Supply, Installation, Testing and Commissioning of Specialized Laboratory Furniture, Modular furniture in labs without fume hood including associated civil and electrical works in Academic Complex East (99C) and West (99B) at IIT Delhi

Amount

Lab Furniture Work

Supply and Installation of laboratory benches and worktop with accessories & specifications as stated in Particular Specification of the NIT. The complete work to be executed as per the approved layout plan. The quoted rates are inclusive of all the charges like freight, installation, testing and GST.

Base storage Cabinet Thicness of steel used in construction of cases shall be 1.2mm except as follows: a. Levelling bolt reinforcements 2 mm. b. Case and drawer suspension channels, 1.9mm. c. Top and intermediate front horizontal rails, apron rails, hinge reinforcements, and reinforcement gussets, 1.2mm. d. Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 0.8mm. Drawer Assemblies: e. Drawer bodies shall be made in one-piece construction including the bottom, two sides, back and front. They shall be fully coved at interior bottom on all four sides for easy cleaning. The top front of the inner drawer body shall be offset to interlock with the channel formation in drawer head providing a 3/4" thick drawer head. Epoxy Powder Coating. f. The thickness of the epoxy powder coating should be between 80 and 100 microns.

Base storage Cabinet -1 Drawer & 1 Shutter, Size = 457mm(L) x 550mm(D) x 762mm (H)

Base storage Cabinet -1 Drawer & 1 Shutter, Size = 457mm(L) x 550mm(D) x 914mm (H)

Base storage Cabinet -1 Drawer & 1 Shutter, Size = 610mm(L) x 550mm(D) x 762mm (H)

Base storage Cabinet -1 Drawer & 1 Shutter, Size = 610mm(L) x 550mm(D) x 914mm (H)

Base storage Cabinet -1 Drawer & 1 Shutter, Size = 762mm(L) x 550mm(D) x 762mm (H)

Base storage Cabinet -1 Drawer & 2 Shutter, Size = 762mm(L) x 550mm(D) x 762mm (H)

Base storage Cabinet -1 Drawer & 2 Shutter, Size = 762mm(L) x 550mm(D) x 914mm (H)

Base storage Cabinet -1 Drawer & 2 Shutters, Size = 914mm(L) x 550mm(D) x 914mm (H)

Base storage Cabinet -1 Shutter, Size = 350mm(L) x 550mm(D) x 762mm (H)

Base storage Cabinet -1 Shutter, Size = 350mm(L) x 550mm(D) x 914mm (H)

Base storage Cabinet -1 Shutter, Size = 380mm(L) x 550mm(D) x 914mm (H)

Base storage Cabinet -1 Shutter, Size = 457mm(L) x 550mm(D) x 762mm (H)

Base storage Cabinet -1 Shutter, Size = 457mm(L) x 550mm(D) x 914mm (H)

Base storage Cabinet -1 Shutter, Size = 610mm(L) x 550mm(D) x 762mm (H)

Base storage Cabinet -1 Shutter, Size = 610mm(L) x 550mm(D) x 914mm (H)

Base storage Cabinet -2 Shutter, Size = 457mm(L) x 550mm(D) x 914mm (H)

Base storage Cabinet -2 Shutter, Size = 762mm(L) x 550mm(D) x 914mm (H)

Base storage Cabinet -2 Shutters, Size = 750mm(L) x 550mm(D) x 914mm (H)

Base storage Cabinet Sink , Size = 762mm(L) x 550mm(D) x 914mm (H)

Base storage Cabinet Sink , Size = 900mm(L) x 550mm(D) x 914mm (H)

Base storage unit 1 Door 1 Shutter - 457(L) x 550(D) x 914(H)

Base storage unit 1 Door 1 Shutter - 610(L) x 550(D) x 914(H)

Base storage unit 2 Door 1 Drawer - 762(L) x 550(D) x 914(H)

Base unit Corner 1 Door Size = 355mm(L) x 550mm(D) x 762mm

Base unit Corner 1 Door Size = 355mm(L) x 550mm(D) x 914mm(H)

Base unit Corner Sink 1 Door Size = 355mm(L) x 550mm(D) x 762mm(H)

Base unit Corner Sink 1 Door Size = 355mm(L) x 550mm(D) x 914mm(H)

Base unit Sink 1 Shutter Size = 355mm(L) x 559mm(D) x 914mm(H)

Base unit Sink 2 Door- 762(L) x 550(D) x 914(H)

Wall Storage cabinet Gauges of steel used in construction of cases shall be 1.2mm except as follows: a. Levelling bolt reinforcements 2 mm. b. Case and drawer suspension channels, 1.9mm. c. Top and intermediate front horizontal rails, apron rails, hinge reinforcements, and reinforcement gussets, 1.2mm. d. Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 0.8mm. Epoxy Powder Coating. e. The thickness of the epoxy powder coating should be between 80 and 100 microns.

Wall storage Cabinet -2 Glass Shutter, Size = 1200mm(L) x 300mm(D) x 600mm (H)

Wall storage Cabinet -2 Glass Shutter, Size = 600mm(L) x 300mm(D) x 600mm (H)

Wall storage Cabinet -2 Glass Shutter, Size = 750mm(L) x 300mm(D) x 600mm (H)

Tall Storage Cabinet

Thickness of steel used in construction of cases shall be 1.2mm except as follows: a. Levelling bolt reinforcements 2 mm. b. Case and drawer suspension channels, 1.9mm. c. Top and intermediate front horizontal rails, apron rails, hinge reinforcements, and reinforcement gussets, 1.2mm. d. Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 0.8mm. Epoxy Powder Coating. e. The thickness of the epoxy powder coating should be between 80 and 100 microns.

Tall storage cabinet with Glazed door : 610(L) X 559(D) X 2100(H)

Tall Storage Cabinet with Glazed door, Size = 762mm(L) x 550mm(D) x 2100mm (H)

Tall storage unit With Lock: 900(L) X 550(D) X 2100(H)

Apron Storage unit

Apron storage cabinet : 610(L) X 559(D) X 2100(H)

Knee Space Knee space panels, where shown or specified, shall be 0.9mm thk, finished same as casework cabinets, and easily removable for access to mechanical service areas.

Knee Space Panel with Accessories - 610Lx00Dx762H

Knee Space Panel with Accessories - 610Lx00Dx908H

Knee Space Panel with Accessories - 750Lx00Dx908H

Knee Space Panel with Accessories - 762Lx00Dx762H

Knee Space Panel with Accessories - 762Lx00Dx908H

Knee Space Panel with Accessories - 900Lx00Dx762H

Knee Space Panel with Accessories - 914Lx00Dx762H

Knee Space Panel with Accessories - 914Lx00Dx908H

Knee Space Support

Reagent Racks Reagent racks are designed to be fix on top of worktop. It will have 300 mm/230mm Wide &900/mm600mm Height vertical Uprights made of 1.2mm thick CRCA. Each Reagent rack will have 300mm wide 10mm thick Glass shelves with shelf supports and will be designed to have 2 Tier at 300mm gap between each shelf. Electrical raceway will be fixed b/w the two uprights OR Each Upright will have provision for fixing 2 Nos. Sockets with switch and it will be located between the bottom shelf & the worktop. Each Shelves will have SS316 Retaining Rod all around.

2 Tier Reagent Rack Shelf 305x1050

2 Tier Reagent Rack Shelf 305x1093

2 Tier Reagent Rack Shelf 305x1160

2 Tier Reagent Rack Shelf 305x1170

2 Tier Reagent Rack Shelf 305x1200

2 Tier Reagent Rack Shelf 305x1250

2 Tier Reagent Rack Shelf 305x1274

2 Tier Reagent Rack Shelf 305x1420

2 Tier Reagent Rack Shelf 305x1474

2 Tier Reagent Rack Shelf 305x1500

2 Tier Reagent Rack Shelf 305x1520

2 Tier Reagent Rack Shelf 305x1550

2 Tier Reagent Rack Shelf 305x1575

2 Tier Reagent Rack Shelf 305x1600

2 Tier Reagent Rack Shelf 305x1630

2 Tier Reagent Rack Shelf 305x1700

2 Tier Reagent Rack Shelf 305x1729

2 Tier Reagent Rack Shelf 305x1800

2 Tier Reagent Rack Shelf 305x1900

2 Tier Reagent Rack Shelf 305x2000

2 Tier Reagent Rack Work Top 305x1050

2 Tier Reagent Rack Work Top 305x1093

2 Tier Reagent Rack Work Top 305x1160

2 Tier Reagent Rack Work Top 305x1170

2 Tier Reagent Rack Work Top 305x1200

2 Tier Reagent Rack Work Top 305x1250

2 Tier Reagent Rack Work Top 305x1274

2 Tier Reagent Rack Work Top 305x1420

2 Tier Reagent Rack Work Top 305x1474

2 Tier Reagent Rack Work Top 305x1500

2 Tier Reagent Rack Work Top 305x1520

2 Tier Reagent Rack Work Top 305x1550

2 Tier Reagent Rack Work Top 305x1575

2 Tier Reagent Rack Work Top 305x1600

2 Tier Reagent Rack Work Top 305x1630

2 Tier Reagent Rack Work Top 305x1700

2 Tier Reagent Rack Work Top 305x1729

2 Tier Reagent Rack Work Top 305x1800

2 Tier Reagent Rack Work Top 305x1900

2 Tier Reagent Rack Work Top 305x2000

Reagent Rack Support - 600H x 50D X 350L

Worktop

20 mm thick Jet Black Granite with Skirting. The worktops shall be 18/19mm Jet black Granite of an even surface and the level. Tolerance less than 1 mm. The front edge of the granite shall be chamfered at an angle of 28 deg and smoothened. The back splash for the wall bench shall be granite 18/19mm thick material for an height of 100mm from the finished table top level.

Rubber Base moulding

Base moulding and accessories

Corner clip and accessories

Side panel

Side, End, Rear & Support Panel with Acccessories

Sinks and accessories The sinks should be injection molded from Poly propylene co-polymer resin. Polypropylene to have very high resistance to attack from a wide range of chemicals and the ability to withstand temperatures up to 100 deg C. The impact resistance should be high which will minimize damage during and after installation. The sinks should be with self-draining base and should be suitable for mounting on top or underside of the work benches. The sinks should be compatible to a vast number of acids, alkalis and reagents. All gaskets and O-rings are made from Nitrile.

PP Sink Size : 600Lx400Dx450Hmm

PP Sink Size : 800Lx460Dx320Hmm

Waste, 1 1/2 BSP X 76mm.

Anti siphon bottle trap.

Reducing coupler in PP 51 X 31mm + PP Pipe lengths - 5mtr length - Dia 38mm upto nearest Drain

Acrylic Pegboard Board with 23 pegs with SS 316L Tray, 610L x 610mm(H) With 90 Degree bend tube upto sink

Bench Fittings

Bench fitting with 1 needle valve 90° for Vacuum Air

Bench Fitting with 1Needle Valve 90 Degree for Argon/H2/He/O2

Bench Fitting with 1Needle Valve 90 Degree for Compressed Air

Bench Fitting with 1Needle Valve 90 Degree for DM water

Bench Fitting with 1Needle Valve 90 Degree for Nitrogen

Bench Fitting with 1Needle Valve 90 Degree for portable water

Bench Fitting with 1Needle Valve 90 Degree for Potable Water

Bench mounted 3-way water fitting with 8" rigid/swing gooseneck with aerator for Potable water

Bench mounted 3-way water fitting with 8" rigid/swing gooseneck with aerator for Raw water

Wall Fitting with 1Needle Valve 90 Degree for Nitrogen

Canopy Size 457H x 900D x 900L, MOC PP/FRP (Colour:Grey, 10mm Thickness) Ceiling mounted type, Ceiling enclosure Access Door upto False Ceiling.

Eye wash

Eye Wash / Drench Hose - Providing and fixing emergency eye wash / Drench hose, table mounted with two gentle spray outlet heads with necessary accessories

Service Pendent

Service pendant with all its accessories with upto false ceiling - 350x150

Worktop support

Floor standing worktop support: 908Hx200L

Cross over Bench

SS 304 Cross Over Bench - Size ,1524L x 450D x 450H, with Shoe rack below

Sitting Height Finished Back with Sliding Door- 1250Lx25Dx750H

Anti Vibration Tabel

Anti Vibration Table size - 908(H) x 610(D) x 914(L) , Made up of 80mm x 80mm Tubular frame with 80mm Thk Granite top (300 x 500) & Phenolic top, Vibration Pads, Accuracy level up to 4Decimalpoints with covering panel. 18 electrical metal raceway with 2nos, 6/16A Electrical Sockets with Switch, 1Mtr Length cabling with plug top.

Anti Vibration Table size -750(H) x 610(D) x 914(L) , Made up of 80mm x 80mm Tubular frame with 80mm Thk Granite top (300 x 500) & Phenolic top, Vibration Pads, Accuracy level up to 4Decimalpoints with covering panel. 18 electrical metal raceway with 2nos, 6/16A Electrical Sockets with Switch, 1Mtr Length cabling with plug top.

Anti Vibration Table size - 750(H) x 600(D) x 750(L) , Made up of 80mm x 80mm Tubular frame with 80mm Thk Granite top (300 x 500) & Phenolic top, Vibration Pads, Accuracy level up to 4Decimalpoints with covering panel. 18 electrical metal raceway with 6nos, 6/16A Electrical Sockets with Switch, 1Mtr Length cabling with plug top.

Anti Vibration Table size - 900(H) x 600(D) x 750(L) , Made up of 80mm x 80mm Tubular frame with 80mm Thk Granite top (300 x 500) & Phenolic top, Vibration Pads, Accuracy level up to 4Decimalpoints with covering panel. 18 electrical metal raceway with 5nos, 6/16A Electrical Sockets with Switch, 1Mtr Length cabling with plug top.

Frame Table

H Frame with 20 mm Granite Worktop- 1828(L)x1219LX900(H)

H Frame with Worktop-1308(L)x1000LX900(H)

H Frame with Worktop-1550(L)x900DX900(H)

H Frame with Worktop-2050(L)x900DX900(H)

Moveable H Frame with Worktop- 1200(L)x1200DX762(H)-3 Side Barrier

Moveable H Frame with Worktop-600(L)x650DX908(H)-3 Side Barrier

Open Rack (Slotted angle Rack)

Slotted Angle open rack with 5 Shelves, Size - 750L x 550D x 2100H with 4 Side Metal Lipping.

Solvent unit

Classical door technology (door handle type ) for the storage of flammable liquids type testing by, MPA/TÜV SÜD according to DIN EN 14470-1, DIN EN 16121 and DIN EN 16122, EK5/AK4 09-10:2009 and AfPS GS 2014: 01 PAK mark of approval: GS/CE mark, high quality mark of approval by TÜV SÜD construction and colour:outer carcass sheet steel, RAL 7035 door sheet steel, RAL 1018 inner carcass of decor panels, RAL 7035 fittings and features: door closes automatically in case of fire door remains open in every position cylinder lock for safe access bottom tray sheet steel, RAL 7035 4 storage shelves sheet steel, RAL 7035 exhaust air connection socket on the cabinet roof visual inspection of the ventilation opening earthing connection on the cabinet roof interior fittings conductively connected with carcass adjustable foot for level adjustment set-back base, RAL 7015, Ninety minutes fire rated.

Solvent Store Cupboard , Size - 1194L x 612D x 2045H

Solvent Store Cupboard , Size - 894L x 612D x 2045H

Chemical Storage Cupboard

Supply and Installation of Tall storage cabinet of size 750W x 550D x 2100 H with Manual closing door, Equipped with a lockable, latching mechanism, CRCA, exterior phosphate coated with baked chemical resistant synthetic resin finish, with Glazed doors, approved quality hinge and operating hardware. Cabinet shall also have Adjustable levelling screws, galvanized steel shelves complete as per the detailed specification.

Tall unit swinging panel door with bottom louvers & Vent hole, Phenoloic resin liner inside, With 5nos. 16mm Thick phenolic shelves - 750L x 550D x 2100H

Tall unit swinging Glass door with bottom louvers & Vent hole, Phenolic resin liner inside, With 5nos. 16mm Thick phenolic shelves - 750L x 550D x 2100H

Floor Mounted Safety Station

Providing and fixing in position Floor mounted emergency safety station powder coated finish on galvanized pipe and fittings includes ABS plastic shower head operated by a rigid pull rod, easy grip handle, complete with an elbow, connecting pipe and ball valve. The combination eyewash with eyewash bowl, valve, fittings and accessories.

Floor mounted Safety Shower with Eye wash

Sitting bench with Shoe Rack below MOC as CRCA , Powder Coated Finish

SS 304 Cross Over Bench - Size ,1524L x 450D x 450H

Lab Chair & Stools

1. Lab chair constructed with foam or leather seat & Back rest with PU armrest. 2. Having chrome plated hydraulic height adjustable 3.Height adjustable from 700mm to 910mm 4. Having chrome plated 18” dia foot rest ring with chrome base, Castors wheels 6. Top seat dia 450mm

1. SS Lab stool constructed with stainless steel (SS304) Material. 2.Stainless steel (SS 304) Top seat 3.Having chrome plated hydraulic height adjustable 4.Height adjustable from 460mm to 680mm. 5. Having chrome plated 16” dia foot rest ring With chrome base, Castors wheels 6. Top seat dia 450mm

Civil Work

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge

Powder coated minimum thickness 50 micron aluminium

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete complying to ASTM C920, DIN 18540-F & ISO 11600.

Upto 5mm depth and 5 mm width

Upto 10 mm depth and 10 mm width

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum).

Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm.

Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two coats.

Providing and fixing roller blinds, the fabric should be screen openness of 5% and composition of 75% PVC and 25% polyester with fabric weight of 465 GSM having fire resistance grade of NSPA 701, BS 586 part- II with anodized aluminium channel weight, bracket and hangers etc complete. The fabric will be approved colour and shed of approved manufacturer complete. Make (VISTA/MAC/Marvel)

Providing and fixing self adhesive frosted/decorative/sun control film on glass partition, glass door and windows of approved design and make 3M / Garware or equivalent all complete as per direction of Engineer-in-charge.

Electrical Work

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

2 X 16 sq. mm + 1 X 6 sq. mm earth wire

4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

6 x 2.5 sq. mm

3 x 4 sq. mm

6 x 4 sq. mm

3 x 6 sq. mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A,30KA,FPMCCB

125 A,36KA,FPMCCB

200 A,36KA,FPMCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way , Double door

8 way , Double door

12 way , Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MOB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MOB TPDB is normally used where 3 phase outlets are required.)

4 way (4 + 12), Double door

8 way (4 + 24), Double door

12 way (4 + 36), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Triple pole

Supplying and fixing single pole blanking plate in the existing MOB DB complete etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

For 10 way, Double door SPN MCBDB

Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required.

Supplying, installing, testing and commissioning of following capacity TPN distribution tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with HRC fuses, interconnections, earthing etc. as required.

63 A TPN, 6 way

63 A TPN, 8 way

Supplying, installing, testing and commissioning of following capacity End Feed Unit made of 1.6mm thick sheet steel enclosure duly painted with powder coating to existing rising mains complete with TPN disconnector FSU and HRC fuses, mounting stands, cable end box, brass compression gland, connections, earthing etc. as required.

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Jointing copper! G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5X 35 sq. mm (32mm)

3.5 X 50 sq. mm (35mm)

3.5 X 70 sq. mm (38mm)

3.5 X 150 sq. mm (50mm)

4 X 16 sq. mm (28mm)

Providing and fixing DLP plastic trunking of size 105 mm x 50 mm on surface as reqd.[Make Legrand]

PVC trunking without cover of size 105 x 50 mm size

PVC trunking full cover of size 85 mm size

PVC trunking Left or right End cap

PVC trunking Internal angle adjustable from 80°-100°

PVC trunking External angle adjustable from 60°-120

PVC trunking 90°Flat angle

PVC trunking base/body joint

6/8 Modules clip on frame with finishing plate for 85 mm cover

Modular 16A/20 amps switch on the existing modular plate & switch box / channel including connection

Modular 6/16 amps multi socket on the existing moudular plate & switch box including connection.

Information data socket RJ45 with shutter with moudular plate

Telephone socket RJ11 with shutter with moudular plate

3 Modules clip on frame with finishing plate for 85 mm cover.

Supplying, installation DLP mini- trunking 32mm x 20mm with independent cover etc. complete as reqd.[Make Legrand]

PVC mini trunking with independent cover of size 32mm x 20mm size.

PVC mini trunking End cap left or right.

