REPAIR, PAINTING AND POLISHING OF WOODEN AND STEEL FURNITURE AND REPAIR / REWEAVING / RECANNING AND CONVERSION OF CHARPOYS AT AGE AURANGABAD AND MIL STN BHUSAWAL UNDER GE(S) AHMEDNAGAR

Amount

Works to be executed at AGE Aurangabad

Removing of unserviceable 3 way elbow of GI charpoy and supply and fix new 3 way elbow 32mm dia , medium grade ISI marked weight not less than 450 Grams of each all as specified all as directed.

Removing unserviceable check nut of GI charpoy and supply and fix new check nut 32mm dia all as specified all as directed.

Removing of unserviceable long rail of GI charpoy and supply and fix new long rail 32mm medium grade, ISI marked Make TATA/Jindal/ Swastik/ Zenith including cutting, threading at both ends and fixing all as specified all as directed.

Converting unserviceable long rail obtained from item No 3 above in to two short rail including cutting threading at both ends and fixing all as specified all as directed.

Removing of unserviceable short rails of GI Charpoy and converting the same in to two legs including cutting, threading at one end fixing all as specified all as directed.

M&L for removing unserviceable wooden parts from chair dining and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified all as directed.

Rear legs

Front legs

Rear/front/side rails

Stiffners (with brackets)

Back rest

M&L for removing unserviceable wooden parts from chair writing and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified all as directed.

Rear legs.

Front legs.

Rear/front/side rails/including cane hole.

Stiffners.

Back rest.

Arms rest.

M&L for removing unserviceable wooden parts from chair easy and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete or equivalent as approved by GE.

Rear legs.

Front/rear/rails including cane holes.

Side rails for seat including cane holes.

Front /rear/stiffeners.

Side rails for back rest including cane hole.

Upper /lower rails for back rest including cane.

Arms rest.

M&L for removing unserviceable plastic cane from chairs , Bin soil linen and stool dressing and recanning with 2 mm wide and canning boarder 3/4 wide cane (Make of cane Komal or equivalent as approved by GE.

M&L for removing unserviceable wooden parts from Table Dining and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete or equivalent as approved by GE.

Legs for table dining 6/8 pers.

Front/rear rails of table dining 6/8 pers.

Side rails for table dining 6/8 pers.

Centre rails of table dining 6/8 persons.

Leg of table 3'x2' with/ without drawer.

Front/rear rails of table 3'x2' with/ without drawers.

Side rails of table 3'x2' with/ without drawers.

Drawers of Table 3'x2'

Front /rear top/bottom rails of table writing.

Legs of table writing.

Stiffeners of table writing.

Side rails of table writing.

Legs of table centre.

Front/rear rails of table centre.

Stiffeners of table centre.

Bottom rails for table centre.

Legs of table 2' x 2'.

Front/rear/side rail of table 2 x 2.

Leg of table 3 x 3.

Front/rear/side rails of table 3 x 3.

Legs of Table dining 4x3.

Side rails of Table dining 4x3.

Legs of peg table.

Bottom rail of peg table.

Top rail of peg table.

Leg of teapoy.

Top rail of teapoy.

Bottom rail of teapoy.

M&L for removing unserviceable wooden parts from sofa set and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete or equivalent as approved by GE.

Legs of sofa chairs 70 x 35 x 30MM.

Arms rest of sofa chairs 70X35X725MM.

Wooden bearer 40X40X670MM.

Wooden batten 50X20X670MM.

Wooden rails 35X100X670MM.

Wooden frame for head 70X35X600MM.

Wooden rails to support back frame 30X50X670MM.

Wooden bearer 40X40X1730MM.

Wooden rail 35X100X1730MM.

Wooden frame for back 70X35X1660MM.

M&L for removing unserviceable wooden parts from Bed hard and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete or equivalent as approved by GE.

Short rails of bed hard.

Long rails of bed hard.

Stiffners of bed hard.

Front leg of bed hard.

Rear legs of bed hard.

Supply and fix new head rest of bed hard/bed newar as per specification shown in the drg including removing old unserviceable head rest all as directed by Engr-in-charge.

Supply and fix new foot rest of bed hard/bed newar as per specification shown in the drg including removing old unserviceable head rest all as directed by Engr-in-charge.

CHAIR DINING WITH LONG BACK : (FD-357)

Removing existing unserviceable rear legs and S&F new rear legs made out of Teak Wood of size 25x50mm made to shape out of 60x50mm all as specified and shown on drawing.

Removing unserviceable front legs and S&F new front legs made out of Teak Wood of size 25x50mm all as specified and shown on drawing.

Removing unserviceable front/rear/side rails and S &F new front/rear/side rails made out of Teak Wood of existing size all as specified and shown on drawing.

Removing the existing unserviceable stiffeners and S&F new stiffeners made out of Teak Wood of existing size all as specified and shown on drawing.

Removing the existing unserviceable plywood 10mm and S&F new plywood 10mm thick of existing size all as specified and shown on drawing.

Removing the existing unserviceable back covered by leatherised ragzine and Supply and fix new back 50mm thick synthetic foam of 20 density with covered by leatherised ragzine (made to shape) of chair dining with long back all as specified and shown on drawing.

Removing the existing unserviceable seat covered by leatherised ragzine and Supply and fix new seat 50mm thick synthetic foam of 20 density with covered by leatherised ragzine (made to shape) of chair dining with long back all as specified and shown on drawing.

Removing unserviceable hard rubber rings and S&F new hard rubber rings all as specified and shown on drawing.

CHAIR WRITING CUSHIONED : (FD/E6/ MAP/12)

Removing the unserviceable seat and S&F new seat as per existing size made out 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around. Polyurethane foam shall be 50mm thick all as specified and shown on drawing.

Removing the unserviceable back and S&F new back as per existing size made out 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. Back form shall be designed with contour lumber support for extra comfort with PVC lipping all around as specified and shown on drawing.

Removing the unserviceable arm rest of chair writing and S&F new arm rest made of black integral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant & both hand rest sections to have slope towards front and as shown on drawing.

CHAIR COMPUTER : (FD/E6/MAP/01)

Removing the unserviceable seat and S&F new seat of size 510x470x60mm made out 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around all as specified and shown on drawing.

Removing the unserviceable back and S&F new back as per existing size made out 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. Back form shall be designed with contour lumber support for extra comfort with PVC lipping all around as specified and shown on drawing.

Removing the unserviceable arm rest of chair computer and S&F new arm rest of black integral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant and as shown on drawing.

Removing the unserviceable tubular frame of chair computer and S&F new tubular frame cantilever type and made of 25mm dia and powder coated for computer chairs and as shown on drawing.

Removing the unserviceable hydraulic shaft of chair computer and S&F new hydraulic shaft alongwith locking system for computer chairs and as shown on drawing.

Removing the unserviceable adjustable backrest of chair computer and S&F new adjustable backrest in the range of 65mm and can be locked in 5 steps for better support as per existing size as shown on drawing.

Removing the unserviceable twin wheel castors of chair computer and S&F new twin wheel castors of black colour as per existing size as shown on drawing.

CHAIR SCHOOL WITH HAND BOARD - (FD/E6/MAP/5)

M&L for replacement of hand board of chair school of Make Godrej or equivalent as approved by GE all as specified and shown on drg.

M&L for replacement of Seat of chair school Make Godrej or equivalents as approved by GE all as specified and shown on drg.

M&L for preparation of frame of chair school with hand board, wherever required shall be welded and scrapping/ cleaning of frame & painting with one coat of synthetic enamel paint black in colour all specified and as directed by Engineer-in-charge.

M&L for removing of unserviceable plywood from bed hard and S&F new ply wood 12mm thick commercial all specified and as directed by Engineer-in-charge. Make-Kitply/green ply/Archid/Century.

M&L for removing unserviceable drawer from the table dressing gents and S&F new drawer made out of 19/18mm thick prelaminated particle board as per drg and applying french polish as reqd as per directed by Engr-in-charge.

M&L for removing unserviceable top frame of table dressing gents and S&F new top frame to the existing table dressing gents and applying french polish as reqd as per specification given in drg.

M&L for removing unserviceable looking mirrior with frame from the table dressing Gents and S&F new mirrior with frame to the existing table dressing gents with mirror and applying french polish as reqd of as per specification given in drg.Make of the Mirror Modi Guard.

M&L for removing unserviceable Knob from table dressing gents and S&F new Knob of approved quality and as directed.

M&L for removing unserviceable drawer from the table dressing ladies and S&F new drawer made out of 19/18mm thick prelaminated particle board as per drg and as directed by Engr-in-charge.

M&L for removing unserviceable top frame of table dressing ladies and S&F new top frame to the existing table dressing ladies duly french polished as reqd or as per specification given in drawing.

M&L for removing frame with Mirror of the table dressing ladies and S&F new frame with Mirror to the existing table dressing ladies duly french polish wherever required. Make of mirror Modiguard.

M&L for removing unserviceable back base ply with mirror from table dressing ladies and S&F new back base ply with mirror duly french polished as reqd. Make of mirror Modiguard.

M&L for removing broken unserviceable sliding glass shutter and aluminium channel and S&F new glass shutter and aluminium channel to the existing table dressing ladies .

M&L for removing unserviceable back from Side Board and S&F new 6mm thick plywood commercial of same size duly french polished as reqd as per specification and as directed by Engr-in-charge.

M&L for removing unserviceable drawers from Side Board and S&F new drawers made out of 12mm commercial plywood of same size and applying french polish as reqd as directed by Engr-in-charge.

M&L for removing unserviceable door shutter from Side Board and S&F new door shutter of 18/19mm thick prelaminated particle board one side teak face and other balancing white with teak wood beading all around all as specified and as per drg.

M&L for removing unserviceable Knob from Side board and S&F new knob with suitable screw as directed by Engr-in-charge.

M&L for removing unserviceable top from side board and S&F new top of size 19/18mm thick prelaminated particle board one side teak face and other side white all as per drg.

M&L for removing unserviceable legs from table dressing ladies and S&F new legs made out of 1st class hard wood teak wood duly french polished as reqd as per specification and as directed by Engr-in-charge.

Material and labour for spot welding of steel furniture items of broken joints etc, not exceeding 2.5cm in length and thickness 6mm including scraping, preparing the surface of welded portion by grinding and buffing to make fit for painting and applying two coats of synthetic enamel paint over a coat of red oxide primer on welded portion by sprayer complete . Make of paint shall be Apcolite by Asian paints or equivalent as approved by GE.

M&L for removing the unserviceable tops from the following tables and S&F new tops made out of 18/19mm MDF board, one side teak finish and other side balancing white and fixing the same with the existing tables with suitable screw incl beading all around to the tops duly french polished as specified and directed by Engr-in-Charge :-

Table writing.

Table centre.

Top for teapoy verandah.

Table 600X600 MM.

Table 3X3.

Table dining 4'x3'.

Table peg.

Teapoy.

Table dining 6 persons.

Table dining 8 person.

Table 3X2 without or with drawer.

Table Computer with drawer.

M&L for removing unserviceable Parts of Table bed Side (MAP) and replacing with 12mm thick MDF board with suitable rivet/nut and bolt screw all as specificied and shown on drawings.

M&L for removing unserviceable Hasp and staple 75mm chromium plated and fixing to steel shutter and locker bed side steel with suitable rivet/nut and bolt screw all as specificied and shown on drawings.

M&L for removing unserviceable CP Handle from locker bedside & providing new CP handle 100mm and fixing with suitable screw /bolt to shutter of locker bedside steel all as specificied and shown on drawings.

M&L for removing unserviceable hinges from locker bedside and S&F new hinges with suitable welding to locker bed side steel all as specificied and shown on drawings.

M&L for removing unserviceable legs from locker bed side and S&F new legs made out of 1.00 mm thick MS plain black sheet and fixing to locker bedside steel with suitable welding, the legs shall be painted with one coat of red oxide primer and two coats of synthetic enamel paint with match the existing paint all as specificied and shown on drawings.

M&L for removing unserviceable shutter of locker bedside and S&F new shutter made out of 1.00 mm thick MS plain black sheet and painted with two coats of synthetic enamel paint to match the existing paint over a coat of red oxide primer as shown on drawing.

M&L for removing US conduit pipe and S&F new 20mm mild steel conduit pipe with socket to locker bedside steel all as specificied and shown on drawings.

