8503 REPAIRS TO STEEL AND WOODEN FURNITURE AT 7N DET UNDER GE TIRUNELVELI

Amount

Sch 'A' Part I Steel Furniture CHARPOY GI PIPE WITH PLY TOP , IP (FD-220)

Removing existing newar from Galvanized iron Charpoy and supply & fix 12mm thick plywood of size 2.0 Mtr x 0.91 Mtr. The edges of plywood shall be fixed with teak wood beeding all around and plywood shall be fixed with 75 mm long mild steel round headed bolt and nut with washers of 10 Nos Including providing 03 Nos of mild steel flat iron siffeners made out of 40 x 3mm of length not less than 0.91mm each and 04 Nos of mild steel flat iron siffeners made out of 40 x 3 mm of length 0.30 mm in all the four coruers and welded to GI pipe frame and painting the stiffener with 02 coat of synthetic enamel black paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge.

Chair CB steel with arm (FD-75(M)

Removing the existing u/s wooden seat frame and replace with new seat frame made out of 2nd class hard wood 40 x 25 mm (TS) duly drilled and painted with two coat of Synthetic enamel paint black color. The frames are to be fixed to the tubular conduit frame, using steel screw and including provision of 04 Nos PVC shoes of approved quality.

Removing the existing u/s wooden back frame and supply and fix new back frame made out of 1st class hard wood 40 x 25 mm (TS) duly drilled and painted with two coat of Synthetic enamel paint black color. The frames are to be fixed to the tubular conduit frame, using steel screw and including provision of 02 Nos PVC caps of top end of MS pipe fram of approved quality.

Removing the existing u/s broken arm rest wooden of chair supply and fix new well seasoned 1st class hard wood arm rest of size 400 x 50x20mmmade to shape and painted with two coat of synthetic enameled paint , fixed with steels screwed from the bottom of the tubular frame all as speecified and shown in drg.

Removing the old rusted flat iron support at bottom and back of seat and replacing with new flat iron 20x3mm , 500mm long 02 Nos each at bottom and back having machine drilled hole at ends including insetting MS screws of 30mm since including fixing of Flat iron support to the steel frame by welding as shown in drg .

Preparation of old painted steel surface of chair CB steel with arm and applying one coat of olive green synthetic enamel paint.

Table office clerk steel(FD-250)

Removing the existing worn out U/S table top replacing with 18mm thick particle board BWR grade of size 1200x600mm as are directed and shown on drg.

Removing the existing U/S locks and supply and fix new lock 50mm size with duplicate key of godrage/equivalent to godrej make suitable for drawers .

Preparation of old painted steel surface and applying one coats of synthetic enamel paint internally and externally for table office clk steel .

Repair of steel table drawers by denting /welding etc to fix suitably in the channels all as directed by Engr-in-C.

Supply and fix new hard rubber toes (Set of 04 Nos) to the legs for table office clk steel .

Table offce Officer (FD-1003)

Removing the existing worn out U/S table top replacing with 18 mm thick particle board BWR grade of size 1350x750mm as are directed and shown on drg.

Removing the existing U/S locks and supply and fix new lock 50mm size (Set of 04 Nos) with duplicate key of godrage/equivalent to godraje make suitable for drawers .

Preparation of old painted steel surface and applying one coats of synthetic enamel paint internally and externally for table office clk steel .

Repair of steel table drawers by denting /welding etc to fix suitably in the channels all as directed by Engr-in-C.

Supply and fix new hard rubber toes (Set of 04 Nos) to the legs for table office officer .

Almirah large/ med with shelves (FD-67M).

Removing the existing U/S lock, supply and fix new lock (ISI Marked) along with suitable three way lock of 55/65mm with brass lever with two key chromium plated for Almirah large with shelves steel .

All as per item No 5.1 above , but for almirah medium with shelves steel .

Removing the existing U/S handle, supply & fix new steel chromium plated handle 125mm long to the steel almirah large/med

Preparation of old painted steel surface of Almirah large with shelves and spray painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

All as per item No ser No 5.4 but for almirah medium with shelves steel.

CHAIR EXECUTIVE REVOLVING (TP)

Removing of unserviceable seat of exiting TP chair S & F best quality moulded seat cushions (make- Godrej)if suitable size & material to existing chair as per existing shape and size all as directed by GE/BSO including dismanteling.

All as per items No 6.1 above but moulded back cushions (make- Godrej)

Removing of unserviceable base of exiting TP chair M& L for provision of new base (make- Godrej) of best quality (ISI Marked) as per existing shape and size all as directed by Engir-in-Charge and including dismantling.

Removing of unserviceable cloth of exiting TP chair M& L for provision of new tepestry cloth as in seat / back cushion covers as per existing shape / size all as directed by Engir-in-Charge incuding dismantling (Cost of tapestry cloth provided shall not be less than 275/- RM)

Removing of unserviceable arms of exiting TP chair Supply and fix new arms (make- Godrej) (Set of 02 Nos) in each chair of 1st quality as per existing shape and for chair executive revolving and as directed by Engir-in-Charge including dismanelting.

Removing of unserviceable Hydravilc systems of exiting TP chair Supply and fix new Hydravlic systems (make- Godrej) best quality (ISI Marked) as per existing of chair executive revolving low back / high back and size as directed by Engir-in-Charge including dismanteling.

Chair visitor (Make Godrej)

Removing of unserviceable seat of exiting TP chair Supply and fix new seat (make : Godrej)as per existing shape and size all as directed by GE/BSO including

All as per items No 7.1 above but moulded back cushions (make : Godrej)

Removing of unserviceable arms of exiting TP chair Supply and fix new arms (Set of 02 Nos)(make : Godrej) in each chair of 1st quality of as per existing shape for chair and as directed by Engir-in-Charge including dismanelting

Removing of unserviceable frame of exiting TP chair Supply and fix new frame (make : Godrej) for chair visitor

Chair computer (FD/E6/MAP/01)

S & F best quality moulded seat cushions duly covered with new tepostry cloth as per existing shape and size all as directed by BSO including dismanteling and removing the old unserviceable seat cushions.

All as per items No 8.1 above but moulded back cushions

M & L for provision of new base of best quality (ISI Marked) as per existing shape and size all as directed by Engir-in-Charge and including dismantling & removing the old unserviceable base.

Supply and fix new PU arms (Set of 02 Nos) in each chair of 1st quality as per existing shape for chair and as directed by Engir-in-Charge including dismanelting and removing the old unserviceable arms

Supply and fix new Hydravlic systems best quality (ISI Marked) as per existing of chair computer and size as directed by Engir-in-Charge including dismanteling & removing the old unserviceable material

LOCKER BEDSIDE STEEL (FD-1029/257)

Removing the existing U/S Piano hinges, supply & fix new Piano hinges steel 30 x 780mm long fixed with required screws to the locker bedside steel.

Removing the existing U/S handle, supply & fix new Aluminium 'D' handle 100mm long with screw & washer to the locker bedside steel..

Removing the existing U/S Hasp & Staple, supply & fix new Aluminium Hasp & Staple 75mm with screw to the locker bedside steel.

Removing the existing U/S Rail, supply & fix new Aluminium rail 18mm dia 300mm long with both socket fixed with screw all as directed to the locker bedside steel.

Preparation of old painted steel surface of locker bed side steel with shelves and spray painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

RACK ADJUSTABLE STEEL 6 TIER (FD-1038):- Preparation of old painted steel surface of rack adjustabe steel with shelves and spray painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

RACK SIDE WITH TRAY STEEL (FD-1023):- Preparation of old painted steel surface of rack side with tray steel spray painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

STOOL STEEL (FD-409) Preparation of old painted steel surface of Stool steel painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

CHAIR EASY WITH CUSHION STEEL (FD-358)

Removal of old unserviceable seat cushion of sofa set and providing new seat and back cushion of 40 dencity foam 100mm thick covered with long cloth and shall be tapestry cover of quality not less than Rs. 380 per mtr as specified in drg and approved by GE/BSO

Preparation of old painted steel surface of Chair easy with cushion steel painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

TABLE DINING ORS ALUMINIUM TOP(FD-165)

Removing existing unserviceable table top from table dining ORs and replacing with new 19 mm particle board of BWR grade having dimensions 1900 x 685 mm as per specification.

Preparation of old painted steel surface and applying one coats of synthetic enamel paint internally and externally for Table dining Ors.

Supply and fix new hard rubber toes (Set of 04 Nos) to the legs for Table dining Ors .

BOOK CASE STEEL(FD-1028)

Removing the existing U/S locks and supply and fix new lock with duplicate key of godrage/equivalent to godrej make suitable for book case steel .

Preparation of old painted steel surface and applying one coats of synthetic enamel paint internally and externally for Book case steel .

Removing the existing U/S glass door and supply and fix new glass door as are directed and shown on drg.

Repair of Book case steel by denting /welding etc to fix suitably in the channels all as directed by Engr-in-C.

Sch A Part II-Wooden furniture Recanning of chairs(FD-17(M),FD-20(M),FD-16(M),FD-3(M) & FD-27(M)) Removing the unserviceable / wornout cane plastic and re-canning the chairs of chair Chair Easy, Chair Writing, Chair dining, chair D’ Man and stool dressing, with 2 mm plastic cane in centre and beading with 4 mm of white plastic cane superior quality including supply of plastic canes all as specified and shown on drawings.

Table dining 1200x900mm (FD-291)

Removing the existing U/S top and replacing with new table top 1200 x 900 mm, made of 19 mm one side teak veneered particle board with 3 mm thick TW beading all around .

Removal of existing U/S legs replacing with new legs made out 1st class hard wood (Teak wood) 60 x60 mm at top 40 x40 mm at bottom 760mm long including providing hard rubber ring screwed. With 3 mm thick TW bearing all around all as directed and shown on drg.

Removing the existing damaged braces (Side Rails) on the longer side replace with new 1st class hard wood(TW) size 25 x 100 x 1420mm All as directed and shown on drg.

Removing the existing damaged braces ( shorter rails) on the shorter side replace with new 1st class hard wood (TW) of size 25 x100x 640 mm all as directed on shown on drg .

TABLE 3'x 2' WITH / WITHOUT DRAWER (FD-224)

Removing the existing U/S top and replacing with new table top 900 x 600 mm, made of 19 mm one side teak veneered particle board with 3 mm thick TW beading duly polished all around .

Removal of existing U/S legs replacing with new legs made out 1st class hard wood (Teak wood) 60 x60 mm at top 40 x40 mm at bottom 760mm long including providing hard rubber ring screwed all around all as directed and shown on drg.

Removing the existing damaged braces (Side Rails) on the longer side replace with new 1st class hard wood(TW) size 25 x 100 x 1420mm All as directed and shown on drg.

Removing the existing damaged braces ( shorter rails) on the shorter side replace with new 1st class hard wood (TW) of size 25 x100x 640 mm all as directed on shown on drg .

Table writing (FD-249 and FD-275)

Removing the unserviceable top of table writing and supply and fix new top made out of 18 mm thick prelaminated particle board one side teak veneered and other side white in colour of size 1145x600 mm with 4mm thick teak wood edging all around as shown drg and as directed .

Removing the unserviceable top drawer of table writing and supply and fix new drawer of size 490x370x100 mm made out of sides with 6 mm thick plywood and bottom with 12mm thick teak wood plank as shown in drg as directed .

Removing the unserviceable bottom shutter of table writing and supply and fix new bottom shutter of size 370x470 made out of 18 mm thick prelaminated particle board with 4mm thick teak wood edging around including all fitting & fixtures as shown in drg and as directed .

Removing the unserviceable stiffener of table writing and supply and fix stiffener of size 50x25x1145mm made out of TW as shown in drg duly polished with French polish to give a glossy appearance all as specified.

Removing the unserviceable leg of table writing and supply and fix new leg of size 55x35x760mm made out of TW duly grooved 5 mm x 5mm in top as shown drg duly polished with French polish to give glossy appearance all as specified and as directed .

Removing the unserviceable plywood of back drawer and supply and fix new plywood 6mm thick of size 410x610mm as shown in drg and as directed .

Removing the unserviceable side portion of drawer and supply and fix new side portion made out of 18 mm thick ply wood one side thick veneered and other side commercial of size 610x560mm with 4mm thick TW beading al around as shown in drg duly French polished over TW edging .

Chair dining (FD-228, FD-279 & FD/E6/MAP-II/04)

Removing the existing unserviceable rear leg from chair Dining and Supply and Fix new Teak wood Rear leg of size 35x50 mm made to shape as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable front leg from chair dining and supply fix new TW front leg of size 35x50 mm made to shape as shown on drg and as specified duly French polished to existing shade .

Removing the existing unserviceable side rail from chair dining and supply and fix new TW side rail of size 25x65 mm made to shape s shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable rear rail from chair dining and supply and fix new TW rear rail of size 25x65 mm made to shape shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable stiffner from chair dining and supply and fix new TW stiffner of size 20x25x430mm made to shape shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken top rest from chair dining and supply and fix new TW top rest of size 45x15x440mm made to shape of 45x35x440 mm as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Supply and fix nylon buffer (Set of 04 Nos) to the legs for chair dining .

Chair easy(FD-229 and FD-17)

Removing the existing unserviceable broken front leg from chair easy and supply and fix new TW front leg of size 55x25x490 mm made to shape shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken rear leg from chair easy and supply and fix new TW rear leg of size 55x20x490 mm made to shape shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken front rail from chair easy and supply and fix new TW front rail of size 55x25x510mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken rear rail from chair easy and supply and fix new TW rear rail of size 55x25x490mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken side frame from chair easy and supply and fix new TW side frame of size 70x40x545mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken arms from chair easy and supply and fix new TW arms of size 65x25x610mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken back rest from chair easy and supply and fix new TW back rest of size 480x510mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Supply and fix new hard rubber ring screwed (Set of 04 Nos) to the legs for chair easy .

Chair writing(FD-250 and FD-280)

Removing the existing unserviceable broken front leg from chair writing supply and fix new TW front leg of size 55x35x460mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken rear leg from chair writing and supply and fix new TW rear leg of size 55x30x890mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken front rail from chair writing and supply and fix new TW front rail of size 65x30x535mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken side rail from chair writing and supply and fix new TW side rail of size 65x30x470mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken back rest from chair writing and supply and fix new TW back rest of size 50x15x470 made out of 50x35x470mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken top back frame from chair writing and supply and fix new TW top back frame of size 50x15x535mm made out of 50x35x470mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken stiffener from chair writing and supply and fix new TW stiffener of size 20x25x535mm made to shape as per drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken arm rest from chair writing and supply and fix new TW arm rest of size 60x25x470mm made to shape as per drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Supply and fix new hard rubber ring screwed (Set of 04 Nos) to the legs for chair easy .

Sofa set (FD-373)(Single seater)

Removal of old unserviceable Seat cushion of sofa set and providing new 40 density foam 100mm thick covered with long cloth and shall be tapestry cover of quality not less than Rs. 375 per mtr as specified in drg and approved by GE

Removal of old unserviceable back cushion of sofa set and providing new 40 dencity foam 100mm thick covered with long cloth and shall be tapestry cover of quality not less than Rs. 375 per mtr as specified in drg and approved by GE/BSO.

Sofa set (FD-373)(Three seater)

Removal of old unserviceable Seat cushion of sofa set and providing new 40 density foam 100mm thick covered with long cloth and shall be tapestry cover of quality not less than Rs. 375 per mtr as specified in drg and approved by GE

Removal of old unserviceable back cushion of sofa set and providing new 40 dencity foam 100mm thick covered with long cloth and shall be tapestry cover of quality not less than Rs. 375 per mtr as specified in drg and approved by GE/BSO.

Sofa set (FD-373) (Five seater)

Removal of old unserviceable Seat cushion of sofa set and providing new 40 density foam 100mm thick covered with long cloth and shall be tapestry cover of quality not less than Rs. 375 per mtr as specified in drg and approved by GE

Removal of old unserviceable back cushion of sofa set and providing new 40 dencity foam 100mm thick covered with long cloth and shall be tapestry cover of quality not less than Rs. 375 per mtr as specified in drg and approved by GE/BSO.

TEAPOY WOODEN (FD-232)

Removing of unserviceable/broken top of Teapoy wooden duly polished and providing new top 18 mm thick prelaminated particle board teak shade exterior BWR grade with 3mm thick teak wood edging all round duly fixed all as specified directed and shown on drg.

Removing unserviceable broken legs and providing new legs made out of teak wood for teapoy wooden duly polished all as directed specified and as shown on drg.

Removing unserviceable broken side short rail and providing new side short rail made out of hard wood duly polished for teapoy wooden all as directed and specified on drg.

Removing unserviceable broken side long rail and providing new side short rail made out of hard wood for teapoy wooden all as directed and specified on drg.

Table dressing gents (FD-230)

Removing of unserviceable old defaced mirror unserviceable back ply wood of mirror frame of table dressing gents and providing new sheet glass electro copper plated mirror 5mm thick and new plywood commercial BWR grade 6mm thick ply for back side of mirror frame and fixing to table dressing gents including French polishing to frame to all as directed and specified and shown on drg.

Removing of unserviceable/chipped/old 18mm thick Pre laminated particle board of size 450 x 380 and fix new pre laminated particle board 18mm thick of size 450 x 380mm on the top of dressing table between the drawer as per shows on drg.

Repair of dressing table Gents drawers to fix suitably in the channels all as directed by Engineer-in-charge.

TABLE PEG (FD-277/236)

Removing of unserviceable/broken top of table peg and providing new top 18 mm thick pre laminated particle board teak shade duly polished and exterior grade with 3mm thick teak wood edging all round duly fixed all as specified directed and shown on drg.

Removing unserviceable broken legs and providing new legs made out of teak wood for table peg all as directed specified and as shown on drg.

Removing unserviceable broken side short rail and providing new side short rail made out of hard wood for table peg all as directed and specified on drg.

Removing unserviceable broken side long rail and providing new side long rail made out of hard wood for table peg all as directed and specified on drg.

TABLE BEDSIDE (FD/E6/MAP-II/15(R)

Removing unserviceable MS Handles and providing new MS Handles for Table bedside all as directed and specified on drg.

Removing unserviceable PVC Shoes and providing new PVC Shoes (Set of 04 Nos) for Table bedside all as directed and specified on drg.

Notice Board (FD - 99 & FD- 99 (R)

Removing of unserviceable/chipped/old 18mm thick Pre laminated particle board and fix new pre laminated particle board 18mm thick on the notice board as per shows on drg.

Removing the existing U/S glass and supply and fix new glass as are directed and shown on drg.

Removing of old unserviceable cloth cover and supply and fix new cloth cover as are directed and shown on drg.

POLISHING Preparation wooden surface with sand papers and applying two coat of French polish all as directed by Engineer-in-Charge for the following items.

Table 3x2 wooden with and without drawer (FD-283)

Chair dining (FD-228)

Chair writing (FD-250)

Chair easy (FD-229)

Sofa set (Single,two,three,four & Five Seater) (FD-258/234/281)

Table Peg (FD-277/236)

Table Bed side Map (FD/E6/MAP-II/15(R)

Table dressing gents (FD/E6/Map/16)

Notice Board (FD - 99 & FD- 99 (R ))

Table offce Officer (FD-1003)

Table offce clk steel (FD-250)

Table dining officer (TP)

Chair dining officer (TP)

REENA INDUSTRIES (BID ID -3496346)