Renovation of 2nd floor, Sanchar Bhawan, 20 Ashoka Road, New Delhi Interior Civil and Electrical works

Providing and Laying, 19mm thk. Polished Kalingastone Engineered Marble of approved colour shade & size in the Flooring in slabs/bands/strips as per drawing/ flooring pattern, laid with MYK LATICRETE Stone Adhesive make etc complete. The flooring will be mirror polished as per approval. Cost to include appropriate coating of Latecrete make under the stone and at joints and top surface & Hacking/chipping of existing screeding and covering the flooring with 3mm 200 GSM PVC corrugated Floor protection sheet to prevent from dirt, scratch etc.ALYSSA/ (Basic cost of Marble = Rs. 350 /sft) If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution will be carried out as per approved drawing and direction of Engineer in charge.

"P/F Flooring, 8.5mm thk matt finished SIMPOLO TOAST WHITE VITRIFIED Tiles of approved colour shade of size 600x1200 cut to profile as per drawing, laid on plastered wall fixed using MYK LATICRETE Tile Adhesive finished with matching colour pigment to match the shade of stone including polishing complete. Cost to include appropriate protection of tile at joints and covering to prevent from dirt, scratch etc. The laid sample to be approved for workmanship and quality acceptance. The laid tiles and joints to be protected by masking tape prior to grouting. Tile to be laid with paper joint i.e butt jointed without spacers. Cost to include hacking/chipping of existing screeding. (Basic cost of tile : Rs. 100 /sft )Note : P/A of covering sheet in the hard flooring (granite/marble/tiles etc) to required thickness, complete, to protect the flooring from dirt, scratch, etc needs to be considered.If the basic rates differ by (+-10%), then necessary adjustment shall apply.Execution shall be carried out as per approved drawing and direction of E I charge.

"P/F 100mm(maximum) Skirting/dado, in 15mm thk matt finished SIMPOLO SAGA WHITE FULL BODY VITRIFIED Tiles of approved colour shade of size 790x3000 cut to profile as per drawing, laid on plastered wall including levelling with cement mortar(1 cement : 4 course sand) and fixed using necessary MYK LATICRETE Tile Adhesive finished with matching colour pigment to match the shade Tile including edge polishing whereever required etc complete. Appropriate protection of tile at joints and covering to prevent from dirt, scratch etc. The laid sample to be approved for workmanship and quality acceptance. The laid tiles and joints to be protected by masking tape prior to grouting. Tile to be laid with paper joint i.e butt jointed without spacers. Cost to include hacking/chipping of existing wall surface. (Basic cost of tile : Rs. 120 /sft ).If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge. Note : P/A of covering sheet in the hard flooring . (granite/marble/tiles etc) to required thickness, complete, to protect the flooring from dirt, scratch, etc needs to be considered while carrying out the work. "

"providing and fixing coping and jambs of avg.200mm wide15 mm thick matt finished SIMPOLO SAGA WHITE FULL BODY VITRIFIED Tiles of approved colour shade of size 790x3000 cut to profile as per drawing, laid on plastered wall including levelling with cement mortar(1 cement : 4 course sand) and fixed using necessary MYK LATICRETE Tile Adhesive finished with matching colour pigment to match the shade Tile including edge polishing whereever required etc complete. Appropriate protection of tile at joints and covering to prevent from dirt, scratch etc. The laid sample to be approved for workmanship and quality acceptance. The laid tiles and joints to be protected by masking tape prior to grouting. Tile to be laid with paper joint i.e butt jointed without spacers. Cost to include hacking/chipping of existing wall surface. (Basic cost of tile : Rs. 120 /sft )If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge. Note : P/A of covering sheet in the hard flooring (granite/marble/tiles etc) to required thickness, complete, to protect the flooring from dirt, scratch, etc needs to be considered while carrying out the work. "

"P/F 100mm(maximum) Skirting, 8.5mm thk matt finished SIMPOLO TOAST WHITE VITRIFIED Tiles of approved colour shade of size 600x1200 cut to profile as per drawing, laid on plastered wall and fixed using necessary MYK LATICRETE Tile Adhesive finished with matching colour pigment to match the tile shade including edge polishing whereever required etc complete. Appropriate protection of tile at joints and covering to prevent from dirt, scratch etc. The laid sample to be approved for workmanship and quality acceptance. The laid tiles and joints to be protected by masking tape prior to grouting. Tile to be laid with paper joint i.e butt jointed without spacers. Cost to include hacking/chipping of existing wall surface. (Basic cost of tile : Rs. 100 /sft )If the basic rates differ by (+-10%), then necessary adjustment shall apply.Note : P/A of covering sheet in the hard flooring (granite/marble/tiles etc) to required thickness, complete, to protect the flooring from dirt, scratch, etc needs to be considered while carrying out the work. " Execution shall be carried out as per approved drawing and direction of E I charge.

"Providing and Laying 12mm thk Matt finished vitrified ties of size 600x600 in the(Toilet and pantry) flooring with necessary slope and laid in any pattern and of approved make, colour/shade laid using MYK LATICRETE Tile Adhesive.The laid sample to be approved for workmanship and quality acceptance. The laid tiles and joints to be protected by masking tape prior to grouting. Cost to include pointing of 2mm gap using epoxy grout of MYK LATICRETE make 500/600 series, of approved colour/shade including Hacking/chipping of existing screeding. (Basic cost of tile : Rs. 95 /sft )Note : P/A of covering sheet in the hard flooring (granite/marble/tiles etc) to required thickness, complete, to protect the flooring from dirt, scratch, etc needs to be considered. Make:Kajaria/Somany "(Basic cost of tile : Rs. 95 /sft )If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge.

CARPET FLOORING Providing and laying of Carpet Tile over the specified area with following specification. The floor which recieves the carpet to be thorougly cleaned as per manufacturer's specification. The carpet is to be laid over a bed of manufacturer's approved adhesive spread evenly over the entire floor. The rate shall include cutting, trimming, fixing and clearing away of residual material to a location as directed. The rate shall also include supplying and laying of a protective layer of PVC or HDPE sheet of 50 microns thickness, held together with scotch tape. The laid carpet to be vacuumed after the removal of protective cover/on commissioning. If after the protective layer is removed and stains observed in the carpet because of in adequate protection, the same shall be shampooed and made good to the satisfaction of the project managers. The measurements of carpet will be the actual laid area. (Basic cost of tile : Rs. 200 /sft ) If the basic rates differ by (+-10%), then necessary adjustment shall apply.

Providing & laying carpet tile with following specification: Make : Desso / Milliken /Hiya Size : 500mm x 500mm Style: Tile carpet Construction : Tufted Textured Loop Fiber Product: 100% Solution Dye PP Gauge: 39.4/10cm. (1/12) Finish Pile Thickness: 7.49mm +/- 0.5 Production yarn weight: 20 oz Dye Method: 100% solution Dyed Primary backing: Action Back Tuft Bind: As per ASTM Standards Delamination Strength: As per ASTM Standards Static Control: As per ASTM Standards Soil retardant: Protek Anti-Microbial:Alphasan Built in Protection Moisture Control: Yes Electrostatic propensity: less than 3.5KV-Permanent Cond Flammability( Radient Panel ASTM-E-662): >_0.45 ( Class I) Execution shall be carried out as per approved drawing and direction of E I charge.

Providing and Fixing of Raised Access Flooring with panel with Bare / HPL Anti static top finish . Suggested brand : Unitile P/F false flooring comprising of 25mm diameter mild steel stud shall be threaded with a nut and check nut 6mm. Mild steel base plate placed at all junctions of the panels approximately at 1.3. Center. Top head attachment of the pedestals pressure die-cast aluminum alloy class LM6. Stringers made of cold rolled mild steel channels of size 40mm x 40mm x 3mm placed over top head attachment of pedestals. The stringers shall be zinc electroplated to a minimum thickness of 15microns. Panels manufactured from steel with lightweight cementious core in the size 600 X 600 X 35 mm. The floor panels shall have Access Managers and openings of sizes as per IT requirement. 2mm thick high pressure decorative laminated sheet, anti-static fire-rated and abrasion resistant quality (flooring grade formica, Durosurt of equivalent as approved of required shade, fixed to the top of particle board floor panels with adhesive of approved quality and machine pressed includes cost of providing holes and openings. 3mm thick hard P.V.C beading, G.I. Sheet to the bottom surface and sides of the floor panels and aluminum cleats of size 20x20x2mm screwed to the bottom of floor panels. Suggested Brand :LG/ HEWETSON/ UNITILE. Included in this item is cutting of holes/ openings with special cutter to achieve a seam less edge and also supply of vacuum pull. Height of false Floor is:The point load should be 300Kg. and UDL of 800Kg. / m2 "Stringer: The stringer shall be hot dipped galvanized steel cold rolled construction specially designed lateral stability, and for enhanced rolling loads and other structural performance of the system. The stringer to have a counter sunk holes at both ends to accommodate bolting of M6 machine screws to the pedestal head assembly. The stringers shall be 25 x 25 x 1.00 mm thick of 540 mm length.Note : 2 no.s of vaccum puller needs to be provided to client."

Ht of false flooring : 300mm Basic cost : Rs 225 /sft.If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge.

Providing and laying 2mm thk. Anti Static vinyl Flooring along with copper strip of minimum thickness of 0.5 mm and should be connected with bass bar. Rate shall be inclusive of self levelling compound as per site condition. Suggested Brand: Armstrong/LG or equv. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F Plywood Steps made of Salwood frame in the UPS/Server room, closed on all sides with 19mm plywood, with 1mm antistatic laminate (matching the false floor) or white laminate. The verticals on the false flooring side also to be closed. Ht of false flooring : 150\300 mm. Execution shall be carried out as per approved drawing and direction of E I charge.

Wall Cladding

P/F, 20mm thk leather finished Granite of approved colour shade & size in slabs cut to profile as per drawing, laid on plastered wall fixed using necessary MYK LATICRETE STONE Adhesive/KERAKOLL H40 GEL adhesive as per suggested application finished with dry joint with 5mm spacing including edge polishing to match surface etc complete. (The 5mm Spacing to have sunken filling matching colour pigment to match the shade of stone only if required in corners). Cost to include appropriate coating of LATICRETE make under the stone and at jointsThe laid sample to be approved for workmanship and quality acceptance. The laid stone and joints to be protected by masking tape. Cost to include hacking/chipping of existing wall surface to make it levelled for execution. (Basic cost of granite = Rs. 200 /sft). If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F, 15mm thk matt finished SIMPOLO SAGA WHITE FULL BODY VITRIFIED Tiles of approved colour shade of size 790x3000 cut to profile as per drawing, laid on plastered wall fixed using necessary adhesive finished with matching colour pigment to match the shade of tile including polishing complete. Cost to include appropriate protection of tile at joints and covering to prevent from dirt, scratch etc. including Hacking/chipping of existing screeding and levelling the walls surface with cement mortar(1 cement : 4 course sand) as required etc (Basic cost of simpolo = Rs. 120 /sft) If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and as per direction of E I charge.

P/F Dadoing using 8mm thk matt finished Vitrified Tiles of approved colour shade of size 300x600 cut to profile as per drawing, laid on plastered wall fixed using necessary adhesive finished with matching colour pigment to match the shade of tile including edge polishing complete. Cost to include pointing of 2mm gap using epoxy grout of Laticrete make 500/600 series, of approved colour/shade including Hacking/chipping of existing screeding and levelling the walls surface with cement mortar(1 cement : 4 course sand) as required etc (Basic cost of simpolo = Rs. 75 /sft) Make:Kajaria/Somany If the basic rates differ by (+-10%), then necessary adjustment shall apply. Excution shall be carried out as per drawing and direction of E I charge

P/F Dadoing using 6mm thk matt finished ceramic tiles of approved colour shade of size 200x200 cut to profile as per drawing, laid on plastered wall fixed using necessary adhesive and finished with matching colour pigment to match the shade of tile including grinding and finishing joints etc complete. Cost to include pointing of 2mm gap using epoxy grout of Laticrete make 500/600 series, of approved colour/shade including Hacking/chipping of existing screeding and levelling the walls surface with cement mortar(1 cement : 4 course sand) as required etc. (Basic cost of Simpolo = Rs. 75 /sft). If the basic rates differ by (+-10%), then necessary adjustment shall apply..Excution shall be carried out as per approved drawing and direction of E I charge.

CEILING General: Under this subhead, all the seen surfaces shall be measured and paid for.

P/F suspended pre-finished ceiling grid incl. proprietary suspension system, pre-finished framing, edge trims and other accessories of KNAUF CEILING Mineral Fibre Acoustical Suspended Ceiling System with Classic (Bevelled Tegular) Edge Tiles With KNAUF CEILING SOLUTIONS (ARMSTRONG) 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 95%,NRC 0.5, Light Reflectance ?85%, Thermal Conductivity ? = 0.052 - 0.057 W/mK, Colour White, Fire Performance Class 0/ Class 1 as per BS 476 Pt - 6 & 7 Class A as per ASTM E-84 in module size of 600 x 600 x 20mm, suitable for Green Building application, with Recycled content upto 78%. The tile shall be laid on Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in black/white colour and with a web height of 38mm and a load carrying capacity of minimum 11.25 Kgs/M2 & pull out strength of 100Kgs. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system Make: Armstrong. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F in position Edge Trim 50mm Classic Axiom Profile- AX2STR421 in Suspended pre finished ceiling grid specified above to match with necessary accessories Manufactured by M/s Knauf ceiling solutions (Armstrong) world industries. Make: Armstrong or equivalent. Refer Drawing no A71.500.01.1.01 .Execution shallbe carried out as per approved drawing and as per direction of E I charge.

"P/F in position GYPSUM board false-ceiling suspended on the G.I. frame work consist of Perimeter channel of size 27mm x 0.5mm. Intermediate channel of size 45mm x 0.5mm thick. Ceiling section of 0.5mm thickness. 12.5mm thick tapered edge gypsum plaster board fixed to ceiling channel with 25mm dry wall screws at 230mm centers Jointed and finished with requisite filler, paper tape, finished with gypsum putty and 2-3 coats of primer suitable for Gypsum plaster boards & finishing the same with 3 coats of acrylic emulsion paint as/app. Rate to include vertical bands of 100mm to 250mm and making necessary cut-outs/openings for light fittings, diffusers etc. All components to be of Gyproc & all spacings should match their recommendation & standards.Note: Measurement for vertical band will be considered part of the ceiling works. No seperate charges shall be paid for vertical bands.Execution shall be carried out as per approved drawing and as per derection of E I charge.

"P/F in position MR gypsum board (hydro) for wet areas. GYPSUM board false-ceiling suspended on the G.I. frame work consist of Perimeter channel of size 27mm x 0.5mm. Intermediate channel of size 45mm x 0.5mm thick. Ceiling section of 0.5mm thickness. 12.5mm thick tapered edge gypsum plaster board fixed to ceiling channel with 25mm dry wall screws at 230mm centers Jointed and finished with requisite filler, paper tape, finished with gypsum putty and 2-3 coats of primer suitable for Gypsum plaster boards & finishing the same with 3 coats of acrylic emulsion paint as/app. Rate to include vertical bands of 100mm to 250mm and making necessary cut-outs/openings for light fittings, diffusers etc. All components to be of Gyproc & all spacings should match their recommendation & standards.Note: Measurement for vertical band will be considered part of the ceiling works. No seperate charges shall be paid for vertical bands. - " Execution shall be carried out as per approved drawing and as per direction of E I charge.

Providing and fixing mdf Cove of 150x150 finished with 3 coats of emulsion paint on the edges of Gypsum/Grid Ceiling with or without light as per locations .Execution shall be carried out as per approved drawing and as per direction of E I charge.

P/F Flat Veneered Ceiling comprising of necessary framework of well seasoned Hard wood / Board / MS box sections/angles with 12mm th. Comm. Ply as base and 4mm thk veneer as the finishing layer complete with all edges having suitable lippings/veneer etc. complete. The same shall be turned 75mm on sides The surface will be melamine polished as/app. with grooves as/det. Provision for cove/surface lights will have to be kept. (Basic price for Veneer = Rs.250 /sqft) If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge.Refer Drawing no A71.500.01.1.01

"P/F 'MULTI B' Linear Slat Ceiling 30B/80B/130B/180B Perforated Aluminium Panel ceiling of approved colour consisting of panel 30mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm/0.5mm/0.5mm/0.6mm thick Perforated Aluminium Panel of 2 mm diameter diagonal patten with 5 mm centre to centre apertures represents 16 % openness with panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, and shall be stove-enamelled in a continuous coil coating process with the approved colour on the exposed side and the reverse side with polyester primer. The coated coil is passed thru the ARKU SIX Hi configuration roller levelling process to ensure the flatness of the coil. Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3105 (Al. Mg) for higher strength and good roll forming characteristics. The panel shall be clipped to a baked enamelled Aluminium panel carrier of 62mm wide x 29mm deep made of 0.95mm thick in standard length of 5 mtrs made of doubled baked enamelled Aluminium alloy AA 3005 (Al. Mg) black with cut outs to hold the panels in a module of 50/100/150/200 mm (width of gap 20mm open). The Carrier shall be suspended by means of G.I. suspension rod 6mm diameter, and a Galvanised suspension spring clip at a distance of 1.2mtrs centre to centre. The Linear Aluminium ceiling system should meet the required standards for Green Pro certification and should qualify as a green product as per CII green products and services council. The manufacturer should be ISO 9001:2015 Quality Management System Certification compliant with in house testing facility and should have their own manufacturing plant in India.Suggested Brand : Hunter Douglas or Equivalent (Basic price Rs.600 /sft)" If the basic rates differ by (+-10%), then necessary adjustment shall apply. Excution shall be carried out as per approved drawing and direction of E I charge.

P/F Window Pelmets made out of 19mm HDF Board in L- profile along the wall edge and inverted C-profile along glass parititon fixed to RCC slab/ply frame work with fasteners. with 3 coats of emulsion paint of approved shade to the board. Width and Depth : 150mm deep x150mm wide.Refer Drawing no A71.500.01.1.02 Excution shall be carried out as per approved drawing and direction of E I charge.

P/F Trap Door in Gypboard ceiling, size upto 1850x1200mm as per service requirement. Suggested Brand Knauf. (Cost to include necessary cutting of suspended /gypboard,etc & finishing the same) Excution shall be carried out as per approved drawing and direction of E I charge

P/F 6mm Ply Pcs (600mm x 600mm) to strengthen the Fiber Tiles for fixing the speakers, detectors, Lights fitting etc in desired shape. Execution shall be carried out as per approved drawing and direction of E I charge.

PARTITIONS & PANELLING General and mandatory 1. The GI frame work in partition to have verticals as required (max 600 c/c) and as per Manuf.'s specs. And horizontals at every 1200 mm c/c or as per the Pattern of grooves whichever is less . Cost of partitions to include insertion of necessary wooden members at skirting level /door frame edge or elsewhere as deemed fit by him 2. At all services outlets such as switch sockets, data out lets, AC grills, etc. Horz. member of adequate size and section to be provided 3. All full ht. partitions, unless otherwise specified will go upto RCC slab, complete with insulation, Gyp. Board etc. will be paid upto false ceiling level. 4. All panelling framework, unless otherwise specified will go upto bottom of true ceiling except the skins which can be stopped at false ceiling 5. All exposed wooden surfaces in this Item or anywhere else in the BOQ to have melamine polish as per approved sample 6. All wooden/mdf framework under this item or anywhere else in the BOQ to be treated with anti termite and fire retardant paint ( viper or equv.) 7. All the wooden framework under this Item or anywhere else in the BOQ will have well seasoned wooden members of species as defined in the individual item 8. All Glass to Glass, Glass to wood and Glass to SS joints shall be sealed with Dow Corning Glass sealant with minimum contact surface to be not less than 6mm after cleaning and masking procedure with full tool & tackle. Silicon works to be got done by an approved specialized Agency 9. All panel like, gypsum board, MDF, Ply veneer etc to be fixed to the channels with dry wall screws, jointed and finished with requisite filler, paper tape, finisher and and primer suitable for the surface. 10. The outer skin on either side shall have 10mm grooves with aluminum 'L' angle bends fixed to the thickness of board at the edges, neatly finished as and where required. 11. All gypsum partitions to have 40mm wide 12mm thk MDF on corners on both sides(outward turning partition) to protect edges. Cost for the same shall be included in partition item 12. Partitions to have extra skin of wire mesh only when specified by the client for security reasons in given areas. The same will be paid separate extra only for the wire mesh 13. All glass edges to be polished before finishing partitions (typically required in case of non toughned glass)

P/F Aluminium Frame for Partitions of 50x50mm 1.5mm thickness size consisting of vertical studs & horizontal members wherever required as per manufacturers specs and groove pattern (Max 600 c/c), using Jindal sections, hardwood will be inserted as may be required to fix door frames skirting etc. Quote only for framework. Excution shall be carried out as per approved drawing and direction of E I charge

P/F Aluminium Frame for Paneling of 50x25m 1.5mm thickness size consisting of vertical studs & horizontal members wherever required as per manufacturers specs and groove pattern (Max 600 c/c), using Jindal sections, hardwood will be inserted as may be required to fix door frames skirting etc. Quote only for framework. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F Gypsum board partitions of any shape - single layer on both sides of the G.I. Framework. 12.5mm tapered edge gypsum plaster board fixed to the channels with dry wall screws, jointed and finished with requisite filler, paper tape, finisher and and primer suitable for gypsum plaster boards. All components to be of India Gypsum. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F Gypsum board panelling - single layer only on one side of the G.I. Framework. 12.5mm tapered edge gypsum plaster board fixed to the channels with dry wall screws, jointed and finished with requisite filler, paper tape, finisher and and primer suitable for gypsum plaster boards. All components to be of India Gypsum. Execution shall be carried out as per approved drawing and direction of E I charge

"P/F 50x30mm Single glazed Modular Aluminium Partition System of DORMAKABA ALTERRA or Equivalent demountable glass partition using 10mm Toughened/ Laminated glass in proprietary Black aluminium sections ALT 50 of size 50mm x 30mm with Concealed sealing (No visible Gaskets/Seals) with acoustic rating of Minimum 32 db with third party test certificate. The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets. THe Glass to be fixed with help of Proprietary Stability GRIPPER Clamp to have a stable system. It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view at both side of section. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one side. Optional Profile Bottom Seal pair for additional accoustic if required.All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing.Approved Manufacturer: Profiles/Frames black finish: DORMAKABA, Glass : Saint Giobain/Asahi" Execution shall be carried out as per approved drawing and direction of E I charge

P/F 50 mm thick Knauf ECOSE Acoustic Glass wool Roll insulation of 48 kg/ cum density to be filled in the cavities of Aluminium frame work in partitions from floor up to RCC slab above. Make Knauf. Execution shall be carried out as per approved drawing and direction of E I charge.

"P/F 100x25mm Double glazed Modular Aluminium Partition System dormakaba ALTERRA Access or equivalent demountable glass partition using 10mm Toughened/ Laminated glass in proprietary natural anodised/Black/ Other colors aluminium sections of size 100mm x 30mm with Concealed sealing (No visible Gasekts/Seals) with acoustic rating of upto 50 dB with third party test certificate. The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets.It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view at both side of section. Optional Profile Bottom Seal pair for additional accoustic if required.Glass thickness - 10+12 (TSG)All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing.Approved Manufacturer: Profiles/Frames black finish: DORMAKABA, Glass : Saint Giobain/Asahi" .Execution shall be carried out as per approved drawing and direction of E I charge.