M&L for removing unserviceable handle and providing new handle for Almirah large steel and Almirah med steel with shelves as per specification and shown on drawing.

M&L for removing unserviceable locking device of Almirah large steel with shelves and Almirah med with shelves and providing new locking device including cover as per specification and shown on drawing and for directed Engr-in-charge.

M&L for removing unserviceable lock from Almirah large steel with shelves and S&F new Godrej or equivalent lock with duplicate key all as specified and shown on drawing and directed by Engr-in-charge.

M&L for removing unserviceable shelves from Almirah large steel with shelves and S&F new shelves made out of 1.00mm thick MS plain black sheet as per specified and shown on drawing as directed by Engr-in-charge.

M&L for removing unserviceable legs from Almirah large steel with shelves and Almirah med steel with shelves and S&F new legs made out of 1.00mm thick MS plain black sheet as specified and shown on drawing and as directed by Engr-in-charge.

M&L for removing unserviceable clips and providing new clips to shelves of Almirah large steel with shelves and med steel with shelves as specified and shown on drawing and as directed by Engr-in-charge.

M&L for removing unserviceable locks from table office clerk and table office officer steel and S&F new locks as specified and shown on drawing and as directed by Engr-in-charge.

M&L for removing unserviceable hand rest from chair CB steel with arms and S&F new hand rest made out of 1st class hard wood Indian teak wood to the existing chairs CB steel with arms as specified and directed.

M&L for removing unserviceable seat & back from chair CB steel with arms and supply and fix new seat and back for chair CB steel with arms duly painted for following :-

Seat of chair CB steel with arms.

Back of chair CB steel with arms.

M&L for removing unserviceable seat & back from chair CB steel without arms and supply and fix new seat and back for chair CB steel without arms duly painted for following :-

Seat of chair CB steel w/o arms.

Back of chair CB steel w/o arms.

M&L for removing old unserviceable seat from chair CBA spl and S&F new seat made out of 1st class hard wood Indian teak wood duly canned with 2mm thick plastic cane as per the existing and as directed.

M&L for removing old unserviceable back of chair CBA spl and S&F new back of chair made out of 1st class hard wood Indian teak wood duly canned with 2mm thick as per the existing and as directed.

M&L for removing unserviceable seat and back in one piece made out of PVC and S&F new PVC seat & back in one piece with suitable nut bolt/screw to the existing frame. Make- Supreme/Cello/Polyset or Blowplast and as directed.

M&L for removing unserviceable prelaminated MDF board top 18mm thick openable and S&F with suitable hinged & screw on right hand side to 25mm dia mild steel pipe inserted in 20mm dia rod welded to frame.

M&L for removing unserviceable hand rest from chair CBA special with hand rest made out of 1st class hard wood Indian teak wood as per size shown on drawing duly polished as specified and directed by Engr-in- charge.

M&L for removing unserviceable plastic cane from chair verandah and recanning with 4/5mm half round plastic cane good quality including painting the frame with one coat of synthetic enamel paint all as specified and directed. Make of paint Apcolite by Asian paints high glossy or equivalent as approved by GE.

M&L for removing unserviceable planks from form without back and S&F new plank made out of 1” class Indian teak wood to the existing form without back as per specification given in drawing.

M&L for removing unserviceable Seat/Back from sofa set to seat five,four and three and S&F 100MM thick cushion of 32 density foam duly covered & stiched. Note- Tapestry cloth shall be of Bombay Dyeing /Raymond furnishing /"D" Décor , colour of cloth will be approved by GE, Make of foam Sleepwell/Curlon or equivalent as approved by GE.

M&L for removing unserviceable tapestry cloth from the existing sofa foam cushion and S&F new cushion cover out of good quality tapestry coth rate not less than Rs 250/= per mtrs and as per sample approved by GE including provn of Zib at one side of cover rest all as specified in drawing , Make : D Decore/Raymonds/Bombay Dying.

M&L for removing unserviceable frame of square tube from form without back and S&F new square tube wherever required to existing form without back with suitable welding all as shown on drawing.

M&L labour for painting to the frame of form without back with one coat of synthetic enmal paint black all as per specification and shown on drawing.

M&L for removing dent and bends of following steel furniture articles and applying two coats of synthetic enamel paint over a coat of red oxide primer by sprayer complete.

