CONSTRUCTION OF 11 BUS STANDS AT RESIDENTIAL COMPLEXES IN JALANDHAR

Bus Stands at Residential Complexes (i) Hard Standing Area 18 ft x 16 ft. (ii) Iron Structure and support including material and vertical and horizontal support. (iii) Polycarbonate sheet. (iv) Painting.

Hard standing area 18 ft x 16 ft (a) Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, within all lead and lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all lead and lift. (b) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level : 1:4:8 (1 cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 20 mm nominal size derived from natural sources). (c) Providing and laying 60mm thick interlocking paver blocks (interlock tiles) M-35 grade, machine made rubber molded smooth finish by strong vibratory process or with hydraulic compaction machine and of approved size and design/ shape laid in ordinary grey color and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc.

Iron structure and support including material and vertical and horizontal support. Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per entire satisfaction (a) Pillar 10mm x 100 mm 14 gauge MS pipe 10 ft height including grouting 2 ft in ground supporting with 3 nos of 50mm x 25mm 14 gauge pipe as vertical support and 2 nos of horizontal supports. (b) Top structure of 50 mm x 25 mm (16 gauge) in half round shape for supporting polycarbonate sheet of 10 ft x 12 ft length supporting with three number of horizontal pipes of 50mm 25mm (16 gauge) and three nos of vertical support of 50 mm x 25 mm (16 gauge). (c) Top structure is supported with MS Pipe 50 mm x 50 mm 14 gauge of 12 ft length three numbers supported with 2 nos 60 mm x 60 mm 14 gauge pipes in horizontal to support the top polycarbonate sheet

Polycarbonate sheet. Providing and fixing polycarbonate sheet of white color 5 mm thickness 10 ft x 12 ft at top of the structure in half round position as roof of structure and 8 ft high and 10 ft width at back of the structure supporting with MS iron strip and 25 mm x 6 mm long self-drew screw.

Painting (a) Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc, complete. (b) Painting with synthetic enamel paint of approved brand to give an even shade (two or more coats on all steel work as per entire satisfaction)

FRIENDS ENGINEERS (BID ID -3194314)

Allied International (BID ID -3199820)