AS AS TO COMMUNITY HALL AND MULTIPURPOSE HALL AT NAVY NAGAR UNDER AGE(I) NAVY CHENNAI

Amount

Taking down chowkhats with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean andnwashing down with water to removendust, etc.complete all as specified and directed.

M&L for Dark shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed

Taking down cement Plaster , any description, on brick walls or stone walls,etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for Brickwork with flyash old size half bricks thick wall, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured design tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM 1:4 etc complete all as specified and directed.

M&L for 20 mm thick machine cut,Granite stone slab (of any type)(table rubbed and polished) in steps,jambs, pillars, windows, cills, cooking plateforms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges & including cutting for the shape for SS Sink complete all as specified and directed

Ditto all as per item no-08 above but 15mm thick on skirting and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed

S&F stainless steel sink 1mm thick without drainage board for kitchen with plugs, washers and wastes coupling 40mm; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 600mm x 450 mm x 230 mm complete all as specified and directed by Engineer-in-Charge.

S&F for Aluminium powder coated frame for sliding three track windows of frame top & sides of size 92x31.75x1.50mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and ventilator 100x38x2mm thick louvers frame including joining cleat for fixing EPDM rubber/ neoprene gasket required with extruded built up standard sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom etc. complete all as specified and directed. Note : Thickness of powder coating not less than 50 micron.

S&F for Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. Note : Thickness of powder coating not less than 50 micron.

S&F for 125 mm size, Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed

S&F for 150 mm long CP decorative type Brass handles, cast type, polished bright handles fixed to plywood or frame complete all as specified and directed

S&F for 200 mm length Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed

S&F 100mm long Mortice lock with four levers (vertical type), Brass body and fixed complete all as specified and directed

S&F for aluminium wire cloth 0.45mm nomonal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed.

S&F for plain sheet glass, 4.00 mm thick, ordinary quality and glazing with oil putty in square exceeding 0.5sqm in each complete all as specified and as directed

S&F for brass bracket/holders suitable for drapery 28mm dia rods of Allishan-Ivory pearl interior series or equivalent as specified in PS complete all as specified and as directed

S&F for 28 mm dia aluminium powder coated tubular drapery rod with and including side ball finials, matching rings made from high grade ABS plastics complete all as specified and as directed. Make:- Allishan-Ivory pearl interior series or equivalent as specified in PS

S&F for plain sheet glass, 5.5mm thick, ordinary quality and glazing with Aluminium clip in square exceeding 0.5sqm in each complete all as specified and as directed

Demolition of cement Concrete (unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed.

M&L for 75mm thick PCC (1:2:4) type B-1 (20 mm graded aggregate) as in flooring and finshing the even and fair with out using extra cement etc etc complete all as specified and directed.

M&L for Chequered cement concrete/ parking tiles with glossey finished 20cm x 20cm x 25mm / 30cmx 30cmx 8 to 10 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed

S & F Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg fixed in repairs complete all as specified and directed

S&F for 18/19 mm thick marine plywood fixed with nails/ screws to frame works as in cabinets cupboards with SS angles cleats etc complete all as specified and as directed.

S&F for 9 mm thick marine plywood fixed with nails/ screws to frame works as in cabinets cupboards with SS angles cleats etc complete all as specified and as directed.

S&F for white laminates of 0.9mm thick glossy finish colour and pattern as approved adhesive complete all as specified and directed

S&F for decorative laminates of 1mm thick glossy finish, colour and pattern as approved adhesive complete all as specified and directed

S&F for 6mm thick mirror fixed to wall complete all as specified and directed

M&L for 1st class HW Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 but n exc 25 Sqcm complete all as specified and directed

S&F for CP decorative type Brass handles, cast type, polished bright handles 75mm long fixed to plywood or frame complete all as specified and directed

S&F for magnetic and connected plate to shutter and frame as per sample complete all as specified and directed

S&F for telescopic channel of size 450mm to 560mm of load per 45 kg/cmsq as per sample

S&F for 80mm Auto SS hinges of crank 0 degree to 90degree, fixed with screws to plywood or frame work as per sample approved by EIC complete all as specified and directed

D Subramani and Sons

S.T.S.CONSTRUCTIONS AGENCIES