Electrification of Household in PE UE habitations at Agra

Amount

SUPPLY OF ITEMS

8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification

Stone Pad (300x300x75mm)

Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm

Aerial Bunched XLPE Cable 1X25 (Ph) + 1X16 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm

LT XLPE cable 4x35 Sq mm

1x35 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.

ACSR Weasel Conductor

ACSR Rabbit Conductor -Jumpering Works

Aluminium binding wire - 6 SWG

11KV Fuse Set (Drop out)

11KV TPMO

25 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)

LT Distribution box polyester sheet moulding compound (SMC) for 25 kVA Distribution transformer with arrangement of suitable bus-bars & MCCB's as per scope of works of SBD

9 KV LA , 5 KA (Distribution Class)

Earthing Coil connected with Bentonite Powder

GI Flat 25X3 for Earthing

Earthing Arrangement of chemical pipe size of 80mm , 3000 mm.long

G.I. Barbed Wire

G.I. Wire No. 16 SWG for binding

G.I. Wire 6 SWG for Protective Guarding

G.I. Wire 8 SWG for protective Guarding and Earthings

11 KV Disc Fitting T & C type

11 KV Polymer Disc Insulators 45 KN T&C Type

11 KV Pin Insulator Polymer Type as per TS

Dead End clamp (Insulated)

End Cap for AB cable

Suspension clamps (Insulated)

Pole Clamps with with I-Hook for laying ABC

Insulating Piercing Connector (16-95 sq.mm)

Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts

PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral)

PG Clamp for Rabbit

GI Stay Wire 7/10 SWG

HT Guy Insulator

LT Guy Insulator

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09

HT Stay Clamp as per approved drawing-11 KV

LT Stay Clamp as per approved drawing

Pre-fabricated galvanised steel items (zinc 610gms/sqm), like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings,Tea off, guarding channels, back clamp, DT's Structure etc made of GS Channels , GS angle , GS flats (50x8mm) of given sizes for over head structures as per technical specification, approved drawings and scope of work.

GS Nuts, bolts and washers as per technical specification, approved drawings and scope of work.

Eye Bolt for Guarding

Jointing sleave -ACSR Weasel

11 KV Danger Board

11 KV Number Plate

Armoured Service Cable 2CX6 SQMM

ERECTION PART

Survey , Erection, Testing and commissioning of 11 Kv Line (Complete Work in all respect)

Route survey and pole spotting for 11 KV line

8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification

ACSR Weasel Conductor

Stone Pad (300x300x75mm)

Pre-fabricated galvanised steel items (zinc 610gms/sqm), like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings,Tea off, guarding channels, back clamp, DT's Structure etc made of GS Channels , GS angle , GS flats (50x8mm) of given sizes for over head structures as per technical specification, approved drawings and scope of work.

GS Nuts, bolts and washers as per technical specification, approved drawings and scope of work.

G.I. Wire 6 SWG for Protective Guarding

G.I. Wire 8 SWG for protective Guarding and Earthings

Eye Bolt

G.I. Wire No. 16 SWG for binding

Earthing Arrangement of chemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.

11 KV Pin Insulator Polymer Type as per TS

11 KV Polymer Disc Insulators 45 KN T&C Type

11 KV Disc Fitting T & C type

PG Clamp for Rabbit

Aluminium binding wire - 6 SWG

Jointing sleave -ACSR Weasel

11 KV Danger Board

G.I. Barbed Wire

Earthing Coil connected with nutbolt using Bentonite Powder

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09

HT Guy Insulator

GI Stay Wire 7/10 SWG

HT Stay Clamp as per approved drawing-11 KV

11 KV Number Plate

Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole) as per approved Drawing

Erection, Testing and commissioning of 11/0.433 KV three phase Transformer sub-station -25 KVA (Complete Work in all respect)

25 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)

8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification

Stone Pad (300x300x75mm)

Pre-fabricated galvanised steel items (zinc 610gms/sqm), like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings,Tea off, guarding channels, back clamp, DT's Structure etc made of GS Channels , GS angle , GS flats (50x8mm) of given sizes for over head structures as per technical specification, approved drawings and scope of work.

GS Nuts, bolts and washers as per technical specification, approved drawings and scope of work.

11 KV Polymer Disc Insulators 45 KN T&C Type

11 KV Disc Fitting T & C type

11 KV Pin Insulator Polymer Type as per TS

11KV TPMO

11KV Fuse Set (Drop out)

9 KV LA , 5 KA (Distribution Class)

LT Distribution box polyester sheet moulding compound (SMC) for 25 kVA Distribution transformer with arrangement of suitable bus-bars & MCCB's as per scope of works of SBD

LT XLPE cable 4x35 Sq mm

G.I. Barbed Wire

ACSR Rabbit Conductor -Jumpering Works

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09

HT Guy Insulator

GI Stay Wire 7/10 SWG

HT Stay Clamp as per approved drawing-11 KV

Earthing Arrangement of chemical pipe size of 80mm , 3000 mm.long and 8 SWG earthing wire etc.

GI Flat 25X3 for Earthing

Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole) as per approved Drawing

Erection, Testing and commissioning of New LT Line With AB Cable(Complete Work in all respect)

8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification

Stone Pad (300x300x75mm)

Aerial Bunched XLPE Cable 1X25 (Ph) + 1X16 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm

Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm

Pole Clamps with with I-Hook for laying ABC

Dead End clamp (Insulated)

Suspension clamps (Insulated)

End Cap for AB cable

PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral)

Insulating Piercing Connector (16-95 sq.mm)

1x35 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.

Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts

Earthing Coil connected with nutbolt using Bentonite Powder

Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle -1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09

LT Guy Insulator

GI Stay Wire 7/10 SWG

LT Stay Clamp as per approved drawing

Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole) as per approved Drawing

Erection of New Armoured Service cable with all required accessories like lugs ,GI Wire 10 SWG, Binding wre and Reel Insulator etc. (Complete Work in all respect) -25 Mtr average per consumer

Installation of Armoured Service Cable 2CX6 SQMM for Connections with all accessories

M/S ANURAG MISHRA CONTRACTOR & SUPPLIER

Ganpati Electricals Pvt Ltd