Almirah large steel with shelves.

Almirah med/small with shelves.

Locker bed side steel.

Table with drawer steel.

Table office clerk steel.

Table office officer steel.

Table dining ORs.

Chair CB steel with arms.

Chair CB steel without arms.

Chair verandah steel with white paint.

Chair CBA special.

M&L for removing existing polish of following wooden furniture and applying melamine by Asian Paints /Nerolac/Berger paints strictly as per manufactures instructions. Note:-Colour of polish shall be approved by GE.

Book shelf open small.

Book shelf open large.

Bed hard with ply top.

Chair WB without arms.

Chair writing.

Chair dining.

Chair easy.

Sofa set 4 seater.

Sofa set 5 seater.

Table centre.

Table peg.

Table dining 6 person.

Teapoy.

Table bed side.

Table dressing Gents with mirror.

Table dressing ladies with mirror.

Table writing.

Table dining 8 pers.

Bin soil linen.

Side Board.

Works to be executed at AGE Bhusawal

Removing of userviceable 3 way elbow of GI charpoy and supply and fix new 3 way elbow 32mm dia , medium grade ISI marked weight not less than 450 Grams of each directed. FD-220

Removing of unserviceable long rail of GI charpoy and supply and fix new long rail 32mm medium grade, ISI marked Make TATA/Jindal/Swastik /Zenith including cutting, threading at both ends and fixing all as directed .

Converting the unserviceable long rail obtained from item No 68 above into two short rail including cutting threading at both ends and fixing all as specified all as directed.

Removing of unserviceable short rails of GI Charpoy and converting the same in to two legs including cutting, threading at one end fixing all as specified all as directed.

Removing of existing wornout newar of GI charpoy and reweaving the charpoy with new 50/55mm wide nylon newar of vIrgin quality weighting not less than 1.50 Kg per charpoy after tightening the loose components including provn of 3mm thick 50mm dia MS circular plate welded to the legs all as specified all as directed. Note :- Weaving shall be closely done on both side.

Removing of old unserviceable Locks of steel Almirah Large, Steel & Medium and S & F new locks 6 lever with duplicate keys Make : Standard or equivalent as approved by GE.

Removing of old unserviceable locks of modular tables and side board and S&F new locks with duplicate keys Make : Standard or equivalent as approved by GE.

Removing of old unserviceable Handle of Almirah Large steel and Med steel and S & F new steel handle CP with bolts ISI marks all as per drg and directed

Removing of old and unserviceable Locking rod of Almirah Large steel and S & F new Locking MS rod all as per drg and directed

Removing of old unserviceable Shutter of Almirah Large steel and S & F new shutter made of MS sheet 1mm thick all as per drg and directed

Removing of old unserviceable Shelves of Almirah large steel and S & F new Shelf made out of 1 mm thick MS sheet all as per drg and directed

Removing of old unserviceable Locking rod of Almirah Medium steel and S & F new Locking MS rod all as per drg and directed

Removing of old unserviceable Shelves of Almirah Med steel and S & F new Shelf made out of 1 mm thick MS sheet all as per drg and directed

Removing of old unserviceable Shutter of Almirah Med steel and S & F new shutter made of MS sheet 1mm thick all as per drg and directed

Removing of old unserviceable Legs of Almirah Med steel and S & F new legs made out of 20 gauge MS sheet all as per drg and directed

S & F Shelves supporting clips for steel almirah with required Nos of screw etc all as per drg and directed by Engineer-in-charge

Removing of old unserviceable Shutter of Locker bed side steel and S & F new shutter made of MS sheet 1mm thick all as per drg and directed

Removing of old unserviceable Shelves of Locker bed side steel and S & F new Shelf made out of 1 mm thick MS sheet all as per drg and directed

M & L for removing existing unserviceable drawers from table office officer & table office clerk, S&F new drawer from 1mm thick MS steel duly painted with olive green synthetic enamel paint over a coat of primer and as specified and directed by Engineer-in-charge.

