Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-I₹23.1 LAccepted-Finance | L-I | Accepted-Finance Being lowest | |
| 2 | L-II₹25.9 LRejected-Finance C 89 CECC VILL POST PATHOLI AGRA UP | AGRA | AGRA | UTTAR PRADESH | 283105 | L-II | Rejected-Finance Other than lowest | |
| 3 | L-III₹26.7 LRejected-Finance 23 GOURI KUNJ COLONY RONTA AGRA 282009 | AGRA | AGRA | UTTAR PRADESH | 282009 | L-III | Rejected-Finance Other than lowest | |
| 4 | L-IV₹26.9 LRejected-Finance HNO 52B LAXMI PLACE PHASE II DEORI ROAD NEAR MOHANDEV SCHOOL UKHARA ROAD AGRA 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | L-IV | Rejected-Finance Other than lowest | |
| 5 | L-V₹27.2 LRejected-Finance | L-V | Rejected-Finance Other than lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
30 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Ashwin Awadh
Garrison Engineer West 62 Station Road Agra Cantt
REPAIR / MAINT TO ALL JOINERY WORKS UNDER AGE B/R- II OF GE (W) AGRA
2022_MES_562399_2
8012/931/E8
Open Tender
Civil Works
Item Rate
180 days
GE West Agra
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE West Agra
₹80,000
11 Jan 2023
15 Dec 2022
2 Jan 2023
15 Dec 2022
30 Dec 2022
23 Dec 2022
Amount
Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exe 4.00 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.
Demolition of stone/brick masonry built in cement mortar incl all quions,Arches, pillers etc complete all as specified and directed.
M&L for brick work with using sub class 'B' brick ,straight or curved on plan exc. 6 meter radius, built in CM(1:6) for wall but complete all as specified and directed.
M&L for brick work with using sub class 'B' brick ,straight or curved on plan exc. 6 meter radius, built in CM(1:6) for wall EXCEPT BRICK complete all as spfd and directed.
S & F steel windows with side hung shutters with using 'Z' steel section without glazing bars including projected box type hinges, steel handle, steel peg stay etc dovetailed or welded complete all as specified and directed.
S & F steel windows with side hung shutters using steel section with glazing bars including projected box type hinge, steel handle, steel peg stay etc dovetailed or welded complete all as specified and directed.
S & F steel ventilators with top hung shutter & glazing bars hinges, steel peg stay complete all as specified and directed.
S&F framed work such as guard bars, grills etc and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.
M&L welding in repairs n exc. 2.5 cm in length and not exc 6.0 mm thick complete all specified and directed.
M&L welding in repairs exc. 2.5 cm but n exc 5.0 cm in length and not exc 6.0 mm thick complete all specified and directed.
Re-securing or easing and adjusting without taking down shutters of any description not exc. 1.0 sqm each complete all spcified and directed.
Re-securing or easing and adjusting without taking down shutters of any description exc. 1.0 sqm but n exc 2.0 sqm each complete all spcified and directed.
M&L factory made 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, provided with stiles and rails as specified in SSR Part-I Section-8 clause 8.20 (a) fixed to chowkats complete all as specified and directed
S& F factory made 35 mm thick 2nd class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed
M&L factory made 30 mm thick flush shutter, solid core contruction, with block board core and plywood face panels commercial type on both side fitted to chowkats complete all as specified and directed
S&F MS work as in doors framing / chokhates for cladding, glazing and the like fixed with angle cleats connecting plates, etc conforming to (Fe-290) Gde E-165 complete all as specified and directed.
S& F factory made Solid PVC Moulded Door Shutter , 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2 mm thick Moulded Prelam PVC Sheet on front face & 2 mm Plain Colour PVC Sheet on Back Face S&F in frame at site as per specification & drawing complete all as specified and direction.
Factory made single extruded WPC ( Wood Polymer Composite) solid door/ window/Ceosetory window & other Frames/ Chowkhat of 50x100 mm comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade), calcium carbonate and nature fibre ( wood powder/ rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 kg/ cum, screws withdrawal strength of 2200 N ( Face) & 1100 N (Edge) , minimum compressive strength of 58 N/mm2 and modules of elasticty 900 N/mm2 and resistance to spred flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fibre retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for seperately) complete all as spfd and direted. Note:- For WPC solid door/ window frames,minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable . Variation of profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Factory made single extruded WPC ( Wood Polymer Composite) solid door/ window/Ceosetory window & other Frames/ Chowkhat of 65x125 mm comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade), calcium carbonate and nature fibre ( wood powder/ rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 kg/ cum, screws withdrawal strength of 2200 N ( Face) & 1100 N (Edge) , minimum compressive strength of 58 N/mm2 and modules of elasticty 900 N/mm2 and resistance to spred flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fibre retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for seperately) complete all as spfd and direted. Note:- For WPC solid door/ window frames,minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable . Variation of profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed
M&L for 3 mm thick sheet glass ordinary quality and glazing withoil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed
M&L for 5.5 mm thick sheet glass ordinary quality and glazing withoil putty in square exc 0.5 Sqm in each pane complete all as specified and directed
M&L for 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane
M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including desterb surfase of existing pogition complete all as specified and directed
M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated steel surfaces complete all as specified and directed
S&F PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet etc.complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on front face and 2mm prelam PVC sheet on back face and fixing to frame incl 3nos stainless steel butt hinges of size 100mm,2 Non 200 mm aluminum anodised barrel tower bolts,2 Nos 150 mm handle etc. complete all as specified and directed.
M&L for 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame /steel frame work including required 6 mm thick teak wooden beading complete all as specified and directed.
M&L in repairs for 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame /steel frame work including required 6 mm thick teak wooden beading complete all as specified and directed.
S&F hasp and staple, safety type, aluminium adodised with mild steel hinge pin including bolt to hinge plate and fixed with screws but of aluminium anodised (Size of hasp and staple in 125mm) complete all as specified and directed.
S&F mild steel work as in bands , straps ,holdfast , hooks for hanging fans , and similar works confirming to Fe 290 , gde E-165 complete all as spfd and direted
S & F continuous (piano) hinges, mild steel, bright finish or electrogalvanised. (30mm Width of flaps when open) complete all as specified and directed.
S&F butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 100 mm)complete all as specified and directed.
S&F butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 75 mm)complete all as specified and directed.
S&F in repairs butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 75 mm)complete all as specified and directed.
S&F in repair butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 100 mm)complete all as specified and directed.
S&F 100 mm long aluminium handles,cast type,anodized complete all as spfd and direted
S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F in repairs 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F in repairs 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm long aluminium handles, cast type, anodized and fixed complete all as specified and directed.
S & F alunimium sliding door bolt 300 mm long stove enamealled black with bright bolt not less than 16 mm dia with and including and minimum of 6 boalts and nuts four on bolt plat and two on staple plate and fixed etc.
S & F in repairs alunimium sliding door bolt 300 mm long stove enamealled black with bright bolt not less than 16 mm dia with and including and minimum of 6 boalts and nuts four on bolt plat and two on staple plate and fixed etc.
S&F 300 mm long , mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as spfd & directed.
S&F In repair 300 mm long , mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as spfd & directed.
S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia or wire and average width if aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, wooden beads complete all as specified and directed.
S&F powder coating ( minimum thickness of powder coating 50 micron) aluminium frame for door , window, ventilator with one or more rebates including joining cleat for fixing etc. complete all specified and directed
S&F powder coating ( thickness or powder coating not less than 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/rm including necessary joining cleats , glazing clips, ruber neoprene packing, handles 2 Nos in each door , hinges, anodised aluminium snap beading complete all as specified and directed.
S&F powder coating ( thickness or powder coating not less than 50 micron) aluminium window, ventilator shutter, side hung type without sash bar, aluminium section weighing 0.55 kg/rm including necessary joining cleats , glazing clips, ruber neoprene packing,aluminium snap beading , screws, aluminium fitting such as peg stay 150 mm long, hinge type B-21, 100 mm long , and suitable handles complete all as specified and directed.
Taking down and refixing of aluminium door complete all as spfd and directed
S&F in repair of aluminium door clip powder coated (50 micron) for fixing glass complete all as specified and directed
S&F in Repair of aluminium door rubber beading for fixing glass complete all as specified and directed
S&F in Repair of aluminium door as per requred 5.00mm thick tinted glass, complete all as specified and directed
S&F in Repair of 12 mm thick , for aluminium door as per required prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminated fixed with aluminium clip beading, and neoprene beading complete all as specified and directed
S&F aluminium body as per requred mortice lock, verticle type, size 100 mm aluminium door 4 lever complete all as specified and directed
S&F in Repair of aluminium body as per requred mortice lock, verticle type, size 100 mm aluminium door 4 lever complete all as specified and directed
S&F double action floor spring hydraulically regulated for aluminium door made up of minimum 1.25 mm thick aluminium alloy steel sheet foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed
S&F in Repair of double action floor spring hydraulically regulated for aluminium door, made up of minimum 1.25 mm thick aluminium alloy steel sheet foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
S&F automatic hydraulic door closer, heavy duty with pivot , aluminium body, ISI marked, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 kg 80 kg complete all as specified and directed.
S&F in repair automatic hydraulic door closer, heavy duty with pivot , aluminium body, ISI marked, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 kg 80 kg complete all as specified and directed.
Dismantling floor, heart wall tiling including cement and sand mortar bedding ( but not backing ) including rubbish off the premises complete all as specified and directed
M&L for non- skid coloured creamic tiles (1st quality/ premium quality) 7 to 8 mm thick, ( square/ rectangular) area of each tiles exc 0.11 sqm but n exc 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 10 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for glazed ceramic colourd tiles joint free of size 300x200x7 mm (1st quality/ premium quality) , in vertical surfaces such as riser of step, skirting, dado and piller, over and including rendering 10 mm thick platering as bed or bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white or colourd cement to match complete all as specified and directed
Taking down cement plaster on brick or stone walls including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 on surfaces of wall finished surface fair & even complete .
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
C P Singh and Co
M/s Kok Singh Sisodia
SHRI RADHAYSHYAM JHA
M/S MAHAR CONSTRUCTION
M/s S. K. Construction Co.
SahaDevSingh Constructions
MNR ASSOCIATES
saroj constructions
M/S APOORVA CONSTRUCTION
Asha Construction
M/s K S Builders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .