Tender for prov. SOP to HPCL at M/s Brar Filling Station by prov.additional 11 KVHT line due to change in R.O.W on Partial turnkey basis under ESD HPSEBL Barsar. (ED Barsar)

HT LINE : ACSR 6/1/3.35(50mm²) conductor {Includes 3 conductor lengths for 3Φ and additional 1% (Sag, Jumpering and wastage}

11 Mtr. Long ISI marked, Swaged Steel Tubular poles as per IS:2713/1980 (Part-I-III) as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-32.

RCC Muff 2000mm Long with concrete filling material

Ms Channel Iron (Horizontal)- MS Channel Iron: 100x50x5, Length 1270mm .

MSAI for single pole str of Size 750x50X50x6mm each ( 2 Nos per str. )

Pole Top Bracket - made of MS Channel Iron : 100x50x6, - 100mm

11 kV Pin Insulators (Porcelain 12 kV, 10 KN) with GI Pin (3Nos. Per Pole Structure)

Discs insulator sets (comprising 1 No. Disc: (Porcelain Disc Insulator BS, 12 kV, 90 kN) including Ball Cleave, Bend Stapple, Dead End Clamps etc.)

MSAI.Belt Set Size (1800x50x50x6 mm) for Double Pole str. (2Nos per Set)

MSAI X-Bracing Set for double pole str of Size 2125x50X50x6mm each ( 2 Nos per set ).

X-Arm (Horizontal)-MS Channel Iron C type of Size 100X50x5mm Length:2340mm x 2nos.

HT Stay Set Complete i/c Guy Assembly and Helically fittings)

Stay wire 7/3.15 mm@ 9.00 kG per stay set

HT Pipe Earthing Set complete in all respect.

Continous Earth wire (GI, 8 SWG) {alongwith 1 wire lengths for avg.one road crossing @ 20 m and Additional 1% (Sag and wastage)} including Cross Lacings (GI, 8 SWG) [ 2.2 m x 9 Nos @ 2 m spacing] at road crossings {0.102 kg/m}

Eye Hook for Earth wire

MSAI.of Size (50x50x6 mm) :2800mm for Road crossing

Half Clamp made of M.S. Flat of size(50 x 6mm).

Full Clamp made of M.S. Flat of size(50 x 6mm).

Danger Plate (250X200X1.6 mm)

M.S.Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm² or more (with flat and spring washers)]

Barbed Wire

Red Oxide

Aluminium Paint

ERECTION OF 11KV HT LINE : Erection of Single Pole Run through Structure with Steel Tubular Pole 11Mtr Long as per latest standard practices /specification of REC / HPSEBL : (including Digging of pit for poles, muffing of pole, drilling of holes in poles and X-arms ,fixing of insulators,X-arms, erection of poles, fixing of barbed wire,danger plate,filling of pit ramming and painting painting of structure with Redoxide Primer & then with Aluminium Paint etc.Complete in all respect.

Erection of Double Pole / Dead Pole Structure with Steel Tubular Pole 11Mtr Long as per latest standard practices /specification of REC / HPSEBL : (including Digging of pit for poles, muffing of pole, drilling of holes in poles and X-arms ,fixing of insulators,X-arms, erection of poles, fixing of barbed wire,danger plate,filling of pit ramming and painting painting of structure with Redoxide Primer & then with Aluminium Paint etc.Complete in all respect.

Erection of Stay Set (HT) as per latest standard practices /specification of REC / HPSEBL including Digging of pit (size0.9x0.7x1 .5 M),fixing of Stay Rod, filling and ramming of pit, nozzelling and tightening etc. complete in all respect.

Erection of HT Earthing Set as per latest standard practices /specification of REC / HPSEBLincluding digging of pit of size 1.80x 1.2 x1.2 Mtrs, fixing of HT Earth Set, refilling the same and prov. earthing connection complete in all respect.

Laying of Conductor, Stringing, Sagging of ACSR 6/35/3.35 (50mm²) and binding with Insulators (3 wires) and fixing of jumper.

Laying of Earth wire with GI Wire 8SWG , Stringing, Sagging of and binding with Insulators.

Erection Charges of fixing of Jumpers of 11Kv line as per latest standard practices /specification of REC / HPSEBL (Per Set).

Local Transportation Charges for the carriage material by road & through manual carriage to the site of work for 11KV HTLines. (Complete Job)

Labour Cess (@ 1% of the total amount of the supply, erection, testing & commissioning of 1Nos.,11KV HT Lines. etc. (for complete Job).