Repair and Renovation of all J-Series Quarters from 1 to 20 in C.C. Abohar

Dismantling brick work tile, masonry tile lining in cement

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Providing and fixing asbestos shoe for asbestos cement rain water pipe in position.

Providing and fixing asbestos cement rainwater pipe 100 mm dia with M.S. holder and clamps fixed on wall face with cement mortar 1:4 complete

Laying 10cm earth and two coats of 25 mm mud plaster with gobri leeping on top including two coats of bitumen painting at 1.65 Kg. Per Sqm

Tile terracing laid dry over roof consisitng of one layer of tiles 22.86x11.43x3.83 including grouting with cement sand mortar 1:4 top surface to be left clean after wire brushing

First class burnt brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level.

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Dismantling concrete Cement concrete plain 1:3:6 mix

Conglomerate floor 25mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling. using mechanical mixer for mixing ofmaterial

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).Size 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge.

Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Cement concrete 1:2:4

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

Providing and laying in super structure for first storey factory made with vibro-hydraulic compaction machine precast Hollow block of cement concrete setting in position with cement mortar 1:3 (1 cement:3 course sand ) including cost of hosting centering and shuttering complete as per IS:2185 (Part-1): 2005.

Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shadew ith two or more coats applied @1.43litre/10Sqm over and including base coat of water proofing Cement Paintapplied @ 2.20 Kg/10 Sqm

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in built up area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering, including the cost of dewatering of rainwater,diversion for traffic, night signals. Providing & fixing caution boards,watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects.Earth work upto 1.5 m. DepthAll classes of soil except rocky

Providing, Laying, fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 90 mm o/d pipe of 6 Kgf./sqcm

Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from out side the building plinth in 15cm layers including ramming, watering and consolidating lead upto 30 metres

Providing ISI Marked G.M ferrule as per IS:2692, drilling and tapping cast iron pipe lines of all diametres and screwing in Ferrule and connections complete in all respect. 15 mm i/d ferrule medium

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. (a) 15mm i/d

Providing , laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B Class including cost of specials (such as tees, bends, sockets, elbows etc.) , painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. 15 mm i/d

Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as perIS1879 in G.I. Pipe lines complete in all respect. 15mm i/d G.I. Union

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 15mm i/d Brass Ball valves

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) withwaste coupling complete in all respect.ectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475mm x 200 mm

Black Granite stone tiles 15 mm to 20 mm thick in skirting, risers of steps,dado walls and pillars laid in 12.5 mm thick cement mortar1:3 (1cement 3 coarses and) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti is including finishing the surface to required finish complete.

Scraping of white wash

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade

scraping of cement plaster

12.5 mm thick cement plaster 1:3

Preparation of plastered or concrete surface for painting (including sand papering the surface using ready mixed cement based wall putty by applying two or more coats to get required finish

Finishing walls cement based water soluble exterier paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. a) Doors of area 3 sqm and below

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. b) Windows of area 3 sqm and below

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. C) Clerestory windows of area 3 sqm and

Teak wood chowkats including iron hold fasts, corner straps, iron hinges, cleats, stops, wooden knobs or handles fixed in position

REPLACEMENT OF WIRES, COVER FRAMES,MODULAR SWITCHES, CONCEALED METALEXISTING RECESSED CONDUIT PIPEWIRING SYSTEM (WITH MODULAR TYPEBOXES AND OTHER ACCESSORIES IN THE ACCESSORIES) Derived from 34.01:Wiring fan point (Without fan box)

REPLACEMENT OF WIRES, COVER FRAMES,MODULAR SWITCHES, CONCEALED METALEXISTING RECESSED CONDUIT PIPEWIRING SYSTEM (WITH MODULAR TYPEBOXES AND OTHER ACCESSORIES IN THE ACCESSORIES) Derived from 34.01: Wiring light point

REPLACEMENT OF WIRES, COVER FRAMES,MODULAR SWITCHES, CONCEALED METALEXISTING RECESSED CONDUIT PIPEWIRING SYSTEM (WITH MODULAR TYPEBOXES AND OTHER ACCESSORIES IN THE ACCESSORIES) Derived from 34.01 Wiring 6Amp. wall socket point

REPLACEMENT OF WIRES, COVERFRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES) Derived from 34.01:Wiring call-bell point

Renewing glass panes with putty and nails wherever necessary Glass panes Glass panes weighing 10.75Kg/sqm

Wire Gauge 22 gauge 12x12 mesh of (140 G gauge) at site of work .Supply and placing of steel wire mesh of size (i) 2 mm -6 mm

First class burnt brick work laid in cement sand mortar 1:3 in foundation and plinth

20 mm thick cement plaster 1:3 in two coat work

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.

Providing & fixing in position on terrace (at all floor levels) HDPE tank cover for water storage tanks of approved make (to the approval of Engineer -in-charge) complete in all respect.

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.Vitreous china ware standard white pedestal for wash hand basin.

Providing and fixing in position Chinaware Indian Orisa water closet sizes 580mm (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of engineer in charge.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing & fixing 8" stainless steel towerbolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250 mm X 16mm

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS Code:15658 (2006)

Cement concrete 1:8:16 With brick ballast 32mm / 40mm gauge mixing by manual means

Precast Cement Concrete Kerb Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface

Providing and fixing in position GI Tank Nipple of approved make (to the approvel of of Engineer in charge) in PVC Water storage tanks complete in all respect. GI tank nipple 15 mm i/d.

Providing & Fixing in postion 15mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.PTMT Pillar tap

Providing & Fixing in postion 15mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. C.P. brass Bib cock 15 x 400 gm

Providing and fixing in position automatic brass ball Cock in tanks.brass ball cock with rod and plastic ball 25mm i/d

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.110mm o/d pipe

Concealed In Wall: Providing and fixing Chlorinated Polyvinyl Choloride ( CPVC) pipes as per IS 15778 ( ISI marked with the prior approval Engineer in charge)having thermal stabilty for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe withclamps at 1.00 m spacing including jointing of pipes & fittings with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer in charge.CPVC SDR 11 Pipe & fitting 20mm o/d

Providing and laying Anti-skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st qualityconforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 310 x 450 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects

Providing and fixing bamboo jaffery/ fencing consisting of superior quality 25 mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Sal wood in scantling of section 50 x 25 mm, fixed with nails and 4 mm gauge G.I. wire on existing support and coloured with green colour complete as per directions of Engineer-in-charge

Tega 11.50 cm thick formed of first class bricks on end laid in cem. sand Mortar 1:5

First class dry flat brick flooring and paving in ordinary bonded courses or in herring bond or other special courses or bond laid to template over rammed and dressed foundations and to correct longitudinal and crosss lopes as shall be required by the Engineer-in-Charge. All joints shall be thoroughly filled with dry sand grouting which shall be applied to a thickness of not less 20 mm over the surface of the flooring and brushed into the joints. All joints shall be fully filled with sand.

First class brick on edge11.50 cm thick laid in reimbursements in and on1:5 cement sand mortar.

Cement concrete 1:3:6 with stone ballast or shingle mixing by manual means

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Plastering on walls 6 mm thick cement plaster 1:3

Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping50 mm thick with 455mmx 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitu-mastic paint conforming to I.S.I complete as per standard design. Size 450 mm x 450 mm inside with RCC 455 mm x 455 mm cover and frame light duty double seal

Any Other Item

M/s Rajinder Kumar Co.

BHULLAR CONSTRUCTION CO.

SURINDER SINGH CONTRACTOR

NARINDER KUMAR BANSAL CONTRACTOR

Rajesh Kumar Middha Govt. Contractor

THE GILL SOCIETY