Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹2.8 LAdmitted-Finance NANDIRVITA SHAIKHPARA RANINAGAR MURSHIDABAD WEST BENGAL | RANINAGAR | MURSHIDABAD | WEST BENGAL | L1 | Admitted-Finance | ||
| 2 | L2₹3.0 L+₹12,800.24 (4.51%)Admitted-Finance | L2 | Admitted-Finance | ||
| 3 | L3₹3.0 L+₹14,219.33 (5.01%)Admitted-Finance | L3 | Admitted-Finance |
Tender Value
₹2.8 L
EMD Value
₹5,676
Closing Date
7 Oct 2026, 11:00 amClosed
Assistant Engineer, PWD, Malda SD-I
Abhirampur P.O.-Mokdumpur, Malda-732103
Providing,Sinking and Development of Deep Tube Well with new Submersible Pump Set for the office of the Superintending Engineer,PWD,Northern Electrical Circle,Malda under Malda Division, PWD.
2026_WBPWD_5076041_3
WBPWD/AEMSDI/MD/eNIT_17/26-27 (2nd Call)
Open Tender
CIVIL WORKS
Percentage
20 days
Mangalbari
Please refer Tender documents.
5 documents required · 5 mandatory
₹5,676
Yes
13 Oct 2026
30 Sept 2026
9 Oct 2026
30 Sept 2026
7 Oct 2026
30 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
All types of soil
350 mm dia | 70 | Mtr. | 707.75 | ₹49,542.5 |
| 2 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
100 mm nominal size dia | 12 | Mtr. | 672.3 | ₹8,067.6 |
| 3 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
150 mm nominal size dia | 30 | Mtr. | 793.25 | ₹23,797.5 |
| 4 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
100 mm nominal size dia | 24 | Mtr. | 686.55 | ₹16,477.2 |
| 5 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineerin-charge. | 2.26 | Cum. | 1,538.25 | ₹3,476.44 |
| 6 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineerin-charge. | 1.59 | Cum. | 1,538.25 | ₹2,445.82 |
| 7 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
100 mm nominal size dia | 24 | hr. | 1,085.05 | ₹26,041.2 |
| 8 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of
100 MM dia | 1 | Each | 224.1 | ₹224.1 |
| 9 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
100 MM dia Clamp | 1 | Each | 1,911.4 | ₹1,911.4 |
| 10 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
100 MM dia | 1 | Each | 265.1 | ₹265.1 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.17 MB
FORM2911.pdf
Tender Documents • 0.51 MB
BOQ_5168331.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .