REPAIR, MAINT OF FLOORING, JOINERY, PLUMBING, SAINTARY FITTINGS, PERIODICAL SERVICES, MISC REPAIR WORKS IN PAO AND LEKHA NAGAR IN AGE BR-I AREA INCLUDING REPAIR, REPLACEMENT OF OLD CONVENTIONAL FTL TO LED LIGHT FITTINGS UNDER GE SAUGOR

Amount

Taking down chowkats or frames with shutters (without taking off shutter from frames) of any type not exc. 1.5 Sqm each and removing from site complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) of any type exc 1.5 Sqm but not exc 4 Sqm each and removing from site complete all as specified and directed

Taking down shutters of any description not exc 1 Sqm including removing from site complete all as specified and directed

Taking down shutters of any description exc 1 Sqm but not exc. 2 Sqm each including removing from site complete all as specified and directed

M&L for second class hardwood plain, solid, straight chowkhat and frames wrought framed rebated on the solid, rounded on the solid or chamfered put together with glue pinned at joints complete all as specified and directed

M&L for 35mm thick second class hardwood factory made glazed & skelton shutters open rebated and prepared to receive glass or gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads rebated for securiCg glass etc.size of members of shutters as specified in SSR Part - 1, Section 8, clause 8.20 ( a ) complete all as specified and directed

M&L for 30mm thick second class hardwood factory made glazed & skelton shutters open rebated and prepared to receive glass or gauge etc provided with stiles and rails as specified in SSR Part I edges of framing plain chamfered or rounded fitted with cut and mitred rebated for securing glass etc.size of members of shutters as per Clause 8.20 (b) of SSR Part-I complete all as specified and directed

S&F 30mm thick flush shutters, solid core construction with particle board core & plywood face panels, commercial type on both sides complete all as specified and directed

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F framed work such as grills, gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.

S&F mild steel bands,straps, supports or stays for rainwater pipes, soil/waste or vent pipes including bolts, if required, hold fast and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for prepration of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide on steel surface complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregates as in bed blocks for hold fast complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section, 200 mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

S&F extruded aluminium handles, fabricated type anodised, 150 mm size complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type,anodised 125 mm size complete all as specified and directed.

S&F mild steel butt hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooden/steel frames or chowkats complete all as specified and directed

S&F butt hinges 'medium weight', cold rolled mild steel 75 mm size complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet reinforced with mild steel square tube, in opening complete all as specified and directed.

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour sheet on back face complete all as specified and directed

S&F aluminium anodised sliding door bolt 250 mm long of extruded section cast aluminium alloy complete all as specified and directed

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repair for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs 18mm/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed.

S&F in repairs cup board shutters of 19mm thick prelaminated particle board, interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination with 5mm thick teak wood edging on one side, bottom and top and other side 10mm teak wood edging with rebate and leaping treated with french polish complete all as specified and as directed.

S&F continuous (piano ) hinge, mild steel bright finish or electro galvanized width of flap (when open) 30mm complete all as specified and directed.

S&F in repairs 6 mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work complete all as specified and directed.

S&F in repairs 40mm dia, brass polished, bright finished cupboard knobs fixed with nut, screw and washer as in repair etc complete all as specified and directed.

S&F 100mm long hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F in repairs ball catches magnet type , with striking plate including complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor including removal of dibries from site complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:6 brick work or stone surfaces finished even and smooth without using extra cement complete all as specified and directed.

M/L for preparation of new plastered surface of wall and applying Birla / J. K. wall care white putty 2 mm thick in two layers for levelling the surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistant wall primer complete all as specified and directed.

M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar (1:4) finished fair and even complete all as specified and directed.

M&L for applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer on newly plastered or unplastered wall surface including preparation of surfaces complete all as specified and directed. Make:- Asian ACE or equivalent.make as approved by GE

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed.

M&L for applying three coats of white wash on new plastered surface of ceiling surface including preparation of surface complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing) including removal of the rubbish off the premises complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregates) as in sub base of floor to receive tiles complete all as specified and directed.

M&L for non skid coloured ceramic 6 to 7mm thick floor tiles(square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade/colour of tiles laid over & including 15mm thick CM (1:6) screed bed or bedding layer complete all as specified and directed.

All as per Srl item No. 42 above but as in dado / skirting laid over and including 10mm thick rendering in CM 1:4 -ditto-

M&L for glazed ceramic coloured tiles of size 300mmx450mmx6 to 7mm thick as in vertical surfaces such as skirting, dado,etc set and jointed in neat cement slurry and pointed in in white or coloured cement to match the shade/colour of tiles laid over & including rendering 10mm thick in CM (1:4) as in backing coat complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade/colour of tiles laid over & including 15mm thick CM (1:6) screed bed or backing coat complete all as specified and directed.

All as per Srl item No. 45 above but as in dado / skirting laid over and including 10mm thick rendering in CM 1:4 compete all as specified and directed.

M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F galvanised mild steel water tubing, 'medium grade', ISI marked,15 mm bore galvanised with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections of 15mm bore complete all as specified and directed

S&F galvanised mild steel water tubing, 'medium grade', ISI marked, 20mm bore galvanised with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections of 20mm bore complete all as specified and directed

S&F 1000 ltr capacity of rotational moulded polyethyline water storage tank (Cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position incl S&F 20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings including PVC float valve 20mm dia including dismantling water tanks of capacity exc 500 ltrs but not exc 1000 ltrs complete all as specified and directed.

S&F 500 ltr capacity of rotational moulded polyethyline water storage tank (Cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position incl S&F 20mm dia GI Pipe medium grade washout pipe 450mm long with plug & 20mm dia GI pipe medium grade overflow pipe 600 mm long with fittings includingPVC float valve 20mm dia includig dismantling water tanks of capacity not exc 500 ltrs complete all as specified and directed.

S&F in repairs bib taps cast copper alloy with crutch or butterfly handle chromium plated, fancy type screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed

S&F in repair multi bib tap 2 in 1, cast copper alloy,chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pie or for brass ferrule of 15 mm bore complete all as specified and directed

S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed

S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed

S&F in repairs brass chromium plated sink mixer for mixing Hot & Cold water high pressure, screwed down for 15mm bore iron pipe complete all as specified and directed

S&F in repairs brass chromium plated 3 in1 wall mixer for mixing Hot & Cold water with arrangement of head shower and incuding hand shower, high pressure, screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repairs brass chromium plated WHB mixer for mixing Hot & Cold water high pressure, screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repairs chromium plated brass health faucet suitable for EWC including CP chord and brass nozzle and fixed to pipecomplete all as specified and directed.

S&F in repair toilet paper holder, box type of brass, chromium plated fixed to walls with chromium plated brass screws complete all as specified and directed.

S&F in repairs stainless steel perforated grating of 100 mm dia dome type complete all as specified and directed.

S&F in repair tubular towel rail 600 mm long of CP brass 'D' type fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete all as specified and directed

S&F in repairs vitreous China WHB white flat back size 550mmx400mm including S&F angle iron brackets, CP swan neck pillar tap fancy type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repairs vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including PCC bedding, connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified and directed

S&F in repairs vitreous China wash down water closet pan (pedastal pattern), coloured, with and including CP health faucet, coloured plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, ( excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe complete all as specified and directed

S&F in repairs 75 mm size brass chormium plated shower rose fancy type including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste pipe and waste coupling complete all as specified and as directed.

S&F in repairs stainless steel plate rack (utensil rack) of overall size (31"x24"x10") made of stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified and directed.

S&F in repairs peg (set of six) stainless steel 350 mm long fixed in repair complete all as specified and directed

M&L for 18mm to 20 mm thick Granite slab (table rubbed and -polished ), machine cut, for floors/ shelves, cooking platforms, window cills, corner of toilet etc laid over 18 to 20mm thick Cudappa stone slab and including 15mm thck in CM 1:4 cement screed and jointed witht grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing edges to be rounded including dismantling of old exisitng stone or flooring of any description & removing rubbish outside MoD land complete all as specified and directed.

M&L for rounding/ chamferring to edges of stone slabss one edge, such as in steps, cooking platform and other similar situations etc complete all as specified and directed.

S&F in repairs chromium plated pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F 15 mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms, fixed in repairs complete all as specified and directed

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed

S&F in repairs 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with suitable mild steel clamps complete all as specified and directed.

S&F in repairs 75mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with suitable mild steel clamps complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends with access door 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends 75 mm dia with access door complete all as specified and directed.

S&F in repairs PVC (SWR) 110 mm dia junction, single (single T/Y) equal or unequal provided with access door complete all as specified and directed.

S&F in repairs for 75 mm dia PVC ( SWR) nahani trap with grating including jointing with solvent complete all as specified and directed

S&F in repairs for 110 mm dia PVC ( SWR) nahani trap with grating including jointing with solvant complete all as specified and directed

S&F in repairs PVC connections 15mm dia and 450mm long with brass nuts complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed by Engr-in-charge..

S&F sheet glass 3 mm thick ordinary glass with oil putty in sqm not exceeding 0.50 Sqm in each pane complete all as specified and directed

S&F 3mm thick pin headed glass and glazing with oil putty in square nexc 0.5 sqm in each pane, complete all as specified and directed

Disconnecting existing PVC water tank of exc. 250 and not exc. 500 lit capacity , setting a side for repair , cleaning and removing all scale and dirts from tanks and from mouths of circulating pipes and hoisting if required reconnecting and refixing in position etc including writing of date of cleaning with synthetic enamel paint complete all as specified and directed.

Disconnecting existing water tank of exc.500 and not exc. 1000 lit capacity , setting a side for repair , cleaning and removing all scale and dirts from tanks and from mouths of circulating pipes and hoisting if required reconnecting and refixing in position etc including writing of date of cleaning with synthetic enamel paint complete all as specified and directed.

M&L for treatement for sunken portion as follows :- (A). Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (B) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement in the following sequence:- (a) M&L for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. (b) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion) etc. (c) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick on top. Note :-The quoted rate includes for (i) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(ii) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (iii) Horizontal flat area to be measured.

S&F in repairs 25 mm bore stainless steel pipe curtain rod including stainless steel brackets & decorative dome, suitable for door/widows curtain fitted to each end and fixed to wall incl. removal of existing rod and making good complete all as specified and directed

M&L for brick work with old size subclass 'B' old size bricks, straright or curved on plan exc 6m mean radius built in CM 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches, pillars etc built in cement mortar complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on brick work / concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.

Dismantling unframed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed.

S&F structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F mild steel for wind ties for roof including securing bolts, posts including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed

S&F MS plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & not exc 30cm long, dia of shank 16 to 20 mm complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed.

S&F 0.50 mm thick galvalume sheet profile pattern precoated coloured having tensile strength 550 Mpa as in roof covering, fixed with self driving screws including dismantling of old exisitng GI sheets complete all as specified and directed. Make:-TATA BLUE SCOPE (DURA SHINE)/JSW COLOURON+ or equivalent make as approved by GE

S&F 0.50 mm thick galvalume sheet precoated coloured Profile ridge ,fixed with self driving screws including dismantling of old exisitng GI ridge sheets complete all as specified and directed. Make:-TATA BLUE SCOPE (DURA SHINE)/JSW COLOURON+ or equivalent make as approved by GE

M&L for preparation of old decorated wall surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes, craks etc and applying one coat of white wash on old decorated surface of walls incl washing floors, cleaning glass, joinery, electric fitting etc complete all as specified and directed.

All as per Srl item No.105 above but two coats of white wash on walls -ditto-

All as per Srl item No.105 above but one coat of white wash on ceiling -ditto-

All as per Srl item No.105 above but two coat of white wash on ceiling surface -ditto-

M&L for preparation of old decorated wall surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes, craks etc and applying one coat of distemper oil emulsion on old decorated surface of walls incl washing floors, cleaning glass, joinery, electric fitting etc complete all as specified and directed.

All as per Srl item No.109 above but two coats of distemper oil emulsion -ditto-

M&L for preparation of old painted wood or wood based surface of any desription over 10 cm width or girth by removing all splashes, drops, dirt scrapping with sand paper etc and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per Srl item No. 111 above but two coats of synthetic enamel paint on wooden surfaces -ditto-

M&L for prepration of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per Srl item No. 113 above but two coats of synthetic enamel paint on steel surfaces -ditto-

M&L for complete removal of existing treatment from walls by scrapping & washing etc and applying Birla / J. K. wall care white putty 2 mm thick in two layers for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant wall primer complete all as specified and directed.

M&L for complete removal of existing treatment from wall by scrapping of surfaces of old decorated walls etc, properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls etc and applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. Make:- Asian ACE or equivalent make as approved by GE

M&L for prepration of old surface of RCC overhead tank including removal of bee nest, black marks, etc., of capacity 0.20-0.30 lakh gallon approx with around 18-23 metre staging and applying two coat ofexterior emulsion weather proof paint to entire overhead tank alongwith staging complete to entire satisfaction of Engineer-in-charge. Note : (i) The contractor must provide all the saftey precautions to the labourer's involved in the above work. (ii) The contractor must insured the labourer's involved in the above work (iii) The quoted rate shall deemed to be included for the safety measures as well as the insurance of the labourer's and no extra payment shall be done on this account

M&L for prepration of old surface of RCC overhead tank including removal of bee nest, black marks, etc., of capacity 0.50 lakh gallon approx with around 18-23 metre staging and applying two coat ofexterior emulsion weather proof paint to entire overhead tank alongwith staging complete to entire satisfaction of Engineer-in-charge. Note : (i) The contractor must provide all the saftey precautions to the labourer's involved in the above work. (ii) The contractor must insured the labourer's involved in the above work (iii) The quoted rate shall deemed to be included for the safety measures as well as the insurance of the labourer's and no extra payment shall be done on this account

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in mass concrete as in foundation filling and mass concrete complete all as specified and directed.

M&L for non skid coloured ceramic 6 to 7mm thick floor tiles(square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floors set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade/colour of tiles laid over & including 15mm thick CM (1:6) screed bed or bedding layer complete all as specified and directed.

