Supply and Installation of 2 Nos of 5 TPH Cleaning and Grading machinery at Jambargaon Dist. Aurangabad

Amount

Bucket Elevator (G.I.) with Y-section –To feed Pre-cleaner Capacity: 6 TPH (Based on wheat, at 12% moisture & 10% impurities) over pre-cleaner Discharge Ht. – Suitable to feed Complete with 1.0 HP Electric Motor with Bonfiglioli/ PBL reduction gear system, Head & boot casing of 10 gauge, Dump hopper (1.0 x1.0x1.0 Mtr.) service platform and ladder at a suitable height, Bucket: HDPE, self cleaning type buckets, Elevator spouting 6” dia X 2.5M Long x 1.6mm (S.S.) -1No.,Bearing made of NTN/SKF/NRB or standard make, belt of Nylon food grade with speed not exceeding 1M/sec., Elevator spouting angle section x 16G –3Nos.(S.S.) with suitable inspection door opening at suitable height, One way discharge, metallic pit cover, Y-Section & other standard features. As directed by Engineer incharge.

a) Pre-Cleaner Capacity : 5 TPH (Based on wheat at 12% moisture content and 10% impurities). It should be three screen with double scalping & one grading operation model.Sieve to separate chaff and other contaminants larger &smaller that seed size with double stage aspiration system to blow out light material & a setting chamber. Complete with suitable electric motors, required air trunks, Air bend, one set of 3 screens (i.e 1No.- Top Screen, 1No.- Middle screen and 1No.- Bottom Screen), total screen area should not be less than 5.00 sq. meter, tool kit & other standard feature. The machine shall be capable for effective cleaning of various crop seeds, such wheat, paddy, Bengal gram, green gram, etc. Feed roller and hopper,Dynamically balanced fan assembly for double stage aspiration. Waste produce spout on side with bag holding clamps.All M.S sheets components will be made on CNC machine. Total motor HP will not be more than 7.5 HP. (Crompton/ Kirloskar/ Havel’s or any standard make). All screen sections will be interchangeable and screen perforation will be changed by rubber balls. Shaft: 45 mm, drawn shaft. All shafts are made of EN-8 & are mounted on pillow/flange type self aligned high quality ball bearings with built in casing. Double air aspiration system 02 meter long air trunk with 02 Elbows. Toolkit and other standard features. Bearing made: NTN/SKF /NRB /NBC or standard make.Sturdy body with steel construction of standard make like TATA/Jindal. Rectangular Pipe : Tata Steel. As directed by Engineer incharge. 45 mm, drawn shaft. All shafts are made of EN-8 & are mounted on pillow/flange type self aligned high quality ball bearings with built in casing. Double air aspiration system 02 meter long air trunk with 02 Elbows. Toolkit and other standard features. Bearing made: NTN/SKF /NRB /NBC or standard make.Sturdy body with steel construction of standard make like TATA/Jindal. Rectangular Pipe : Tata Steel. As directed by Engineer incharge.

b) Surge Hopper To be installed over the feed hopper of the Seed Pre-cleaner for giving uniform & continuous feeding to the full width of the screens. The discharge of this hopper is controlled with chain pulley system from floor level. Cap: 500 Kg (Based on wheat) approx.

c) Heavy duty steel mounting frame with service platform & ladder

d) Cyclone Dust Collector (CDC-106)- Suitable for outside installation.

e) Set of Additional 5 screens for Pre Cleaner

V.B. Elevator (G.I.) with Y-section- To feed Seed Grader Capacity: 5.0 TPH, (Based on wheat, at 12% moisture & 10% impurities) Discharge Ht. – Suitable to feed surge hopper over seed grader. Complete with 1 HP Electric Motor with Bonfiglioli/PBL reduction Gear system, feed hopper, service platform and ladder at a suitable height, Elevator spouting 6”dia X 2.5M Long x 16G (S.S.) -1No., Elevator spouting angle section x 16G (S.S.)–3Nos.with suitable inspection door opening at suitable height, One way discharge & other standard features shall be installed on floor level. Bucket: HDPE, self cleaning type buckets. Bearing made: NTN/SKF/NRB/NBC or standard make. Belt : Nylon food grade, Belt speed: will not exceed 1M/sec. Leg Casing Gauge: 16 Gauge of S.S. with suitable inspection door opening at suitable height. Head & Boot Casing Gauge- 10 Gauge, Dump Hopper: Heavy duty material G.I steel. As directed by Engineer incharge.

a) Seed Grader Cap.- 5.0 Tons/Hr. (Based on wheat at 12% moisture content and 10% impurities) It should be a three screen model. Complete with suitable electric motor, required air trunk, Air bend, one set of 3-screens (8 Sections) for one particular crop seed (i.e 1No.-Top Screen, 1No.-Middle Screen and 1No.- Bottom Screen) & other standard features(Seed grader contains 3screens model suitable for cleaning & greading of various crop seed i.e. Wheat, paddy, gram, pulses, maize & barley etc.) Feed roller and hopper.01 set of screen of particular crop, No. of screens :( Top, Middle and Bottom)02 meter long air trunk with 02 Elbows. Fan mounted in straight up position. All M.S Sheets components will be made on CNC machine. Total HP of machine will be 8.5 HP (Make : Crompton/ Kirloskar/Havel’s or any standard make, Machine will be fitted with 2 separate motors, one for fan & second for sieve deck of suitable HP. Sieves are quick interchangeable type. All screen sections will be interchangeable & screen perforation will be changed by rubber balls. Arrangement of inspection window for checking/working of screens. Toolkit and other standard features. Bearing made: NTN/SKF/NRB/NBC or standard make. Rectangular Pipe : Tata Steel Shaft: 45 mm, drawn shaft. All shafts are made of EN-8 & are mounted on pillow/flange type self aligned high quality ball bearings with built in casing. for checking/working of screens. Toolkit and other standard features. Bearing made: NTN/SKF/NRB/NBC or standard make. Rectangular Pipe : Tata Steel Shaft: 45 mm, drawn shaft. All shafts are made of EN-8 & are mounted on pillow/flange type self aligned high quality ball bearings with built in casing.

b) Surge Hopper To be installed over the feed hopper of the Seed Grader for giving uniform & continuous feeding to the full width of the screens. The discharge of this hopper is controlled with chain pulley system from floor level. Cap: 500 Kg (Based on wheat) approx.

c) Heavy duty steel mounting frame with service platform & ladder

d) Cyclone Dust Collector (CDC-120)- Suitable for outside installation.

e) Set of Additional 5 screens for seed grader.

V.B.Elevator (G.I.) with Y-section- To feed Bagging Bin Capacity: 7.5 TPH, (Based on wheat) Discharge Ht. – Suitable to feed bagging bin. Complete with 2 HP Electric Motor with Bonfiglioli/PBL reduction Gear system, service platform and ladder at suitable height, Elevator spouting 5”dia X 2.5M Long x 14G (S.S.) -2Nos., Elevator spouting angle section x 14G (S.S.)–6Nos., Two way valve & other standard features. It shall be installed on the floor level.

Bagging Bin, Cap: 5Ton (Based On Wheat) Floor supported, metallic, square, centrally discharge holding bin. The sides are made of 14 g M.S. Sheet and the hoppered bottom of 12 g M.S. Sheet. The discharge outlet is provided with manual bagging arrangement and can be controlled from floor level with chain pulley system. Transparent inspection window are provided at two levals to see seed level. Provided with top cover & service ladder.

Heavy Duty Portable bag Closing Machine, Self lubricating, single thread, portable type, hand held, electrically operated. Light weight with robust construction. Thread does not get entangled with the looper because of oscillating type looper. Smooth and simple operation. Sewing head is driven by V-belt thus minimizing noise during operation and starts with the help of finger touch micro switch. Thread cutting blade is provided for easy cutting of the thread after completion of stitching. SPECIFICATIONS: Bag Stitching Capacity : 300-350 bags/hr. Type of Sewing head. : Universal Single thread. Type of Seam. : Chain Stitching. Weight : 6 Kg. (Approx.) Electric Motor : 1/10 H.P., 8000 R.P.M, 220V, AC/DC. The unit is complete for operation with electric motor, 13 ft long flexible wire, 3 pin plug, Needles - 2Nos., Loopers – 2Nos., Thread Stand -1No., Thread Cone - 1No., Allen Keys-4Nos, DE spanner-1No., Oil Cane-1No., Screw Driver-1no. Suitable for Stitching of canvas/cloth/jute bags/polycoated jute filled with crop seeds.

Digital Eletronic Weighing Machine-Platform Type Capacity : 100 kg Display : LED PanSize : 450x450mm (Made of S.S.) Accuracy : +/- 10Gms. Advanced microprocessor based indicator system. Indicates gross and net weights. Suitable for platform scales & other oadcell based weighing kits. Stainless steel pan. Uses a single input,. Mains operation. The unit shall be complete for operation on 220 V, Single phase, 50 Hz, AC Supply.

ELECTRIC CONTROL PANEL Floor supported Cubical, Industrial type, enclosed electric control panel with lock provision for giving connections to all the electric motors of the machines. It shall be provided with the following arrangements: 1. Suitable capacity change over switch, MCCB, digital ammeter & Voltmeter and indicating lights for mains. 2. Motor starters with protective relay and fuses. Motor “ON” indication. 3.Required capacity colour coded aluminium bus bar. 4. All the internal connections with copper conductor cable with glands, lugs etc. 5. 220 Volts, 16 Amps outlets-2 Nos.- For operating other equipment like bag closer, moisture meter etc. 6. The purchaser shall provide proper electrical connection from mains and earthing to this electric panel or D.G. as per state govt. laws. Properly finished and painted with anti-corrosive paint. It shall be installed in the processing hall at a suitable and convenient place near the machines for ease in operation. The wires and cables are of Finolex /Havells etc. Switches of L&T /ABB /Siemens /Schneider shall be used.

Transportation of all part of the C & G machinery from manufacturing facility to installation site at jambargaon including transit insurance, all material, labour, etc.

Installing the C & G machinery at site as per laydown procedure & commissionig the same, Including excavation, cement concrete block, foundation bolts for foundation of machinary & giving trial run at site etc.

Supplying, erecting & terminating XLPE armoured cable 4 core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW-EXN?CT

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 80/100A in provided distribution board complete.

Supplying erecting and marking triple pole isolators only switch version of miniature circuit breaker of 63A with required wiring connections and lugs etc. in provided distribution board complete.

Agro Asian Industries

SK AGRO INDUSTRIES

Osaw Agro Industries Pvt. Ltd.

OSAW Industrial Products Pvt. Ltd.