TENDER FOR ITEM RATE CONTRACT FOR PROVN OF 32 FIRE POINTS , WATER COOLERS AND LED PANEL LIGHTING ETC. IN MH AND 2 AHQ SIG REGT UNDER GE(U) MEERUT CANTT

Amount

M&L plain cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate as ilintals upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in (roof kerbs or mud stops, rounded or cmamfered on edges), water troughs and the like including weathering , slightly rounded or chamfered angles and throating, as directed including necessary formwork complete all as specified.

S&F Rotational moulded poly-ethylene water storage tanks (ISI marked) ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position complete all as specified.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil surfaces formed to required slope, gradient, camber, and superelevation etc. complete all as specified.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil surfaces formed to required slope, gradient, camber, and superelevation etc. complete all as specified.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations, laying of pipe and cables etc or for shafts, well cess pits, manholes,pier holes not exceeding 10 sqm on plan ,.including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in any type of soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soil complete all as specified.

Excavating in post holes in soft/ loose soil ( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth or broken rubble mixed with earth around , in layer not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50 M complete all as specified.

M&L Earth filling under floors/ pathways or in foundations including watering and consolidation complete all as specified.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L broken brick hardcore of gauge n exc. 63 mm , deposited , spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L broken stone or boulder hardcore ( granite/basalt/trap) of gauge n exc. 63 mm , deposited , spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations / mass concrete complete all as specified.

M&L mild steel work as in hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.

M&L Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut , exc 5 but n exc 10cm long and 5 to 10mm dia of shank complete all as specified.

M&L Rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters ; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410 W grade A complete all as specified.

S&F Rolled mild steel in plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk) forming holes , with out any attachment, of Fe-410-W ( Gde-E-250) quality A complete all as specified.

M&L 100mm thick plain cement concrete type B1 (1:2:4), using 20 mm graded crushed stone aggregate,as in floor /hard standing/paving laid in alternate panels, top finished even and smooth without using extra cement complete all as specified.

M&L 75mm thick, plain cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in sub base etc. complete all as specified.

M&L Plain cement concrete type B1 , using 20 mm graded crushed stone aggregate,50mm thick as in floor top finished even and smooth without using extra cement complete all as specified.

M&L preparation of newly plastered surfaces of walls by brooming down and applying three coats of white wash on newly plastered surfaces of walls including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L preparation of plastered or unplastered surfaces of walls and applying two coats distempering with cement base paint , white or tinted on new surfaces of walls including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.

M&L15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 top surfaces finished even and smooth without using extra cement complete all as specified.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:6 , top surfaces finished even and smooth without using extra cement complete all as specified.

S&F 0.63 mm nominal thick Galvanised corrugated (grade 'A') mild steel sheeting with two corrugations side lap, fixed with 'L' type or cranked hook bolts, grading of coating 275, as in roof coverings , walls etc. complete all as specified.

S&F 0.80 mm nominal thickness Glavanised class having zn coating 275gms/ sqm, corrugated mild steel sheeting with two corrugations side lap,fixed with coach screws and washers , in roofs, walls complete all as specified.

M&L Brickwork with old size fly ash bricks, straight or curved on plan excd 6 M mean radiusin built in cement and sand mortar 1:4 complete all as specified.

M&L Brickwork with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement and sand mortar 1:4 complete all as specified.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms.) complete all as specified.

S&F Pre-painted galvalume( hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon, AZ 150 gm/sqm both side) , Zincalume (steel) based corrugated sheet 0.50mm thick ,of an approved colour, having tensile strength of 550 Mpa, and finished with resin coat on both surfaces as in roof covering/ cladding to wall,including flashings , ridges, valley etc fixed with self tapping screws complete all as specified ( Roof area shall only be be measured for the purpose of payment )

M&L Mild steel joist, channel, angle or tee sections, fixed independently with out connceting plates, etc. ( cut to ordinary lengths i.e. with in 20 mm of the length indicated),Gde Fe-410-W 'A' quality

S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M&L point wiring for one light point/fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed (FR) cables in and including 25 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed (FR) earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified for the followings:- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

M&L point wiring for one socket outlet point 3/5 pin 16 Amps on independent board controlled by one, one way switch using 4 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed (FRLS) cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and including continuous earth wire of 4sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed (FR) and connecting to earth dolly and brass screws, washers etc. complete all as specified:- Note:- The rate quoted against this item shall be deemed included for cutting chases for concealed conduit and boxes etc including making good disturbed surfaces to match with the existing.)

S&F polycarbonate Switch piano flush type, SP, 6 Amps, one way ( ISI) marked, AC, 240 Volts complete all as specified.

M&L polycarbonate insulated body ceiling rose 6A, 50x20mm dia with three terminals, ISI maked fixed complete all as specified.

S&F Lamp holder, polycarbonate type with back plate consisting retrofit LED lamp 15 watts , white complete all as specified and directed.

S&F Switch socket combination 3 pin 5A/16A, flush type , 5 in 1 complete all as specified and directed.

Taking down of old existing unserviceable wall mounted light fitting and S&F 20watts Light emitting Diode (LED) tube light fitting wall mounting , indoor decorative alumiinium extruded T5 LED battens , Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, and making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

Taking down of old existing unserviceable ceiling light fitting S&F Light emitting Diode (LED) recess mounting panel ( edgelit type) 2'x2' - 36 watts, with extruded aluminium housing and milky anti glare diffuser complete including cutting holes of required size in false ceiling and making good disturbed surfaces complete all as specified.

Supplying, installing, commissioning and testing electric driven, single phase, water coolers of capacity (40/80) cooling capacity per hour/storage capacity, complete all as specified.

S&F 2 kVA automatic line Voltage stabliser, single phase, naturally air cooled, indoor type, designed to give output voltage 225V +11% at input range between 140 to 280 Volts, with digitally displayed features, high and low cut of range voltage and time relay of 2 to 3 minutes on initial start complete all as specified.

mohanlal gupta

Jain Traders

Arun Construction Co.

KUKREJA BROTHERS

SA construction co.

LOKESH AND CO.

D S Enterprises