REPAIR AND CLEANING OF SEWAGE LINES, REPAIR TO DRAINS, FOOTPATH, COMPOUND WALL, MS GATES AND GRILLS AND ALLIED B/R WORKS AT INS UTKROSH UNDER AGE B/R II AT GE MINNIEBAY, PORT BLAIR

Amount

M&L for cleaning of sludges / silt from Nahani trap / floor trap including roding CI pipe from Nahani trap / floor trap to gully trap etc in position including removing of rubbish/sludge to a distance exceeding 250m not exceeding 500m complete all as specified and directed by Engineer-in-Charge.

M&L for de-watering & cleaning of septic tanks, manhole, sludge chamber etc. by pumping out sludge water manually or mechanically including cleaning of shrubs/bushes vegetation 2.50m around the septic tank and making good to usable condition of the same, including all safety precautions complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning the blockage in IWC, EWC, including roding CI pipe after opening the oval asses door of CI bend, CI branch piece (T) etc upto first MH and placing the existing oval access door in original position including removing the rubbish/sludge to a distance exceeding 250m not exceeding 500m including all safety precautions complete all as specified and directed by Engineer-in-Charge.

M&L for systematicaly cleaning and desilting of pipe sewers of any type and upto 200 mm dia including man holes and gully trap of any size and depth by passing knots, bambboo, kamti and disc of required size, pumping out liquid waste/ sewage, plugging diverting the flow in the drain, if necessary and stacking the removed silt/ sludge in deposits as directed including taking precautionary measures such as safty belts, dry cells, torch for lighting in side the manholes and drain etc, sprinkling bleaching powder on the silt/ sludge removed to avoid bad smell and disposal of silt out side MD land complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning of drains (open) including getting out depth up to 15 cm average of all vegetation, foreign materials, silt etc from drain complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning of drains by destiling mud, vegetation, debries, waste materials deposited etc, cleaning / removing manually /mechanically up to a depth of 60 cm and removing the materials outside md land, including all safety precautions complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning carefully (with fresh water) the blockage in CI / PVC pipe of following on walls & ensure all blockage perfectly cleared including necessary scafolding up to a height of 20.00M complete all as specified and directed by Engineer-in-Charge.

75mm dia pipe

110mm dia pipe

160mm dia pipe

Taking down cement plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Demolition of Precast Concrete work/ precast concrete block built in Cement Mortar including all quoins arches pillars etc complete all as specified and directed by Engineer-in-Charge.

M & L for Pre cast cement concrete block masonry using PCC, Type C-5 solid blocks, exceeding 10 cm in width and setting in Cement Mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed by Engineer-in-Charge.

S & F Weep holes PVC (SWR) pipe 110mm dia into block masonary using CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick in concrete or brick surface in CM 1:4 even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed by Engineer-in-Charge.

M & L for MS work such as fencing post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) Mild steel angles, bars, flats etc., including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

S&F Framed work such as grills, gratings gates , etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290.Gde E-165 complete all as specified and directed by Engineer-in-Charge.

M & L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,riveted or welded Fe - 290 Gde E-165 complete all as specified and as directed

S & F Mild steel screw bolts of 11 to 15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 10 cm and not exceeding 15 cm complete all as specified and directed by Engineer-in-Charge.

M & L for Steel work in tubular trusses including special shaped washer etc. complete tubes conforming to IS.1161-1979 grade St-240 complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer of any description, over 10 cm width or girth, not otherwise described complete all as specified and directed by Engineer-in-Charge.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for Plain Cement Concrete 1:2:4 type B1 using 20mm graded stone aggregate as in copings etc necessary formwork complete all as specified and directed by Engineer-in-Charge.

M & L for Plain Cement Concrete type C2 1:3:6 using 40 mm graded stone aggregate in surface channel and drain necessary formwork complete all as specified and directed by Engineer-in-Charge.

M&L for Plain Cement concrete in foundations, filling and mass concrete type D2 1:4:8 using 40 mm graded stone aggregate using necessary formwork complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced Concrete in ground floors and pavings n exc 15 cm thickness complete all as specified and directed by Engineer-in-Charge.

M&L for precast cover slab with 1:2:4 type B1 using 20mm graded stone aggregate incl cost of use and waste of clean sawn wooden form work but excl cost of reinforcement all as specified incl removal of existing unserviceable cover slab complete all as specified and directed by Engineer-in-Charge.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking and hooking ends and binding with MS wire (annealed) of dia not less than 0.90mm complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Vitreous China Squatting Pan "Orissa pattern" size 580 mm x 440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) & Provision of concrete bedding and making good to floor complete all as specified and directed by Engineer-in-Charge.

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by Engineer-in-Charge.

Dismantling of Plain or Corrugated Steel sheeting of any gauge, thickness of roof in roof coverings,wind ties complete all as specified and directed by Engineer-in-Charge.

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as per manufacturers instruction complete all as specified and directed by Engineer-in-Charge.

S&F Pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium wind ties for roof including all necessary drilling, bolting or rivetting fixed with GI self tapping screws as specified for roof sheeting complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 3.5mm dia GI chain link fencing PVC coated 50mmx50mm mesh including fixing of MS flate iron,rod & bolt to fencing post complete all as specified and directed by Engineer-in-Charge. (Note:The supply only of flat , rod & bolts shall be measured seprately).

Supply only of flat, rod & bolts for fixing of chain link fencing complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed by Engineer-in-Charge. Note : Each line wire shall be measured as one unit)

S & F in repairs GI concentina barbed tape wire fencing of dia exceeding 450 mm but not exceding 600 mm of coil when unstrectched to be provided on the top of compound wall not less than 6 (six) rounds per metre length of wall including clips as per manufacturer instructions complete all as specified and directed by Engineer-in-Charge.

Taking down shrubs / vegetation growth from crevices completely pouring herbicide in suitable proportions and making the surface good with CM 1:4 or PCC 1:2:4, upto any height with all safety equipements complete all as specified and directed by Engineer-in-Charge.

Dismantling Floor, Hearth or Wall Tiling including cement mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris of the premises complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete coloured chequered tiles 30 cm x 30 cm x 25 mm thick set,jointed in neat cement slurry and pointed with coloured cement to match , over and including 15mm thick screed bed or beeding layer in CM 1:6 as in floors / steps etc complete all as specified and directed by Engineer-in-Charge.

M & L for 300 x 300 x 8 - 10mm thick coloured vitrified heavy duty chequered tiles as in floor / wall set and jointed in cement slurry and pointed in coloured cement to match laid over 15mm thick cement mortar in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M & L for machine pressed precast concrete interlocking paver block glossy finish any shape & size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed by Engineer-in-Charge.

M & Lfor crushed Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M & L for glazed Ceramic Tiles, Coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M & L for Glazed Ceramic Tiles, Coloured, of size 450X 300X 7 to 8mm thick as in vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10mm thick in cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old plastered wall surfaces and applying one coats of acrylic wheather coat emulsion based premium quality matt finish exterior antifungal paint with one coat of primer as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old wooden surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old distempered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old distempered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new / old wall in side shaft surfaces for cleaning the fungi / algae growth by washing / scrubbing etc, including making arrangements for scaffolding and making good any damage/weak surfaces (plastering exceeding 0.5 Sqm shall be measured and paid in respective item) to match the existing surfaces and applying two coats of water proof elastomeric coating all as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 32mm waste coupling, brass, chromium plated for glazed ware sinks and basins etc, with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 40mm waste coupling, brass, chromium plated for glazed ware sinks and basins etc, with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs chromium plated wall mixer with provision for both telephone shower and over head shower with 115mm long bend pipe and wall flange fixed complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated with crutch or butterfly handle, screwed down for iron pipe etc complete all as specified and directed by Engineer-in-Charge.

Fixing only in repairs bib cock including cleaning, removing of air block/washer etc of any type and size complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Vitreous china wash hand basin, white, flat back of size 550 mm X 400 mm excluding pillar tap, and waste fittings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Fixing only in repairs pillar taps including cleaning, removing of air block/washer etc of any type and size complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Ball Brass Valve, 25 mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Ball Brass Valve, 20 mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe, cast copper alloy with crutch or butterfly handle screwed down or brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F in repairs angular cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore complete all as specified and directed by Engineer-in-Charge.

Fixing only in repairs angular cock including cleaning, removing of air block/washer etc of any type and size complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stop valves cast copper alloy chromium plated fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore complete all as specified and directed by Engineer-in-Charge.

Fixing only in repairs stop cock including cleaning, removing of air block/washer etc of any type and size complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore complete all as specified and directed by Engineer-in-Charge.

Fixing only in repairs concealed stop cock of any type and size after cleaning and removing of washer of blockage complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Vitreous China white Squatting Pan IWC of pattern long Pan of Size 580 mm 'P' or 'S' trap, front or back inlet and foot rests ( excluding cistern and flush pipe) including Provision of concrete bedding in 1:5:10 and making good to floor complete all as specified and directed by Engineer-in-Charge.

Fixing only in repairs by replacing minor parts like flushing knob, float, screws etc of PVC flush tank low level cistern, 10 ltr capacity, including connecting to existing water supply line and water closet pan complete all as specified and directed by Engineer-in-Charge.

S&F in repairs gun metal gate valves with iron wheel head screwed both ends for iron pipe of dia 20mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs gun metal gate valves with iron wheel head screwed both ends for iron pipe of dia 25mm complete all as specified and directed by Engineer-in-Charge.

S&F PVC in repairs flexible connections 16mm size of length 450mm with, brass unions and rubber washers on either side for connecting water supply line to WHB, flush tank, etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs brass chromium plated shower rose with or without swivel joint 100mm size with shower arm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC waste pipe 32mm dia 600mm long for wash hand basin complete all as specified and directed by Engineer-in-Charge.

S & F in repairs PVC waste pipe 40 mm dia 600mm long for sink complete all as specified and directed by Engineer-in-Charge.

Taking out old unserviceable PVC Pipe of size 75mm , 110mm & 150mm from trenches and walls with all fittings incl necessary excavation, RFR and Removal upto 250 m complete all as specified and directed by Engineer-in-Charge.

S&F 160mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

S&F 160mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid on walls complete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to floors complete all as specified and directed by Engineer-in-Charge.

S&F110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to floors complete all as specified and directed by Engineer-in-Charge.

Refixing old pipes after taking down any dia in old position or new position incl cleaning complete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) bend with oval access door complete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) bend / shoe without oval access door complete all as specified and directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) bend with oval access door complete all as specified and directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) bend /shoe without oval access door complete all as specified and directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) branch piece (single Y)equal or unequal with oval access door complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC (SWR) vent cowls 100mm dia complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) bend(any radius) 100mm bore of pipe diminishing pieces with oval access door complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) bend (any radius) 75mm bore of pipe diminishing pieces with oval access door complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) branch pieces 100mm ,single 'T' (equal or unequal)cordinary or invertedc(spigot or socketed type) or with parallel branches with access door complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) branch pieces 75mm ,single 'T' (equal or unequal )cordinary or invertedc(spigot or socketed type)or with parallel branches with access door complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m deep and getting out in hard / dense soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in using excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated surplus soil n exc. 50m and depositing where directed at a level n exc. 1.5m complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC (SWR) floor trap,plain with grating 75 mm incl jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC (SWR) floor trap, plain with grating 100 mm incl jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75 mm PVC nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 110 mm PVC nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.

S & F in repairs PTMT Grating square / rounded150 mm size [Minimum weight 100 Grams] without waste hole or with waste hole to insert waste pipe complete all as specified and directed by Engineer-in-Charge.

S & F in repairs PTMT Grating square /rounded100 mm size [Minimum weight 100 Grams] without waste hole or with waste hole to insert waste pipe complete all as specified and directed by Engineer-in-Charge.

Taking down old chowkats with shutter of area exc 1.5sqm not exceeding 4.0sqm including iron mongeries,screws,builders hardware etc complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, fixing in frame at site as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing, complete all as specified and directed by Engineer-in-Charge.

S & F 75 mm size, medium weight Butt Hinges, cold rolled, stainless steel including fixtures complete all as specified and directed by Engineer-in-Charge.

S&F extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and directed by Engineer-in-Charge.

S & F aluminium anodised barrel tower bolt of size 150 mm size of extruded section complete all as specified and directed by Engineer-in-Charge.

S & F aluminium anodised barrel tower bolt of size 100 mm size of extruded section complete all as specified and directed by Engineer-in-Charge.

S & F Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and directed by Engineer-in-Charge.

S & F Aluminium anodised barrel tower bolt of size 100 mm size of extruded section complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC flush tank low level cistern, 10 ltr capacity, including connecting to existing water supply line and water closet panusing 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.

Taking up or down old / chocked water tubings 15mm bore with fittings from trenches /walls and stacking at site including cleaning for refixing in new or old position or credit to contractor complete all as specified and directed by Engineer-in-Charge.

Taking up or down old/chocked water tubings 20 mm bore with fittings from trenches /walls and stacking at site including cleaning for refixing in new or old position or credit to contractor complete all as specified and directed by Engineer-in-Charge.

Taking up or down old/chocked water tubings 25mm or 32 mm bore with fittings from trenches /walls and stacking at site including cleaning for refixing in new or old position or credit to contractor complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm bore CPVC pipes of pressure rating 10kgf /Sq cm fixed complete to walls ,ceiling or in floors etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 121.00 above but 20mm bore complete all as specified and directed by Engineer-in-Charge.

All as per item No 121.00 above but 25mm bore complete all as specified and directed by Engineer-in-Charge.

All as per item No 121.00 above but 32mm bore complete all as specified and directed by Engineer-in-Charge.

M&L for Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitreous China Urinal, Half stall Long type of size 315x375x620 mm colour white incl urinal spearder of PTMT of any colour for fixing with 15 mm dia pipe (minimum weight 60 gms ) complete all as specified and directed by Engineer-in-Charge.

M&L for prepration of old painted surfaces and applying one coat of synthetic enamal (Ordinary tint ) paint on road kerb serfaces / concrete surfaces of any description over 10 cm girth or width not otherwise described complete all as specified and directed by Engineer-in-Charge.

S BOSE