PVC mini trunking Internal/ External angle from 60°-120°

PVC mini trunking Flat angle from 85°-95°

PVC mini trunking Flat junction

supplying and laying and Fixing of PVC insulated, PVC sheathed XLPE aluminium conductor armored cable of Following size, 1.1 KV grade on wall surface as required.Upto 35 sq. mm (clamped with 1 mm thick saddle)Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm [conforming to I.S-1554/1/8].

4 X 16 sq. mm

3½ X 35 sq. mm

3½ X 50 sq. mm

3½ X 70 sq. mm

3½ X 150 sq. mm

Supply and installation of SS enclosure duly powder Coated paint for housing incomming MCCB 4P, of appropiate size with incomming and outgoing opening, suitable to accommodate upto 70sqmm, 3.5 core aluminium armoured cable,with louvers for heat dissipation and mounting hole for easy wall mounting. (matter: AC / Normal / Emergency Power) etc. as required

Supply and installation of SS enclosure duly powder Coated paint for housing incomming MCCB 4P, of appropiate size with incomming and outgoing opening, suitable to accommodate upto 300sqmm, 3.5 core aluminium armoured cable,with louvers for heat dissipation and mounting hole for easy wall mounting. (matter: AC / Normal / Emergency Power) etc. as required. (Make: L&T / Schneider / Legrand / Havells / C&S / Siemen / ABB)

Providing and fixing DLP plastic trunking of size 150 mm x 50 mm on surface as reqd.[Make Legrand]

DLP plastic trunking of size 150 mm x 50 mm without cover

PVC trunking full cover of size 85 mm size

PVC trunking full cover of size 40 mm size

Clip on Partition (Plastic)

PVC trunking Left or right End cap

PVC trunking Internal angle adjustable from 80°-100°

PVC trunking External angle adjustable from 60°-120°

PVC trunking 90°Flat angle

PVC trunking Cover joint

PVC trunking base/body joint

6/8 Modules clip on frame with finishing plate for 85 mm cover

1 Modules clip on frame with finishing plate for 40 mm cover

Modular 16A/20 amps switch on the existing modular plate & switch box / channel including connection

Modular 6/16 amps multi socket on the existing moudular plate & switch box including connection.

Supply, Making, Testing & commissioning of Advance maintenance free Chemical Gel Earthing of single pipe Technology( copper) of 3 mtr. long 50 mm dia fiiled with highly conducting metallic compound with the permanent sealings at the both the ends with the lead terminal 32x10mm at the top along with 50kgs of chemical gel for (mixture of sulphate, Silica, Alumina, Iron Oxide, Titanium Oxide, Magnesium Oxide, Sodium Oxide, Zinc Oxide etc. ) Resitance lowering grounding Minerals. The loss on ignition by mass of the chemical compound should be tested and certified by any International accredited and BIS ( Bureau of Indian Standard) accredited laboratory. The Chemical earth electrode manufacturer shall be an ISO 9001:2008 & ISO 14001:2001 certified organization. The Testing laboratory should be ISO 14001 certified. The JK CHEMRODE shall be duly tested & certified by CPRI ( Central Power Research Institute) Govt. of India for a minimum short circuit current of 30 KA rms. The Chemical Earth electrode manufacturer shall be an ISO 9001:2008 & ISO 14001:2004 certified organisation. along with Heavy duty polyplastic weather proof earth pit/ chamber.

Supplying and laying of PVC innersheathed, XLPE insulated copper conductor armored cable of Following size, 1.1 KV grade, in the existing RCC/ HUME/ METAL pipe as required. [conforming to I.S-7098(Part 1) 1988.

4 X 16 sq. mm

4 X 25 sq. mm

4 X 35 sq. mm

Supplying and laying of PVC innersheathed, XLPE insulated copper conductor armored cable of Following size, 1.1 KV grade, on wall surface as required.Upto 35 sq. mm (clamped with 1 mm thick saddle) [conforming to I.S-7098(Part 1) 1988.

4 X 16 sq. mm

4 X 35 sq. mm

Space Plus Design Labs Pvt. Ltd. (BID ID -3253460)

GD WALDNER INDIA PRIVATE LIMITED (BID ID -3253562)

LABINDIA INSTRUMENTS PVT LTD (BID ID -3248500)