PROVN OF INTERLOCKING TILES, TILING IN CHILDREN WASHROOM, TOILET, KOTA FLOORING GRANITE SHELF AND TILING, COVERED PATHWAY, ALUMINIUM FRAME WINDOWS WITH GLASS, PARAPET WALLS OF OTM ACCN AT BATHINDA MIL STN

Amount

SCHEDULE 'A' B/R Works

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cess pits, manholes, for taking out old pipe and laying new pipe line, for laying cable etc. not exceeding 10 Sqm on plan and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed by Engineer-in-charge.

Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge.

Returning and filling including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Material and labour for PCC ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling, sub base of floors and mass concrete complete all as specified and as directed by Engineer-in-charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, chajjas, cantilevers, shelves including supports,overhangs,etc. also splays between floors and beams, etc.complete all as specified and directed.

Formwork to sides of pillars,posts, struts, piers, columns and stanchions complete all as specified and directed.

Formwork to fair finished soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Note:- Rate includes for ceiling plaster 5mm thick in CM 1:3 complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

As per item No 9.00 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) as in Foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) as in Beams, cantilevers, bressummers, chajjas, lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and , parapet, in shelves and the like complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks,(old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ (old size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 all as specified and directed.

M&L rendering 15 mm thick on internal surface at any story or any height in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement all as specified and directed by Engineer in charge

M&L for rendering 15mm thick in CM (1 :4) at any story or any height mixed with water proofing coumpound @ 200ml per bag of cement on brick work or concrete surfaces on wall /roof finished even & fair complete all as specified & as directed. Note:- Water proofing compound will be measured separately.

M&L rendering 10 mm thick on ceiling surfaces in CM 1:3 finished even and smooth without using extra cement all as specified and directed by Engineer in charge

M&L rendering 5 mm thick on ceiling surfaces in CM 1:3 finished even and smooth without using extra cement all as specified and directed by Engineer in charge

Supply only liquid water proofing compound complete all as specified and as directed.

M&L preparing newly plastered surfaces of wall, pilasters, comices etc and applying two coat of water based exterior emulsion over and including a coat of primer over a coat of white cement based putty as Approved by GE complete all as specified & as directed.

M&L preparing newly plastered surfaces of wall, pilasters, comices etc and applying two coat of oil bound distemper over a coat of white cement based putty complete all as specified & as directed. Note:- Birla white putty will be measured separately

M&L for applying 3mm thick one coat of white wall care putty on walls complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for 25 mm thick PCC 1 : 2 : 4 type B-0 (using 12.50mm graded stone aggregate) as in floor complete all as specified and directed.

M&L for 25 mm thick PCC 1 : 2 : 4 type B-1 (using 12.50mm graded stone aggregate) as in floor complete all as specified and directed.

M/L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed.

M&L for coloured glazed ceramic tiles in vertical surface 300x600X7/350x250x7/450x350x7mm thick set and jointed over and including 10 mm thick rendering even and rough in CM1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for granite (any type) 18- 20 mm thick work(table rubbed and polished) in steps, counter sunk wash basins, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F vitreous china wash down water closed pan(pedestal Pattern), white(excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover complete all as specified and directed.

S&F vitreous china squatting pan "Orissa Pattern" size 580mm x 440mm white with integral foot rests, including prov of cement concrete bedding and 'P' or 'S' trap as required complete all as specified and directed.

Supply and fixing 15mm bore 2 way bib cock with flange, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed, complete all as specified and directed by Engineer-in-Charge.

S&F health faucets CP with 1.00 mtr long CP flexible pipe and hook fixed complete all as specified and as directed.

S&F vitreous china wash basin oval type, counter sunk, of size 460x310x220mm including CP waste coupling, PVC waste pipe and fixing in position complete all as specified and directed.

S&F pillar cock swan neck CP fancy type of standard quality and size complete all as specified and as directed.

S&F 15 mm GI tube medium grade concealed with all necessary fittings and fixed complete to wall and ceiling or laid in floors including Cutting chases ,pinning in making good to facing where required and pointing in CM 1:3 to edges of landing , steps , cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubingcomplete all as specified and directed.

S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F 15 mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F 15mm dia stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed.

S&F Chromium plated shower rose 150mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed..

S&F 15mm bore dia Chromium plated stop valve/angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F PVC connection 15mm dia of length not less than 450mm with both ends, brass fly nut complete all as specified & as directed.

S&F Brass chromium plated tubular towel rail, 20 mm dia, D type, 600mm long with and incl CP brass screws and wooden/plastic cleats complete all as specified and directed.

S&F MS cromium plated, soap tray approximate 160mm, including fixing to wall with CP screws and PVC plug complete all as specified and directed by Engr-in-Charge

S&F soap dish CP fancy type of standrad quality and size complete all as specified and directed by Engr-in-Charge

S&F toilet paper holder CP of standard quality and size complete all as specified and as directed.

S&F corner glass shelf (with bracket) made up of glass 30 cm in size complete all as specified and as directed by Engr-In-charge.

S&F sheet glass shelf assembly (with bracket) consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engr-In-charge.

S&F vitreous china urinal of size 410x380x950mm, half stall type white, with grating and union for discharge pipe (excluding flushing cistern and flush pipe ) including CP urinal spreader and CP connection and waste pipe complete all as specified and directed.

S&F 8mm thick superior quality toughened glass for urinal partition fixed with SS brackets on walls complete all as specified and as directed by Engr-In-Charge.

S&F75mm dia cast iron floor/Nahani trap with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F 100mm bore soil waste and vent pipes CI ( sand cast) in any lengths with or without ears fixed on walls with stack clamp of flat iron at fixed interval as directed by Engr-in-Charge or under floors with cement joints including taking down old CI pipes with fittings complete all as specified and as directed by Engr-in-Charge.

S&F 75mm bore soil waste and vent pipes CI ( sand cast) in any lengths with or without ears fixed on walls with stack clamp of flat iron at fixed interval as directed by Engr-in-Charge or under floors with cement joints including taking down old CI pipes with fittings complete all as specified and as directed by Engr-in-Charge.

S&F 100mm bore cast iron plain bends Tapers etc complete all as specified and directed.

S&F 75mm bore cast iron plain bends Tapers etc complete all as specified and directed.

S&F 100mm bore cast iron cowls complete all as specified and directed.

S&F 75mm bore cast iron cowls complete all as specified and directed.

Hardcore of Broken stone or boulders of gauge n exc. 63 mm, deposit-ed, spread and lev-elled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 as in plinth protection 75mm thick complete all as specified and directed.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping, mud stops, kerb and similar work including slightly rounded or chamfered angles and including necessary form work complete all as specified and directed.

M&L for sand filling under paver block including consolidation complete all as specified.

M&L for machine pressed pre cast concrete paver block reflective type any shape and size of 60mm thick M-35 gde with grey cement and pigments (Coloured) complete all as specified and directed.

S&F powder coated aluminium powder coated (Minimum thickness of powder coating 50 micron) as in Doors, windows,ventilators,partitions shutters and frames,with or without sash bar, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Eng- In-Charge.

S&F powder coated aluminium (Minimum thickness of powder coating 50 micron) as in windows and ventilator shutters, without sash bars, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles ,hinges,tower bolt, aluminium snap beading, screws etc. complete all as specified and directed by Eng- In-Charge.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire sta-ples complete all as specified and as directed .

S&F 105X60mm pressed steel frames Pre-painted for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face pannels , decorative type sunmica (1 to 1.5mm thick) pasted on bothsides and edges covered with waterproof beading complete all as specified and design approved by Engr-in-Charge.

M&L cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frames of pressed steel and in bed blocks etc complete all as specified and as directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 100 mm steel butt hinges medium weight,cold rolled complete all as specified and directed.

S & F 150 mm size extruded aluminium alloy handles cast type anodised complete all as specified and directed.

M&L for 150 mm bore salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2, concrete bed to drain pipes 100 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed.