P/F of Straight toughned glass partitions with 10mm thk tougned glass, 2100mm height from raised floor to false ceiling, fixed including all necessary hardware and support above false ceiling as per detailed drawing, all including necessary hardware, handles, locks etc. Shop Drawings to be approved by Architect . Execution shall be carried out as per approved drawing and direction of E I charge.

P/F Air Tight Plenum (ATP) / Air Tight Parititon above false ceiling upto bottom of slab, with 12mm thk comm ply & reqd salwood framework fixed to the slab to collect return air. The vendor has to ensure that all the joints, corners are properly sealed & concealed with reqd paper tape, silicon sealant, adhesive, filler etc as approved by architect. Execution shall be carried out as per approved drawing and direction of E I charge.

Supply of Dormakaba Variflex Operable wall consisting of 85 mm thick individually movable elements with sound insulation upto 50dB, suspended from a top track only. Each panel to have top and bottom operable pressure seals operated by a crank handle to ensure optimum contact pressure of 800N. The elements must be inter-connected by means of a positive locking concave/convex aluminium profile. Each element must be constructed of a non-deflecting steel tube frame and aluminium profiles, bolted together. The frame must be clad either side with 16 mm MDF panels hung in acoustic isolation from the frame and allowed to vibrate independently of the frame. The facia panels must also be easily removable. The panel must be filled with high density rock wool in accordance with the specified sound insulation requirements. The telescopic element must open and close 120 mm and must be operated by a single mechanism for both the top and bottom seals. Commission room Size:4765mm wide 2420mm 4 panels, Committee room Size:4765mm wide 2420mm 4 panels, VIP Visiting Waiting area Size:4765mm wide 2420mm 4 panels . Execution shall be carried out as per approved drawing and direction of E I charge

Extra Skins over partitions Note : 1) All grooves in Laminate/Veneer will be 4mm wide and neatly finished/cleaned with nail holes filled and finished in dark polish 2) The exposed edges of all Skin Types will be edge bound with suitable laminate/veneer/wood etc. as per Architects' directions 3) All Gypsum boards shall have Al. angle / MDF bead on the edges and corners finished with Beedex or equivalent 4) the cut outs made for erection of ducts / cts / cable tray to be finished properly & shall not be claimed extra 5) Cost of skins shall include all the above said. 6) Where plywood/MDF has to be fixed to walls, cost shall include necessary spacers/framework to achieve plumb level 7) All partitions that turn at 90 degrees to be provided with 6mmx6mm Al.

P/F of MATT finish laminate of approved colour/shade/design over a 12mm comm. Ply / mdf. With laminated edge binding all around as per the drawing. The MDF / Comm. Ply shall be fixed on to the partition/ panel with dry wall screws. Execution shall be carried out as per approved drawing and direction of E I charge

P/F of Gypboard skin with 12mm grooves complete with angle beadings & paper tape as/manuf. Specs. 12.5mm tapered edge gypsum plaster board fixed to the chanels (behind single layer of gypsum board) with dry wall screws, jointed and finished with requisite filler, paper tape, finisher and and primer suitable for gypsum plaster boards. The outer skin shall have 12mm grooves with aluminum 'L' angle bends fixed to the thickness of board at the edges, neatly finished. All components to be of India Gypsum. Execution shall be carried out as per approved drawing and direction of E I charge .

P/F of 12mm thk MDF Board Skin fixed in straight or curved profile to the framework/skins/any subsurface with 10mm grooves. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F of 12mm thk Comm ply Skin fixed in straight or curved profile to the framework/skins/any subsurface with 10mm grooves. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F of 19mm thk Comm ply Skin fixed in straight or curved profile to the framework/skins/any subsurface with 10mm grooves. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F of 12mm thk Marine/Water proof ply Skin fixed in straight or curved profile to the framework/skins/any subsurface with 10mm grooves. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F of Pinup Board made of 12mm thk EchoPanel fixed on 1st quality commercial ply . Execution shall be carried out as per approved drawing and direction of E I charge.

P/F of white boards with 3M writing film as per detail drg, with matching laminated edge binding all around. Cost to include the necessary wooden members required in the GI Framework to fix this white boards.Execution shall be carried out as per approved drawing and direction of E I charge.

P/F of 6mm thk high durablity lacquered glass writing board with 3M opaque white/coloured film/painted rear. This shall be fixed to partition/skins with 2 sided structural 3M tape. Cost to include necessary wooden members required in the GI Framework to fix this Glass Writing Board. Suggested Brand: Saint Gobain .Execution shall be carried out as per approved drawing and direction of E I charge.

P/F of 8mm thk colored Lacquered glass fixed to partition/skins with double side tapping or studs, color as/app . Cost to include the necessary wooden members required in the AI Framework to fix this Color Back Glass. Suggested Brand : Saint Gobain Execution shall be carried out as per approved drawing and direction of E I charge.

P/F CONTINUUM FELTINA 18mm thk Double layered with 100% wool felt with PET substrate and bio degradable acoustical panels with following specifications. With up to 0.9 NRC. Fire resistant - ASTM E 84 Class A Euroclass B-S1, d0. Size 1200x2400mm Make: CONTINUUM (Basic Rate 300/sqft)If the basic rates differ by (+-10%),then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge.

P/f 1mm Slate tiles as per approved sample over 19mm comm. Ply with approved adhesive on wall areas as per detailed design. Base rate of Slate tiles = Rs. 110 / SftIf the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F 1.5 to 2mm thick 40mm high extruded anodized aluminium skirting as per IS standard pasted/fixed over 12 mm thick BWP ply with metallic laminated groove as per Architects approval. Suggested make: DORMA/DEKO/KUBIK/BOTTOMLINE Refer Drawing no A71.500.02.2.02 . Execution shall be carried out as per approved drawing and direction of E I charge.

PP/F Digital printed 3M Wall Graphic Vinyl + 3M matte lamination pasted with appr. Adhesive solution without any bubbles or unevenness over wall/partitions as /design. Suggested brand: 3M Basic rate: 300/- per sq ft.If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F UV printed Canvas - 340gsm using adhesive on ply . Basic cost of printing and adhesive Basic rate: 200/- per sq ft.i.e2152/sqm.If the basic rates differ by (+-10%), then necessary adjustment shall apply.Execution shall be carried out as per approved drawing and direction of E I charge.

P/F UV printed 6mm Birch - White + CMYK using adhesive on ply base . Basic cost of printing and adhesive Basic rate: 400/- per sq ft.If the basic rates differ by (+-10%), then necessary adjustment shall apply.Execution shall be carried out as per approved drawing and direction of E I charge.

P/F of 3M 8150 Optical Film on glass partitions with with printing in Solid Color in 50-80% transparency as per Architects approval. If the basic rates differ by (+-10%), then necessary adjustment shall apply.Execution shall be carried out as per approved drawing and direction of E I charge.

P/F 3M Scotchcal 7725 special effect frosting film on glass as per pattern / design. 15 Years MCS warranty from 3M India ltd. Execution shall be carried out as per approved drawing and direction of E I charge.

P/f 3M Controltac IJ180C printed graphics film for pasting directly on walls/partitions. Main Artwork to be supplied by the client. Cost to include the nominal designing charges of the 3M vendor.Execution shall be carried out as per approved drawing and direction of E I charge.

P/f LG Opaque Vinyl with Plotter Cutting and mounting to a wall surface. Main Artwork to be supplied by the client. Cost to include the nominal designing charges of the 3M vendor.Basic cost -220rs/SFT.If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F of 4mm Veneer in Matt PU Finish (Straight Grained Teak Veneer / Wall Nut Veneer of approved make and approved sample) over a 12mm comm. Ply. With matching polished 6mm TW edge beading all around and 4mm grooves as per the drawing. The MDF / Comm. Ply shall be fixed on to the partition/ panel with dry wall screws. (Basic price for Veneer = Rs.225 /sqft).If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge

P/F of 4mm Veneer in matt melaminepolished(Straight Grained Teak Veneer / Wall Nut Veneer of approved make and approved sample) over a 12mm comm. Ply. With matching polished 6mm TW edge beading all around and 4mm grooves as per the drawing. The MDF / Comm. Ply shall be fixed on to the partition/ panel with dry wall screws. (Basic price for Veneer = Rs.225 /sqft) If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge

DOORS AND WINDOWS General and mandatory : 1. All exposed wooden surfaces to have melamine polish /PU polish as per drawing 2. All Locks in the various Doors to have master key system 3. The flush door shutter will be solid core as/app 4. All wooden sections to be treated with anti- termite & fire resistant treatment 5. All flush doors should have provision for fixing access control equipments etc. Cost of the same shall not be claimed extra 6. All locks, handles, hinges, door stays, door stopper etc as per approval only 7. All doors should be provided with 12mm rebate for better acoustics 8. Any change in ht of doors due to site conditions will be paid accordingly as per sq.m rate quoted for doors. TOUGHENED GLASS DOORS :

P/F GD1 frameless Entrance Door assembly comprising of Frameless 12mm thick toughened glass single leaf Door shutter with Dorma pull Handle TGDIH 800 X 32 back to back with 700mm CTC, adjustable fixing for glass, The pull handles should have supporting washer with raised bevelling on the outer surface. Length = 800mm, 32mm dia, -SS304. 'Dorma floor spring BTS 85V EN 1-4 with std. spindle and cover plate. The floor spring with backcheck and adjustable closing speed from 175°. With Hold open. As per EN 1154 and CE marked. Finish: Satin stainless steel with S.S half moon door stopper fixed to flooring. Brand for Door Hardware: Dorma . Size : 1280 x 2100 H (Area upto 3.00 Sqm.) Execution shall be carried out as per approved drawing and direction of E I charge.

"P/F Single Leaf Aluminium Glazed Door ALT100 or Equivalent with Glass infill of toughened/Laminated glass with ALTERRA 100x30mm Rebate door frame System all around the door. Aluminium Stile to be formed out of 100x45mm Horizontal and Vertical Door Profile frame with clips & seals. Door Hardware -Concealed Door Closer ITS 96 With Slide Channel and Hold Open, Pure 8906 anti-microbial Lever Handle with Narrow stile Lock package and Door Drop down seal.Suitable for Glass thickness of 10/12/13.52mm.The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system.All Profiles to be with 1.5 mm Gauge thickness Excluding 20 Micron of Anodizing. .Execution shall be carried out as per approved drawing and direction of E I charge. Single Leaf swing door- 1000x2700mm" (Area upto 3.00 Sqm.)

P/F Single Leaf Aluminium Glazed Door of dormakaba ALTERRA ALT 50 or Equivalent in black finish: with Glass infill of toughened with Alterra rebate door frame System all around the door. Aluminium Stile to be formed out of 70x35mm Horizontal and Vertical Door Profile frame with clips & seals. Door Hardware -Flush hinges, Cam Action Open Door Closer with Slide Channel and Hold Open, Offset Pull Handle 350 x25mm, Narrow stile Lock package with 70mm EPC both side key including master key. Glass thickness - 10mm clear toughened glass.The Profile shall be matt black anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. Door Closer to be in compliance with ADA and RPWD where in the opening force should be less than 22.5 N through out the opening of the door. Single Leaf swing door- Execution shall be carried out as per approved drawing and direction of E I charge. 1000x2700mm.(Area upto 3.00 Sqm.)

P/F D1 Single Panel Flush door with 40mm thick solid core single shutter with PU finished 4mm thick Veneer on both sides, best quality SS door hinges of sizes 125*64*2.5mm, 4 nos.,with inbuilt wooden frame in built in wall panel partition Polyvinyl door stopper fixed to skirting/floor mounted, SS finish tubular handle of standard make, with mortice lock, 60mm long key cylinder and with hold open door closure. Make Dorma -SS finish, Basic Price of Veneer Rs. 200/ sft.If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge. Size: 900 x 2400. Drawing no A71.102.02.1.05

P/F D1b Single Panel Flush door with 40mm thick solid core single shutter with 4mm thick Veneer on one side and 1mm thick laminate finish of approved shade on the other side ,best quality SS door hinges 4 nos., size 125x64x2.5 mm with inbuilt wooden frame in built in wall panel partition Polyvinyl door stopper fixed to skirting/floor mounted, SS finish tubular handle with mortice lock, 60mm long key cylinder and with hold open door closure. Make Dorma -SS finish, Basic Price of Veneer Rs. 200/ sft.If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge Size: 900 x 2400 (Area upto 2.50 Sqm.) Drawing no A71.102.02.1.05

P/F D2 Single panel Flush door, 40mm thick solid core single shutter finished with 1mm thick laminate (of approved shade)on both sides as per approved drawings, specifications and directions using 200mm x 50mm 1st quality hardwood frame finised in Duco to match the laminate colour and fixed using anchor fastners on either side as per standard procedure,best quality SS door hinges 4 nos of size 125*64*2.5mm including providing Polyvinyl door stopper fixed to skirting/floor mounted, SS finish tubular handle of standard make with mortice lock, 60mm long key cylinder and with hold open door closure. Execution shall be carried out as per approved drawing and direction of E I charge. D2a Door size - 900 x 2100 Location: Toilets & EB Room A71.102.02.1.04 (Area upto 2.00 Sqm.)

(b) D2b Differently abled Toilet Door size - 900x2100 with 32mm dia and 600mm stainless steel coated with nylon grab bar and necessary accessories. Make - Euronics (Area upto 2.00 Sqm.) Execution shall be carried out as per approved drawing and direction of E I charge.

(c) D2c Door size - 900 x 2400. Location Secretary Cabin Toilet. (Area upto 2.50 Sqm.)

(d)D2d Door size - 1030 x 2100. Location Lobby to store (Area upto 2.50 Sqm.)

P/F D3 Single Panel Flush door above, but with 6mm thick glass vision panel of size 1650x250mm with beading all around and wooden strip 12x38 on all sides duco painted/ polished in shade matching Laminate/Veneer ,with 40mm thick solid core single shutter with PU finished 4mm thick Veneer on both sides, best quality SS door hinges 4 nos.,with inbuilt wooden frame in built in wall panel partition Polyvinyl door stopper fixed to skirting/floor mounted, SS finish tubular handle with mortice lock, 60mm long key cylinder and with hold open door closure. Make Dorma -SS finish, (a)D3a Pantry - 900 x 2400 A71.102.02.1.04. (Area upto 2.50 Sqm.) Basic Price of Veneer Rs. 200/ sft.If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge.

(a)D3a Pantry - 900 x 2400 (Area upto 2.50 Sqm.)

(b) D3b Pantry bi fold door - 1360 x 2100 (Area upto 3.00 Sqm.)

(c) D3c Pantry double leaf door double leaf door - 1545 x 2100 (Area upto 3.50 Sqm.)

(d) D3d Pantry double leaf door - 1490 x 2400 (Area upto 4.00 Sqm.)

P/F D5 Two panel Flush door(outward or inward opening based on the condition), 32mm thick solid core single shutter finished with 1mm thick laminate (of approved shade)on one side and PU finished solid teak wood vertical louver of size 20mm x 35mm @ 50mm spacing as per drawings, specifications and directions with inbuilt frame fixed using anchor fastners on either side as per standard procedure,best quality SS door hinges 4 nos including providing Door catch on the inside, SS finish tubular handle with mortice lock, 60mm long key cylinder. Drawing no A71.102.02.1.05 Execution shall be carried out as per approved drawing and direction of E I charge.

(a)D5a VRV double leaf door - 1500 x 2400 (Area upto 4.00 Sqm.)

(b)D5aa DB double door - 1545 x 2400 (Area upto 4.00 Sqm.)

(b)D5aa Sigle leaf door - 770 x 2400 (Area upto 2.00 Sqm.)

(c)D5b Server UPS room entry single leaf door - 1070x2400 (Area upto 3.00 Sqm.)

(d)D5c Electrical riser double leaf - 1800 x 2100 (Area upto 4.00 Sqm.)

(e) D5d Fire shaft door Single leaf door - 1050x2100 (Area upto 2.50 Sqm.)

P/F Anodized/Powder Coated Aluminum work for windows, ventilators with extruded built up standard tubular and other sections of approved made confirming to IS 733 and IS 1285, anodic or transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws, or with fixing clips, or with expansion hold fasteners including necessary filling up the gaps at junctions, Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically, wherever required including cleat angle, Aluminium snap beading for glazing / paneling, CP brass / Stainless steel screws, all necessary hardware fittings all complete as per architectural drawings and as directed The glass should be 5/6mm thick plain glass of MODI/ Saint Gobain or equivalent. Make - SCHUCO /ALuK. Drawing No.A71.102.02.1.07 equi.Execution shall be carried out as per approved drawing and direction of E I charge. 2000mm high 1320 wide - Bottom fixed up to 950mm and Top part as top hung window

STORAGE CABINETS Note: All shutters and doors to be of best quality factory made. All furniture in plywood unless specified Under this subhead, all the elevation of storages shall be measured and paid for.

P/F Full height Storage unit 2700mm(maximum)19mm thk 1st quality commercial ply construction with 12mm thk backing ply to horizontal and vertical divisions as per the drawing/details. All the shutters, drawers, open storage and all exposed surfaces in 1mm laminate and interiors in .8mm thick laminate of approved shade and color. All the visible surfaces - exposed & inside shall be in laminate finish as per approval. All edges will have edge binding tape of matching colour. All the shutters shall have autoclosing hinges and laminate/edge binding on the edges. All shutters shall have superior quality locks as per approval. Hinges Sliders, Drawers, locks and Accessories Make : Hafle / Hettich / FGV. Laminate Make : Greenlam, Merino .Execution shall be carried out as per approved drawing and direction of E I charge.

Office of Members - Storage 1 - 2 nos Size - 4000mm wide 2620 mm high and 475 Deep Drawing no A71.102.01.1.01

(b) Office of Members - Storage 2 Size - 4665mm wide 2620 mm high and 475 Deep Drawing no A71.102.01.3.01

(c)Officer on special duty storage Size - 4665mm wide 2620 mm high and 475 Deep Drawing no A71.102.01.4.01

(d)Office of the Secretary 1 - 475mm deep Drawing no Office of the Secretary - Storage1 Size - 4325mm wide 2620 mm high and 475 Deep Drawing no A71.102.01.5.01

(e)Office of the Secretary - Storage 2 Size - 2535mm wide 2620 mm high and 600 Deep Drawing no A71.102.01.5.01

(f)Office of the Secretary - Storage 3 Size - 1900mm wide 2620 mm high and 600 Deep Drawing no A71.102.01.6.01

Drawing no A71.102.01.6.01 (g)Office of the Secretary 4 - 600mm deep Drawing no A71.102.01.7.01

(h)Office of the Secretary 5 - 600mm deep Drawing no A71.102.01.7.01

P/F low height Storage unit 800mm 19mm thk 1st quality commercial ply construction with 12mm thk backing ply to horizontal and vertical divisions as per the drawing/details. All the shutters, drawers, open storage and all exposed surfaces in 1mm laminate and interiors in .8mm thick laminate of approved shade and color. All the visible surfaces - exposed & inside shall be in laminate finish as per approval. All edges will have edge binding tape of matching colour. All the shutters shall have autoclosing hinges and laminate/edge binding on the edges. All shutters shall have superior quality locks as per approval. Hinges Sliders, Drawers, locks and Accessories Make : Hafle / Hettich / FGV. Laminate Make : Greenlam, Merino.Execution shall be carried out as per approved drawing and direction of E I charge. Office of Members - low height Storage Size - 6650mm wide 750 mm high and 475 Deep Drawing no A71.102.01.2.01

P/F Full height Storage unit as partition with storage and Wall panel for Display on committee room side and seater on pantry side. The partition shall be made in 19 mm 1st quality commercial ply with push-to-open hinged shutters and drawers. All exposed surfaces, inclduing front back and sides in 4mm thk veneer in matt P.U. of approved shade and interiors of storage in.8 mm thick lamiante of approved shade and colour. All edges of shutters to be finished with polished teak wook beadning to match veneer and inside partitions will have edge binding of matching colour to laminate. All the shutters shall have autoclosing push to open hinges as per approval. Hinges Sliders, Drawers, locks and Accessories Make : Hafle / Hettich / FGV. Laminate Make : Greenlam, Merino Veneer Make Greenlam, Uniply, Jacsons, Euro .Execution shall be carried out as per approved drawing and direction of E I charge Committee Room Size - 4740mm wide 2420 mm high and 800 Deep Drawing no A71.102.01.8.01

P/F Full height Storage unit and wall panel for Dispaly in Commission Room in 19 mm 1st quality commercial ply with push-to-open hinged shutters and drawers. All exposed surfaces including sides in 4mm thk veneer in matt P.U. of approved shade and interiors in.8 mm thick lamiante of approved shade and colour. All edges of shutters to be finished with polished teak wook beadning to match veneer and inside partitions will have edge binding of matching colour to laminate. All the shutters shall have autoclosing push to open hinges as per approval. Hinges Sliders, Drawers, locks and Accessories Make : Hafle / Hettich / FGV. Laminate Make : Greenlam, Merino Veneer Make : Greenlam, Uniply, Jacsons, Euro Execution shall be carried out as per approved drawing and direction of E I charge Commission Room Size - 4765mm wide 2420 mm high and 800 Deep Drawing no A71.102.01.9.01

P/F Full height Storage unit 2400mm high 19mm thk 1st quality commercial ply construction with 12mm thk backing ply to horizontal and vertical divisions as per the drawing/details. All the shutters, drawers and all exposed surfaces in PU Finished 4mm Veneer and interiors in .8mm thick laminate of approved shade and color. All the visible surfaces - exposed & inside shall be in laminate finish as per approval. All interior edges will have edge binding tape of matching colour and all exterior in TW beading and polished to approved shade. All the shutters shall have autoclosing hinges and laminate/edge binding on the edges. All shutters shall have superior quality locks as per approval. Hinges Sliders, Drawers, locks and Accessories Make : Hafle / Hettich / FGV. Laminate Make : Greenlam, Merino Veneer Make : Greenlam, Uniply, Jacsons, Euro. Secretary Ante Room Size - 1200mm wide 2420 mm high and 600 Deep Drawing no A71.102.01.13.01 Execution shall be carried out as per approved drawing and direction of E I charge.

P/F low ht.under counter storage unit for Pantry in 19mm thk 1st quality water poof ply construction with 12mm thk ply backing. The horizontal and vertical divisions shall be as per the drawing/details. All the visible surfaces, shutters and drawers, open storage in 1mm laminate & inside shall be in .8mm thick lamiante of approved shade and colour. All edges will have edge binding tape/laminate of matching colour. All the shutters shall have autoclosing hinges and laminate/edge binding on the edges. Hinges Sliders, Drawers, locks and Accessories Make : Hafle / Hettich / FGV. Laminate Make : Greenlam, Merino Execution shall be carried out as per approved drawing and direction of E I charge Secretary pantry Drawing no A71.101.07.1.01

Common pantry Drawing no A71.101.08.1.01

FINISHING

P/A three coats of Premier Emuslion Paint on walls in approved shade to give an even and uniform shade, applied over 2 coats of primer and putty (Make: Birla) as per manufacturer specification fully to give a smooth and even surface including thoroughly brushing the surface free from water / mortar dropping and other foreign matter and sand papered smooth, complete as per manufacturers specifications and as directed. Suggested Brand: Asian Paints. Execution shall be carried out as per approved drawing and direction of E I charge.

P/A flat enamel black paint on exposed GI AC Ducts, pipes, conduits and cable trays etc, in exposed areas of ceiling. Execution shall be carried out as per approved drawing and direction of E I charge.

P/A Metallic finish DUCO paint color as per app. including primer and all subsurface preparation over metal/ wooden sub strata. Suggested Brand : ICI, BELCO or equv .Execution shall be carried out as per approved drawing and direction of E I charge.

P/A Texture paint as per appd. Sample with grooves to be created with 1"masking tape. Suggested Brand: Armour coat, Perlata, Spatula or equiv. Execution shall be carried out as per approved drawing and direction of E I charge.

P/A Grey color Acrylic Emulsion Paint on the Gypsum ceiling and true ceiling in the area where open cell ceiling are provided. The color of the paint to be specified by the Architect.Execution shall be carried out as per approved drawing and direction of E I charge.

FURNITURE/ CARPENTRY

P/F Low height Storage unit 750mm high 450 deep in19mm thk construction with 12mm thk. ply backing. The horizontal and vertical divisions shall be as per the drawing/details. All the visible surfaces - shutters and drawers, open storage in Matt PU finished 4mm Veneer & inside shall be in .8mm laminate finish as per approval. All edges of veneer to have teak wood beadning to match the veneer and laminate will have edge binding tape/laminate of matching colour. All the shutters shall have autoclosing hinges. All shutters shall have superior quality locks and shall have bevelled shutter edge for opening as per drawing and per approval. Note: All shutters and doors to be factory made. Hinges Sliders, Drawers, locks and Accessories Make : Hafle / Hettich / FGV. Laminate Make : Greenlam, Merino Veneer Make Greenlam, Uniply, Jacsons, Euro . Execution shall be carried out as per approved drawing and direction of E I charge.

Secretary Room Size - Size 3800mm x 750mm Drawing no A71.102.01.10.01

Member Chamber Room - Size 2500mm x 750mm - 4nos Drawing no A71.102.01.10.01

F/F Independent Storage unit of 1250mm high in19mm thk construction with 12mm thk. ply backing. The horizontal and vertical divisions shall be as per the drawing/details. All the visible surfaces shutters and drawers, open storage in MAtt PU Finished 4mm veneer & inside shall be in .8mm laminate finish as per approval. Legs made in MS and powdercoated to approved shade. All edges of veneer to have teak wood beadning to match the veneer and laminate will have edge binding tape/laminate of matching colour. All the shutters shall have autoclosing hinges. All shutters shall have superior quality locks and shall have bevelled shutter edge for opening as per drawing and per approval. Note: All shutters and doors to be factory made. Hinges Sliders, Drawers, locks and Accessories Make : Hafle / Hettich / FGV. Laminate Make : Greenlam, Merino Veneer Make Greenlam, Uniply, Jacsons, Euro .Execution shall be carried out as per approved drawing and direction of E I charge Member Chamber Room - Size 2000mm x 1250mm - 4nos Drawing no A71.102.01.11.01

F/F Reception Table of size 2250 x 1200 front with 750mm table fixed drawer unit of size 600 L x 525 D x 675 H with three sets of drawers, keyboard pullouts and CPU platform all in 19mm plywood and 6mm Corian Solid Surface for front sides and table top Finish. All inclusive of necessary locks, handles, other necessary hardware as specified in the design. Hinges Sliders, Drawers, locks and Accessories Make : Hafle / Hettich / FGV. Laminate Make : Greenlam, Merino.Execution shall be carried out as per approved drawing and direction of E I charge. Drawing no A71.102.01.12.01

P/f of Seating, Panelling in 12mm accoustic echo panel of approved colour in pantry constructed of 19mm plywood and necessary framework in polished 4mm veneer of approved shade edge in teakwood beading with necessary metal supports from wall to support the unit. All as per Architectural Drawing. Execution shall be carried out as per approved drawing and direction of E I charge. Execution shall be carried out as per approved drawing and direction of E I charge. Drawing no A71.101.08.1.01

P/P Seater in Pantry 600 wide with with Faux leather upholstreted cushions Execution shall be carried out as per approved drawing and direction of E I charge. Execution shall be carried out as per approved drawing and direction of E I charge

Providing and Fixing in position Below Counter Pantry Storage unit 600mm deep in 19 mm marine ply as per drawing with sliding drawers, front shutters and exteriors finished 1mm laminate of approved shade and colour and interiors in 0.8mm laminate. Cost should include. Hinges Sliders, Drawers, locks and Accessories Make : Hafle / Hettich / FGV. Laminate Make : Greenlam, Merino Execution shall be carried out as per approved drawing and direction of E I charge. Execution shall be carried out as per approved drawing and direction of E I charge.

(a)Secretary Pantry Drawing no A71.101.07.1.01

Common Pantry 1

Common Pantry 2 Drawing no A71.101.08.1.01

Providing and fixing in position Above Counter Pantry Storage unit 450mm deep in 19 mm marine ply as per drawing with all surface finished 1mm laminate of approved shade and colour. Cost should include all hardwares complete. Hinges Sliders, Drawers, locks and Accessories Make : Hafle / Hettich / FGV. Laminate Make : Greenlam, Merino Execution shall be carried out as per approved drawing and direction of E I charge. Secretary Pantry Execution shall be carried out as per approved drawing and direction of E I charge.

Common Pantry

P/f White board Structure in Board room and Engineering Sections with necessary freestanding MS supports from floor to 2150mm height with Ceramic coated glass writing boards of height 1200mm starting from 900mm height from ground and fixed to the metal supports with necessary studs. All as per Architectural Drawing.Execution shall be carried out as per approved drawing and direction of E I charge.

MISCELLANEOUS

P/F Fabric Roller Blinds of approved shade/design. Brand Hunter Douglas/Vista /Mac/ or equiv. (Basic price : Rs.110/sft) If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge.

Providing and Fixing Fabric single Track curtains of approved shade/design with motorised single track or equiv. (Basic price of Fabric Rs.500/rm) If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F Niche for keep markers and duster for the Glass Writing Board (450mm width x 75mm depth x 125mm ht.) with 12mm thk commercial ply, finished with 6mm thk Corian as/app, fixed in locations as per design with necessary supports. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F powdercoated perforated dustbins, 10"x15" without lid, Square/circle Perforations as approved Execution shall be carried out as per approved drawing and direction of E I charge.

SS Garbage Bins @ 750ht (120 Litres) for Pantries, breakout, cafeteria etc as per approval. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F SS Tray bent as per design to keep markers and duster for the Glass Writing Board & Marker panel, with fixing arrangement to fix on to the partition groove. Size 200x150 mm .Execution shall be carried out as per approved drawing and direction of E I charge.

P/F 3mm thk Satin finish S.S Transition profiles, as per design, drg. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F 20x3mm thk S.S strip at the junction of different flooring material Execution shall be carried out as per approved drawing and direction of E I charge.

P/F PVD Jambs of 1mm thk hairline sheet fixed to partition of following widths & bent on both the edges/sides as required. This shall be stuck to the sub surface with suitable adhesive. Execution shall be carried out as per approved drawing and direction of E I charge. Entry door - 300mm wide 2700mm

Graphic/Storage - 475mm wide 2700mm

Lift - 300mm wide

P/F Step up Entrance Matting Make Bottom line or Equivalent Execution shall be carried out as per approved drawing and direction of E I charge.

P/F Enviro seal -2400 mm long for glass door corner. Execution shall be carried out as per approved drawing and direction of E I charge.

Providing and fixing proprietry anodised aluminium AC grill made of 20mm wide and 2mm slats of approved shade and colour to a height of 700mm and along the length of the wall as shown in the drawings. Rate to include necessary fixing of the grill using clips and support from rear of the grill to avoid visible fixing details Execution shall be carried out as per approved drawing and direction of E I charge.

Anti-termite and fire related Post construction/Anti termite control treatment at all wall/partitions & floor junctions & at locations called for. Total carpet area Execution shall be carried out as per approved drawing and direction of E I charge. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F 3M/HILTI Fire mortar to seal the opening required to the passage of cables through walls/slab Execution shall be carried out as per approved drawing and direction of E I charge.

P/F Promaseal fire mortar of lightweight hydraulic cement composition. BS:476 PART-20 -Fire mortar shall be packed in bags blended ready for mixing with 12-16 Lts of water.20kg of powder will produce appro-35 lts of mix which will fill an area of 0.325 sqmt 100mm depth for fire rating Execution shall be carried out as per approved drawing and direction of E I charge. SIGNAGE

P/F Corporate Signage with Logo & Lettering made in Cast Aluminium Powder Coated letters and fixed to partition/glass partition/wall without showing any screw heads. Execution shall be carried out as per approved drawing and direction of E I charge. Overall size :1800mm long

P/F Signage plates in SS sheet with name etc. etched in colour on it, in following sizes : Execution shall be carried out as per approved drawing and direction of E I charge. Rectangular -50 x 200 mm Overall size :1800mm long

Push & pull S.S brushed plate with black engrave in the glazed doors as per the design drg. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F Toilet Signages with SS plate & black engraving of size 5"x7" Execution shall be carried out as per approved drawing and direction of E I charge. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F SIGNAGE PLATE FOR WASH ROOMS of size of: 157mm X 157mm Comprising of Anodized Aluminum fascia with recessed, toughened ABS plastics frame members with graphics. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F SUSPENDED SIGN FOR FIRE EXIT. DIMENSIONS: 157mm X 605mm Comprising of Anodized Aluminum facia with recessed, toughened ABS plastics frame with suspension kit & graphics as per fire safety standards Execution shall be carried out as per approved drawing and direction of E I charge. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F Room signage FOR CABINS and Meeting Rooms. Size as app shop drawing Comprising of 61mm (h) x 157mm(w) Header Panel with Anodized Aluminium facia & 93mm x157mm Paper insert with recessed, toughened ABS plastics frame members with graphics. Execution shall be carried out as per approved drawing and direction of E I charge.

RESTROOMS / CAFE

P/F Toilet Counter (600 deep x 150 facia) as per drawing with appropriate MS framework of counter top finished with 12mm thick Kalinga stone Quartz. including making holes with neatly finish for wash basin and bin. Execution shall be carried out as per approved drawing and direction of E I charge. (a)Ladies Rest Room - one side facia

(b)Men's Rest room - 3 sides facia

P/F 12 mm Solid Surface (approved make and color) counter/ledge in Pantry counter,with necessary adhesive and joined neat, including making holes for wash basin (under counter) including edge finishing around basin and edge molding as per Drawing and approved sample of molding. (Basic cost Dupont Corian Rs. 500 / sft) If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge. Execution shall be carried out as per approved drawing and direction of E I charge.

Same as above but with 19mm thk Granite Counter in Pantry - Basic price of grantie Rs.250 /sqft. If the basic rates differ by (+-10%), then necessary adjustment shall apply. Execution shall be carried out as per approved drawing and direction of E I charge. Execution shall be carried out as per approved drawing and direction of E I charge.

P/F Ready to Install Partition system for Toilet ( WC) Cubicles comprising of 12mm thk compact laminate, both sides decorative, nylon fittings and pipes & clamps etc. fixed rigidly to the Floor along with 600 wide Door Shutter with simple "occupied/vacant " latch inside for each WC cubicle. The Door will include providing for enviroseal/ brush in the shutter. Price to include all necessary fixing and grouting at site. Quote Per Cubicle. suggested make:/ Greenlam - Evergreen classique. Basic price 22000/ Cubical .Execution shall be carried out as per approved drawing and direction of E I charge. List of All Accessories: Standard – Stainless Steel (304 Grade) a) Gravity hinges (Right /Left) b) Coat Hook with door Stopper. c) Door Knob d) Lockset with indicator e) Adjustable leg f) U channel g) Toprail hollow circular pipe. h)Corner Connector i)Wall Bracket j) Screws & Wall Plugs k)Noise Deafening tapes for grooves in doors & Pilasters. Door Size : 750mm wide Overall Height of cubicles : 2100mm Thickness of Compact Laminate : 12mm If the basic rates differ by (+-10%), then necessary adjustment shall apply.

P/F Mirror paneling, 5mm thk Mirror stuck over Waterproof 12mm ply with appropriate 3M Tape/ adhesive as per dwg. Cost to include base made of waterproof ply/ board Execution shall be carried out as per approved drawing and direction of E I charge. Execution shall be carried out as per approved drawing and direction of E I charge. Drawing No. A71.102.01.24.01 (a)Ladies Rest Room - 1735 x 900

(b)Men's Rest room - 2490 x 900

(c)Differently abled Toilet - 600 x 900

(d)Unisex toilet - 600 x 900

(e)Unisex toilet - 600 x 900

(f) Ante Space - 690 x 2050

P/F Mirror boxing, with mirror 5mm thk stuck over Waterproof 12mm ply with appropriate 3M Tape/ adhesive and SS Studs in the corners and as/ dwg. Cost to include 3 inch thick boxing in 12mm waterproof ply with concealed cove light top and bottom as per detail drawing. Execution shall be carried out as per approved drawing and direction of E I charge Drawing No. A71.102.01.24.01 (a)Ladies Rest Room - one side facia

(b)Men's Rest room - 3 sides facia

(c)Differently abled Toilet

(d)Unisex toilet

Civil Work: Execution shall be carried out as per approved drawing and direction of E I charge Mandatory note : All masonry work to have 150mm (min) ht lintel at 2100/2400mm ht as approved by architect.

Providing and fixing 150 wide 24 gauge 18mm size galvanized chicken wire junctions of concrete and brick walls and other locations.

Demolition and dismantling of existing brick work concrete etc to align with layout Mandatory note : All masonry work to have 150mm (min) ht lintel at 2100/2400mm ht as approved by architect.

Construction of 100mm thk AAC HQ Aerocon wall with cement mortor 1:4 with necessary hoop iron reinforcement including scaffolding, curing etc., as per design drawing. Execution shall be carried out as per approved drawing and direction of E I charge.

Hacking/chipping of existing flooring & finishing the same with IPS flooring i.e Plain cement concrete (max 4") of ratio 1:2:4 (1 cement:2 coarse sand: 4 aggregate) including pvc strips to form 3 sqm average panels where ever required to lay hard flooring/pebble flooring/cover raceways.The finished surface should be devoid of any undulations. (The existing PCC shall be cut up as per marking of raceways/conduits & new raceways laid and levelled up with fresh PCC)

Dismantling the existing Brick / Aerocon wall and removal of malba from the Site. Note: The existing door to be removed without any damage and stored it as per client instruction

Providing and laying average 30-50mm thick leveling screed of M 20 Grade screed hand mix concrete for IPS flooring and finishing. The work shall include surface hacking, cleaning.

Mandatory note : The BOQ, drawings and material availability to be studied by the contractor and any issues to be raised during the pre-bidmeeting. Client/Architect reserves the right to operate any item or items given as options & hence the rate shall be quote accordingly.. All masonry work to have 150mm (min) ht lintel at 2100/2400mm ht as approved by architect. Construction of 100mm thk AAC HQ Aerocon wall with cement mortor 1:4 with necessary hoop iron reinforcement including scaffolding, curing etc., as per design drawing. Execution shall be carried out as per approved drawing and direction of E I charge.

Construction of 150mm thk AAC HQ Aerocon wall with cement mortor 1:4 with necessary hoop iron reinforcement including scaffolding, curing etc., as per design drawing. Execution shall be carried out as per approved drawing and direction of E I charge.

Construction of 200mm thk AAC HQ Aerocon wall with cement mortor 1:4 with necessary hoop iron reinforcement including scaffolding, curing etc., as per design, drawing. Execution shall be carried out as per approved drawing and direction of E I charge.

Half Brick masonry with bricks of class, designation 75 in superstructure above plinth level in cement mortar 1:4 (1 cement : 4 coarse sand) in any shape, size etc. Including providing and placing in position 2 nos. 6mm dia.bars at every 900mm lvl of half brick masonry. Execution shall be carried out as per approved drawing and direction of E I charge.

Providing and Applying 12mm thick cement plaster on the wall of mix 1:6 (1 cement : 6 fine sand).

Light weight filling for hard flooring areas like reception, toilet, passages, cafeteria, etc using Hemalite as per the standard specs.. i.e filling of flooring using Hemalite light weight concrete consisting of 3 bags of Hemalite and 1 bag of cement in dry form mixed for 3 times with 65 lts of water poured into the dry mix and further mixed for 3 times to get a homogeneous concrete. The homogeneous concrete should be filled for a maximum of 150mm (6 inches) and it should be pressed with wooden plank.If the thickness to be filled in is above 150 mm then it should be laid in layers of 150 mm. Immediately after filling up to the required level a sand and cement dry mix in the proportion of 1:4 by volume should be spread out on the wet Hemalite light weight concrete for 5-6mm (rough cast) to close the voids and it should be kept in safe for minimum of 2 days

Lightweight Cinder filling (instead of Heamalite filling) for 125-150mm thickness

Providing and Laying in position machine batched, machine mixed and machine vibrated design mix cement concrete structural elements including the cost of nominal reinforcement, centring, shuttering and finishing M 20 grade reinforced cement concrete.

Providing and applying water proofing treatment on sunken / raised areas of toilets, etc. with three coats of tapecrete/forsroc and sealing all junction, corners and joints of pipes after first coat with epoxy mortar as per approved specifications of the specialist agency including providing 10 years written guarantee against any defects and leakage. (Tapecrete/forsroc is polymer modified cementious material being manufactured in collaboration with FRC Composities Ltd. Canada. It shall have low permeability with a high resistance to cracking.the rate to include the cleaning of existing GI / PVC pipes etc.

Sanitary Installation Internal Water Supply & Drainage BOQ PART A SANITARY WARES: Execution shall be carried out as per approved drawing and direction of E I charge

Supply and fixing in position Kohler Span Round Urinal Wall mounted model no 26475IN-ER-0 with all accessories, hardwares and all gaps to be sealed with chemical sealant etc. complete.

Supply and Fixing in position Euronics Urinal Flusher, EU44E with actuation plate within the full height ledge wall with all accessories, hardwares etc. complete.

Supply and fixing, Merino urinal partition fixing to wall dado using 4 nos. of suitable chromium plated brackets with C.P. bolts, nuts, washers, cutting to required shape, with approved pattern etc. complete. (Sample of material to be produced for approval by project manager.

Supply and fixing in position Kohler Ladena Under counter model no 2215IN-2-0. with all accessories, hardwares and all gaps to be sealed with white cement mortar etc. complete. (Ladies and Mens Bathroom)

Supply and fixing in position Kohler Forefront Wall mounted model no 2660IN-1-0. with all accessories, hardwares and all gaps to be sealed with white cement mortar etc. complete.

Supply & Fixing, Mirror made out of Imported plate glass 5 to 5.5 mm thick, making holes at corners, providing 40mm long Chromium plated detachable head screws providing 12mm thick commercial plywood to back of Mirror, apply 2 coats of enamel paint over 1 coat of primer to surfaces of wood, installing the Mirror over tile dado using required fixing materials etc. complete.

Supply and fixing in position stainless steel kitchen sink 304 grade Franke make CUX11021 on the pantry counter with all accessories, hardwares and all gaps to be sealed with chemical sealant etc. complete.

Providing and Fixing in position Gebrit concealed cistern within the full height ledge wall with cover plate of of approved shade and all accessories, hardwares etc. complete.

ACCESSORIES AND CHROMIUM PLATED BATHROOM FITTINGS

Supply and fixing Following chromium plated bath room fittings of "Jaquar"make / approved make - Florentine range, connecting to water pipe using teflon tape over threaded portions, Including supplying and fixing CP Nipples to connect the water supply pipe to CP fittings, testing for leak proof,etc complete. Supply and fixing, (Florentine Range) Long Neck Pillar cock with aerator. Make : Jaquar Catalogue No : FLR-5021M

Supply and fixing, (Allied Range) 15mm dia Rinsing spray with bracket and 1250mm.plastic tube (Health Faucet) long threads. Make : Jaquar Catalogue No : ALD-573

Supply and fixing, (Florentine Range) 15mm dia Angle valve stop cock long inlet threads with wall flange. Make : Jaquar Catalogue No : FLR-5053N

Supply and fixing, (Allied Range) 32mm dia Bottle trap with extension piece & connecting Hose. Make : Jaquar Catalogue No : ALD-769L

Supply and fixing heavy quality 32mm dia waste coupling with dome grating fixing to urinals - produce sample for approval. Make : Viking

Supply and fixing, (Allied Range) 32mm dia C.P brass waste coupling. Make : Jaquar Catalogue No : ALD-705

Supply and fixing, (Continental Range) chromium plated Double coat hook with suitable brass screws etc. Catalogue No : ACN-1161N

Charges for fixing, (Florentine Range) 15mm dia Sink cock with Regular Swinging spout (Wall Mounted Model) with wall flange etc. complete. Make : Jaquar Catalogue No : 5347N

Supply and fixing, (Continental Range) chromium plated Towel rail 300mm long and 20m dia with cp brackets fixing in position using suitable C.P. screws, peak wood plugs etc., complete. Make : Jaquar Catalogue No : ACN-1101S

Supply and fixing, (Continental Range) Soap dispenser with 500ml liquid soap, fixing the same over wall dado using required fixing materials,etc.,complete. Make : Jaquar Catalogue No : ACN-1137N

Supply and fixing, (Hand dryers - Flash) fixing the same over wall dado using required fixing materials with approved make etc., complete. Make : Jaquar Catalogue No : HDR-SSF-AK2807

Supply and fixing, (Continental Range) Paper Roll holder with flap, fixing the same over wall dado using required fixing materials etc.,complete. Make : Jaquar Catalogue No : ACN-1153S

Supply and fixing, Kimberly clark or equal approved make Towel dispenser fixing the same over wall dado using required fixing materials,etc.,complete. Make : Kimberly clark Product code : 02010

Supply and fixing, 15mm size Braided hose pipe with nuts, washers, etc., for connecting outlet of angle valve stop cock to pillarcock, flushing cistern etc.,

Supplying, and fixing of Grab bar for Differently Abled Toilets S.STEEL GRAB RAIL (2 Nos) (600 MM) SWING HANDICAP GRAB BAR (2 Nos) - S.STEEL Make : Euronics Product code : 02010

PART B SOIL, DOMESTIC WASTEWATER AND VENT PIPE WORKS: Execution shall be carried out as per approved drawing and direction of E I charge

Supply and fixing, ASTRAL / FINOLEX / SUPREME make PVC SWR grade Pipes of type B class and Supreme or equal approved make PVC Pipe specials like bends, Tee, Y-junction with or without door, Vent cowl, providing and fixing cleaning / rodding eye with endcap wherever required, etc., cutting the pipes, laying or fixing to perfect plumb, with slopes where required, making joints using solvent cement solution or with ring seal couplers of size available pipe of 110mm and 75mm dia., providing 110 dia PVC make up piece with inlet connections, conducting water test for leak proof joints and the materials, etc., complete. I. PIPES INSIDE TOILET AREAS Using 32mm dia pipe - IS 4985 (6kg Class) For branch vent

Using 40mm dia pipe - IS 4985 (6kg Class) For vent at ceiling

Using 40mm dia pipe - IS 4985(10kg class) for wash basin (Concealed in wall)

Using 50mm dia pipe - IS 4985(10kg class) for urinal (Concealed in wall)

Using 75mm dia pipe - (6kg class) for toilet wastewater pipe

Using 110mm dia pipe - (6kg class) for toilet soil pipe II. PIPES IN SHAFT

Using 63mm dia pipe - IS 13592 (SWR - TYPE 'B' Class) For Vent

Using 75mm dia pipe - IS 13592 (SWR - TYPE 'B' Class) for toilet wastewater pipe

Using 110mm dia pipe - IS 13592 (SWR - TYPE 'B' Class) for toilet soil pipe

Supply and fixing, approved make 110mm dia PVC factory made Floor trap with water seal of 50mm and having multiple inlets and 75 dia outlet, fixing in position, laying cement concrete to 75mm alround in 1:3:6 mix using brick jelly to full depth of trap / sump, supplying and fixing SS grating of suitable size over trap / sump at 4mm below Floor level testing to water tightness, including providing fiber glass mating at bottom, inlet and outlet etc. complete.

Supplying and fixing, approved make (Fabricated) PVC "Deep seal ‘P’ Trap" with 50mm water seal and vent horn, and 100mm dia outlet fixing to a perfect position, laying cement concrete alround in 1:3:6 mix with 20mm size stone jelly, providing and fixing suitable size SS grating with frame in PVC, providing 110mm dia PVC pipe over trap to make up the level of platform for Urinal portion, cutting concrete or making holes, restoring the damaged portion to their original condition etc. complete.

Supplying and fixing, Pan connector made out of PVC with 110 or 90 or 75mm dia outlet, fixing to pipe work with rubber ring and other necessary materials, testing, to water tightness etc. complete.

Providing and laying concrete with 1:4:8 mix using 20mm size stone aggregate all around for buried soil and waste pipes including centring and shuttering and any mansory supports from slabs or firm ground, curing complete for the pipes including providing and removing temporary form work etc. complete. 75mm nominal dia pipe 75mm thick alround

110mm nominal dia pipe 75mm thick alround

Supplying and fixing floor clean-out using necessary items including providing brass threaded end cap, fixing the top of clean-out in line with adjacent fininished floor level inside toilet, providing allen-key arrangements for easy removal of clean-out etc., complete. (110mm & 75mm size)

PART C INTERNAL DOMESTIC WATER SUPPLY PIPEWORK:Execution shall be carried out as per approved drawing and direction of E I charge INTERNAL WATER DISTRIBUTION SYSTEM Supplying and fixing, Astral/ Ashirwad or equal approved make CPVC pipes (sdr 13.5 grade) and pipe specials like Coupler, reducer, elbow, tee and brass male/ female threaded pipe specials to connect bath room fittings, union, by pass bend with all type of Special flanges and special fittings to connect with de-similar materials like G.I or any other material, cutting the pipes, fixing the pipe specials using solvent cement solution supplied by the same manufacturer, making water tight joints, making holes and cutting grooves in walls restoring the damaged portions to their original condition using required materials, conducting hydraulic test to pipe work to a pressure of 7 Kg per Sq.cm, etc. complete and as directed by the site engineer. (Please note that the mentioned diameters are ID.) I. DOMESTIC WATER SUPPLY

Using 15mm dia (ID) pipe. (Concealed & Exposed pipe Inside toilet)

Using 20mm dia (ID) pipe. (Concealed & Exposed pipe Inside toilet)

Using 25mm dia (ID) pipe. (Concealed & Exposed pipe Inside toilet)

Using 32mm dia (ID) pipe. (Concealed & Exposed pipe Inside toilet) II. TREATED EFFLUENT SUPPLY

Using 15mm dia (ID) pipe. (Concealed & Exposed pipe Inside toilet)

Using 20mm dia (ID) pipe. (Concealed & Exposed pipe Inside toilet)

Using 25mm dia (ID) pipe. (Concealed & Exposed pipe Inside toilet)

Using 32mm dia (ID) pipe. (Concealed & Exposed pipe Inside toilet)

Supplying and fixing, approved make CPVC union, testing for leak proof, etc. complete. 20mm dia

25mm dia

32mm dia

Supplying and fixing, RB or equal approved make Brass body nickel plated with stainless steel ball, lever operated Ball Valve, fixing to pipe work with required fixing materials, testing, etc., complete. Using 20mm dia Ball Valve.

Using 25mm dia Ball Valve.

Using 32mm dia Ball Valve.

PART D MISCELLANEOUS WORKS

Fabricating brackets using Mild Steel flats or angles, cutting, welding, forming shapes, providing hot dip galvanizing for brackets, cutting pockets in masonry / concrete surfaces, grouting brackets in concrete of 1:2:4 mix, restoring the damaged portion to their original condition required materials etc. complete.

Schedule for Electrical Works SUB HEAD - I - EI & FANS LT Panels PANEL 1

MCB DBs and MCBs / RCCBs Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (M/s L&T/Ligerand/ Schneider or SS make) 4way(4+12),Doubledoor

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distributionboard, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator) (M/s L&T/Ligerand/ Schneider or SS make) 8way(4+24),Doubledoor

4way(4+12),Doubledoor

Supply and fixing of 63 amps rating, four pole,415 volts, MCB in the existing MCB DB complete with connections, testing and commisioning etc. as required. (M/s L&T/Ligerand/ Schneider or SS make)

Supply and fixing of 32 amps rating, four pole,415 volts, MCB in the existing MCB DB complete with connections, testing and commisioning etc. as required. (M/s L&T/Ligerand/ Schneider or SS make)

Supplying and fixing following rating, double pole,(single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30mA in the existing MCBDB complete connections, testing and commissioning etc. as required.(M/s L&T/Ligerand/ Schneider) 40 amps

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuitbreakersuitablefor inductiveload of followingpoles in the existing MCB DB complete with connections, testing and commissioninq etc. as required. (M/s L&T/Ligerand/ Schneider or SS make) Double pole

Single pole

Mains Wiring Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required ( Makes Polycab/Powerflex/RR Kabel or SS make ) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. ( Makes Polycab/Powerflex/RR Kabel or SS make ) 7 x 4 sq. mm

Wiring for circuit/submain wiring 5 runs of 4 sqmm FR PVC insulated copper conductor single core in recessed Steel conduit along with 2 Runs. of 2.5 sqmm FR PVC insulated copper conductor single core cable for earthing as required ( Makes Polycab/Powerflex/RR Kabel or SS make )

POINT WIRING Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Makes 1. Wires-Polycab/Powerflex/RR Kabel or SS make ,2. Conduit- Essorke/Avonplast/Aeroplast or SS make, Switch - Anchor/ Jeeva/ Roma/Crab Tree/North West) Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Makes 1. Wires-Polycab/Powerflex/RR Kabel or SS make ,2. Conduit- Essorke/Avonplast/Aeroplast or SS make, Switch - Anchor/ Jeeva/ Roma/Crab Tree/North West)

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. ( Makes 1. Wires-Polycab/Powerflex/RR Kabel or SS make ,2. Conduit- Essorke/Avonplast/Aeroplast or SS make) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (Lighting circuit)

Power Wiring Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. ( Makes 1. Wires-Polycab/Powerflex/RR Kabel or SS make ,2. Conduit- Essorke/Avonplast/Aeroplast or SS make) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Switches and Scokets

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6pin 5/6 & 15/16A modular socket outlet and 15/16A modular switch, connections etc.as required. ( M/s Anchor/ Jeeva/ Roma/Crab Tree/North West)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3pin 5/6 modular socket outlet and 5/6A modular switch, connections etc.as required. ( M/s Anchor/ Jeeva/ Roma/Crab Tree/North West)

UPS WIRING Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.( M/s Polycab/Powerflex/RR Kabel or SS (a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Switches and Sockets Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ( M/s Anchor/ Jeeva/ Roma/Crab Tree/North West) (a) 5/6 amp switch

(b) 15/16 amp switch (White)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. ( Make-Anchor/ Jeeva/ Roma/Crab Tree/North West) (a) 6 Module (200mmX75mm)

b) 8 Module (125mmX125mm) MV Cables and Terminations (Makes 1. Cable - Polycab /Gloster/Universal 2. End Termination- Gemsons/Commet/Dowells)

3.5 Core 35 Sq.mm XLPE FRLS ZH A2XFY, 1.1 KV grade Aluminium cable

4 Core 10 Sq.mm XLPE FRLS ZH XFY, 1.1 KV grade Al.cable

4 Core 6 Sq.mm XLPE FRLS ZH XFY, 1.1 KV grade Al.cable

FLEXIBLE CABLE 3Core 4 Sq.mm Copper Flexible Cable (Raw Power)

3Core 2.5 Sq.mm Copper Flexible Cable (UPS Power)

End termination and connection of XLPE (FRLS) aluminium / copper conductor armoured UG cable including supply of double compression, type tinned brass cable glands, suitable size tinned copper criumping type lugs, including gland earthing as required. (a) 3.5 Core 35 Sq.mm XLPE FRLS ZH A2XFY, 1.1 KV grade Aluminium cable

b) 4 Core 10 Sq.mm XLPE FRLS ZH XFY, 1.1 KV grade Al.cable

c) 4 Core 6 Sq.mm XLPE FRLS ZH XFY, 1.1 KV grade Al.cable

FLEXIBLE CABLE 3Core 4 Sq.mm Copper Flexible Cable (Raw Power)

3Core 2.5 Sq.mm Copper Flexible Cable (UPS Power)

PVC / STEEL CONDUITS ( Make M/s Essorke/Avonplast/Aeroplast or SS make) Supplying and fixing of followimg size of PVC conduit along with accessories in recess including cutting the wall and making good the same in case of recessed conduit as required ( Makes as mentioned in NIT) i) 32 mm

Supplying and fixing of followimg size of Steel conduit along with accessories in recess including cutting the wall and making good the same in case of recessed conduit as required( Makes as mentioned in NIT) i) 32 mm

Aluminium Race Ways Supplying, laying, connecting the Aluminum Raceways laid in the Floor with all necessary clamp, screws etc., including Cutting, breaking and removing debaris and plastering with chicken mesh for floor raceways and necessary civil works ( Makes as mentioned in NIT) a) 40 x 38mm.

Junction Box Supplying, erecting 14Gauge thick Junction boxes with cover of 50mm. height to suit as per site conditions. The Junction boxes shall be powder coated type and fixed flush with the wall / floor

Perforated Cable Tray - Laid on Ceiling (Makes - M/s MEM/Bharti/Ratan/Slotco/Profab) Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. a) 150mm Width x 50mm Height

b) 300mm Width x 50mm Height

Data & Telephone Wiring ( Mkes- M/s Polycab / RR Kable / POWERFLEX or SS Make) Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.(1 run of cable)

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. (1 pair)

Supply and wiring with 50 pair telephone cable in the existing conduit. As per the manufacturer specification and as per the direction of engineer incharge.

Supply and providing RJ 45 data terminal unit in GI consealed box. As per the manufacturer specification and as per the direction of engineer incharge.

Supply and providing RJ 11 telephone terminal unit in suitable GI consealed box. As per the manufacturer specification and as per the direction of engineer incharge.

Supply and providing HDMI terminal unit in suitable consealed box. As per the manufacturer specification and as per the direction of engineer incharge.

Supply and wiring 50Pair KRONE Connector Box. As per the manufacturer specification and as per the direction of engineer incharge.

Earthing Supply and laying of following types of earthing conductor and inter connecting the equipments, DBs, Switch boards including earth pit. GI Pipe Electrode Supply & construction of Earth pit with 40mm Dia 4.5 m length GI . Pipe electrode with masanary chamber, earth treating media, funnel, masanary work with cover slab complete as per IS 3043. As per DSR(E) of CPWD and as per the direction of engineer incharge. (with charcoal or coke and salt) as required.

Copper earth plate electrode Earthing with copper earth plate 600mm x 600 mm x 3 mm thick including accessories and providing masanary enclosure with cover plate having locking arrangement and watering pipe etc (with charcoal or coke and salt) as required.

Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required.

Supplying,laying, testing and commissioing of 6 SWG copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submains / cables

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying,laying, testing and commissioing 16 Sq.mm copper wire on surface or in recess for connections etc. as required.

