SPL REPAIRS TO BLDG NO NP58 AND NP60 ALLIED WORKS AT MED BTY AND PROVN OF 04 X GEYSER CAPACITY 25 LTR FOR BLDG NO NP89 SINGLE WOMEN OR LIVING ACCN OF NORTHERN COMD PROVOST UNIT UNDER GE SOUTH UDHAMPUR

Amount

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work in any description not otherwise specifically provided for all as directed.

Demolition of cement concrete floors and n exc 15cm thickness (below or above ground level ) all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework complete all as specified and as directed by Engr-in-charge.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement

M & L for 100mm thick PCC M-15 type B1 1:2:4 (20mm graded aggregate) nominal mix laid in alternate panels complete all as specified and as directed.

M & L for reinforced cement concrete (design mix) M-25 graded in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and as directed. Note : Liquid WPC will be measured and paid separately.

Rendering 20mm thick in CM 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished even and smooth without using extra cement

Material and labour for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Supply only water proofing compound (liquid),ISI marked complete all as specified and as directed.

M&L for pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.50 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and as directed.

M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.60mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or J hooks complete all as specified and as directed.

S & F Fe 410 W (Gde E 250 Quality A) Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and one shop coat of primer complete all as specified and as directed.

Preparation of new plastered surfaces of wall and applying two coats of cement based paint including over a coat of chalk whiting primer complete all as specified and as directed.

Preparation of new plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing Compound of Grade 'A' complete all as specified and as directed.

S & F Steel rolling shutters, 1.25mm thick laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle

S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S & F Ball bearing for rolling shutters complete all as specified and as directed.

Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting complete all as specified and as directed.

Preparation of old steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc flat fair finished complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over cut to length bent to shape required including welding with existing lintle band bars, cranking bending spirally for hooping ends and binding with and incl mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

M & L for providing precast cement concrete set in cement mortar 1:4 type B1 1:2:4 (20mm graded aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry) string courses, copings, kneelers, apex stones, pier caps, coluumns, posts, boundary pillars, bed plates, pinntle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets etc (of any section indicated) with plain fair faces including chamfers, weatherings, throating etc and setting in mortar complete with joints to match complete all as specified and as directed.

M & L for providing precast cement concrete set in cement mortar 1:4 tpe B0 1:2;4 (12.5mm graded aggregate) louvres and jallies, 50mm thick (measured solid) including all mouldings but excluding frame (Precast frame shall be measure separately and paid for) complete all as specified and as directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M & L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) including providing weep holes complete all as specified (PCC bond stone shall be measured and paid seperately) complete all as specified and as directed.

All as per Ser Item No 30 above but except stones complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought up to course, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40 mm for granite or trap stone complete all as specified and as directed.

M & L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete all as specified and as directed.

M & L for PCC type B0 1:2:4 (12.5mm graded aggregate) as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stop ends etc complete all as speicified and directed by Engr-in-Charge.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as directed.

Point wiring for one light/ fan/bell/Exhaust point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish. Make: Havells/ Finolex/ Polycab.

All as per srl item No 38 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.Make: Havells/ Finolex/ Polycab.

All as per srl item No 2 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.Make: Havells/ Finolex/ Polycab.

All as per Srl item No 38 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly.Make: Havells/ Finolex/ Polycab.

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge. Make:Legrand/ Havell crabtree/L &T/ Schneider

S &F Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge.

S&F Sheet metal enclosure double door type for DBs 8 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make: L&T/ C&S/CG/ Schenider/ Legrand.

S&F Sheet metal enclosure double door type for TPN MCB DBs 4 way 415 volts neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make: L&T/ C&S/CG/ Schenider/ Legrand.

S & F MCB Three Pole & Neutral capacity of 100 amps 415 volts rupturing capacity 16 KA complete all as specified and directed. Make: L&T/ C&S/CG/ Schenider/ Legrand.

S & F in replacement MCB single pole 240 volt any rating from 06 to 32 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable.Make: L&T/ C&S/CG/ Schenider/ Legrand.

S & F in replacement MCB single pole and neutral 240 volt any rating from 40 to 63 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable.Make: L&T/ C&S/CG/ Schenider/ Legrand.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified.(For TPN DB to SPN DB).Make: Havells/ Finolex/ Polycab.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 1.5 Sqmm in PVC concealed conduit 20mm dia including PVC insulated copper conductor cable 1.5 Sq mm as earth lead all as specified. (For street light ). Make: Havells/ Finolex/ Polycab.

Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.

Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.MAKE : Philips/Syska/Havells/Bajaj

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize.MAKE : Philips/Syska/Havells/Bajaj

S&F for batten angle lamp holder insulated body with back plate suitable for batten fittings including complete all as specified and as directed.MAKE : Philips/Syska/Havells/Bajaj

Supply and fixing LED lamp 9 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min)MAKE : Philips/Syska/Havells/Bajaj

Supply and fixing LED building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. MAKE : Philips/Syska/Havells/Bajaj

S&F Street light Bracket complete made of GI pipe of suitable size, medium grade 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall , all as specified and directed by Engg- in Charge.

Supply , Laying, Testing and commissioning cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables(heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm x 4 core size all as specified.Make: Havells/ Finolex/ Polycab.

S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified.

Excavation in trenches and exceeding 1.5m wide and not exc 1.5m in depth inany type of soil and getting out all as specified.

Returing, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick all as specified.

Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified.

Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles all as specified.

Supply and fix electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and as directed.

Point wiring for for 3 Pin 16 Amps socket outlet independent board 4.0 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 2.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.

S&F single pole and neutral enclosure surface mounted 240 voltswith 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of Make: Legrand/ Havells/ Anchor.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm FRLSH in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified & directed

S & F MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable Make:- Havells/ legrand/ Schneider.

S & F MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable Make:- Havells/ legrand/ Schneider.

Supply and fixing stop valve brass chromium plated screwed down for size 15mm pipe ISI marked complete all as specified and directed.

Supply and fixing PVC flexible connection graded suitable for hot water, 450mm long (Set of two) for inlet/outlet connections of geysers with heat resistance washers and nuts complete all as specified and directed.

Supply and Fixing Tubes,15mm 'Medium Grade' galvanised, with all fitting and fixed complete to walls and ceilingsor laid in floors complete all as specified and as directed.

Supply and fixing bib cock brass chromium plated screwed down for size 15mm dia GI pipe with chromium plated complete all as specified and directed.

M/S ASHOK KUMAR PACHIALA (BID ID -3348134)

VIRINDER SINGH (BID ID -3347746)

AKBAR FURNITURE HOUSE AND TIMBER MERCHANT (BID ID -3347979)

PARDEEP SHARMA (BID ID -3346273)

vmd traders (BID ID -3348139)

RAMAN CONSTRUCTION CO (BID ID -3347902)

M/s AKHIL SHARMA (BID ID -3347700)

KESAR CONST CO (BID ID -3348074)

khajuria builders (BID ID -3348340)

RAJ MOHD (BID ID -3347336)