S&F 1000 Ltr rotational moulded polyethylene water stotage tanks ( cylinderical verticle with closed top) hoisted & fixed in position complete all as specified and directed.

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F 20 mm bore gun metal or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L for precast cement concrete Type B1 1:2:4 (20mm graded aggregate) as in landings, cover slabs, precast man hole covers, set in CM 1:6 complete all as specified and directed.

S&F 25mm dia curtain rails, mild steel, chromium plated with fixing fancy type brackets, side knob, stops rollers etc complete all as specified and directed.

Cutting into existing manholes for connecting new drains150mm dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for provn of water proofing roof treatment to accessible/Non accessible RCC roof with APP modified membrane with non woven polyster reinforced wt not less than 3 Kg/Sqm of thickness not less than 3 mm having thermal insulation with white mineral/ gravel finish on upper side of membrane uniformely embedded during manufacturing process . All as per following specifications:(a) The surface of the roof, parapet and gutters, drain mouths etc. over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the grove shall be cut around to tuck in the treatment as pipes, chimneystacs etc. and other similar situations to ease up about corners.(b) Bituminous primer conforming to IS : 3384-1965 @ 0.30 Kg/Sqm to be applied an prepared surface till the surface is properly impregnated.(c) APP modified water proofing membrene as specified shall be laid on the primer surface by torch application method as per manufacturers instructions, The overlaps while torching shall be 100 mm in both directions(longititudinal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrene layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer.

M&L for precast machine pressed cement concrete tiles with grey cement and no pigments of size 250x250x20 - 25mm thick conforming to IS 1237-1980 set in cement slurry laid jointed and pointed in neat cement slurry including bedding layer of 15mm thick screed in CM 1:4 as in roof complete all as specified & directed.

Demolition of cement concrete reinforced up to triple storey building in parapets,chajjas, fins, fascias similar suspended works, including reinforcement cut as required to facilitate demolition and prepare the surface to casting chajja, slabs, fins, facia etc and including removing rubbish material from site and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-charge.

S&F mild steel work as in tubular (round/square/rectangular shape of pipes as approved by Engr-In-Charge) as in parapet grill,connecting plates,and similar work up to triple storey building including post special shaped washers etc complete incl necessary nut bolts, wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 complete all as specified and directed by Engr-in-Charge.

M&L preparation of new steel surfaces & applying two coats of synthetic enamel paint over one coat of red oxide primer over 10cm width or girth all as specified.

Supply & fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors or fixed in walls, complete all as specified and as directed by Engineer-in- charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in (soft/loose soil) including removing excavated soil to a distance n.exc 50mtr complete all as specified and directed by Engr-in-Charge.

Matrial and labour Machine pressed precast concrete coloured yellow and red interlocking paver block shape and size approved by Engr-In-Charge confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all specified and as directed by Engr-In-Charge.

M&L cement concrete type C-1,1:3:6 ( 20mm graded stone aggregate) as in copings, packing around interlocking paver blocks complete all as specified and as directed.

M&L precast cement concrete (1:2:4) type B1(using 20 mm graded stone agg) in kerb stone, quion block, apex stones etc set in CM (1:4) incl form work weathering, slightly rounded or chamfered angles and throating including necessary excavation all as specifed and directed

M&L for preparation of new or previously treated/untreated concrete surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint in different tint complete all as specified and as directed.

M&L for excavating in Post holes soft/loose soil (or similer holes) not exc 0.50 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cum watering and including removing excavated soil to a distance not exc 50 m and making good surface complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type C-1 (1:3:6) (using 20mm graded aggregate) as in postholes, foundations, filling and mass concrete, side kerb, haunching and like complete all as specified and directed by Engr-in-Charge.

S&F for Pre -Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm Thickness of any colour (red/green/blue) having aTensile strength of 550 MPA as in roof covering fixed with 'L' type or 'J' type or cranked hook bolts all as specified and directed by Engineer-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L 100mm thick cement concrete type D-2, 1:4:8 ( 40mm graded stone aggregate ) as in sub base of floors complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete

M & L for Vitrified ceramic tile 7 to 8 mm thick,light shade polished area of each tiles n exc 0.36 sqm as in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 15 mm thick screed bed in CM (1:6).complete

M & L for Vitrified ceramic tile 7 to 8 mm thick,light shade polished area of each tiles n exc 0.36 sqm as in Skirting/dados etc set & jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) complete as directed by Engineer-in-Charge.

Taking down cement or cement lime plaster includiing raking out joints ,hacking for key and scrubbing down with water complete, all as specified and directed by Engineer in charge

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint (one coat as a priming coat) complete all as specified and directed by Engr In Charge

Dismantling stone slabs, kota stone and tiles of any description or thickness in floors, apron etc laid bedded and pointed in any ,mortar.complete all as specified and directed by Engr In Charge

M&L machine cut Kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over & including 20 mm thick screed bed in CM 1:6 all as specified and directed by Engineer in charge

M&L machine cut Kota stone slab flooring 18-20 mm thick in riser of steps,skirting,dados etc. over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over & including 15 mm thick plaster in CM 1:4 all as specified and directed by Engineer in charge

Material and labour for complete removal of existing treatment (any layers of existing treatment ) on walls/pillars/cornices by scraping down with using mechanical sander machine (including provision of dust sucking), upto entire satisfaction of Engineer-in-charge, brooming and washing down and preparing the surfaces smooth by applying chalk whitening,preparatory to distempering and after tha applying two coats of oil bound distemper (washable) as approved tint/colour with using electric paint roller or roller brush with using electric paint roller or roller brush complete

Taking down steel windows/ventilators with peg stay,handles,tower bolt,guard bars including iron mongary, steel work but exluding framed truss complete.

S&F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed

S&F powder coated aluminium grill of approved design/pattern, with approved standard section and fixed to window frame with stainless steel screws complete

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pin/springs clips

Supply and fixed 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed by Engineer in charge

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each

Supply and fixed powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

Supply & Fixing 125 mm long anodized aluminium handle, ‘D’ type.

S&F Wall lining/panelling cosisting of 5 mm thick Plain colour PVC sheet complete all as specified and directed by Engineer in charge

Demolition Brickwork of stone/boulder masonry, build in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr In Charge

M&L Chequered cement concrete tiles 20x20x25 mm thick with grey cement and no pigments set jointed and pointed in neat cement slurry laid over 20 mm thick 1:4 screed bed complete all as specified

Demolition of cement concrete (unreinforced) in ground floor and above ground floors and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge

S&F 15 mm bore gun metal or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls/ laid in trenches/floors including taking down old pipe with fittings complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm dia complete all as specified and directed. .

S&F PVC (SWR) gully trap 125/110 mm,setting and jointing with solventcement Square or round type P or S trap complete all as specified and directed

S&Fin repair stainless steel grating doom 100mm dia (min weight 25gms) complete as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames, wooden/PVC doors/steel ventilator) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.

Supply and fixed solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-Charge

Supply and fixed factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 100mm long powder coated mild steel butt hinges medium weight cold rolled complete all as specified & directed by Engineer-in-charge.

Supply and fixing anodised aluminium handle cast type 125mm long complete all as specified & directed by Engineer-in-charge.

Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern (white colour) with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe, PVC Connection 450 mm long with PTMT nuts suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair vitreous China squatting pan 'Orissa' pattern white of size 580mmx440mm white with integral foot rests and CI 'P' or 'S' trap (excluding flushing cistern, flush pipe above floor), including demolation of tile, PCC, taking out mass concrete filling and re filling PCC (1:7:12) type F2 after fixing of WC and trap with proper joints leakproof including PVC flush pipe upto finished floor level, and making good with 30mm thick cement concrete (1:2:4) type B0 finished rough as a sub base to recieved tile work and including all other connected work as required upto entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engineer-in- charge. (NOTE : Tile work with screed and Sunken floor water proofing treatment shall be measured and paid separately under appropriate item of this schedule.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including jet spray complete in all respect all as specified.

S&F in repairs Vitreous china (White) Wash Hand Basin (WHB) Counter sunked in Granite slab, white, size 550x400mm including fancy type 32mm waste coupling and PVC waste pipe complete all as specified and directed by Engr-in-Charge

S&F in replacement vitreous china urinal of size 410x380x950mm, half stall type white, with grating and union for discharge pipe (excluding flushing cistern and flush pipe ) including CP urinal spreader and CP connection and waste pipe complete all as specified and directed.

S&F in replacement vitreous china urinal of size, half stall baby urinal type white, with grating and union for discharge pipe (excluding flushing cistern and flush pipe ) including CP urinal spreader and CP connection and waste pipe complete all as specified and directed.

Supply & fixing in replacement 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in replacement hand shower (health faucet) ABS body including 1 meter long 8mm dia flexible tube and including wall hook including taking down old any type shower complete all as specified and as directed by Engineer-in-charge.

SCHEDULE 'A' E/M Works

Material and labour for concealed point wiring with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow, junction box, pressed steel powder coated sunken box of suitable size (min 60mm deep, suitable lenth and 1.2mm thick), 3mm thick bakelite plastic laminated sheet for mounting switches and socket, fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc., including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge.

All as per item No 142 here in before but for socket outlet 5 pin 5 Amp on same board, complete all as specified and as directed by Engineer-in-Charge.

All as per item No 142 here in before but for socket outlet 5 pin 5 Amp on independent board but not below the switch board, complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No 142 here-in-before but socket out let one 6 pin, 6/16 Amps, 2 in 1 with cable 2.5 Sqmm multistranded copper conductor FRLSH cable on the independent board including provision of 2.5 Sqmm PVC insulated copper conductor FRLSH cable continuos as earth wire connected to earth dolly conductor etc., complete all as specified and as directed by Engineer-in-Charge.

M& L Lamp holder PVC/polycarbonate type with back plate suitable for battern fitting with LED bulb 9W Complete all as directed.

Supply and fixing Socket outlet multipurpose, 2 in 1, 5 pin, 5/6 Amps, flush type, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch piano flush type, single pole, one way, 5/6 Amps ISI mark, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling rose surface type polycarbonate, isolated body two to three terinal,, tpline series 20 x 50mm, 6 Amps, three terminal, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.

Supply and fixing MCB SPN 32 Amps, 10 KA 'B' curve 240 V AC, 50 Hz including necessary attachment, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SP suitable for 230 volts AC supply 6 to 40 Amps, SP rupturing capacity not less than 10KA, B Curve ISI Marked complete all as specified and as directed by Engineer-in-Charge.

M& L self ballast LED retrofit Lamp with PVC holder and PC Diffuser 9 watt 230 Volt 6500K Complete all as directed.

S&F new generation energy saving ,wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED power factor > 0.95, 100 lumen/watt duly fitted on pvc square block 5700K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete power factor > 0.95, 100 lumen/watt, CCT min 5700K complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means of GI bolts/nuts/washers and including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in earthing pit including necessary form work, excavation & earth work, all as specified & shown in electrical plate No. 3 of SSR (Part – I) complete all as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner.

Supply and fixing of exhaust fan stainless steel body 300 mm sweep (BEE, 5 star rated) with louvres, 230V, single phase AC supply, hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface as per existing surfaces, and connection to fan with suitable flexible twin core round copper wire complete all as specified and directed by Engineer-in-Charge. Note :- (i) Srl Number of exhaust fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Exhaust fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account

Supply, laying and testing cable for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 core cable from pole to bldg all as specified and directed..

Making holes for 300 mm dia exhaust fan of suitable shape & size into or through brick walls at ground/First/second floor including plastering for making good to the original surfaces of any description disturbed including painting/distemper matching with the existing colour. Note :- Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site.

M K Enterprises

M/s Vandana Builders

NAIB ENTERPRISES

K L JINDAL AND CO.

B D BATRA AND SONS

P K BANSAL CONTRACTOR

Lovneesh Jindal Contractor

NAV NIRMAN BUILDER

LM CONSTRUCTIONS

VISHAV CONSTRUCTIONS