet) 25 mm NPT make to sprinkler head (outlet) 15 mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar, etc. 700 mm to 1800 mm in length complete all as specified and directed by engineer-in-charge. Make: Easyflex, Apollo, Safex

M & L for Construction of brick masonary valve chamber of size 1000 mm X 800 mm X 1000 mm (internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate, 150 mm thick & 150 mm wide offsets around over 100 mm thick hardcore , 200 mm thick fly-ash brick masonry walls built in CM 1:6, 100 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/Dense soil 6 mm thick MS sheet cover fixed on 25 mm X 25 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coaping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

MECHANICAL LAUNDRY

Supply, installation, testing and commissioning of fully programmable, microprocessor controlled, electric heated, front loading, high spin, soft mount, suspended automatic washer extractor of 45 kg capacity & volume not less than 425 litre, drum diameter not less than 1000 mm & drum depth not less than 500 mm, consisting of heavy duty cast bearing housing, SS 304 cabinet, SS 304 bush shaft, heavy duty drive motor fitted with safety devices & capable of handling variable frequencies, heavy duty variable frequency drive, fully programmable PLC with up to 30 preset or customised programs, top spring suspension with hydraulic cushions at bottom, etc. with water consumption less than 550 litre/cycle and steam consumption 50 kg/hr, loading ratio 1:10, door opening not less than 550 mm and overall dimensions not more than 2000 mm X 2000 mm X 2000 mm (L X W X H) complete all as specified and directed by engineer-in-charge. Make: Wonderclean, Ramsons

Supply, installation, testing and commissioning of automatic, electric heated, glass wool insulated, epoxy painted and PLC controlled drying tumbeler of 60 kg capacity & volume not less than 1200 litre with auto cool down, drum diameter not less than 1250 mm & drum depth not less than 1250 mm, consisting of heavy duty die cast aluminum blower, heavy duty two belt drive motor, fitted with safety devices, heacy duty stainless steel heat exchanger with aluminium fins, etc. with steam consumption less than 65 kg/hr, electric heating 36- 48 kW, loading ratio 1:20, door opening not less than 950 mm and overall dimensions not more than 1500 mm X 2000 mm X 2500 mm (W X D X H) complete all as specified and directed by engineer-in-charge. Make: Wonderclean, Ramsons

Supply, installation, testing and commissioning of fully automatic portable electric steam generator of capable of handling all laundry & garment loads to deliver continuous dry steam supply of 10 kg/hr at 4 kg/cm2 pressure to two electric irons & one steam type iron, having heater capacity of 6 kW, water softener plant 15 litre/he to treat water with maximum hardness upto 100 ppm, boilers having two levels of electronic safety and fitted with one mechanical safety valve complete with all safety devices, built-in control panel and motor as specified and directed by engineer-in-charge. Make: Wonderclean, Ramsons

Supply, installation, testing and commissioning of flat base vacuum ironing table with table top size 1300 mm X 800 mm having powerful suction, peddle operated & fitted with heavy duty aluminium blower and motor complete with electric & steam press and built-in control panel as specified and directed by engineer-in-charge. Make: Wonderclean, Ramsons

S & F of durable and high quality dry linen trolley of size 900 mm X 600 mm X 900 mm and capacity upto 50 kg having stainless steel square pipes and rods fabricated in stainless steel, base made of stainless steel, having welded structure and fitted with heavy duty castors complete all as specified and directed by engineer-in-charge. Make: Wonderclean, Ramsons

S & F of durable and high quality wet linen trolley of size 900 mm X 600 mm X 900 mm and capacity upto 70 kg fabricated in stainless steel, watertight with drain attachment at the bottom sheet and fitted with heavy duty castors complete all as specified and directed by engineer-in-charge. Make: Wonderclean, Ramsons

EXHAUST FAN

S & F energy efficient metalic exhaust fan having blade sweep 300 mm, air delivery not less than 1800 CMH, suitable for 220-240 V, 50 Hz, 1-Ph AC supply, including electrical connection with 3 core flexible Cu conductor cable of appropriate size to the exhaust fan complete all as specified and directed by engineer-in-charge. Make: Crompton, Usha, Bajaj

NURSE CALLING

Supply and fix XM Quod 81 Android media Player

Supply and install HTM 6005 Ceiling Pull Cord with must be accompanied by either a HTM. 6001 or HTM 6003 to reset the call activated by the ceiling pull cord. To be used when activation of an alarm is needed where there are no walls within practical reaching distance. To mount the unit for example by a bath in a semi assisted bathroom. Power requirements 2 x AAA alkaline batteries. Dimensions W x D x H : 85 x 85 x 50mm

Supply and install HTM 4100 Display- Nurse Station- 15 inch colour backlit screen, Option of numeric or alpanumeric display. Optional functions, Location map, Sounder, User-editable information, Call accept, Zoning, Function buttons, Call logging, Note: Required if e- logging to be installed. Power requirements non-switched socket outlet 240 V A.C Dimensions W x D x H : 3905 x 90 x 3300mm ( H 480 with aerial)

Supply and install HTM 6032 - Over-door light (requires power supply, lamp up to 15 lights, 5 amp supply for up to 40 lights).

Supply and install HTM 4031 RTX (Repeater / Signal Booster)- Used within the building normally on the 1st Floor to build a radio foot print to the desired parameters of the system. This then enables receivers and transmitters to be installed anywhere within the parameters. Power requirements non-switched socket outet 240 V A.C Dimensions W x D x H : 180 x 125 x 40mm (H 290 with aerial)

Supply and installed HTM 6500S - For Bed side/ Wash Room/ Toilet - Call Point, Four buttons, two sockets + pullcord or pear push + wall bracket included. The HTM 6500S is fitted with two sockets for connecting accessories such as pressure mats, epilepsy detectors, PIR triggers and much more. This model has an automatic monitor function for situations such as bed occupancy monitoring. Power requirements 2 x AA alkaline batteries. Dimensions W x D x H : 170 x 32 x 96

DG SET

Supply, installation, testing and commissioning of silent DG Set, conforming to IS: 10002- 1981, complete with Diesel Engine of suitable BHP & AC Brushless SPDP alternator, conforming to IS: 13364- 1992, mounted on a common base frame & coupled through a flexible coupling or close coupled complete with platform, control panel having meters, sound-proof canopy, etc. of 625 kVA capacity conforming to the following specifications complete all as specified and directed. Make: Kirloskar, Crompton Greves, Cummins [a] Engine: 12 cylinder, in-line, 4 stroke, radiator cooled engine, well designed air handling system with dry type, heavy duty, replaceable paper element air cleaner with restriction indicator, air to air aftercooling, optimised turbocharger for increased altitude,Inline fuel pump with class H electronic governing, spin on fuel filter, standard integral set-mounted radiator system, designed and tested for 50°C ambient temperature, full flow spin on lube oil filter, electrical starter motor with soft start engagement feature, ƒƒbattery charging alternator with 1 x 24 or 2 X 12 V DC dry type battery. [b] Alternator: ƒƒBrushless type, screen protected, revolving field, self-excited alternator, conforming to IS/IEC 60034-1 3-phase reconnectable winding with 12 terminals brought out for connection, dedicated winding specially designed for single operation, impregnation on all wound components for better mechanical strength

[c] Control Panel: Manufactured with 14/16 gauge CRCA sheet and powder coated for weather-proof and long lasting finish. The control panel consists of the following parts: [i] Controller: Aluminum bus bars with suitable capacity with incoming/outgoing terminals [ii] Indicating lamps for ‘Load ON’ and ‘Set Running’ [iii] Instrument fuses duly wired and ferruled [iv] MCCB of suitable rating with overload and short circuit protections [d] Microprocessor based generator set monitoring and control system including an intuitive operator interface that allows for complete generator set control as well as system metering, fault annunciation, configuration and diagnostics, LED backlit LCD display with tactile feel soft-switches & generator set status LED lamps, remote START-STOP [e] Power Factor Meter. [v] kWh meter i/c CT's of 1000/ 5A rating, 15 V A burden. [vi] Pilot lamp for ON & OFF for "Set ON", Load ON", MCCB Trip (LEDs) for Mains and Alternator. [vii] Suitable knockout for receving UG cables. [viii] Audio Visual annunciation & tripping for LLOP, HWT and over speed. The hooter used for alarm purpose shall work on 24 V DC supply and shall be of heavy duty type.

Supply, installation, testing and commissioning of silent DG Set, conforming to IS: 10002- 1981, complete with Diesel Engine of suitable BHP & AC Brushless SPDP alternator, conforming to IS: 13364- 1992, mounted on a common base frame & coupled through a flexible coupling or close coupled complete with platform, control panel having meters, sound-proof canopy, etc. of 500 kVA capacity conforming to the following specifications complete all as specified and directed. Make: Kirloskar, Crompton Greves, Cummins [a] Engine: 12 cylinder, in-line, 4 stroke, radiator cooled engine, well designed air handling system with dry type, heavy duty, replaceable paper element air cleaner with restriction indicator, air to air aftercooling, optimised turbocharger for increased altitude,Inline fuel pump with class H electronic governing, spin on fuel filter, standard integral set-mounted radiator system, designed and tested for 50°C ambient temperature, full flow spin on lube oil filter, electrical starter motor with soft start engagement feature, ƒƒbattery charging alternator with 1 x 24 or 2 X 12 V DC dry type battery. [b] Alternator: ƒƒBrushless type, screen protected, revolving field, self-excited alternator, conforming to IS/IEC 60034-1 3-phase reconnectable winding with 12 terminals brought out for connection, dedicated winding specially designed for single operation, impregnation on all wound components for better mechanical strength

[c] Control Panel: Manufactured with 14/16 gauge CRCA sheet and powder coated for weather-proof and long lasting finish. The control panel consists of the following parts: [i] Controller: Aluminum bus bars with suitable capacity with incoming/outgoing terminals [ii] Indicating lamps for ‘Load ON’ and ‘Set Running’ [iii] Instrument fuses duly wired and ferruled [iv] MCCB of suitable rating with overload and short circuit protections [d] Microprocessor based generator set monitoring and control system including an intuitive operator interface that allows for complete generator set control as well as system metering, fault annunciation, configuration and diagnostics, LED backlit LCD display with tactile feel soft-switches & generator set status LED lamps, remote START-STOP [e] Power Factor Meter. [v] kWh meter i/c CT's of 800/ 5A rating, 15 V A burden. [vi] Pilot lamp for ON & OFF for "Set ON", Load ON", MCCB Trip (LEDs) for Mains and Alternator. [vii] Suitable knockout for receving UG cables. [viii] Audio Visual annunciation & tripping for LLOP, HWT and over speed. The hooter used for alarm purpose shall work on 24 V DC supply and shall be of heavy duty type.

AIR CURTAIN

Supply, install, commissioning and testing of commercial Air curtain unit of size 4 ft (Location 2 x 2 in Entrance of building) for prevention of dust and conditioned air losses, single phase, 220 V, 50 HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS - CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening as specified. Make: BLUE STAR / VOLTAS

Supply and fix air curtains sensor for 4 ft Air Curtain

SUMMER APPLIANCES

Supply and fix Refrigerator electric driven single phase min capacity not less than 245 ltrs BEE 5 star rated inverter direct cool double door refrigerator Cat No. FP 283D PROTTON of Whirlpool or equivalent in Samsung / LG / Godrej

Supply, installation, commissioning of Water cooler fully stainless steel body, electric driven single phase having 80 Ltrs approx storage capacity and 60 Ltrs nominal cooling capacity per hour including built in RO UV purifier system complete all as per Blue Star Model - SWCSDLX6080UVROE Make- Blue star / Voltas / Godrej Note:- The RO / UV purifier shall be maintained / service as per manufacturer's instructionson regular intervals incl periodic replacement of membrone and filters etc. A confirmation in the form of AMC contract for a period of the two years (DLP) shall be executed by ncontractor woth OEM. Non-production of such MOU will be penalized with the recovery of 10,000 per cooler + water purifier per year.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1KVA suitable for Refrigerator. Make : V Guard / Servo or equivalent

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2KVA suitable for Water Cooler. Make : V Guard / Servo or equivalent

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4KVA suitable for Deep Freezer. Make : V Guard / Servo or equivalent

Supply, installation, testing and commissioning of Walk - in cold room of two chambers for Medical Storage of nominal size 8'x8'x8' consisting of wall and ceiling panel made out of PGI sheet filled with 60 mm PUF insulation, anti skid GI flooring on 60 mm PUF, 60mm thick swing door of 34" x 78" with both side PPGI sheet incl door heater, hydraulic door closer, digital temperature indicator, condensing unit capacity 10000 btu/h-02 Nos (one working + one standby) with matching evaporating unit working on R134a / R404a refrigerants to maintain temperature of +2 to +6 degree Centigrade at an ambient temperature of +30 degree centigrade working on 3 phase 415 V, 50Hz including automatic change over of control panel incl necessary foundation / fixing arrangement with wall for condensing unit as per OEM recommendation with shed. Consisting of following:- (i) Trap alarm with weather switch (ii) Vapour proof LED lights and wiring for cold room (iii) Automatic voltage stablizer to maintain desired voltage (iv) Drain traps for condensed water at points specified [v] Suitable racks as per the user's requirement Note:- Contractor shall be submit the necessary drawings of rack layout with size before fabrication and despatch by OEM. Make- Blue Star/Daikin/Voltas

Supply, installation, testing and commissioning of Walk - in Freezer Room of size 8'x8'x8' consisting of wall and ceiling panel made out of 127 mm thick PUF panels with PPGI sheet and marine plywood and aluminium chequred plate on top and Ante Room of size 8' x 5' x 8' consisting of wall and ceiling panel made out of 60 mm thick PUF panels with PPGI sheet and marine plywood and aluminium chequred plate on top for Blood Bank and other low temperature application , anti skid GI flooring on 127 mm PUF with marine plywood and aluminium chequred plate on top , 60mm thick swing door of size 34" x 78" with both side PPGI sheet, hydraulic door closer, digital temperature indicator, condensing unit capacity 10000 btu/h-02 Nos (one working + one standby) with matching evaporating unit working on R134a / R404a refrigerants to maintain temperature of Minus 18 to Minus 21 degree Centigrade at an ambient temperature of +30 degree centigrade working on 3 phase 415 V, 50Hz including automatic change over of control panel incl necessary foundation / fixing arrangement with wall for condensing unit as per OEM recommendation with shed. Consisting of following:- (i) Trap alarm with weather switch (ii) Vapour proof LED lights and wiring for cold room (iii) Automatic voltage stablizer to maintain desired voltage (iv) Drain traps for condensed water at points specified [v] Suitable racks as per the user's requirement Note:- Contractor shall be submit the necessary drawings of rack layout with size before fabrication and despatch by OEM. Make- Blue Star/Daikin/Voltas

Supply, install,commissioning and testing Mortuary cabinet of dimension 1194mm x 2362mm x 1745mm with Stainless steel 304 finish for single phase, 230 V, 50 Hz, with insulation thickness 80 mm, 0.5mm thick sheet PP/PP exterior front and 0.5mm SS/SS sheet interior & rest of the exterior, 3 piece carriage assembly, one piece 0.5mm sheet SS tray including vapour proof lamp, electric temperature indicator cum controller and inbuilt power panel etc. suitable for unitary type refrigeration R-404a system and temperature range of +2 to +6ºC of capacity for 02 BODY Make- Blue Star/Daikin/Voltas

Supply, install,commissioning and testing Supply and fix Voltage stabilizer for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 50KVA Make: Volina/power One/Servo Tech

ARBORICULTURE

Supply only manure (Cow dung) for bed / lawn / hedge etc all as specified and directed.

Development of the area by planting of mexicon grass with dibbling method by keeping the spacing of 30 centimeter between the tufts of grass including trenching the ground, watering, rolling, moving (if required) and de-weeding complete all as specified and directed till the grass form a thick carpet free from weeds including the cost of labour, tools and tackles complete.

Supply and plantation of flowering bed with minimum 30 cm spacing between the plants (with tantena plant) including preparation of flower beds by doing sll horticultural activities like trenching, watering, de-weeding etc, including the cost of labours, tools and tackles complete for a period till flower plants become live properly and flower bed takes proper form complete in all respect all as specified.

