CONSTRACTION OF COMMRICAIL COMPLEX IN TP OFFICE COMOUND AT TP GUTTAL

CONSTRACTION OF COMMRICAIL COMPLEX IN TP OFFICE COMOUND AT TP GUTTAL

Demolishing lime concrete manually/ by mechanical means and disposal of material to the appropriate disposal area as per direction of Engineerin-charge.(KPWD 2023-24,Vol-02,P.no-187,I.no-19.1)

Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1-6 (1 cement - 6 coarse sand) (KPWD-2023-24,Vol-02,P.no-9,I.no-5.4

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

Formwork-For Centering & Shuttering at50 Percent

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Formwork-Columns Above Plinth-For Centering & Shuttering at70 Percent

Steel Fabrication-Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/wel...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix -1-3 (1 cement- 3 fine sand) to brick masonry including rounding off orners wherever required smooth rendering, pr...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1-4 (1 cement- 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

In dado/skirting on 12 mm thick mortar 1-4 (1 acid proof cement - 4 coarse sand) with Acid and alkali resistant tile Colour glazed tile 30x45 cms 6mm thick with border of size 30 x 10 cms(Page No.60. ...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Finishing walls with textured exterior paint of required shade -New work (Two coats applied at 3.28 ltr/10 m²) over and including priming coat of exterior primer applied at 2.20kg/10 m² to give an e...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade -Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of appro...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 Percent) total coated thickness with zinc coating...

Concealed Conduite System- Supplying heavy gauge PVC conduit pipe......mmdia..........mm thick confirming to IS2509 with suitable sizebends,metal/PVC Junction boxes,adhesivepaste etc.,and running befo...

supplying and fixing PVC /metal conduit deep junction box. 32mm deep junction box(CSR-KPWD - Electrical SR, 2023-24 Page No.3, Item No. 1.5.3).

Extra for groove cutting in brick wall/CC wall/CC floor to the suitable depth of conduit/GI pipe and plastering, finishing upto wall surface complete Upto 50mm conduit in brick wall (CSR-KPWD - Electr...

Supplying and flush mounting power coated metal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting in bricks/ stone/c.c wall.6Way (CSR-KPWD...

Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring.(group A materials). With specified IS-69...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.-6 Amps One way Switch (CSR-KPWD - Electrical SR, 2023-24- Page No.9, Item No.3.6.1).

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.-32A DP Switch(CSR-KPWD - Electrical SR, 2023-24- Page No.9, Item No.3.6.9).

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.-6/16A Universal Socket-(CSR-KPWD - Electrical SR, 2023-24- Page No.9, Item No.3.6.10).

Supplying of ......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours & 70 Percent lumen maintenance with CRI 80. Power Input- 220-240V at 5...

Supplying of .......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours & 70 Percent lumen maintenance with CRI 80. Power Input- 220-240V at ...

Supplying,fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phase4 wire whole current class-1 Accuracy Energy Meter.(KPWD 2023-24,Vol-06,P.no-19,I.no-5.35)