Removing of old unserviceable top of Table office clerk steel , and S&F new 'top' made out of prelaminated particle board exterior grade 18 mm thick make-novapan/eco board and 6 mm thick teak wood beading shall be provided all around of 'top' duly french polishing all as specified'showing on drg and as directed

Removing existing unserviceable cane from seats of Chair Writing and supply & fix caning with 2 mm wide white colour cane plastic in Godrej pattern (Honey comb pattern ) all as specified and directed

Removing existing unserviceable cane from seats of dining Chair and supply & fix canning with 2 mm wide white colour cane plastic in Godrej pattern (Honey comb pattern ) all as specified and directed

Removing existing unserviceable front legs of dining Chair and supply & fixing legs of first class teak wood duly polishing all as specified and directed

Removing existing unserviceable side rail of dining Chair and supply & fixing side rail of first class teak wood duly polishing all as specified and directed

Removing existing unserviceable rear legs of dining Chair and supply & fixing legs of first class teak wood duly polishing all as specified and directed

Removing existing unserviceable cane from seats and back of Easy Chair and supply & canning with 2 mm wide white colour cane plastic in Godrej pattern (Honey comb pattern ) all as specified and directed.

Removing existing unserviceable front legs of Chair easy and supply & fixing legs of first class teak wood duly polishing all as specified and directed

Removing existing unserviceable Rear legs of Chair easy and supply & fixing legs of first class teak wood duly polishing all as specified and directed

Removing existing unserviceable Hand rest/arms of Chair easy and supply & fixing Hand rest/arms of first class teak wood duly polishing all as specified and directed

Removing existing unserviceable seat/ back frame of Chair easy and supply & fixing new seat/ back frame of first class teak wood duly polishing with holes for canning and supply & canning with 2 mm wide white colour cane plastic in Godrej pattern (Honey comb pattern) all as specified and directedall as specified and directed

Removing of old unserviceable Drawer of Table Dressing Ladies and S & F new Drawer of 6mm plywood and 18mm prelaminated particle board all as specified and shown on drg.

Removing of old unserviceable back ply of Table Dressing Ladies and S & F new ply 6mm thick , ISI Mark all as specified and shown on drg.

Removing of old unserviceable mirror of Table Dressing Ladies and S & F new mirror 5mm thick of size all as specified and shown on drg.

Removing of old unserviceable legs of Table Dressing Ladies and and S&F new legs of 1st class teak wood all as specified and shown on drg.

Removing of old unserviceable top of Table Dressing Gents and S & F new Top with 12mm perilaminated particle board all as specified and shown on drg.

Removing of old unserviceable Drawer of Table Dressing Gents and S & F new Drawer of 6mm plywood and 18mm prelaminated particle board all as specified and shown on drg.

Removing of old unserviceable back ply of Table Dressing Gents and S & F new ply 6mm thick all as specified and shown on drg.

Removing of old unserviceable mirror of Table Dressing Gents and S & F new mirror 5mm thick of size all as specified and shown on drg.

Removing of old unserviceable bottom ply wood of Table Dressing Gents and replacement of 8mm thick plywood all as specified and shown on drg.

Removing existing unserviceable cane from seats of Chair Office CB and chair Office CBA and supply & caning with 2 mm wide white colour cane plastic in Godrej pattern (Honey comb pattern) all as specified and directed.

M& L for removing existing unserviceable knobs from drawers of table dressing ladies,table dressing Gents, table writing ,Table 3'x2' ,side boards etc and S&F new knobs 40mm dia all as specified & as directed by Engineer-in-charge.

Removing of old unserviceable Top of wooden locker bed side and S & F Top made of 18mm thik prelaminated partical board exterior grade, ISI Mark Make-Novapan/Ecoboard or equivalent as approved by GE all as specified and shown on drg.

All as per Item No. 108 above but bottom,and all legs fixed at the bottom.

All as per Item No. 108 above but front door complete.

Removing of old unserviceable leg of locker bed side and S & F leg of teak wood.

Removing of old & unserviceable Hasp & staple of locker bed side and S & F new Hasp & staple 75mm ISI Mark all as per drg and directed.

Removing of old & unserviceable ply from back side of locker bed side and S&F new ply 6mm thik ISI mark make-Kitply/National all as specified and shown on drg.

M&L for for two coats of spray painting with first quality synthetic enamel paint of approved color on both inside and outside of bed side locker after cleaning by sand paper and over a coat of red oxide primer.

