Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹5.9 LAdmitted-Finance | -20.20% | ₹5.9 L | L1 | Admitted-Finance |
| 2 | L2₹6.1 LAdmitted-Finance | -17.77% | ₹6.1 L | L2 | Admitted-Finance |
Tender Value
₹7.4 L
EMD Value
₹14,740
Closing Date
15 Dec 2025, 6:00 pmClosed
ER VIJAY KUMAR
EXECUTIVE ENGINEER PWD (RnB) DIVISION SAMBA
Please refer to BOQ
2025_PWDJK_297400_4
58 of 2025-26 dated 05-12-2025
Open Tender
Civil Works
60 days
Samba
Please refer Tender documents.
3 documents required · 3 mandatory
₹600
EXECUTIVE ENGINEER PWD (RnB) DIVISION SAMBA
₹14,740
EXECUTIVE ENGINEER PWD (RnB) DIVISION SAMBA
6 Jan 2026
6 Dec 2025
16 Dec 2025
6 Dec 2025
15 Dec 2025
6 Dec 2025
10 Dec 2025
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) 1.01 - For fixed portion 1.02 Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)
Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)
Providing and fixing ACP sheet panelling 4.0 mm thick in partition / doors of approved quality as per the directions of Engineer-in-charge. Complete job.
Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Single rubber stopper
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm
Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete :
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
Providing and fixing of curtains ( 7' x 3'-6" ) as directed by engineer-in-charge.
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length, 15 mm nominal bore
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
Providing and fixing of PVC panelling including cutting, jointing, fixing etc complete job of good quality as directed by engineer-in-charge.
Providing and fixing of wooden pannel frames, wardrobe, wityh complete accessories nut bolts with finishing items, sunmica etc as directed by engineer-in-charge.
Engaging of Carpenter for various works at site as directed by engineer-in-charge.
Supplying and fixing of surface mounted 18/20 watt LED batten tube fitting 4 feet long including connections etc. as required of ISI make. Complete job as directed by engineer-in-charge.
Supplying and fixing of following sizes (oscillating type) wall mounting fan on wall with necessary connections 400 mm sweep wall mounting fan of Havells, Crompton or equivalent as directed by engineer-in-charge.
Supplying and fixing of ceiling fan with necessary connections 1200 mm sweep fan of Havells, Crompton or equivalent as directed by engineer-in-charge.
Providing and fitting of LED Bulbs (9W) of ISI make as directed by engineer-in-charge.
Supplying and fixing following piano type switch / socket on the existing box / cover including connections etc. as required.
5/6 Amp. Switch
15/16 Amp. Switch
3 Pin 5/6 Amp. Socket Outlet
6 Pin 15/16 Amp. Socket Outlet
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.61 MB
BOQ_963966.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid