ELECTRICAL WORK IN CONNECTION WITH "IMPROVEMENT OF SAFETY & RELIABILITY IN POWER SUPPLY DISTRIBUTION SYSTEM AT SBP SETTLEMENT".

A-ELECTRICAL WORK IN CONNECTION WITH "IMPROVEMENT OF SAFETY

Supply, fixing, testing & commissioning of Heat shrinkable outdoor type end termination jointing kit for 11KV(E) XLPE cable 3x50-70 sq mm.

Supply, fixing, testing & commissioning of Heat shrinkable indoor type end termination jointing kit for 11KV(E) XLPE cable 3x50-70 sq mm.

Supply, fixing, testing & commissioning of Heat shrinkable straight through type end termination jointing kit for 11KV(E) XLPE cable 3x50-70 sq mm. 1348799.7

Supply installation testing and commissioning of 11KV, 630A,21kA for 3 sec. Motorized SCADA Compatible VVVV type 4- way RMU 2437290.0

Supply installation testing and commissioning of 11KV, 630A,21kA for 3 sec. Motorized SCADA Compatible 6-way RMU

Supplying and laying of 160 mm dia DWC HDPE pipe ISI marked along with all 6 accessories like socket, bend, couplers etc. conforming to IS complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required

Laying of HT Cable through Trenchless method

Laying of single cable across road/track as per Rly appd drawing

Laying of Railway supplied cable in air/on wall/pole / Pipe/culvert/cable trench etc.

Supply& fixing of 150mm Dia GI Pipe

Construction of cable trench (0.45x0.45 mtr) with 3 inch RCC cover

Cutting of earth for construction of man hole/cable jointing space

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor level in all shapes and size in: cement mortar1:6 (1 cement:6 coarse sand)

12 mm cement plaster of mix in ratio 1:6 (1 cement:6 fine sand)

Providing of cement concrete 1:5:10 (1 cement:5 fine sand:10 graded stone aggregate 40 mm size)

Provision of RCC slab

Provision of plinth / Muffing with CC (1:2:4)

Provision of GI pipe Earthing as per Railway approved drawings.

Supply, fabrication & fixing of GI Flat

Supply and erection of fencing panels at substation

Supply and erection of fencing uprights.

Dismantling of existing poles (Dismantling of Rail/SST/RS Joist pole

SITC of danger board (11KV)

Supply, fabrication and erection of GI channel/Angle/nuts and bolts 1163306.7

Supply, erection, testing and commissioning of main distribution panel including copper bus bar, incomer 2x 800A MDO type ACB as bus coupler. Outgoing 8 nos 250A MCCB and 2 nos 100A MCCB with all accessories.