M&L for 600mmx600mmx 8mm to10mm thick coloured vitrified tiles as in floors set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 600mmx600mmx 8mm to10mm thick coloured vitrified tiles in skirting, dado & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the tiles laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for PCC 1:2:4, type B0 ( using 12.5 mm graded stone aggregates ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and including all necessary form work complete all as specified and directed

M&L for complete removal of existing treatment on wall and prepration of old surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer complete all as specified and directed

M&L for applying one coats exterior weather coat including preparation of old decorated wall surfaces complete all as specified and directed Make:- Asian Ace or equivalent make as approved by GE

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F in repair PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed.

S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed.

S&F in repair 15mm bore chromium plated bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repair PTMT PVC grating dome type of 100 mm dia complete all as specified and directed..

S&F in repairs 110mm dia PVC(SWR) pipes single soketed in any length with adhesive joint fixed to floor or trenches including fittings complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors with fittings complete all as specified and directed.

S&F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed.

M&L for repair of existing aluminium door with taking down and refixing in same location including all necessary fitment for repair complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete including necessary wooden beading complete all as specified and directed.

S&F in repairs 150mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for applying three coats of white wash on new plastered surface of walls surface including preparation of surface complete all as specified and directed.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including S&F 8mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

M&L for the following point wiring with 1.5 Sqmm PVC insulated FRLS, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black and Earth – Green:-

For one light point or fan point controlled by one switch

For one Call Bell point controlled by one push button switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.142 here in before but for power point wiring using with 2.5 sqmm PVC FRLS insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead

M&L for the following with concealed point wiring with 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black and Earth – Green:-

For one light point or fan point controlled by one switch

For one Call Bell point controlled by one push button switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.144 here in before but for power point wiring using with 2.5 sqmm PVC FRLS insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead

S&F modular switch, one way,6 Amp 230, 1 module complete all as specified and directed.

S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed

S&F modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed

S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed

S&F modular fan step regulator 120 Watt -2 module complete all as specified and directed

S&F modular bell push 6A one module complete all as specified and directed

S&F switch piano type flush, single pole, one way 5 A, 230 V complete all as specified and directed

S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed.

S&F switch piano type flush, single pole, one way 15 A, 230 V complete all as specified and directed.

S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed.

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S & F in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed

S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed

S&F bell push flush type one way 5Amp 240 Volt complete all as specified and directed

M&L for concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge

M&L for surface conduit sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC casing -n-caping/pvc conduit of suitable size . ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge

S&F in replacement MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quoted rate

S&F in replacement double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quoted rate

S&F LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer including taking down existing FL fittings complete all as specified and directed. Make:- BAJAJ cat part No BIBWP10WLED /CG cat part No LBHE-10-CDL/Orient cat part No LIBHP-10-C.

S&F LED TL fitting 20 /18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient including taking down existing FL fittings complete all as specified and directed. Make:- Bajaj cat Part No BCLSB 20 WH/ CG Cat Part No LCTC-18-CDL/ORIENT Cat Part No LBLN-18-C-SQ/Halonix Cat Part No. HLB-33-20-CW-IP

S&F box type LED optic fitting 1x9 Watt 2 feet box type including taking down existing FL fittings complete all as specified and directed. Make:- Bajaj cat part No BCLSB10WH/ CG Cat part No LCTL-9-CDL/ORIENT Cat Part No LBLN-10-C-SQ/Halonix Cat Part No.HLB-07-10-CW-IP

S&F in replacement new laminated super hylem sheet of size 8" x 5" white colour 3mm thick of sizes including fixing of switches, sockets as per existing pattern complete all as specified and directed.

All as per Srl item No 170 above but of size 5"x5"

All as per Srl item No 170 above but of size 8"x10".

All as per Srl item No. 170 above but of size 8"x12".

All as per Srl item No. 170 above but of size 9"x11".

S&F in replacement PVC insulated and unsheathed single core multi stranded copper conductor 4 Sqmm (Nominal Area) drawn in existing conduit / batten / surface complete all as specified and directed.

All as per Srl item No. 175 above but size 6 Sqmm

S&F in replacement of conventional recess mounted fitting to LED 2' X 2' ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed. Make:-Orient cat Part No LTRHD-36-C/Bajaj cat Part No.BPSF 36W WH LED/Halonix Cat Part No.HLCR22-TO01-36-CW

S&F in replacement PVC conduit of size 20mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site complete all as specified and directed.

S&F in replacement PVC casing caping of size 1" x 1/2" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site complete all as specified and directed.

Pandey Construction and Engrs

M/S RAKESH TRADERS

M/s Vinod Kumar Korpal, Sagar

SAGAR MOTOR AND TRACTOR CO

M/S SHIVA TRADERS