Removing of old unserviceable piano hinges of locker and fixing new steel approved quality piano hinges all as specified and shown on drg.

Removing of damage plywood top of Bed hard Modern furniture moulded and supply and fix new 12 mm thick commercial plywood ISI Mark all as per drawing Make of Plywwod : Kit ply/ Anchor /Bhutan Board/Archild lam/Green lam.

Removing of damage plywood top of Bed plywood top and supply and fix new 12 mm thick with commercial plywood ISI Mark all as per drawing fixed with 08 Nos screws Make of Plywwod : Kit ply/Anchor/Bhutan Board/Archild lam/Green lam.

Removing of damaged bottom support of bed plywood top and supply and fix Teak Wood bottom support for bed plywood top duly polished with french polish,, all as specified directed by Engineer-in-charge

Removing of damaged long rails of bed plywood top and supply and fix long rails for bed plywood top of first class teak wood duly polished with french polish, well seasoned free from crack, all as specified directed and shown on drg

Removing of damaged legs of bed plywood top and supply and fix new legs of first class teak wood duly polish with french ploish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of old unserviceable top of Teapoy and S&F new 600x450mm 'top' made out of prelaminated particle board exterior grade 18 mm thick make-novapan/eco board and 6 mm thick teak wood beading shall be provided all around of 'top' duly french polishing all as specified'showing on drg and as directed.

Removing of damaged legs of Teapoy and supply and fix new legs of first class teak wood duly polished with french polish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of damaged side rail of Teapoy and supply and fix new side rail of first class teak wood duly polish with french ploish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of old unserviceable top of Peg Table 450x300mm , and S&F new 'top' made out of prelaminated particle board exterior grade 18 mm thick Make: Novapan/ ECO board and 6 mm thick teak wood lipping shall be provided all around of 'top' duly french polishing all as specified'showing on drg and as directed.

Removing of damaged side rail of Peg Table and supply and fix new side rail of first class teak wood duly polished with french ploish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of damaged legs of Peg Table and supply and fix new legs of first class teak wood duly polished with french ploish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of old unserviceable top of Table Centre 900x450mm, and S&F new 'top' made out of prelaminated particle board exterior grade 18 mm thick Make: Novapan/ ECO board and 6 mm thick teak wood beading shall be provided all around of 'top' duly french polishing all as specified'showing on drg and as directed.

Removing of damaged legs of Table Centre and supply and fix new legs of first class teak wood duly polished with french polish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of damaged side short rail of Table Centre and supply and fix new side short rail of first class teak wood duly polished with french polish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of damaged side long rail of Table Centre and supply and fix new side long rail of first class teak wood duly polished with french polish, well seasoned free from crack, all as specified directed and shown on drg.

Removing og old unserviceable legs of Table writing and supply and fixing leg made of 1st class Teak wood all as specified shown on drg and as directed by Engineer-in-charge.

Removing of old unserviceable top of Table Writing, and S&F new 'top' made out of prelaminated particle board exterior grade 18 mm thick Make: Novapan/ ECO board and 6 mm thick teak wood beading shall be provided all around of 'top' duly french polishing all as specified'showing on drg and as directed.

Removing of old unserviceable shutter of Table Writing, and S&F new shutter made out of prelaminated particle board exterior grade 18 mm thick Make: Novepan/ ECO board all as specified showing on drg and as directed.

Removing of old unserviceable side of Table Writing, and S&F new side made out of prelaminated particle board exterior grade 18 mm thick Make: Novepan/ ECO board all as specified'showing on drg and as directed.

Removing of old unserviceable legs of table dining 6/8 persons and S&F new legs made out of teak wood duly french polished all as specified and as shown on drg and as directed by Engineer-in-charge.

Removing of old unserviceable side long rail of table dining 6 persons and S&F new side long rail made out of 1st class teak wood duly french polished all as specified and as shown on drg and as directed by Engineer-in-charge.

Removing of old unserviceable top of table dining 6 persons, and S&F new 'top' size 1500x900 mm made out of pelaminated particle board exterior grade 18 mm thick Make: Novepan/ ECO board and 4 mm thick teak wood lipping shall be provided all around of 'top' duly french polished all as specified and as shown on drg and as directed by Engineer-in-charge.

Removing of old unserviceable 'top of table dining 8 persons, and S&F new 'top' size 1800x900 mm made out of prelaminated particle board exterior grade 18 mm thick Make: Novepan/ ECO board and 4 mm thick teak wood lipping shall be provided all around of 'top' duly french polishing all as specified and shown on drg and as directed by Engineer-in-charge.

Removing of existing unserviceable rubber shoes of table dining ORs and S&F with hard PVC shoes as per existing shape and size all as specified,showing on drg and as directed.

Removing and replacement of cushions and tapestry cloth best quality not less than Rs 200/- per meter for seat ,back of Chair dining Moulded all as directed by Engineer-in-charge.

Removing and replacement of cushions and tapestry cloth best quality not less then Rs 200/- per meter for seat ,back of Chair revolving all as directed by Engineer-in-charge.

Removing of unserviceable components of hydraulic system and supply & fixing new hydraulic system in chair revolving all as directed by Engineer-in-charge.

S & F cushion 21"x21"x4" covered with best quality tapestry cloth not be less than Rs 200/- per meter and provided with Zip for sofa as approved by Engineer-in-charge.

Removing old unserviceable cushion seat and back and S&F new readymade 100mm thick 32 density cushion foam and covered with tapestry cloth(not less than Rs 250/- per meter) duly stitched make-feather foam or sleep well for set of sofa set 4 seater in two pieces (2+2) modular type including repair to laminations.

Removing old unserviceable cushion seat and back and S&F new readymade 100mm thick 32 density cushion foam (size of Seat of 3 seater 68"x24"x4" ,back of 3 seater 68"x18"x4" seat of single seater 22"x24"x4" and back of single seater 22"x18"x4"), and covered with tapestry cloth (not less than Rs 250/- per meter) duly stitched make-feather foam or sleep well for sofa set 5 seater in three pieces 3+1+1) modular type including repair to laminations.

Removing old unserviceable legs of side board and supply and fix new legs made out of teak wood duly french polished all as specified and as directed.

Removing old unserviceable side of side board and supply and fix new side board of 18mm thick prelaminated particle board all as specified and as directed.

Removing old unserviceable Top of side board and supply and fix new Top of 18mm thick prelaminated particle board all as specified and as directed.

Removing old unserviceable shutters two nos of side board and supply and fix new shutter with 18mm thick prelaminated particle board fixed with piano hinges all as specified and as directed.

Removing old unserviceable back ply of Table bed side and supply and fix new back ply of 6mm thick ply wood commercial all as specified and as directed.

Removing old unserviceable sides of Table bed side and supply and fix new sides of 18mm thick prelaminated particle board all as specified and as directed.

Removing old unserviceable top of Table bed side and supply and fix new Top of 18mm thick prelaminated particle board all as specified and as directed.

M & L for removing exiting unserviceable cane plastic from chair varandah painting with one coat of synthetic enamel white paint and recanning with new 4mm wide white colour cane plastic in mat pattern closely woven .

M&L for spray painting with one coat synthetic enamel paint of following steel furniture including prepration of old painted surface all as specified and as directed by Engineer-in-charge.

Almirah Large steel with Shelve.

Almirah large steel 1/2H 1/2 Shelve.

Almirah Med Steel.

Locker Steel.

Rack Boot.

Rack steel 78"x36"x19".

Rack steel 72"x36"x15".

Form without Back.

Table office clerk.

Table office officer.

Material and labour for polishing of furniture including scrapping of rough surface and old worn out polished layer with scrapper /sand paper for smoothing the surface and polishing the same and applying melamine by Asian Paints /Nerolac/Berger paints strictly as per manufactures instructions.Note:-Colour of polish shall be approved by GE.

Chair easy

Chair Dining.

Chair writing.

Table bed side.

Table dining 8 persons.

Bed Hard/Bed Newar.

Table 600x600x760mm.

Sofa set four seater.

Sofa set 5 seater in 3 pieces.

Table dining 6 pers.

Table writing.

Table 900x600 with/without drawers.

Table peg.

Teapoy.

KAMINS CARE (BID ID -3159251)

KASTURILAL HARICHAND OHRI AND SONS (BID ID -3156790)

Mahesh Traders (BID ID -3157964)