rescue and safety equipment

Highimpact ABS Plastic High temperature thermoplastic fibre glass reinforced composite with EVA foam or EPS foam or PE foam 800 gm at Max 52 cm to 65 cm 06 to 11 drain holes for quick water escape Adjustable 3 or 4 point chin strap and quick release buckle Colour Orange Impact resistance Penetration resistance Saltwater & freshwater resistance Standard required EN 1385 2012 and NFPA1952

HEAVY DUTY WORKING GLOVES Material should be Doublelayered cowhide leather with Kevlar or aramid heat resistant inner lining and reinforced palm Application Suitable for handling and operation of cutting equipment such as RR Saw concrete cutter chain saw rescue lifting debris handling rope work and other rescue operations during field trials Grip Anti slip reinforced palm with vibration absorption padding for secure grip and reduced hand fatigue during operation Protection EN388 2016 Level 4 or above Cut resistant abrasion resistant tear resistant and puncture resistant Compliance certificate and lab test report to be provided Cuff Length Extended cuff for wrist and forearm protection minimum 10 cm Physical measurement to be verified Flexibility Designed to allow firm grip and free finger movement without compromising protection during rescue tasks Sizes Available in Medium Large Extra Large as per buyer requirement Physical verification to be conducted Weather Compatibility Suitable for hot humid wet and dusty environments Field trial to be conducted Washability Reusable and washable without loss of grip strength or protective performance Practical verification required Standard Conforming to EN 388 2016 Level 4 or above or equivalent standard Compliance certificate mandatory

Specifications Adult Manikin set for CPR training with provision of manoeuvring airway opening skills air ventilation and chest compression It should be made up of good quality of rubber and plastic It should be composed of 05 parts Length of the mannequin 50 to 70 Cms Width of the Chest 30 to 40 Cms The mannequin should be in 5 parts HEAD Size Length 19 to 25 cms Width 12 to 15 Cms MAIN BODY BACK side Length of the back 48 to 68 cms Width 28 to 40 cms Length of the neck 16cms to 18 cms Can be compressed by 4 to 7 cms PISTON Dia of the piston 12 to 15 cms Subject to fit over the hole on the back Height of the piston 7 to 10 cms It will be in three parts MOUTH Size Length 12 to 13 cms Width 4 to 7 cms The mouth leads into windpipe Windpipe should be spherical in shape when inflated Circumference 10 to 12 cms LUNG Radius 6 to 7 cms Length 48 to 52 cms Width 3 to 4 cms Note For detailed specification kindlye reffer attached item wise specification documents All components should be durable and designed for repeated training cycles The product must be easy to assemble disassemble and maintain

WORKING LAMP WITH WIRE OF 6 MM LENGTH 50 METER CABLE Type Portable industrial rescue working lamp with LED illumination Illumination Minimum 1500 to 3000 lumens 150 watt to 300 watt with wide area lighting Cable Length Heavy-duty insulated cable of 50 meter length with wire of 6mm including 3 pin plug 16 amp min Weather Protection Full weather protection suitable for all conditions Water proof rain resistant Dust proof Moisture Humidity resistant Corrosion Rust resistant Cable Protection Oil water and abrasion resistant heavy-duty cable Power Supply Compatible with 220 to 240V AC supply with industrial plug Lamp Protection Shockproof cage stainless steel mesh protection around lamp Waterproofing Minimum IP65 protection OEM Certificate or undertaking of firm Handle Insulated anti slip carrying handle Heat Resistance Lamp body should withstand prolonged operational heat Portability Compact and easy to deploy during disaster operations Safety Features Fuse overload protection and earthing provision Operating Environment Suitable for rain debris dust and humid conditions Carrying Bag Product should be made available with good quality carrying case for safe storage and easy transportation of lamp and cable NOTE All items must be of high quality durable and suitable for NDRF rescue operations Products should be field tested and certified as required Compliance with relevant national international standards is mandatory

E 507 DUST AND LIQUID SPLASH PROTECTION GOGGLES TECHNICAL SPECs Product E 507 Dust and Liquid Splash Protection Goggles Description Clear Hard Coated Anti Fog Pack Type Blister Pack Standards Certified with ANSI Z87 1 and IS 8521 1 for assured performance and reliability SPECIFICATION DETAILS Lens Type 5 base curve spherical lens design Provides a wide field of vision for enhanced peripheral visibility High impact resistant lens for robust protection UV protection to safeguard eyes from harmful sun exposure Anti fog lens treatment ensures clear vision in humid or high-temperature environments Hard coating makes the lens highly resistant to scratches and chemicals Frame Double injection frame with a soft nose bridge Ensures durability and comfort with dual material construction Soft nose bridge provides comfort for prolonged wear without irritation Headband Superior textile headband with side hook and back adjuster Ensures a secure fit and superior comfort Adjustable back strap for personalized sizing Ventilation Indirect ventilation for airflow without compromising protection from splashes or dust Compatibility Over the glass design allowing users to wear prescription eyewear underneath the goggles APPLICATIONS SUITABLE FOR NDRF OPERATIONS These goggles are suitable for various NDRF operations including but not limited to Cutting Operations Suitable for cutting with equipment like RR Saw concrete cutter chain saw and other cutting tools Debris Handling Protects eyes from dust fine particles and flying debris Rescue Operations Suitable during search and rescue lifting rope work and emergency response Drilling & Material Handling Provides protection from dust and particles during drilling and general handling