Light Fitting / Fans - ERECTION ONLY 15W RECESSED DOWNLIGHT Supply and fixing of Recessed downlight with 15W NW40K IP20 Beam Direction 34°(WD) - Fixed - Non Dimmable Dia - 88mm, H - 125mm, Cut Dia - 83mm Die Cast Aluminium housing with White powder coated finish. Make - Abby / Similar or Superior make Lamp - 15w LED 4000k

14W RECESSED DOWNLIGHT Supply and fixing of Recessed downlight with 14W NW40K IP20 Beam Direction 78° - General Diffuse Fixed - Non Dimmable Dia - 140mm, H - 92mm, Cut Dia - 132mm Die Cast Aluminium housing with White powder coated finish. Make - Abby / Similar or Superior make Lamp - 14w LED 4000k

3W RECESSED DOWNLIGHT Supply and fixing of Recessed downlight with 3W NW40K IP20 Beam Direction 28°(SS) - Fixed - Non Dimmable Dia - 30mm, H - 18mm, Cut Dia - 26mm Milled Aluminium housing with White powder coated finish. Make - Abby / Similar or Superior make Lamp - 3w LED 4000k

8W RECESSED DOWNLIGHT Supply and fixing of Recessed downlight with 8W NW40K IP20 Beam Direction 33°(MD) - Fixed - Non Dimmable Dia - 88mm, H - 125mm, Cut Dia - 83mm Milled Aluminium housing with White powder coated finish. Make - Abby / Similar or Superior make Lamp - 8w LED 4000k

52W RECESSED 619mm dia DOWNLIGHT Supply and fixing of Recessed downlight with 52W NW40K IP20 Beam Direction 95° - General Diffuse Fixed - Non Dimmable Dia - 619mm, H - 75mm, Cut Dia - 605mm Extruded and sheet aluminium housing with White powder coated finish. Make - Abby or equivalent Lamp - 52w LED 4000k

SURFACE MOUNTED FIXTURE Supply and fixing of Surface mounted downlight with 3W NW40K IP20 Beam Direction 28°(SS) - Fixed - Non Dimmable Dia - 30mm, H - 18mm Milled Aluminium housing with White powder coated finish. Make - Abby / Similar or Superior make Lamp - 3w LED 4000k

48V MAGNETIC TRACK Supply and fixing of Recessed 48V Magnetic Track with required accessories & 48V Power Supply H - 54mm, W - 36.5mm, Cut out - 26.5mm Die cast aluminium profile with Black powder coated finish Make - Abby / Similar or Superior make Accessories Live Feed

Straight Coupler- Flexible link

Endcap

Power Supply - 150w 48v

48V MAGNETIC TRACK

18W LINEAR LIGHT Supply and fixing of linear light to 48V - Magnetic Track with 18W NW40K IP20 Beam Direction 112° - Fixed - Non Dimmable L - 890mm, W - 23mm, H - 28mm Extruded aluminium housing with Black finish. Make - Abby / Similar or Superior make Lamp - 18w LED 4000k

10.8W TILTABLE SPOTLIGHT Supply & fixing of adjustable and tiltable spotlight to 48V - Magnetic Track with 10.8W NW40K IP20 Beam Direction 36°(WD) - Adjustable & 355° Swivel & 90° Tiltable - Non Dimmable H - 100mm, Dia - 40mm Die cast aluminium housing with Black powder coated finish - Make - Abby / Similar or Superior make Lamp -10.8w LED 4000k

12.6W FIXED LINEAR SPOT Supply and fixing of linear spot to 48V - Magnetic Track with 12.6W NW40K IP20 Beam Direction 48°(WD) - Fixed - Non Dimmable L - 365mm, W - 23mm, H - 28mm Extruded aluminium housing with Black finish. Make Abby / Similar or Superior make Lamp - 12.6w LED 4000k

STRIP LIGHT WITH ALUMINIUM PROFILE Supply and fixing of Surface mounted aluminium profile with reqiured accessories & 8mm Strip 180 LED 14W/M NW40K IP20 & 24V Power Supply Profile Dimension W - 17mm, H - 18.92mm. Make - Abby / Similar or Superior make Lamp - 14w/m LED 4000k AI. Profile Grazer Profile with diffuser Power Supply - 120W 24V - On&Off

Power Supply - 180W 24V - On&Off

STRIP LIGHT WITH ALUMINIUM PROFILE

36W SURFACE MOUNTED TUBE LIGHT Supply and fixing of Surface mounted Tube Light with 36W WH60K IP20 Beam Direction Fixed- Non Dimmable L - 4ft Poly Carbonate with White finish. Make LEDOS / Philips/ Osram /Similar or Superior make Lamp - 36w LED 6000k

UPS Supplying and fixing of 2 x 7.5kVA in Parallel Redundant , 415 volts, 50Hz on line UPS (30 minutes backup). UPS suitable for Light and Computer ( Makes - PC Socomac / Abb / Schneider or SS make)

SUB HEAD - II - Air Conditioning Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow /Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R410A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V+/-10%, 3Phase, 50 Hz AC power supply.The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 . ( Makes - Mitsubishi / CARRIER / MIDEA/ DAIKIN/TOSHIBA) a) Side Discharge 10 HP

Side Discharge 12 HP

SUPPLY OF VRV/ VRF INDOOR UNITS WITH NECESSARY REMOTE, RECEIVER, PANEL & OTHER ACCESSORIES ( INBUILT DRAIN PUMP ) Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multi speed motor, coilsection with DX copper coil, electronic expansion valve, outer cabinet, cordless remote control, drain pan, necessary accessories etc., suitable for operation on 230V±10%, 50Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature - 1 TR ( Makes - Mitsubishi / CARRIER / MIDEA/ DAIKIN/TOSHIBA) a) 1 TR

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with lownoise fan/dynamically balanced blower, multi speed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cordless remote control etc., suitable for operation on single phase 230V±10%, 50Hz AC supply, complete, asr equired. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit wil lbe at air inlet conditions of 27Degree C DB and19 Degree C WB temperature. ( Makes - Mitsubishi / CARRIER / MIDEA/ DAIKIN/TOSHIBA) a) 3.2 TR

b) 4 Way Cassette - 4.6 TR

c) Ceiling Concealed - 1.6 TR

d) Ceiling Concealed - 2.6 TR

e) Ceiling Concealed - 3.2 TR

f) Ceiling Concealed - 4.6 TR

SITC OF INDIVIDUAL SPLIT DX UNIT FOR SERVER ROOM ( Makes - Mitsubishi / CARRIER / MIDEA/ DAIKIN/TOSHIBA) 2.0 TR - Hi wall unit

Refrigerant Copper Piping (Makes - Uniflow, Nippon, Rajco, Mandev, Totaline ) Supply,Installation,testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VR F system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cellelastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquidlines,all accessories as pe rcc specifications etc. as required : a) 28.58mm dia (OD) (Hard drawn) with tube thickness1.2mm with 19mm thick insulation

b) 25.4mm dia (OD) (Harddrawn) with tube thickness1 .2mm with19mm thick insulation

c) 22.2mm dia (OD) (Hard drawn) with tube thickness1.2mm with 19mm thick insulation

d) 19mm dia (OD) (Hard drawn) with tube thickness 1.2mm with 19mm thick insulation

e) 15.86mm dia (OD) (Hard drawn) with tube thickness 1.2mm with 19mm thick insulation

f) 12.7mm dia (OD) (Hard drawn) with tube thickness 1.2mm with 19mm thick insulation

g) 9.5mm dia (OD) (Hard drawn) with tube thickness 1.2mm with 19mm thick insulation

h) 6.4mm dia (OD) (Hard drawn) with tube thickness 1.2mm with 19mm thick insulation NOTE:-1)The Copper Piping & Piping Circuit should be with Minimum Number of joints, which shall be attained by : (i) Using One End Expanded Tubes (ii) Bending the tubes instead of using elbow joints wherever 90 degree bending is required. (2) Piping should be routed at site in such a manner, that brazed joints in the refrigeration piping are kept to a minimum. (3) The makes of tube fittings shall be same as that of tubes.(4) The thickness of fittings used shall be same as that of the pipe.

PVC insulated Drain piping ( Makes - Supreme, Astral, Trubore) Supply and erection of following PVC Drain Pipe with all joint, reducer, necessary elbows and tees, supporting arrangements etc. The rate shall inclusive of 9mm thick nitrile rubber insulation a( 25 mm (1 inch)

b) 32 mm [1 (1/4)] inch

Communication Wire Cable For AC System Supply and laying of Data communication cable from out door to all indoor units 2c 1.5 sq.mm with 25mm dia PVC Conduit with necessary accessories and fixing arrangement. ( Makes - Polycab / RR Kable / POWERFLEX)

Additional Refrigerant Gas For AC System Supply and Charging of R-410 additional refrigerant gas at site

AIR DISTRIBUTION SYSTEM GI Ducting For Air Distribution For AC System ( Makes - Tata/ Jindal or SS Make) Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. a) Thickness 0.80 mm sheet

Insulation For GI Ducting For AC System Acoustic Insulation ( Makes - ALP Aeroflex, K flex or SS make) Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.

Thermal Insulation ( Makes - ALP Aeroflex, Aerofoam or SS make) Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class “O”) insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.

FLEXIBLE DUCT CONNECTOR For AC System Supply and installation of Canvass connection between idu and duct with GI matching flanges on both sides with a provision of openable zip.

SUPPLY AND RETURN AIR GRILLE Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

ANCILLARY WORKS For AC System Support Rods For Hanging Copper pipes and Drain Pipes - Scope includes all refrigerant pipes shall be properly supported and anchored to the building structure using steel hangers, anchors, brackets and supports etc which shall be fixed to the building structure by means of inserts or expansion shields of adequate size and number including Hi Tech Supports for Refrigerant pipes (Like, rods, Anchor bolts, Threaded rods, etc.,)

a) Branch Joint Pipe

b) Copper pipe, Cable, Stand and stabilizer for hi wall unit

c) Drain Pump for Hi wall unit

d) Transportation to site, Lifting, positioning and Handing over of the VRF outdoor units.

e) Pressure Testing the System, Vacuuming and Commissioning of the entire systems

f) Non tender item if any

SUB HEAD - III - FD SYSTEM Analogue Addressable Fire Detection & Alarm System ( Makes - Edward/Honeywell/ Notifier /Siemens ) Supplying,installation,testing & commissioning of intelligent analog Addressable photo thermal detector complete with mounting base Complete as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required

Supplying,installation,testing & commissioning of fault isolator

Supplying,installation,testing &commissioning of addressable manual call point complete as required

Supplying,installation,testing & commissioning of addressable horn cum strobe complete as required

Supplying,installation,testing & commissioning of addressable Fire control module complete as required

Supplying,installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

Cabling Works (makes- Polycab / Gloster / universal or SS make) Supplying& laying of 2x1.5sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation,steel wire armouring & FRLS outer sheath complete as required

Miscellaneous Works Testing and Commissioning

Integration of Fire Detection & Alarm System with PA System and existing FD system

Public Address System (Makes- Bosch/Edward/Honeywell or SS Make) Supplying,installation,testing & commissioningof 6 zone, voice alarm controller with USB,MP3 player (including 6 zone button paging station) with seamless integration facility with mainfire alarm panel for voice evacuation complete as required

Supplying,installation,testing & commissioning of 1.5/3/6 Watts ceiling speaker complete as required

Supplying,installation,testing & commissioning of 1.5/3/6 Watts metal box ceiling / wall speaker complete as required

Supplying,installation,testing & commissioningof digital audio amplifier 75Watt, 25Vrms operating at 240Volt AC Supply complete as required

Supplying,installation,testing & commissioning of Voice command and keypad 6 zone,with microphone assembly complete as required

Cabling Works (makes- Polycab / Gloster / universal or SS make) Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs,cores and size including connections and interconnections etc. as required. speaker cableTwo pair,2-core,1.5sqmm

Miscellaneous Works Testing and Commissioning

Pooran Chand Sharma and Sons

M/s MODERN CONCEPT CONSTRUCTIONS