MANNING & OPERATION OF LIFTS

Manning & operation of fully automatic electrically operated passenger lift of any make, type and capacity to serve G+4 (i.e 5 floors,24 hrs daily) [ i.e three shifts of 08 hours per day including sunday and holiday(0600 hrs to 1400 hrs, 1400 hrs to 2200 hrs, 2200hrs to 0600 hrs)] including taking care of all lifts from any pilerage, that or damage etc in INHS Sandhani (08 passengers-01 and 15 passengers-01 total two lifts). [Employ only one lift operator per shift]

(a) First year (11 Months after completion of phase I bldg)

(b) Second year (11 Months after completion of 1st year of phase I bldg)

(c) Third year (11 Months after completion of second year of phase I bldg)

(d) Fourth year (11 Months after completion of third year of phase I bldg)

(e) Fifth year (11 Months after completion of fourth year of phase I bldg)

(f) Balance 05 months to complete 5 years manning and operation of phase I bldg

COMPREHENSIVE MAINTENANCE OF LIFTS

Comprehensive maintenance and repair of fuly automatic electrically operated passenger lift of any make and 13 and 08 passengers capacity lifts installed at INHS Sandhani, herein before in building(G+4)(Total 2 lifts) comprising of all devices and accessories through out 12 months on all days including sundays & holidays for a period of 03 years after expiry of defects liability period all as specified and directed and as shown below and all as specified and directed by GE. ( Total Two lifts of 08 passengers-01 and 15 passengers-01 of Phase-I)

(a) 1st year after expiry of defect liability period.

(b) 2nd year after expiry of defect liability period.

(c) 3rd year after expiry of defect liability period.

Comprehensive maintenance and repair of fuly automatic electrically operated passenger lift of any make and 13 and 08 passengers capacity lifts installed at INHS Sandhani, herein before in building(G+4)(Total 2 lifts) comprising of all devices and accessories through out 12 months on all days including sundays & holidays for a period of 03 years after expiry of defects liability period all as specified and directed and as shown below and all as specified and directed by GE. ( Total Two lifts of 08 passengers-01 and 15 passengers-01 of Phase-II)

(a) 1st year after expiry of defect liability period.

(b) 2nd year after expiry of defect liability period.

(c) 3rd year after expiry of defect liability period.

MANNING & OPERATION OF AC PLANTS

Manning & operation of chilled water type central AC plants for a period of 55(fifty five) months[ for three shifts of eight hours duration (0600 hrs to 1400 hrs, 1400 hrs to 2200 hrs, 2200hrs to 0600 hrs)] for all days in a week including sundays & holidays with all instruments and controls complete as specified as under and as directed by Engineer-in-charge.

(a) First year(11 Months after completion of phase-I Building)

(b) Second year(11 Months after completion of 1st year manning and operation)

(c) Third year(11 Months after completion of 2nd year manning and operation)

(d) Fourth year(11 Months after completion of 3rd year manning and operation)

(e) Five year(11 Months after completion of 4th year manning and operation)

(f) Balance 05 months to complete 5 years of manning and operation

(n) The Contractor shall maintain proper records of all kinds of daily, weekly, monthly, quarterly, half yearly and yearly or whatsoever maintenance is carried out during contract period in a binded book / register and shall obtain the signature of Engineer-in-Charge every fortnightly. (o) The contractor shall provide board at proper location near each installations duly writting the name of operators and Mobile Numbers shiftwise.

COMPREHENSIVE MAINTENANCE OF AC PLANTS

Comprehensive maintenance comprising of routine, preventive & breakdown maintenance of chilled water type central air conditioning plant installed, comprising of all devices and accessories through out 12 months on all days including sundays & holidays for a period of 03 years after expiry of defects liability period (i.e. 24 months after completion of all Phase I test) for items installed under Phase-I building all as specified and directed and as shown below:-

(a) 1st year after expiry of defect liability period.

(b) 2nd year after expiry of defect liability period.

(c) 3rd year after expiry of defect liability period.

COMPREHENSIVE MAINTENANCE OF FREEZER AND COLD ROOM

(a) 1st year after expiry of defect liability period.

(b) 2nd year after expiry of defect liability period.

(c) 3rd year after expiry of defect liability period.

NOTE FOR ITEM NO. 44.01 TO 46.04 :- penalty clause non-operational @ Rs, 5000/- per day for the plant. Period defect in chiller, motor, AHU shall invite a penalty of Rs, 20000/- per plant/machine per day.

DHARIWAL TRADERS PRIVATE LIMITED

SOOD ASSOCIATES PVT LTD

Som Projects Pvt. Ltd.

Hariom Projects Pvt Ltd

J M Mhatre Infra Pvt. Ltd.

KEC International Limited

Mukund Enterprises Private Limited